Dell Computer Monitor E248Wfp Users Manual User Guide Operating Instructions

E248WFP to the manual fcf23fdd-6028-4880-be80-684d7688d097

2015-02-09

: Dell Dell-Computer-Monitor-E248Wfp-Users-Manual-543271 dell-computer-monitor-e248wfp-users-manual-543271 dell pdf

Open the PDF directly: View PDF PDF.
Page Count: 30

DownloadDell Dell-Computer-Monitor-E248Wfp-Users-Manual- E248WFP Monitor User Guide Manual Operating Instructions  Dell-computer-monitor-e248wfp-users-manual
Open PDF In BrowserView PDF
Dell™ E248WFP Flat Panel Monitor User's Guide
About Your Monitor
Product Features
Identifying Parts and Controls
Monitor specifications
Plug and Play Capability
LCD Monitor Quality & Pixel Policy
Maintenance Guidelines

Solving Problems
Troubleshooting Your Monitor
Common Problems
Product Specific Problems

Appendix
CAUTION: Safety Instruction
FCC Notice (U.S. Only)
Contacting Dell™

Setting Up the Monitor
Attaching the Stand
Connecting the Monitor
Organizing the Cables
Attaching the Soundbar (optional)
Removing the Stand

  

Operating the Monitor
Using the Front Panel Controls  
Using the On-Scree Display (OSD) 
Setting the Optimal Resolution  
Using the Dell Soundbar (Optional)  
Using the Tilt
 
 

Notes, Notices, and Cautions
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, and cautions,
and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates the potential for property damage, personal injury, or death.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the caution is mandated by
regulatory authority.

Information in this document is subject to change without notice.
© 2007–2008 Dell™ Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo are trademarks of Dell Inc; Microsoft and Windows either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model E248WFP
August 2007       Rev. A02

 

Back to Contents Page
  

About Your Monitor  
Dell™ E248WFP Flat Panel Monitor 
  Product Features
  Identifying Parts and Controls
  Monitor Specifications
  Plug and Play Capability
  LCD Monitor Quality & Pixel Policy
  Maintenance Guidelines

Product Features
The E248WFP  flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:
■ 24-inch (609.6 mm) viewable area display.
■ 1920 x 1200 resolution, plus full-screen support for lower resolutions.
■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side.
■ Tilt adjustment capabilities.
■ Removable pedestal and VESA 100 mm mounting holes for flexible mounting solutions.
■ Plug and play capability if supported by your system.
■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■ Software and documentation CD includes an information file (INF), Image color Matching File (ICM), and product documentation.
■ Energy Saver feature for Energy Star compliance.
■ Security lock slot.
■ Asset Control.
■ Stand anti-theft feature.

Identifying Parts and Features
Front View

Front View
Label Description
1

Input source selection

2

Menu selection button

Front panel controls

3

Brightness & Contrast / Down(-) button

4

Auto-Adjust / Up(+) button

5

Power on/off button with LED indicator

Back View
 

Back view                                                      Back View with monitor stand

  
Label

Description/Use

1

Dell Soundbar mounting brackets 

Attach the optional Dell Soundbar.
 

2

Security lock slot  

Attach a lock to secure your monitor.

3

Stand removal button

Press to release the stand.

4

VESA mounting holes (100mm - behind
attached stand)

Use to mount monitor.

5

Barcode serial number label

Refer to this label if you need to contact Dell for
technical support.

6

Regulatory rating label 

List the regulatory approvals. 

7

Cable management opening

Help organize cables by passing them through the
holder.

Side View

 Right side
    

  Left side

Bottom View
 

Bottom view

  
Label Description
1

AC power cord connector

2

DVI connector

3

VGA connector

Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.

Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature: 
VESA Modes

Horizontal Sync

Vertical Sync

Video

Power
Indicator

Power Consumption

Normal operation

Active

Active

Active

Green

50 W (typical)

Active-off mode

Inactive

Inactive

Blanked

Amber

Less than 2 W

Off

Less than 1 W

Switch off

-

-

-

NOTE: The OSD functions only in the 'normal operation' mode. Otherwise one of the following
messages appears depending upon the selected input.

In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
Activate the computer and wake up the monitor to gain access to the OSD.

