Delonghi Ec 155 Instruction Manual _ZANELLAG02

Delonghi-Gb-5732145800-Owner-S-Manual delonghi-gb-5732145800-owner-s-manual

: Delonghi Delonghi-Ec-155-Instruction-Manual-715688 delonghi-ec-155-instruction-manual-715688 delonghi pdf

Open the PDF directly: View PDF .
Page Count: 7

6

SHORT CORD INSTRUCTIONS

- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a

longer cord.

- Longer, detachable power supply cords or extension cords are available and may be used if care is

exercised in their use.

- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating

of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be

a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over

the counter-top or table top where it can be pulled on by children or tripped over.

- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the

following:

• Read all instructions.

• Do not touch hot surfaces. Use handles and knobs.

• To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in

water or other liquid.

• Never allow the appliance to be used by children.

• Unplug from the outlet when not in use and before cleaning. Allow to cool before fitting or taking off parts,

and before cleaning the appliance.

• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged

in any manner. Return the appliance to the nearest authorized service facility for examination, repair or

adjustment.

• The use of accessory attachments or spare parts not recommended by the appliance manufacturer may

result in fire, electrical shock or personal injury.

• Do not use outdoors.

• Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.

• Do not place on or near a hot gas or electrical burner, or in a heated oven.

• Plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.

• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic use

only. Any other use is to be considered improper and therefore, dangerous.

• DO NOT unscrew or remove boiler cap while the machine is in operation. Wait until brewing cycle is

completed and all water and steam has been used up.

WARNING: To reduce the risk of fire or electric shock, do not remove the cover.

No user serviceable parts inside. Repair should be done by authorized service personnel only!

SAVE THESE INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY

7

Read this manual thoroughly before installing and

using the appliance.

This is the only way to ensure best results and

maximum safety for the user.

DESCRIPTION

(see figure on page 3).

The terminology below will be used repeatedly on the

following pages.

1Filter holder for ground coffee or pods

2Large filter for 2 cups ground coffee

3Small filter for 1 cup ground coffee or pods

4Steam knob

5Tamper

6Cup tray

7Power cable

8OK indicator light (coffee/hot water or steam

temperature)

9Appliance on light ( )

10 Function selector knob

11 Coffee/hot water delivering position ( )

12 Off position

13 Steam position ( )

14 Coffee measuring spoon

15 Boiler outlet

16 Steam/hot water tube

17 Cappuccino frother

18 Water tank

19 Water tank lid

SAFETY WARNINGS

• This appliance is designed to "make espresso coffee"

and "heat drinks". Use with care to avoid scalds

from the water and steam jets or through incorrect

use.

• This appliance is intended for domestic use only. Any

other use is considered improper and thus

dangerous.

• The manufacturer cannot be held responsible for any

damage caused through incorrect, wrong or

unreasonable use.

• When using the appliance, do not touch the hot

surfaces.Use the knobs or handles only.

• Do not touch the appliance with wet or damp hands

or feet.

• Do not allow children or unfit persons to use the

appliance unsupervised.

• Never allow children to play with the appliance.

• In the event of malfunction or faulty operation, switch

off and unplug from the outlet.

If it requires repair, contact an authorized service

center only and ask for original spare parts to be

used.

Failure to respect the above could reduce the safety

of the appliance.

INSTALLATION

• After removing the packaging, make sure the

product is complete and undamaged. If in doubt, do

not use the appliance and contact a qualified

professional.

• The packing elements (plastic bags, polystyrene

foam, etc.) should be kept out of reach of children as

they are a safety hazard.

• Place the appliance on a work surface far away from

water taps, basins and sources of heat.

• After positioning the appliance on the work top,

leave a space of at least 2 inches between the

surfaces of the appliance and the side and rear walls

and at least 8 inches above the coffee maker.

• Never install the appliance in environments where

the temperature may reach 32°F or lower (the

appliance may be damaged if the water freezes).

• Check that the voltage of the mains power supply

corresponds to the value indicated on the appliance

rating plate.

