Delta Electronics orporated DFBM-NQ62X DFBM-NQ620-DT0R User Manual FCC Statement 0901

Delta Electronics Incorporated DFBM-NQ620-DT0R FCC Statement 0901

Users Manual_revised0901

DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 1 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 1Datasheet DFBM-NQ62X-DT0R A Bluetooth Low Energy System On Chip Module.
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 2 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change Contents 1. Features ........................................................................................................................................... 3 1-1. General ......................................................................................................................................... 3 1-2. Bluetooth...................................................................................................................................... 3 2. Model No. Definition ...................................................................................................................... 4 3. Block Diagram ................................................................................................................................ 6 4. General Specification ...................................................................................................................... 7 5. Electrical Characteristics ................................................................................................................. 8 5-1. Absolute Maximum Rating .......................................................................................................... 8 5-2. Recommended Operating Conditions .......................................................................................... 8 6. RF Characteristics ........................................................................................................................... 9 6-1. Bluetooth RF characteristics ........................................................................................................ 9 6-2. Antenna Performance ................................................................................................................... 9 7. Pin Description .............................................................................................................................. 10 8. Reference Circuit .......................................................................................................................... 12 8-1. Standard Mode ........................................................................................................................... 12 9. Module Dimensions ...................................................................................................................... 13 10. Recommend Soldering Conditions ............................................................................................... 14 11. Layout Guide................................................................................................................................. 15 12. Recommended Land Pattern ......................................................................................................... 16 13. Required End Product Labeling .................................................................................................... 17 14. Manual Information to the End User ............................................................................................ 17 15. Federal Communications Commission (FCC) Statement ............................................................. 17
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 3 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change DFBM-NQ62X-DT0R BLE SoC Module his document describes the DFBM-NQ62X-DT0R wireless BLE SoC module hardware specification. The modules provide cost effective, low power, and flexible platform to add BLE for embedded devices for a variety of applications, such as wireless sensors and thermostats. It uses BLE SoC, which integrating the 2.4GHz transceiver, a 32 bit ARM® Cortex M4F CPU, flash memory, and analog and digital peripherals. 1. Features 1-1. General  BLE chip with a single chip antenna or an external RF connector  Integrate a 32 bit ARM® Cortex M4F CPU,512KB flash memory and 64KB RAM  Extra 512KB flash memory for user data storage (Optional)  32.768KHz Real Time Clock (Optional)  12-bit 200kspc ADC - 8 configurable channels with programmable gain  30 General Purpose I/O Pins  Two-wire Master (I2C compatible) support 100K bps and 400K bps  UART baud rate up to 921600 bps  SPI bit rate up to 4M bps  Quadrature Decoder (QDEC)  LGA 36 pin package  Dimension 19.0mm(L) x 11.0mm(W) x 1.8 mm(H)  RoHS compliant 1-2. Bluetooth  Bluetooth 4.2 specification compliant  AES HW encryption T
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 4 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 2. Model No. Definition D F B M - N Q 6 2 X - DT 0 R E = Pb free R = RoHS N = NG L = Process with Lead Customer code Version Lead Free 2 = Class 2 Dimension Chip Type M = Module B = Bluetooth F = FR4 D = DELTA Q = QFN BT Chip Product-typProperty Substrate Company N = Nordic 0 = Chip Ant+ Flash+ RTC 1 = RF Connector+ Flash+ RTC 2 = Chip Ant+ RTC 3 = RF Connector+ RTC 4 = Chip Ant 5 = RF Connector DT = Delta Version 6 = V4.2 0 = Consumer Application Serial Number
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 5 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change Detail Part Number of Module Part Number Antenna Type Storage Flash (512KB) Real Time Clock (RTC) Chip Antenna RF Connector DFBM-NQ620-DT0R O O O DFBM-NQ621-DT0R O O O DFBM-NQ622-DT0R O O DFBM-NQ623-DT0R O O DFBM-NQ624-DT0R O DFBM-NQ625-DT0R O
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 6 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 3. Block Diagram Figure 3-1. DFBM-NQ620-DT0R Block Diagram