This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

VGA Connector

Pin
Number

15-pin Side of the
Connected Signal Cable

1

Video-Red  

2

Video-Green

3

Video-Blue

4

GND

5

Self-test

6

GND-R

7

GND-G

8

GND-B

9

Computer 5V/3.3V

10

GND-sync

11

GND

12

DDC data

13

H-sync

14

V-sync

15

DDC clock

DVI Connector  

Pin
Number

24-pin Side of the Connected Signal
Cable

1

TMDS RX2-

2

TMDS RX2+

3

TMDS Ground

4

Floating

5

Floating

6

DDC Clock

7

DDC Data

8

Floating

9

TMDS RX1-

10

TMDS RX1+

11

TMDS Ground

12

Floating

13

Floating

14

+5V / +3.3V power

15

Self test 

16

Hot Plug Detect

17

TMDS RX0-

18

TMDS RX0+

19

TMDS Ground

20

Floating

21

Floating

22

TMDS Ground

23

TMDS Clock+

24

TMDS Clock-

Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the
user can select different settings, but in most cases monitor installation is automatic.

Flat Panel Specifications

 

Screen type

Active matrix - TFT LCD

Screen dimensions

24 inches (24-inch diagonal viewable image size)

Preset display area:

 

Horizontal

Vertical

520 mm (20.4 inches)

325.6 mm (12.8 inches)

Pixel pitch

0.27 mm

Viewing angle

160° (Vertical) typical, 160° (Horizontal) typical 

Luminance output

400 cd/m ²(typ)

Contrast ratio

1000:1 (typ)

Faceplate coating

Antiglare with hard-coating 3H

Backlight

6 CCFLs U-type backlight. 92% wide color gamut

Response Time

5ms typical (Black to White)
 

Resolution
Horizontal scan range

30 kHz to 81 kHz (automatic)

Vertical scan range

56 Hz to 76 Hz

Optimal preset resolution

1920 x 1200 at 60 Hz

Highest preset resolution

1920 x 1200 at 60 Hz
 

Video Supported Modes
Video display capabilities (DVI playback)

Preset Display Modes

480i/ 480p/ 576i/ 576p/ 720p/ 1080i/ 1080p

The following table lists the preset modes for which Dell guarantees image size and centering:
Display Mode

Horizontal
Frequency (kHz)

Vertical Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(Horizontal/Vertical)

VGA, 720 x 400

31.5

70.1

28.3

-/+

VGA, 640 x 480

31.5

59.9

25.2

-/-

VESA, 640 x 480

37.5

75.0

31.5

-/-

VESA, 800 x 600

37.9

60.3

40.0

+/+

VESA, 800 x 600

46.9

75.0

49.5

+/+

VESA, 1024 x 768

48.4

60.0

65.0

-/-

VESA, 1024 x 768

60.0

75.0

78.8

+/+

VESA, 1152 x 864

67.5

75.0

108.0

+/+

VESA, 1280 x 1024

64.0

60.0

108.0

+/+

VESA, 1280 x 1024

80.0

75.0

135.0

+/+

VESA, 1600 x 1200

75.0

60.0

162.0

+/+

VESA, 1920 x 1200

74.5

60.0

154.0

+/-

Electrical
The following table lists the electrical specification:

Video input signals

Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance 
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance

Synchronization input signals

Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)

AC input voltage / frequency / current

100 to 240 VAC / 50 or 60 Hz + 3 Hz / 1.5 A (Max.)

Inrush current

120V: 40A (Max.)
240V: 80A (Max.)

Physical Characteristics
The following table lists the physical characteristics:

Signal cable type

D-sub: Detachable, Analog, 15pin, shipped attached to the
monitor
DVI-D: Detachable, Digital, Solid pins, shipped detached to the
monitor

Dimensions (with stand):
Height

Width

Depth
Weight 
Monitor (Stand and Head)

Monitor Flat panel only (VESA Mode)

Weight with packaging

 
436.3 mm (17.17 inches)

559.7 mm (22.04 inches)

172.0 mm (6.77 inches)

 
6.8 kg ( 14.99 lb)

5.2 kg ( 11.46 lb)

9.2 kg (20.26 lb)

Environmental
The following table lists the environmental limitation:

Temperature:
Operating

 
0° to 40°C (32° to 104°F)

Nonoperating
Humidity:
Operating

Nonoperating
Altitude:
Operating

Nonoperating
Thermal dissipation

Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
 
10% to 80% (noncondensing)

Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
 
3,657.6 m (12,000 ft) max

12,192 m (40,000 ft) max

259 BTU/hour (maximum)
171 BTU/hour (typical)

LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed
pixel that appears as an extremely tiny dark or bright discolored spot.
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered
normal and within competitive standards.  For more information, see Dell Support site at: support.dell.com.

Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the Safety Instructions before cleaning the monitor. 
CAUTION: Before cleaning the monitor, unplug the monitor from the electrical
outlet. 

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
l
l
l
l

To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a lightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.  
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your  monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor.  

  

Back to Contents Page
 

Back to Contents Page
 

Appendix
DellT E248WFP Flat Panel Monitor
  Safety Instructions
  FCC Notice (U.S. Only)
  Contacting Dell™
 

CAUTION: Safety Instructions
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
l

l

To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating 
current (AC) power available at your location:
¡

115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60
hertz (Hz)), and Taiwan.

¡

230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.

Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE: This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage
according to the ranges defined in the "Electrical Specifications" section in the User's Guide.

l

Do not store or use the monitor in locations that are exposed to heat, direct sunlight, or extreme cold.

l

Avoid moving the monitor between locations with large temperature differences.

l

Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.

l

Do not store or use the monitor in locations exposed to high humidity or dusty environment.

l

Do not allow water or other liquids to spill on or into the monitor.

l

Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.

l

Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.

l

To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.

l

Never use your monitor if the power cable has been damaged. Ensure that nothing rests on your computer's cables and that the cables are not located
where they can be stepped on or tripped over.

l

Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.

l

Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the
monitor on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor
in a bookcase or an enclosed space, be sure to provide adequate ventilation and air flow.

l

Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.

l

Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and
contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.

l

Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.

l

Locate your monitor near an easily accessible electric outlet.

l

If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.

l

Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified
service personnel.

l

High temperatures can cause problems. Don't use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources
of heat.

l

Unplug the monitor when it is going to be left unused for an extended period of time.

l

Unplug your monitor from the electric outlet before any service is performed.

l

LAMP(S) INSIDE THIS PRODUCT CONTAIN(S) MERCURY AND MUST BE RECYCLED OR DISPOSED OFF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, GO TO WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT
WWW.EIAE.ORG.

FCC Notice (U.S. Only)

FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction
manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
2.

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by DellT Inc. could void your authority to operate this
equipment.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
l
l
l
l

Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch circuits.

If necessary, consult a representative of DellT Inc. or an experienced radio/television technician for additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
l
l
l

Product name: E248WFP
Model number: E248WFPb
Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental Affairs
One Dell Way
Round Rock, Texas 78682 USA
512-338-4400

Contacting Dell™
   To contact Dell electronically, you can access the following websites and by phone:
l
l

For support through the web, go to support.dell.com.
For customers in the United States, call 800-W W W-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product
catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:
1.
2.
3.
4.
5.

Visit support.dell.com.
Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.
Click Contact Us on the left side of the page.
Select the appropriate service or support link based on your need.
Choose the method of contacting Dell that is convenient for you.

Back to Contents Page

  

Back to Contents Page
 

Setting Up Your Monitor
Dell™ E248WFP Flat Panel Monitor 

If you have a Dell™ desktop or a Dell™ portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.  
 

Back to Contents Page

Back to Contents Page
 

Setting Up Your Monitor
Dell™ E248WFP Flat Panel Monitor 

If you have non Dell™ desktop, portable computer, or graphic card
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact the manufacturer of your computer or consider purchasing a graphics adapter
that will support the video resolution of 1920x1200.   
 

Back to Contents Page

Back to Contents Page
 

Operating the Monitor
Dell™ E248WFP Flat Panel Monitor User's Guide
  Using the Front Panel Controls
  Using the On-Scree Display (OSD) Menu
  Setting the Optimal Resolution
  Using the Dell Soundbar (Optional)
  Using the Tilt

Using the Front Panel
Use the buttons on the front of the monitor to adjust the image settings. 

 
A

Use Input Source Select button to select between two different video signals that may be connected to your monitor.
l
l

VGA input
DVI-D input

Input Source Select
As you cycle through the inputs you will see the following messages to indicate currently selected input source. It may
take 1 or 2 seconds for the image to appear.