Connect the appliance to an efficiently earthed

socket with a minimum current rating of 10 A only.

The manufacturer may not be considered liable for

possible incidents caused by the failure to

adequately earth the mains.

• If the plug fitted to the appliance does not match the

power socket, have the socket replaced with a

suitable type by a qualified professional.

• The power cable on this appliance must not be

replaced by the user as this operation requires the

use of special tools. If the cable is damaged or

requires replacing, contact an authorized service

center only to avoid all risks.

8

HOW TO MAKE ESPRESSO COFFEE

FILLING THE WATER TANK

1. Open the water tank lid (fig. 1) and then take out

the tank by pulling upwards (fig. 2).

2. Fill the tank with fresh clean water taking care not

to exceed the MAX level (fig. 3).

Replace the tank, pressing lightly to open the valve

located on the bottom of the tank.

3. More simply, the tank can also be filled without

removing it, pouring the water directly from a jug

(fig. 1).

IMPORTANT: It is normal for there to be water in the

space under the tank. This should therefore be dried

regularly with a clean sponge.

Note: Never use the appliance without water in the

tank and always remember to top up when the level

drops about an inch from the bottom.

PREHEATING THE COFFEE UNIT

To obtain espresso coffee at the right temperature, the

coffee machine must be preheated. Turn the selector

knob to the position (fig. 4) at least 15 minutes

before making the coffee, making sure the filter holder

is attached to the appliance (check that the steam knob

is closed).

To attach the filter holder, position it under the boiler

outlet with the handle towards the left (see fig. 5), push

it upwards and at the same time firmly rotate the

handle towards the right.

Wait for half an hour, then make the coffee as

described in the following chapter.

Alternatively, preheating can be achieved more rapidly

proceeding as follows:

1.Turn the appliance on by rotating the selector knob to

the position (fig. 4) and attach the filter holder to

the appliance without adding ground coffee.

2.Place a cup under the filter holder. Use the same cup

as will be used to prepare the coffee in order to

preheat it.

3.Wait for the OK indicator light to come on (fig. 6),

then immediately rotate the selector knob to the

position (fig. 7), deliver water until the OK indicator

light goes out, then interrupt delivery by rotating the

selector knob to the position (fig. 6).

4.Empty the cup. Wait until the OK indicator light

comes on again then repeat the same operation.

HOW TO PREPARE ESPRESSO COFFEE USING THE

FILTER HOLDER FOR GROUND COFFEE

IMPORTANT: the first time the appliance is used, all

accessories and the internal circuits must be washed

through by making at least five coffees without using

ground coffee.

1.After preheating the appliance as described above,

place the ground coffee filter in the filter holder,

making sure the projection is correctly inserted in the

slot as shown in fig. 8.

Use the smaller filter to make one coffee or the larger

filter to make two coffees.

2.To make a single coffee only, place one level measure

of ground coffee, about 7 grams, in the filter (fig. 9).

To prepare two coffees, place two loosely filled

measures of ground coffee (about 12 grams) in the

filter. Fill the filter a little at a time to prevent the ground

coffee from overflowing.

IMPORTANT: for correct operation, before adding the

ground coffee to the filter holder, clean the filter from

residues of ground coffee from the previous infusion.

3.Distribute the ground coffee evenly and press lightly

with the tamper (fig. 10). Note: Correct tamping of

the ground coffee is essential to obtain a good

espresso. If tamping is excessive, coffee delivery will

be slow and the crema will be dark. If pressing is too

light, coffee delivery will be too rapid and the froth

will be sparse and light colored.

4.Remove any excess coffee from the rim of the filter

holder and attach the filter holder to the appliance.

Rotate firmly (fig. 5) to avoid leaks of water.

5.Place the cup or cups (ideally preheated by rinsing

with a little hot water) under the filter holder spouts

(fig. 11). You are recommended to heat the cups

before making the coffee by rinsing them with a little

hot water or placing them to warm on the top plate

for at least 15-20 minutes (fig. 12).