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 7 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 4. General Specification Standard Bluetooth: V4.2 Frequency 2.402 ~ 2.48 GHz Modulation GFSK Data Rate BLE: 0.25, 1, 2 Mbps Operating Temperature -40~+85 ℃ Storage Temperature -40~+125 ℃ Antenna Impedance 50 ohm Package Size 19.0 X 11.0 X 1.8 mm Host Interface UART, SPI, I2C Table 4-1. General Specification
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 8 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 5. Electrical Characteristics 5-1. Absolute Maximum Rating Symbol Min. Max. Units VDD_3V3 -0.3 3.9 V VGPIO -0.3 3.9 V ESD-HBM 4 KV ESD-CDM 750 V Table 5-1. Absolute Maximum Rating 5-2. Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VDD_3V3 Supply Voltage 1.7 3.3 3.6 V System On, Standby mode 3.5 mA TX Current at POUT = +0 dBm 6.5 mA RX Current 7.0 mA Current in SYSTEM OFF, no RAM retention. 1.2 uA Current in SYSTEM OFF mode 32 kB RAM retention. 1.0 uA SYSTEM-ON base current with 32 kB RAM enabled. 1.5 uA Table 5-2. Bluetooth Power Consumption
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 9 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 6. RF Characteristics 6-1. Bluetooth RF characteristics Condition: VDD_3V3=VIO=3.3V, T=25℃ Item Condition Min. Typ. Max. Unit RF Characteristics Output Power -20 0 4 dBm Initial Frequency Offset -75 75 KHz Carrier Frequency Offset and Drift CFOD -150 150 KHz Modulation Characteristics Modulation Index (F1 / F2) 0.8 N/A F1 Average 225 275 KHz F2 Maximum 185 KHz Sensitivity PER < 30.8% -96 -70 dBm Maximum Input Level PER < 30.8% -10 dBm Table 6-4. Bluetooth RF Characteristics 6-2. Antenna Performance Item Specification Working Frequency Range 2450 ± 50 MHz Peak Gain (dBi) Chip Antenna: +2dBi External Antenna: +2dBi Antenna Type Chip Antenna / External Antenna (Dipole) VSWR Less than 2.8 Table 6-5. Antenna Characteristics
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 10 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 7. Pin Description Pin Definition Function Description 1 GND Gnd Ground 2 P0.25 Digital I/O Bluetooth general purpose I/O pin 3 P0.26 Digital I/O Bluetooth general purpose I/O pin 4 P0.27 Digital I/O Bluetooth general purpose I/O pin 5 P0.28 Digital I/O Bluetooth general purpose I/O pin 6 P0.29 Digital I/O Bluetooth general purpose I/O pin 7 P0.30 Digital I/O Bluetooth general purpose I/O pin 8 P0.31 Digital I/O Bluetooth general purpose I/O pin 9 GND Gnd Ground 10 VDD_3V3 Power VDD power supply input 11 GND Gnd Ground 12 GND Gnd Ground 13 GND Gnd Ground 14 P0.02 Digital I/O Bluetooth general purpose I/O pin 15 P0.03 Digital I/O Bluetooth general purpose I/O pin 16 P0.04 Digital I/O Bluetooth general purpose I/O pin 17 P0.09 Digital I/O Bluetooth general purpose I/O pin 18 P0.10 Digital I/O Bluetooth general purpose I/O pin 19 P0.11 Digital I/O Bluetooth general purpose I/O pin 20 P0.12 Digital I/O Bluetooth general purpose I/O pin 21 P0.13 Digital I/O Bluetooth general purpose I/O pin 22 P0.14 Digital I/O Bluetooth general purpose I/O pin 23 P0.15 Digital I/O Bluetooth general purpose I/O pin 24 GND Gnd Ground
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 11 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 25 P0.16 Digital I/O Bluetooth general purpose I/O pin 26 P0.17 Digital I/O Bluetooth general purpose I/O pin 27 P0.18 Digital I/O Bluetooth general purpose I/O pin 28 P0.19 Digital I/O Bluetooth general purpose I/O pin 29 P0.20 Digital I/O Bluetooth general purpose I/O pin 30 P0.21 Digital I/O Bluetooth general purpose I/O pin 31 SWDCLK Digital input Hardware debug and flash programming I/O 32 SWDIO Digital I/O System reset (active low). Also hardware debug and flash programming I/O 33 P0.22 Digital I/O Bluetooth general purpose I/O pin 34 P0.23 Digital I/O Bluetooth general purpose I/O pin 35 P0.24 Digital I/O Bluetooth general purpose I/O pin 36 GND Gnd Ground Table 7-1. Pin Description
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 12 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 8. Reference Circuit 8-1. Standard Mode Figure 8-1. DFBM-NQ62X-DT0R Reference Circuit
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 13 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 9. Module Dimensions Figure 9-1. DFBM-NQ62X-DT0R Module Dimension
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 14 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 10. Recommend Soldering Conditions Figure 10-1. Reflow temperature Profile No. Item Temperature (°C) Time (sec) 1 Pre-heat Tsmin: 150 °C ~ Tsmax: 200°C ts: 60 ~ 120 2 Soldering TL: >= 217°C tL: 60~150 3 Peak-Temp. Tp: 260 °C tp: 30 Table 10-2. Reflow temperature Profile Parameters
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 15 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 11. Layout Guide 1. All traces can fan out directly. 2. To have basic radiation performance. Recommend to keep antenna area (below red block, 11.0 mm x 4.2 mm) clean and 5 mm extended. 3. To have better radiation performance, more clearance area is needed. Recommend to keep any metal out from antenna clearance and 20 mm extended. 4. Thickness of system board will make antenna resonant frequency shift. Recommend thickness of system board is 1.0mm which resonant frequency is 2.5GHz. Resonant frequency will be close to 2.45GHz after assembly in plastic housing. Figure 11-1. Layout Guide Figure 11-2. Thickness of system board Antenna Clearance Area Extend 20mm Extend 20mm Extend 20mm
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 16 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 12. Recommended Land Pattern Figure 12-1. Recommended Stencil Aperture
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 17 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change 13. Required End Product Labeling Any device incorporating this module must include an external, visible, permanent marking or label which states: “Contains FCC ID: H79DFBM-NQ62X.” 14. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in this manual. 15. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
DFBM-NQ62X-DT0R Preliminary Data Sheet Sheet 18 of 18 Aug. 16, 2016 Proprietary Information and Specifications are Subject to Change -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Navigation menu