1. Auto Detect (Analog Input)

 or 
 

1. Auto Detect  (Digital Input)

2. Analog Input

  or 
 

3.Digital Input

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown
below appears.

  or    

  or    

B
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using
the OSD Menu.
OSD Menu / Select
C

Use this button for direct access to the "Brightness" and "Contrast" control menu.
Brightness /Contrast
Hot Key
C and D
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
Down (-) and Up (+)
D

Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjust In Progress
Auto Adjust
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment,
you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached
cables.
 

E
Use the power button to turn the monitor on and off. 
Power button
 (with power light 
indicator)

The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.

 

Using the OSD Menu
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those 
changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.

Push the MENU button to open the OSD menu and display the main menu.
Main Menu for Auto Detect Analog (VGA) Input

Main Menu for Auto Detect Digital (DVI) Input

 

or

Main Menu for Analog (VGA) Input

Main Menu for Digital (DVI) Input

 

or

 
NOTE: Auto Adjust is only available when you are using the analog (VGA) connector.
2.
3.
4.
5.
6.

Icon

Push the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table
below for a complete list of all the options available for the monitor.
Push the MENU button once to activate the highlighted option.  
Push - and + button to select the desired parameter.
Push MENU to enter the slide bar and then use the - and + buttons, according to the indicators on the menu, to make your changes.
Push the MENU button once to return to the main menu to select another option or push the MENU button two or three times to exit from the OSD
menu.
Menu and Submenus Description

EXIT

Select to exit the main menu.

BRIGHTNESS
& CONTRAST

Use this menu to activate Brightness/Contrast adjustment.

Brightness

Brightness adjusts the luminance of the backlight. 
Push the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100).

Contrast

Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the + button to increase contrast and push the - button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

AUTO ADJUST

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with
your particular setup.
Select to activate automatic setup and adjustment. The following dialog appears on a black screen as the monitor self-adjusts to the
current input:

Auto Adjust In Progress

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: In most cases, Auto Adjust produces the best image for your configuration. 
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
Positioning:  

Positioning moves the viewing area around on the monitor screen.

Horizontal
Vertical

When making changes to either the Horizontal or Vertical settings, no changes occur to the size of the viewing area. The image shifts in 
response to your selection. Minimum is 0 (-) and maximum is 100 (+).
 
NOTE: Horizontal and Vertical are not available when using DVI connector.

Zoom   

Use the Zoom function to zoom in to specific area of interest.
Using - and + buttons to zoom in and out.   

H Pan
V Pan

 
After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.
Using - and + buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

 
Using - and + buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

   
 
NOTE: H Pan and V Pan are not available when the value of Zoom is 0.
Image settings:

Pixel Clock (Coarse) The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main
OSD menu, by selecting 'Image Settings'.
Phase (Fine)

Us e the - and + buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use Pixel Clock (Coarse) and then use Phase (fine), again.
NOTE: This function may change the width of the display image.  Use the Horizontal function of the Position menu to center the 
display image on the screen.
NOTE: Pixel Clock and Phase are not available when using DVI connector.

Sharpness

This feature can make the image look sharper or softer. Use - or + to adjust the sharpness from '0' to '100' .

Scaling Ratio

Adjust the image ratio as 1:1, 4:3, 16:9 or Fill (full screen).
 
NOTE: This adjustment is not required and not available at optimal preset resolution 1920 x 1200.

Color Settings

Color Settings adjusts the color temperature.

Color Management

Color Management is On by default. When Color Management is disabled, four modes are available: Normal Preset, Red Preset, Blue Preset,
User Preset
  Color Management On

or

Color Management Off   

                   
Color Settings Mode  Under the model, you can choose Graphics or Video according to what the signal input is. If PC is connected to your monitor, please select
Graphics; if DVD or STB or VCR is connected to your monitor, Video is recommended.
 
