Dell P14F Notebook Computer (with RFID radios) User Manual 2 of 2
Dell Inc. Notebook Computer (with RFID radios) 2 of 2
Dell >
Contents
- 1. User manual 1of 2
- 2. User manual 2 of 2
User manual 2 of 2
![](/img.php?id=1377206&img=bg1.png)
FCC Radiation Exposure Statement
WARNING: The radiated output power of Dell RFID devices is far below the FCC
radio frequency exposure limits. Nevertheless, Dell RFID devices should be used in
such a manner that the potential for human contact during normal operation is
minimized.
This device has also been evaluated for and shown compliant with the FCC RF
exposure limits under portable exposure conditions (antennas are within 20 cm of a
person's body) when installed in certain specific OEM configurations. Details of the
authorized configurations can be found at http://www.fcc.gov/oet/fccid/help.html
by entering the FCC ID number on the device.
Interference Statement
These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject
to the following two conditions: (1) The devices may not cause harmful interference, and
(2) The devices must accept any interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If the equipment is
not installed and used in accordance with the instructions, the equipment may cause
harmful interference to radio communications. There is no guarantee, however, that such
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception (which can be determined by turning
the equipment off and on), the user is encouraged to try to correct the interference by
taking one or more of the following measures:
xRelocate this device.
xIncrease the separation between the device and the receiver.
xConnect the device into an outlet on a circuit different from that of other
electronics.
xConsult the dealer or an experienced radio technician for help.
NOTE: Dell RFID devices must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that comes with
the product. Any other installation or use will violate FCC Part 15 regulations.
Modifications not expressly approved by Dell could void your authority to operate
the equipment.