Dell Poweredge C4130 EMC Servers Troubleshooting Guide User Manual Power Edge C6320p User's Guide15 En Us
User Manual: Dell poweredge-c4130 - Dell EMC PowerEdge Servers Troubleshooting Guide
Open the PDF directly: View PDF
Page Count: 98
- Dell EMC PowerEdge Servers Troubleshooting Guide
- Introduction
- Diagnostic indicators
- Status LED indicators
- System health and system ID indicator codes
- iDRAC Quick Sync 2 indicator codes
- iDRAC Direct LED indicator codes
- NIC indicator codes
- Power supply unit indicator codes
- Non-redundant power supply unit indicator codes
- Hard drive indicator codes
- uSATA SSD indicator codes
- Internal dual SD module indicator codes
- Running diagnostics
- Troubleshooting hardware issues
- Troubleshooting no power issues
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting a serial I/O device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting an internal USB key
- Troubleshooting an SD card
- Troubleshooting an optical drive
- Troubleshooting a tape backup unit
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Troubleshooting hard drives
- Troubleshooting system memory
- Troubleshooting memory module issues
- Prerequisites to follow when installing or upgrading memory
- Memory population guidelines
- Memory modes
- Correctable and uncorrectable errors
- System stops responding during POST after upgrading or installing a memory module
- How to resolve unsupported or mismatched memory module error messages reported during POST on a PowerEdge system?
- Troubleshooting power supply units
- Troubleshooting RAID
- RAID configuration using OpenManage Server Administrator
- RAID configuration by using Unified Server Configurator
- Downloading and installing the RAID controller log export by using PERCCLI tool on ESXi hosts on Dell’s 13th generation of PowerEdge servers
- Configuring RAID by using Lifecycle Controller
- Starting and target RAID levels for virtual disk reconfiguration and capacity expansion
- Reconfiguring or migrating virtual disks
- Foreign Configuration Operations
- Viewing Patrol Read report
- Check Consistency report
- Virtual disk troubleshooting
- Troubleshooting memory or battery errors on the PERC controller on Dell PowerEdge servers
- Slicing
- RAID puncture
- Blank or skipped RAID configuration screen during SMTD DVD installation
- Troubleshooting thermal issue
- Server management software issues
- How to set up Auto Dedicated NIC feature?
- How do I configure RAID using operating system deployment wizard?
- How to set up e-mail alerts?
- How to export license using iDRAC web interface?
- How to specify language and keyboard type?
- How to configure network settings using Lifecycle Controller?
- What are the different types of iDRAC licenses?
- What are the differences between iDRAC7 and iDRAC8?
- Can I upgrade the iDRAC license from express to enterprise and BMC to express?
- How to activate license on iDRAC?
- How to find out missing licenses?
- How to update BIOS on 13th generation PowerEdge servers?
- Which are the operating systems supported on PowerEdge servers?
- Troubleshooting operating system issues
- Getting help