When Graphics is selected, you can choose Normal Preset, Multimedia Preset, Gaming Preset, sRGB Preset, Red Preset, Blue Preset, User
Preset
 
l
l
l
l
l
l
l

Normal Preset: Default (factory) color settings;
Multimedia Preset: Mode suitable for PC media application such as photo,clip etc;
Gaming Preset: Mode suitable for PC gaming application;
sRGB Preset:  Standard default color space for sRGB;
Red Preset is selected to obtain a reddish tint. This color setting is used for color-intensive applications (photograph image editing,
multimedia, movies, etc.);
Blue Preset is selected to obtain a bluish tint. This color setting is used for text based applications (spreadsheets, programming, text
editors, etc.);
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100;

 
When Video is selected, you can choose Theatre Preset, Sports Preset or Nature Preset.

l
l
l

Hue

Theatre Preset: Mode suitable for movie playback;
Sports Preset: Mode suitable for sports programme;
Nature Preset: Mode suitable for nature scenes. User can adjust the Hue (Tint)/Saturation based on the preference.   

This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to adjust
the hue from '0' to '100' .
- makes video image shade into greenish
+ makes video image shade into purplish
NOTE: Hue adjustment only available for video input.

Saturation

This feature can adjust the color saturation of the video image. Use - or + to adjust the saturation from '0' to '100' .
- makes video image looks more monochrome
+ makes video image looks more colorful
NOTE: Saturation adjustment only available for video input.

Advanced Settings:

Input Color Format

Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or a DVI cable. Choose the YPbPr+ option if monitor is
connected to a DVD by a YPbPr cable.

OSD Settings:

Adjust the settings for the OSD, including the location, the amount of time the menu remains on-screen, and the rotation of the OSD.
Position of the OSD:

Horizontal Position

l

To adjust the horizontal position of the OSD, use the - and + buttons, and move OSD to the left and right.

l

To adjust the vertical position of the OSD, use the - and + buttons, and move OSD down and up.

 
Vertical Position
 
OSD Hold Time

OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the length of time the OSD remains active after the last time
you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.

OSD Lock

OSD Lock: 
Controls user access to adjustments. When Yes (+) is selected, no user adjustments are allowed. All buttons are locked except the menu
button.
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock selected.
Select No (-) to unlock and allow user access to all applicable settings.

NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds.

Language

Select to have the OSD display in one of five languages (English, French, Spanish, German, or Japanese).

Factory Reset:

Reset the OSD menu options to  the factory preset values. 

Exit

Select to exit out of Reset to Factory Settings menu without resetting any OSD options.

NOTE: The change only affects the OSD. It has no effect on any software running on the computer.

Position settings only Change the settings for Image Position back to original factory settings.

Color settings only

Change the Red, Green, and Blue settings back to their original factory settings and set  the default setting for Normal Preset.

All settings

Change all the user-adjustable settings including color, position, brightness, contrast and OSD hold time  to the factory defaults. The 
language of the OSD does not change.

IR

This feature will help reduce minor cases of image retention.
 
Enable LCD Conditioning: If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention.
Using the LCD Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning
feature does not remove burn-in.

 

NOTE: Use LCD Conditioning only when you experience a problem with image retention.

Below warning message appears once user select “Enable LCD Conditioning”:

NOTE: Press any button on the monitor to terminate LCD Conditioning at any time.

DDC/CI

Enable the DDC/CI control function.
DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor parameters (brightness, color balance, etc) via
software applications on your PC.
Default is "Enable". You can disable this feature by selecting "Disable".
For best user experience and optimum performance of your monitor, keep this feature enabled.
NOTE: If user select "Disable", display Warning message box as below. Select "Yes" disable DDC/CI
and return to "Factory Reset" menu. Warning message time-out in 20 sec.

 

OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.
1. Auto Detect (Analog Input)
Cannot Display This Video Mode
Optimum Resolution 1920 x1200 60Hz

 or 
 

1. Auto Detect  (Digital Input)
Cannot Display This Video Mode
Optimum Resolution 1920 x1200 60Hz

2. Analog Input
Cannot Display This Video Mode
Optimum Resolution 1920 x1200 60Hz

  or 
 

3.Digital Input
Cannot Display This Video Mode
Optimum Resolution 1920 x1200 60Hz

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to
use.  See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 X 1200 @ 60Hz. 
NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a video signal. 

   or     

   or     

Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.
See Solving Problems for more information.

Setting the Optimal Resolution
1.
2.
3.
4.

Right-click on the desktop and select Properties.
Select the Settings tab.
Set the screen resolution to 1920 x 1200.
Click OK.

If you do not see 1920 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell desktop or portable computer:
¡

Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.

If you are using a non-Dell computer (portable or desktop):
¡
¡

Go to the support site for your computer and download the latest graphic drivers.
Go to your graphics card website and download the latest graphic drivers.

