| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 66202 |
| Application ID | NSarCkAbhVOSzFpPgzAKiw== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 16.89kB (211130 bits) |
| Date Submitted | 1999-10-25 00:00:00 |
| Date Available | 1998-09-17 00:00:00 |
| Creation Date | 2001-05-24 23:54:45 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-24 23:54:51 |
| Document Title | 66202.pdf |
| Document Author: | jsoscia |
DH -—‘L5() SEWES
i1 User's Guide
1 High Resolution Color Monitor
FCC H): H7905 —4§(,
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply With the limits for a
class-B digital device. pursuant to Part [5 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and
it" not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference“ in not occur inapanicular installation.
lfthis equipment does cause harmful interferotce to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient orrelocate the receiving antenna,
— Increase the separation between the equipmentand receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiveris connected.
— Consultthe dealer or an experienced radio/TV technician forhelp
Warning-
— lt is essential that only the supplied power cord be used.
-Use only shielded signal cablesto connect I/O devices tothis equipment
—You are cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void by your authority to operate
the equipment.
1 TABLE’QF CONTENTS
1. Intggduiction ,,,,,, , ‘
2. Installation \
3, ,OpezgiQL,,,,, , ,
4. Specificatign, ,, , W
5. Additional Information
Introduction
DB~156 AA is a high performance digital color monitor for use
with IBM PC/XT/AT and PS/2 computers or compatiables with
analog RGBoutput.
Contents of purchase
llmrDB—456 AA pad/(age inc/tides [he {ml/mung
- DB-45t’: AA high performance colormonitor.
- Power cord.
. User's guide
Features
a True multi scanning ability allows automatic tracking of
horizontal frequencies from 30 to 57 KHz and vertical
frequenciesfrom50t0120Hz.
- Microprocessor based controls save your adjustments for each
video mode There is no need to make adjustments every ttme
you use y ourcomputer.
- Ten factory preset modes are available for image size and
positioning
. Ten additional timings are user definable for a total of 20
timingsetting.
. Digital conirol system Horizonial size/center Veriical
size/center Pincushion Trapezoid are adjustable to adapt to
avariety ofgraphic cards.
- Fine phosphor pitch provides greater imageclarify.
' Equipped withDDCl. DDCZB forplugfirplay compatibility.
0 Universal powersupply inputofAC 100~240V 50/601-lz.
- Power management circuit conforms to VESA DPMS
standards and controls energy consumption when the monitor
isnor in use.
- Automatic dcgaussing circuit which activates when the
monitoris turned-on at cold start.
alr-
V DiménEiEniE W" ' \
i From View Side View ‘ Top View 1
3 Width: 350 mm Depm: 350 mm 1 Deplh: 380 mm
: Height: 360 mm ‘
Base: 240 mm Till § SwivelAngIe
UP: 12“ 1 LEFT: 90°
DOWN: 5“ ‘ RIGHT: 90° 1
‘
n 350 mm
FRON I'
mzm ‘
lnstallqtiqn
‘ Caution:
‘ Be sure 10 turn ojflhc AClmwer m the martin”
befnrz making connection
1 1 Assemblcthctillswivelbaseasshow below
1 Cannecuhe powercord as show below
3. Connect (he end oflhe signal cable 10 the dlsplay connector of
computerand tighlen the screws as show below,
4 Turn monitor on andthen mm computer on
E!
m computes RG
<7"
v0 AC na/mv Pcwew
‘ axis
Vfiéing the right? prbw'er'cord’for 230VAC
For units used at 120V .' Use a UL iiSl cord set consisting of a
minimun No,|8 AWG,Type SVT or SJT rated 6A minimum
125V. lhrec conductor cord a maximum of IS fl in length and a
parallel blade, grounding type atlachmsntplug,
For units used at 230V(domestic use) Use a UL list Cord set
consisting ufa minimun No.18 AWG,Type SVT or SJT, rated 3A
minimum 250Vl, three conductor cord a maximum of 15 ft in
lenglh andatandem blade, groundingtype attachmentpiug
For units used at230V(oulsideofU.S ): Use a cord set consisting
ofa minimun N04 1 S AWG cord and grounding type attachment
plug rated 3A minimum 250V The card set should have the
approprime safety approvals for the country in which the
equipmemwillbeinstalledandmarkedHAR.
Tilt/swivel base
Turn the monitor to a comfortable viewing angle within 180
degreeshonzomally andl7degree5venically.
Signal input connector(15 pin mini D-sub)
Cannect to Ihe display adapter output of a computer having
analogvideo output.
AC input connector(Appliance coupler)
Connect to AC oullet w ith supplied power cord
“4-
,, Operation
vuwzn mm».
ac! mm v-A 4
L mm
LED1 LEDZ MODE
‘ | vows»; m;
v A 4 P
O O Fundinn1 Brlghlnass- Bngmness+ Cunlrast — Contrasl +
Q Q Fundionz VrSuze — V—Slze + H-Slze 7 H-Slze +
O . Funamna vfiosmon— V—Poswtion + H—Posnion f H»Posmnn +
. . Funcuontl Trapszmd — Tvapezold + Pmcusmon ~ Pmcushlon +
1 LED . “On 0 on LEDBnnszdlustumn
‘ / (3 Recall all fat-jury mesa! data
Q!
/ (2) Recall Contrasuangmness factory presemala only
7 Description
Brightness {i}
The Bri hlness option adjusts the image brightness. the black
leveloft ebackground.
LED1 LED2 E) lncreasesihebrightnessofiheimage
O O E) Decreasesthebrightness ofthetmage
Contrast )
The Contrast option ad usts the contrast between the background
andtheforegroundoft eimage.
LED1 LED2 ® lncreasesthecontrastoflhe image
O O (I)Decreasestheccntrastofthcimage.
‘ The Horizontal Size option adjusts the width ol'the screen.
LED1 LED2 (2 lncreasesthe width ofthe screen.
Horizontal Size Control
I . O E Decreasesthewtdth ofihe screen
Horizontal Center Control
The Horizontal Centermovesthe screen left or right.
LED1 LED2 E) Moves the screentoright.
O . (1) Moves thescreentoleft.
Vertical Size Control
The Vertical Size option adjusts the hetght oflhe screen.
LED1 LED2 E) lncreasestheheighlofthe screen.
. O E Decreasestheheightot'the screen.
“65“
Vertical Center Control
TheVertical Cenlcrmovesthe screen upordownv
LED1 LED2 E) Moves thescreenroupr
O O (3 Moves the screen todown
Pincushion Control
The Pincushion option slraighrens the vertical side oflhe screen,
LED1 LED2 (I) Curveslhescreen'svsnica]edgesoutward.
0 O (E Curvesthescrcen's vertical edgesinward.
Trapezoid Control
The Trapezoid oplion adjusls |hc venicn] sides of Ihe screen's
parallel.
E Widens Ihe screen at lhe top and narrows a!
LED1 LEDZ the bonom.
. . E) Nanowsthe screen at (hemp and widens al
the bottom.
Recall
The Recall oprmn resets all yuur adjustmenls to factory senings,
mm”
V Factory Preset Timings
Timing Chart
The DB—456 AA digital monitor can run at extensive range of
resolutions and refresh rates Certain standard resolutions are
factory preset, There are also fourteen timings Wthh are user
definable, For example, if your video card is set up to run 1024
pixels x 768 lines at an 60 Hzrefresh rate, once you have adjusted
the screen size and position to your preferences the monitor will
save this information to memory Every time you run this
resolution at this refresh rate. the monitor will recall your
adjustments.
The followmg table lists the maximum refresh rates at which the
DB—456 AA will operate at a number of standard resolutions.
While the monitor is capable ofthis level ofperformance, not all
video cards are capable of running at these high refresh rates.
Please see your video card user's guide to ensure cumpatiblity,
The following table lists the factory preset timings:
l‘x’l’ifilli! Finn this; ‘
m Hz ‘
Modu I am WW i757
Mnch 7 3m 70
Made 3 an x m) s| 47 so
Mudc4 800x600 siixii ii 7766
Mode 5 m x 4m 737i)?” 85
Mudcb iathm 4326 is
Mode 7 1024 x 762! 48 35 «0
Mode t 300 x 600 53,07 is 4+
mazes]
vVVPlug and Play
The 03456 AA digital monitor supports DDC (Display Data
Channel) I/ZB standard, and the monitor [5 self-installing when
used with a DDC compatible video card.
DDC IS a protocol which allows the monitorlo communicate with
the video card. The monitor sends the factory preset modes to the
video card. Then‘ a table is created which matches the maximum
refresh rates ofthe monitor with those ofthe video card. When
you choose a resolution in Windows 95, the monitor will
automatlcally run at it’s hlgh refresh rate.
Power Management System
The DB-456 AA monitor supports EPA or VESA (option) power
management function, indicated by the LED on the front panel.
1 State LED Color Canifimm“ Ref-11,12” 1
1 ,,,,,,,, ,, WWW r
ON Green Vorma] — 1
, W,” 77, , 1
Standby/Suspend Amber <15 w <3 sec 1
1 7777ng 7 7 Amber < 5 w 758 m 1
The monitor remains in the power saving state until you press any
key on the keyboard or move the m ouser The power consumption
and recovery time vary as indicated above.
all)“
013-450 AA
SIIC I4" 1 I) 2” VKflahk diagonal],
CRT Dcflcdmn 7mm - 90 degrees
Phnaphor Plth 0 23 mm
Graphns Slandanh rummnhulm XGA sflm SuptrVi7A;V(1/\ v smsoomum
chnlulmnthw
my} 758 (Nun-Imurlnccd)
Vldt’l) Bum] wmmmm Kale)
Hun/lal 40K ‘TKHZ
Vzmcal 347m my]? 7 7 ,,
Vndeo-RGR Analog u Why/75 uhms [mum/c
chc T“
Unlumucd
suchmmmnon
lnpul tlgnal
mm; Culum
Fanory Sclhng libmmufl \ l9lvnle)
DISP'fl} Area Large Scan lBUmmLHW \ ZHYmley
mn
‘0mm(W) \ soummun \ 3)((lmm(Di
“my“ Ncl u lkg~ We» ”Dig;
hmepmnch Bn lhlnesz ("unmask
User ("nnlmh and Tnnmnn H-mc H-cenlcr v m: V—Lcnlcr Pmuhhmn
Trapbuud
‘l‘cmpcmurc ‘ l(l(' m 401”
Operfiung Cumhlmm Hnmld , ‘ mfl/n 94m
W W ,, Almude jjmnmma , 7
Tempemure ] [vc in arc
Smmgu(nnmnum Humulu) ‘ |u%— 95m,
7 ,, , /\||||udc 1 1mmrm 7
‘ ON 7 » Gm“
PnflerSaungleUmudt 1 S‘andby/Suspcnd , , «Amher
, 0! | >Alnbcr , ,,
Lampmmlc “uh me thh) Dam Channel
oum Tmlurcs mm and DIX'ZB
Pla\ my Wmdmugfi/ “’lrld0\\:95
NO] L' 1113-456 BA 15 a] mx-Radxanon MPH ll ilandard
“10m
7 Input Pin Assignmént
6OOOOO'O
Pin No Signal
1 RED VIDEO
2 GREEN VIDEO
3 BLUE VIDEO
4 NC
5 GROUND
6 RED VIDEO RETURN
7 GREEN VlDEO RETURN
8 BLUE VIDEO RETURN
9 NC
10 GROUND
11 NC
12 SDA
13 HORIZONTAL SYNC
14 VERTICAL SYNC (VCLK)
15 SCL
M1155!
Additional lnformantion
HelpfulHints
-Avoid exposing Ihe monilor to direct sunlight or other heat
source.
-Keep me monitor away from magnets. motors, nansformers.
speakers, andlelevisions.
430 no! place heavy objects on lhecable orpowercurd.
Safety Tips
-lfs|nol
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : Yes
Create Date : 2001:05:24 23:54:45
Producer : Acrobat Distiller 4.0 for Windows
Author : jsoscia
Title : 66202.pdf
Modify Date : 2001:05:24 23:54:51-04:00
Page Count : 16
EXIF Metadata provided by EXIF.tools