6.Make sure the OK light (fig. 6) is on (if off, wait until

it comes on), then turn the knob to the position

(fig. 7) until the required quantity is obtained. To

interrupt, place the selector knob back in the position

(fig. 4).

7.To remove the filter holder, rotate the handle from

right to left.

IMPORTANT: to avoid splashes, never remove the

filter holder while the appliance is delivering

coffee.

8.To eliminate the used coffee grounds, block the filter

in place using the lever incorporated in the handle

and empty the coffee by turning the filter holder

upside down and tapping (fig. 13).

9.To turn the appliance off, rotate the selector knob to

the "O" position (fig. 14).

IMPORTANT: the first time the appliance is used, all

accessories and the internal circuits must be washed

through by making at least five coffees without using

ground coffee.

HOW TO PREPARE ESPRESSO COFFEE USING PODS

(FOR APPLIANCES WITH TWO FILTERS ONLY)

1.Preheat the appliance as described in the section

"PREHEATING THE COFFEE UNIT", making sure the

filter holder is attached; this obtains a hotter coffee.

NOTE: use pods conforming to the ESE standard,

indicated on the pack by the following symbol:

The ESE standard is a system accepted by leading pod

producers and enables espresso coffee to be prepared

simply and cleanly.

2.Place the small 1 coffee or pod filter in the filter

holder, making sure the projection is correctly

inserted in the slot as shown in fig. 8.

3.Insert a pod, centering it as far as possible on the

filter (fig. 15).Always follow the instructions on the

pod pack to position the pod on the filter correctly.

4.Attach the filter holder to the appliance. Always

rotate as far as it will go (fig. 5).

5.Proceed as in points 5, 6 and 7 in the previous

section.

HOW TO MAKE CAPPUCCINO COFFEE

1.Prepare the espresso coffees as described in the

previous paragraphs, using sufficiently large cups.

2.Rotate the selector knob to the position (fig. 16)

and wait until the OK light comes on (fig. 6). This

indicates that the boiler has reached the ideal

temperature for steam production.

3.In the meantime, fill a frothing pitcher with about 3.5

ounces of milk for each cappuccino to be prepared.

The milk must be at refrigerator temperature (not

hot!). In choosing the size of the frothing pitcher,

bear in mind that the milk doubles or triples in

volume.

NOTE: YOU ARE RECOMMENDED TO USE SKIM AT

REFRIGERATOR TEMPERATURE.

4.Place the frothing pitcher containing milk under the

cappuccino maker (fig 17).

5.Immerse the cappuccino frother in the milk for about

5 mm and rotate the steam knob counter clockwise

(fig. 18) (rotating the knob more or less varies the

quantity of steam discharged by the cappuccino

maker). The milk now starts to increase in volume

and take on a creamy appearance.

6.When the milk has doubled in volume, immerse the

cappuccino frother deeply and continue heating the

milk (fig. 19). When the required temperature is

reached (the ideal is 140°F), interrupt steam delivery

by rotating the steam knob clockwise and placing the

selector in the "O" position (fig. 14).

7.Pour the frothed milk into the cups containing the

espresso coffee prepared previously. The cappuccino

is ready. Sweeten to taste and if desired, sprinkle the

froth with a little cocoa powder.

Note: to make coffee again after the milk has been

frothed, cool down the boiler first or the coffee will

be burnt. To cool, place a container under the boiler

outlet, turn the selector to the " " position and

deliver water until the OK light goes out. Turn the

selector back to the position and make the coffee as

described previously.

IMPORTANT: always clean the cappuccino maker

after use. Proceed as follows:

1.Discharge a little steam for a few seconds by rotating

the steam knob (fig. 18).

2.Wait several minutes for the steam tube to cool

down. Unscrew the cappuccino frother by rotating

clockwise (fig. 20) and wash thoroughly with warm

water.

3.Make sure the three holes in the cappuccino frother

shown in fig. 21, are not blocked. If necessary, clean

with a pin.

4.Clean the steam tube, taking care to avoid burns.

5.Screw the cappuccino frother back in place.

HOT WATER PRODUCTION

1.Turn the appliance on by rotating the selector knob to

the position (fig. 4).

2.Place a cup under the cappuccino frother.

3.When the OK indicator light comes on, turn the

selector knob to the position (fig. 7) and at the

same time, rotate the steam knob counter clockwise

(fig. 18): Hot water is delivered from the cappuccino

maker.

4.To interrupt delivery of hot water, rotate the steam

knob clockwise and position the selector knob to "O"

9

10

CLEANING AND MAINTENANCE OF THE

FILTER

About every 200 espressos or when the espresso drips

out of the filter holder or not at all, clean the ground

coffee filter holder as follows:

• Remove the filter from the filter holder.

• Clean the inside of the filter holder. Never wash in

a dishwasher.

• Remove the filter cap (fig. 22) by unscrewing in the

direction indicated by the arrow on the cap.

• Remove the filter from the container by pushing it

from the cap end.

• Remove the gasket.

• Rinse all components and clean the metal filter

thoroughly in hot water using a brush (fig. 23).

Make sure the holes in the metal filter are not

blocked. If necessary, clean with a pin (see fig. 24)

• Replace the filter and gasket on the plastic

disk as shown in fig. 25. Make sure to insert the pin

on the plastic disk into the hole in the gasket

indicated by the arrow in fig. 26.

• Replace the resulting assembly in the steel filter

container (fig. 26), making sure the pin is inserted

into the hole in the support (see arrow in fig. 26).

• Finally, screw on the cap (fig. 27).

Failure to clean as described above invalidates the

warranty.

CLEANING THE BOILER OUTLET

About every 300 coffees, the espresso boiler outlet

must be cleaned as follows:

• Make sure the appliance is not hot and that it is

unplugged from the outlet.

• Using a screwdriver, unscrew the screw connecting

the espresso boiler outlet filter (fig. 28);

• Clean the outlet filter thoroughly in hot water using a

brush.

Make sure the holes are not blocked. If necessary,

clean with a pin (fig. 24).

Failure to clean as described above invalidates the

warranty.

IMPORTANT: during cleaning, never immerse the

coffee machine in water. It is an electrical appliance.

DESCALING

You are recommended to descale the espresso machine

about every 200 coffees.

You should use a commercially available product

specifically for descaling espresso coffee machines.

If such a product is not available, proceed as follows.

1.Fill the tank with 17 ounces of water.

2.Dissolve 2 spoonfuls (about 1 ounce) of citric acid

(obtainable online or in a pharmacy).

3.Rotate the selector knob to the position and wait

until the OK indicator light comes on.

4.Make sure the filter holder is not attached and

position a container under the boiler outlet.

5.Rotate the selector knob to the position (fig. 7)

and deliver half the solution in the tank.

Then interrupt the flow by rotating the selector to the

"O" position (fig. 14).

6.Leave the solution to work for about 15 minutes, then

deliver the rest of the water in the tank.

7.To eliminate residues of solution and scale, rinse the

tank well, fill with clean water and replace in

position.

8.Rotate the selector knob to the position and

deliver the water until the tank is completely empty;

9.Rotate the selector knob to the position and

repeat operations 7 and 8 again.

Repair of damage to the coffee machine caused by

scale is not covered by the guarantee unless descaling

is performed regularly as described above.

11

No milk froth is formed when

making cappuccino

• Milk not cold enough.

• Cappuccino frother is dirty.

• Always use skim milk at refrigerator

temperature.

• Thoroughly clean the holes in the

cappuccino frother in particular

those indicated in figure 21.

PROBLEM POSSIBLE CAUSES SOLUTION

No espresso coffee is

delivered

• No water in the tank.

• The holes in the filter holder spouts

are blocked.

• The espresso boiler outlet is blocked.

• The filter is blocked.

• The tank is incorrectly inserted and

the valve on the bottom is not open.

The espresso coffee drips

from the edges of the filter

holder rather than the holes

• The filter holder is inserted incorrectly.

• The espresso boiler gasket has lost

elasticity.

• The holes in the filter holder spouts

are blocked.

• Attach the filter holder correctly and

rotate firmly as far as it will go.

• Have the espresso boiler gasket

replaced at a service center.

• Clean the spout holes.

The espresso coffee is cold • The espresso OK indicator light was

not on when the coffee switch was

pressed.

• No preheating performed.

• The cups were not preheated.

• Wait until the espresso OK indicator

light comes on.

• Preheat as described in the

paragraph "Preheating the espresso

coffee unit".

• Preheat the cups.

The pump is excessively noisy • The water tank is empty.

• The tank is incorrectly inserted and

the valve on the bottom is not open.

•Refill the tank.

•Press the tank down lightly to open

the valve on the bottom.

• Fill the tank with water.

• Clean the spout holes.

• Clean as described in the chapter

"Cleaning the boiler outlet".

• Clean as described in the section

"Cleaning the filter".

• Press the tank down lightly to open

the valve on the bottom.

The coffee froth is too

light (delivered from the

spout too fast)

• The ground coffee is not pressed

down firmly enough.

• There is not enough ground coffee.

• The ground coffee is too coarse.

• Incorrect type of ground coffee.

• Press the ground coffee down more

firmly (fig.5).

• Increase the quantity of ground

coffee.

• Use ground coffee for espresso

coffee machines only.

• Change the type of ground coffee.

The coffee froth is too dark

(delivered from the spout too

slowly)

•The ground coffee is pressed down

too firmly.

•There is too much ground coffee.

•The espresso boiler outlet is blocked.

•The filter is blocked.

•The ground coffee is too fine.

•The coffee is damp or ground too

fine.

•Incorrect type of ground coffee.

•Press the coffee down less firmly (fig.

6).

•Reduce the quantity of ground coffee.

•Clean as described in the chapter

"Cleaning the espresso boiler outlet".

•Clean as described in the section

"Cleaning the filter".

•Use ground coffee for espresso coffee

machines only.

•Use only ground coffee for espresso

coffee machines. Make sure it is not

damp.

•Change the type of ground coffee.

12

This warranty applies to all products with De’Longhi or Kenwood brand names.

LIMITED WARRANTY

What does the warranty cover?

We warrant each appliance to be free from defects in material and workmanship. Our obligation under this

warranty is limited to repair at our factory or authorized service center of any defective parts or part thereof,

other than parts damaged in transit. In the event of a products replacement or return, the unit must be returned

transportation prepaid. The repaired or new model will be returned at the company expense.

This warranty shall apply only if the appliance is used in accordance with the factory directions, which

accompany it, and on an Alternating current ( AC ) circuit.

How long does the coverage last?

This warranty runs for one year ( 1 ) from the purchase date found on your receipt and applies only to the

original purchaser for use.

What is not covered by the warranty?

The warranty does not cover defects or damage of the appliance, which result from repairs or alterations to

the appliance outside our factory or authorized service centers, nor shall it apply to any appliance, which has

been subject to abuse, misuse, negligence or accidents. Also, consequential and incidental damage resulting

from the use of this product or arising out of any breach of contract or breach of this warranty are not

recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or

consequential damage, so the above limitation may not apply to you.

How do you get service?

If repairs become necessary, see contact information below:

U.S. Residents:

Please contact our toll free hotline at 1-800-322-3848 or log onto our website at www.delonghi.com.

For all accessories, spare parts or replacement parts, please contact our parts division at 1-800-865-6330.

Residents of Canada:

Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www.delonghi.com.

Residents of Mexico:

Please refer to the Limited Warranty statement for Mexico.

Please refer to the back page of the manual for De’Longhi addresses.

The above warranty is in lieu of all other express warranties and representations. All implied warranties are

limited to the applicable warranty period set forth above. This limitation does not apply if you enter into an

extended warranty with De’Longhi. Some states do not allow limitations on how long an implied warranty

lasts, so the above exclusions may not apply to you. De’Longhi does not authorize any other person or

company to assume for it any liability in connection with the sale or use of its appliance.

How does state law apply?

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to

state.