Using the Dell Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays.  The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.

1.

Power/volume control

2. 

Power indicator

3.

Headphone connectors

Using the Tilt
With the built-in pedestal, you can tilt the monitor to best suit your viewing needs.

 
Back to Contents Page

Back to Contents Page
 

Setting Up Your Monitor
Dell™ E248WFP Flat Panel Monitor 

Important instructions to set the display resolution to 1920x1200 (Optimal)
For optimal display performance while using the Microsoft Windows® operating systems, set the display resolution to 1920 x 1200 pixels by performing the
following steps:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1920x1200.
4. Click OK.
    If you do not see 1920x1200 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the
computer system you are using, and follow the provided directions:
1: If you have a Dell™ desktop or a Dell™ portable computer with internet access.
2: If you have non Dell™ desktop, portable computer, or graphic card.
 

Back to Contents Page

Dell™ E248WFP Flat Panel Monitor 
 

User Guide
Important instructions to set the display resolution to 1920x1200 (Optimal) 
 

Information in this document is subject to change without notice.
© 2007–2008 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, are trademarks of Dell Inc; Microsoft and Windows either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark
of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
M o d el E248WFP
August 2007        Rev. A02

Back to Contents Page
 

Setting Up the Monitor
Dell™ E248WFP Flat Panel Monitor 
  Attaching the Stand
  Connecting the Monitor
  Organizing Your Cables
  Attaching the Soundbar (optional)
  Removing the Stand 
 

Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.

  

Place the stand on a flat surface and follow these steps to attach the monitor stand:
1.
2.

Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.

Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.
To connect your monitor to the computer perform the following steps/instructions:
l
l

Turn off your computer and disconnect the power cable.
Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with 
appropriate video systems. 

 
Connecting the white DVI cable

Connecting the blue VGA cable

 
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.

After you have completed connecting the DVI/VGA cable, follow the procedure below to complete your monitor setup:
l
l
l

Plug the power cables for your computer and monitor into a nearby outlet.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
Use the cable management opening on the monitor stand to organize the cables.

Organizing Your Cables
 

 
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management hole to
neatly organize all cables as shown above.

Attaching the soundbar

1.
2.
3.
4.
5.

Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.  
Slide the Soundbar to the left until it snaps into the place.  
Connect the Soundbar with the power brick.
Plug the power cables of the power brick into a nearby outlet.  
Insert the lime green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE: Do not use with any device other than Dell Soundbar
NOTE: Soundbar Power Connector +12V DC output is for optional only.

Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the stand,  ensure that the monitor is placed on a clean surface.

 

After placing the monitor panel on a soft cloth or cushion, press and hold the LCD removal button, and then remove the stand.
 

Back to Contents Page
 

Back to Contents Page
 

Solving Problems
Dell™ E248WFP Flat Panel Monitor 
  Monitor Specific Troubleshooting
  Common Problems
  Product Specific Problems
 
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
 

Troubleshooting Your Monitor
 Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1.
2.
3.

Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove the Analog (blue connector) cables from the back of
computer.
Turn on the monitor.
The floating 'Dell - Self-Test Feature Check' dialog box should appear on-screen (against a black background) if the monitor cannot sense a video
signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs
shown below will continuously scroll through the screen.
  

  or    

  or    

 
4.
5.

This box also appears during normal system operation if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning
properly.
 

OSD Warning Messages
For OSD-related issues, see OSD Warning Messages

Common Problems
The following table contains general information about common monitor problems you might encounter.

Common Symptoms

What You
Experience
No Video/ Power LED off No picture

Possible Solutions
l
l
l

No Video/ Power LED on No picture or no
brightness

l
l
l

Poor Focus

Picture is fuzzy,
blurry, or ghosting

l
l
l
l
l

Shaky/Jittery Video

Wavy picture or
fine movement

l
l
l
l
l

Missing Pixels

Stuck-on Pixels

Brightness Problems

LCD screen has
spots

l

LCD screen has
bright spots

l

Picture too dim or
too bright

l

l

l

l
l

Geometric Distortion

Screen not
centered correctly

l
l
l

Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
Verify that the power outlet is functioning properly using any other electrical equipment.
Ensure that the power button depressed fully.
Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video cable connector.
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Eliminate video extension cables.
Reset the monitor to Factory Settings.
Change the video resolution to the correct aspect ration (16:10).
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Reset the monitor to Factory Settings.
Check environmental factors.
Relocate the monitor and test in another room.
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.

