Delta Electronics Network Device Gen Users Manual 04_2 1~3 1_15P 80327
Delta-Network-Device-Gen-Users-Manual-244673 delta-network-device-gen-users-manual-244673
GEN to the manual f10d9b9b-fd6a-437b-9e71-dc96f56bff71
2015-01-24
: Delta-Electronics Delta-Electronics-Network-Device-Gen-Users-Manual-338857 delta-electronics-network-device-gen-users-manual-338857 delta-electronics pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
SNAP-IN MOUNTING HIGH PERFORSERIES MANCE IEC CONNECTOR FILTERS INTRODUCTIONS SPECIFICATIONS 1. Snap-in mounting type to reduce labor cost. Compact and reliable at low cost. 2. Bleeder resistor can be added with suffix "-R" on part numbers,except G3H,G3V,W3V,G3J,W3J,types. 3. Optional side snap-in mounting clip type with suffix (H) on part numbers. 4. All part numbers are UL recongnized, CSA certified and VDE approved. COMPONENTS * INSERTION LOSS (TYPICAL) Cx (uF) L (mH) 6.5 2.5 2.5 4 0.8 1.5 0.8 0.2 0.4 0.3 0.2 0.2 0.3 0.1 ** *** UL, CSA approved to 4A 115/250V UL, CSA approved to 8A 115/250V VDE approved to 8A/250V IEC INLET FILTERS 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.2mA @ 250VAC 50Hz: 0.4mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC 5. With optional Y-Cap from 100pF to 3300pF. 6. Safety under apply for 03/06/10GENG3U(H) series. PART NO. 01GENG3E/W3E/-R 03GENG3E/W3E/G3U(H)/-R 03GENW3ES/-R 03GENG3Q/W3Q/-R 06GENG3E/W3E/G3U(H)/-R 06GENG3Q/W3Q/-R 06GENW3ES/-R 10GENG3E/W3E/G3U(H)/-R 10GENG3C/W3C/-R 10GENG3Q/W3Q/-R 10GENW3ES/-R 15GENG3E/W3E/-R 20GENG3E/W3E/-R V D E * ** *** Cy (pF) R( ) 03GENG3E 06GENG3E COMMON MODE COMMON MODE DIFF. MODE DIFF. MODE 80 dB 2200 1M 60 dB 40 dB 20 dB UL, CSA approved to 13A 115/250V VDE approved to 10A/250V VDE approved to 16A/250V 0 dB 10K 100K 1M 10M MINIMUM INSERTION LOSS IN dB COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 1A 28 35 38 38 3A 20 25 30 38 6A 12 18 24 35 6A (G3Q) 15 20 24 35 10A 4 10 13 28 10A (G3C) 10 15 15 25 10A (G3Q) 10 12 15 30 15A 4 10 13 28 20A 8 10 15 25 20GENG3E 10 40 40 40 40 35 30 32 35 30 COMMON MODE DIFF.MODE 80 dB 30 40 40 40 55 40 35 45 40 35 60 dB 40 dB 20 dB ELECTRICAL SCHEMATIC 0 dB L N L' L I N E R Cx Cy Cy G L O A D N' G' R: 1M /-R ONLY 2-7 10K 100K 1M 10M PANEL Suggested thickness of mounting panel is from 0.0315 (0.8) to 0.063 (1.6) inch(mm) of mounting cutout PCB ASSEMBLY FROM FRONT MECHANICAL CONSTRUCTION 0.84MAX. 21.4MAX. L N G 0.862 0.004 21.9 0.1 1.66MAX. 42.16MAX. 2.1MAX. 53.4MAX. +0.012 1.12 - 0 +0.3 28.45 - 0 R0.08MAX. R2.0MAX. 0.0315~0.06 0.8~1.6 SUGGESTED MOUNTING CUTOUT NG3E, NG3C, NG3Q (Optional wire type) 1.12 MAX. 28.4 MAX. GENG3E L 0.84MAX. 21.4MAX. 1.22 0.02 31.0 0.5 N G +0.04 0.142 - 0.02 +1.0 3.6 - 0.5 0.945 0.02 24.0 0.5 0.85 0.004 21.5 0.1 2.1MAX. 53.4MAX. 1.66MAX. 42.16MAX. R0.08MAX(2X) R2.0MAX 1.16 0.004 29.5 0.1 0.0315~0.063 0.8~1.6 SUGGESTED MOUNTING CUTOUT NG3E(H), NG3C(H), NG3Q(H) (Optional wire type) 1.12 MAX. 28.4 MAX. GENG3E(H) G 0.94 0.02 24.0 0.5 N L 0.80 0.02 20.4 0.5 1.22 0.02 31.0 0.5 +0.04 0.11-0.02 +1.0 2.8-0.5 R0.08MAX. R2.0MAX. 1.94 0.04 49.4 1.0 1.50 0.02 38.0 0.5 0.85 0.004 21.9 0.1 0.8~1.6 1.12 0.02 28.4 0.5 1.16 0.004 29.5 0.1 NG3U(H) (With Compact Size) 31.0 0.5 1.12 MAX. 0.84MAX. 21.3MAX. 24.0 0.5 +0.012 1.12 - 0 +0.3 28.45 - 0 R0.08MAX. R2.0MAX. 0.0315~0.06 0.8~1.6 SUGGESTED MOUNTING CUTOUT BLUE NW3ES G/Y 28.4 MAX. 0.862 0.004 21.9 0.1 1.22 0.2 +0.04 0.142 -0.02 +1.0 3.6 -0.5 N G 1.575 MAX. 40.0 MAX. L 0.945 0.02 NG3U(H) BROWN NW3ES 2.60MAX. 66.0MAX. 0.138 3.5 3.19MAX. 81.0MAX. 20GENG3E (Optional wire type) 2-8 +0.02 1.043-0 +0.5 26.5-0 1.496MAX. 38.0MAX. 1.18 30.0 1.36MAX. 34.5MAX. 0.248X0.031 6.3X0.8 1.04MAX. 26.5MAX. IEC INLET FILTERS +0.04 0.142 - 0.02 +1.0 3.6 - 0.5 0.945 0.02 24.0 0.5 1.22 0.02 31.0 0.5 R0.118MAX. R4.0MAX. +0.02 1.417-0 +0.5 36.0-0 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM REVERSE) ALL WIRE LEADS 4.0" LONG MIN. UNIT: INCH mm
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6a6201f3-6bdd-42b0-a735-be6d847ba4fb Modify Date : 2008:06:25 14:10:54+08:00 Create Date : 2008:06:25 14:10:46+08:00 Metadata Date : 2008:06:25 14:10:54+08:00 Document ID : uuid:16ef9d3f-41e7-47f9-adf4-c09515619810 Format : application/pdf Title : 04_2-1~3-1_15P-80327 Creator : CorelDRAW Version 9.397 Author : OPC Producer : Corel PDF Engine Version 9.397EXIF Metadata provided by EXIF.tools