NOTE: When using 'DVI-D', the positioning adjustments are not available.
Horizontal/Vertical Lines Screen has one or
more lines

l
l
l
l
l

Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check and determine if these lines are also in self-test mode.
Check for bent or broken pins in the video cable connector.

NOTE: When using 'DVI-D', the Pixel Clock and Phase adjustments are not available.
Synchronization Problems Screen is
scrambled or
appears torn

l
l
l
l
l
l

Safety Related Issues

Intermittent Problems

Missing Color

Visible signs of
smoke or sparks

l

Monitor
malfunctions on &
off

l

Picture missing
color

l

l

l
l

l
l

Wrong Color

Picture color not
good

l
l
l

Image retention  from a 
static image left on the
monitor for a long period 
of time

Faint shadow from
the static image
displayed appears
on the screen

l

Input auto switching to
another source

Can't select input
source

l

l

Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode.
Check for bent or broken pins in the video cable connector.
Restart the computer in the safe mode.
Do not perform any troubleshooting steps.
Contact Dell immediately.
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Reset the monitor to Factory Settings.
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.

Perform monitor self-test feature check.
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Check for bent or broken pins in the video cable connector..
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending to the
application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the
Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
Use the Power Management feature to turn off the monitor at all times when not in use (for more
information, see Power Management Modes).
Alternatively, use a dynamically changing screensaver.
Under "Auto Detect" mode if one of the DVI or VGA signal is lost(or cable disconnected) the display will
automatically switch to the other input source where a signal exist.

  

Product Specific Problems
SPECIFIC SYMPTOMS

WHAT YOU EXPERIENCE

Screen image is too small

Image is centered on screen, but does not fill entire

POSSIBLE SOLUTIONS
l

Reset the monitor to factory settings using

viewing area

Cannot adjust the monitor with
the buttons on the front panel

OSD does not appear on the screen

the All Settings option.

l

l

 
 
 

Back to Contents Page

Turn off the monitor, unplug the power
cord, plug back, and then turn on the
monitor.
The OSD Lock is On. Press the menu button
for 15 seconds to unlock the OSD menu.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : DELL E248WFP Monitor User Guide Manual Operating Instructions
Create Date                     : 2012:02:15 05:18:46Z
Keywords                        : "DELL E248WFP, DELL E248WFP Monitor Pdf, DELL E248WFP User Guide Manual, DELL E248WFP Operating Instructions"
Modify Date                     : 2013:08:09 10:34:57+03:00
Businesskeywords                : manual# guide# doc# documentation# Open Manage# OM# user's guide# users guide# Solution# systems management# BIOS# license# readme# read me# release notes# dell# Dell# software
Categorypathforfutureproducts   : 
Creationdate                    : D:20120215051846
Expirydate                      : 9999-09-09 00:00:00
Filesize                        : 1513
Futureproductindication         : No
Languagecodes                   : en-us
Manualurl                       : http://ftp.dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/dell-e248wfp_User's Guide_en-us.pdf
Moddate                         : D:20121019063546-05'00'
Productcode                     : dell-e248wfp
Publishdate                     : 2009-03-01 00:00:00
Readytocopy                     : false
Sectioncode                     : 
Sectiondescription              : 
Typecode                        : ug
Typedescription                 : User's Guide
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : DELL E248WFP Monitor User Guide Manual Operating Instructions
Description                     : DELL E248WFP Monitor User Guide Manual Operating Instructions
Title                           : DELL E248WFP Monitor User Guide Manual Operating Instructions
Subject                         : DELL E248WFP, DELL E248WFP Monitor Pdf, DELL E248WFP User Guide Manual, DELL E248WFP Operating Instructions
Metadata Date                   : 2013:08:09 10:34:57+03:00
Producer                        : Expert HTML to PDF Converter 7.0; modified using iTextSharp 5.1.3 (c) 1T3XT BVBA
Document ID                     : uuid:1324b821-c87b-4d3a-93b4-b5f22c23b65e
Instance ID                     : uuid:fda5cc75-b460-4d82-a4da-0256095418ca
Page Layout                     : OneColumn
Page Mode                       : UseNone
Page Count                      : 30
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu