Delta Electronics EASYWIFI WiFi Router for EasyST User Manual EasyWiFi

Download:
Mirror Download [FCC.gov]
Document ID	644141
Application ID	UqAszerVEoiMX7cmMsXNtg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.61kB (1182636 bits)
Date Submitted	2006-04-05 00:00:00
Date Available	2006-04-04 00:00:00
Creation Date	2006-03-20 16:43:53
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-03-31 17:20:11
Document Title	EasyWiFi
Document Creator	(Acrobat PDFMaker 6.0 for Word)
Document Author:	Mike

The Innovation Behind Broadband Wireless
IP-based
Broadband Wireless Access (BWA) System
EasyWiFi
WiFi Extension
Module for the EasyST Unit
Hardware Installation Guide
Connecting the World
Pub. No.
01
02
Date
Dec-05
03-06
Revision Record: EasyWiFi
Update Description
First edition. Author: MD
Additional Input: Author: MF
Publication No. : 18120511-01
© Copyright by Airspan Networks Inc., 2005. All rights reserved worldwide.
The information contained in this document is proprietary and is subject to all relevant copyright, patent and other
laws protecting intellectual property, as well as any specific agreement protecting Airspan Networks Inc. rights in
the aforesaid information. Neither this document nor the information contained herein may be published,
reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of
Airspan Networks Inc. In addition, any use of this document or the information contained herein for any purposes
other than those for which it was disclosed is strictly forbidden.
Airspan Networks Inc. reserves the right, without prior notice or liability, to make changes in equipment design or
specifications.
Information supplied by Airspan Networks Inc. is believed to be accurate and reliable. However, no responsibility
is assumed by Airspan Networks Inc. for the use thereof nor for the rights of third parties which may be effected in
any way by the use thereof.
Any representation(s) in this document concerning performance of Airspan Networks Inc. product(s) are for
informational purposes only and are not warranties of future performance, either express or implied. Airspan
Networks Inc. standard limited warranty, stated in its sales contract or order confirmation form, is the only warranty
offered by Airspan Networks Inc. in relation thereto.
This document may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in
relation thereto unless specifically undertaken in Airspan Networks Inc. sales contract or order confirmation.
Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If
you have encountered an error, please notify Airspan Networks Inc. All specifications are subject to change
without prior notice.
Headquarters:
Airspan Networks Inc.
777 Yamato Road
Suite 105
Boca Raton, FL 33431
USA
Tel: (+1) 561 893 8670
Fax: (+1) 561 893 8671
Web site: www.airspan.com
Main Operations:
Airspan Communications Ltd.
Cambridge House
Oxford Road
Uxbridge
Middlesex
UB8 1UN
United Kingdom
Tel: (+44) 1895 467 100
EasyWiFi
This page is intentionally left blank.
EasyWiFi
Contents
Contents
About this Guide .................................................................................................... iii
1.
Introduction .............................................................................................. 1-1
2.
Physical Description ................................................................................ 2-1
2.1. Physical Dimensions ........................................................................... 2-1
2.2. Ports .................................................................................................... 2-2
2.3. WiFi Antenna....................................................................................... 2-4
2.4. Mounting Parts .................................................................................... 2-5
2.5. LEDs ................................................................................................... 2-6
3.
Attaching EasyST..................................................................................... 3-1
4.
Connecting to LAN................................................................................... 4-1
5.
Mounting ................................................................................................... 5-1
5.1. Desktop Mounting ............................................................................... 5-2
5.2. Wall Mounting...................................................................................... 5-3
6.
Connecting Power.................................................................................... 6-1
6.1. Changing the AC/DC Power Adapter's Prongs ................................... 6-2
6.2. Connecting AC/DC Power Adapter ..................................................... 6-3
7.
Resetting EasyWiFi .................................................................................. 7-1
A.
FCC Interference Statement ....................................................................A-1
B.
Glossary ....................................................................................................B-1
C.
EasyWiFi Specifications ..........................................................................C-1
D.
Power Adapter Specifications.................................................................D-1
18120511-01
Airspan Networks Inc.
EasyWiFi
Contents
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
ii
About this Guide
This chapter describes the purpose, targeted audience, referenced documentation,
and typographical conventions of this document.
Purpose
This guide provides a description of the EasyWiFi extension module as well as
instructions for installing the module.
Targeted Audience
This guide is intended for the end-user installing the EasyWiFi extension module for
the EasyST. This device requires no professional installation.
Typographical Conventions
This guide uses the following typographical conventions:
Convention
Meaning
Example
Bold
Command, menu, icon, button, and field
Click the Next
button.
"To" in bold face and
at the beginning of a
sentence
Introduces a numbered procedure
To download a SW
file:
Warning that provides information that can
prevent and avoid bodily or mechanical harm
--
Note that provides useful information
--
18120511-01
Airspan Networks Inc.
iii
EasyWiFi
Contents
Customer Service
For service and support for your EasyWiFi, contact your regional Airspan
representative or Airspan's Technical Assistance Center (TAC) at:
„ Web site (Support Request Form):
http://www.airspan.com/Ultra/ContactForm/airspansupportform.asp
„ Americas: (+1)-561-893-8679
„ International: (+44)-1895-467 467
18120511-01
Airspan Networks Inc.
iv
Introduction
The EasyWiFi extension module allows you to add extra functionality to your
EasyST unit:
„ WiFi capabilities based on 802.11b and 802.11g
„ Four Ethernet LAN switches (10/100BaseT)
„ DC power
The EasyST is easily plugged onto the EasyWiFi extension module by means of a
30-pin IDC connector.
The EasyWiFi is powered by an AC/DC adapter that is plugged directly into a
standard electrical wall outlet (110/220 VAC). In addition, the adapter's plug prongs
can be easily removed, and then replaced to suite electrical sockets of the country in
which the unit is being installed.
18120511-01
Airspan Networks Inc.
EasyWiFi
Introduction
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
1-2
Physical Description
This chapter provides a physical description of the EasyWiFi extenson module.
2.1. Physical Dimensions
The physical dimensions of the EasyWiFi are listed in the table below:
Table 2-1: EasyWiFi physical dimensions
Parameter
Value
Dimensions
(height x width x length)
30 x 125 x 125 mm
Weight
210 grams
18120511-01
Airspan Networks Inc.
EasyWiFi
Physical Description
2.2. Ports
The EasyWiFi provides various ports on its side panel, as described in the table
below:
Table 2-2: Easy WiFi port descriptions
Port
Label
8-pin RJ-45 (x four)
lan1, lan2, lan3, lan4
10/100BaseT Ethernet LAN
DC power jack
power
6 VDC power (supplied by AC/DC power
adapter)
Reset button
reset
Resets configuration settings to factory
default
30-pin IDC socket
--
Interfaces with EasyST, providing:
• 802.11 Wi-Fi
• LAN switches
• DC power
(Note: IDC socket accepts flat cables)
18120511-01
Interface
Airspan Networks Inc.
2-2
EasyWiFi
Physical Description
Figure 2-1 display the EasyWiFi ports.
Figure 2-1: EasyWiFi ports (side and top panels)
18120511-01
Airspan Networks Inc.
2-3
EasyWiFi
Physical Description
2.3. WiFi Antenna
The EasyWiFi provides an integral WiFi antenna located on its side panel that can
be orientated in the vertical pane, from 0° (i.e. antenna closed) to 180°. Two
positions are used: 90° when EasyWiFi mounted horizontally; and 180° when
EasyWiFi mounted vertically on a wall.
Figure 2-2: EasyWiFi integral WiFi antenna
18120511-01
Airspan Networks Inc.
2-4
EasyWiFi
Physical Description
2.4. Mounting Parts
The EasyWiFi unit provides built-in wall-mounting brackets, desktop-mounting feet,
as well as locking latches for mounting (attaching) the EasyST to the EasyWiFi
extension module.
Figure 2-3: EasyWiFi mounting parts (bottom panel)
18120511-01
Airspan Networks Inc.
2-5
EasyWiFi
Physical Description
2.5. LEDs
The EasyWiFi provides LEDs for indicating the status of various operations. These
LEDs are located on the top panel for easy viewing, as shown in the figure below:
Figure 2-4: EasyWiFi LEDs (top panel)
18120511-01
Airspan Networks Inc.
2-6
EasyWiFi
Physical Description
The EasyWiFi LEDs are described in the table below:
Table 2-3: EasyWiFi LED descriptions
LED
power
wlan
wan
lan1, lan2, lan3,
lan4
18120511-01
Color
Status
Red
On
Unit receiving power
Flashing
Unit is booting up
Off
No power
On
WiFi link with one user or more
Flashing
Active WiFi link (i.e. data transfer)
Off
No WiFi link
On
Link (EasyST and EasyWiFi) is active
Flashing
Activity in 10Mbps - Blinks at 3Hz
Activity in 100Mbps – Blinks at 12 Hz
Off
EasyST is not connected
On
10/100BaseT network device (e.g. PC) is
on
Flashing
Active LAN link (i.e. traffic flow)
Off
No 10/100BaseT interface connected to
port
Green
Green
Green
Description
Airspan Networks Inc.
2-7
EasyWiFi
Physical Description
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
2-8
Attaching EasyST
The EasyWiFi interfaces with the EasyST by means of a 30-pin connector, located
on the EasyWiFi's top panel.
For securing the connection of the EasyST to the EasyWiFi, the EasyWiFi provides
two latches that locks and unlocks the EasyST from the EasyWiFi. The latches are
located on the EasyWiFi's bottom and side panels.
Figure 3-1: EasyST attached to EasyWiFi
18120511-01
Airspan Networks Inc.
EasyWiFi
At t a c h i n g E a s y S T
To attach the EasyST to the EasyWiFi:
1. Align the EasyST with the EasyWiFi by aligning the following:
„
EasyST 30-pin female connector with EasyWiFi's 30-pin male
connector
„
EasyST RJ-45 port with EasyWiFi RJ-45 port labeled lan2
2. Press the EasyST firmly onto the EasyWiFi so that the 30-pin connectors
contact and plug into one another.
Figure 3-2: Aligning EasyST with EasyWiFi
18120511-01
Airspan Networks Inc.
3-2
EasyWiFi
At t a c h i n g E a s y S T
3. Lock the EasyST to the EasyWiFi using the two latches:
a. On the bottom panel, use your thumb to push the latch towards the
locking direction (indicated by the "lock" label).
b. On the bottom-side panel, use a tool with a pointed edge to move the
latch into the EasyST's mounting bracket by inserting the pointed
egde into the latch's hole, and then dragging the latch into the
EasyST's mounting bracket until it is firmly in place.
Figure 3-3: EasyWiFi latches (unlock position)
18120511-01
Airspan Networks Inc.
3-3
EasyWiFi
At t a c h i n g E a s y S T
Figure 3-4: EasyWiFi latches (lock position)
18120511-01
Airspan Networks Inc.
3-4
Connecting to LAN
EasyWiFi provides four 8-pin RJ-45 ports for 10/100BaseT (Fast Ethernet) interface
with the subscriber's network. These LAN ports are located on the back panel and
labeled lan1, lan2, lan3, and lan4. The LAN ports support Half and Full duplexing
mode, Auto-Negotiation, and Auto-MDIX.
The EasyWiFi-to-computer cable setup is listed below:
„ Cable: straight-through CAT 5 STP Ethernet cable
„ Connector: 8-pin RJ-45 at both ends
„ Connector pinouts:
Pin
Function
Tx+
Tx-
Rx+
Rx-
To connect EasyWiFi LAN ports to the subscriber's Ethernet network:
1. Plug the Category 5 Ethernet cable into the desired EasyWiFi 8-pin RJ-45
port.
2. Plug the other end of the Category 5 Ethernet cable into your computer's
LAN port located at the back of your computer.
18120511-01
Airspan Networks Inc.
EasyWiFi
C o n n e c t i n g t o L AN
The figures below illustrate the EasyWiFi-to-computer cable connection:
Figure 4-1: Connecting EasyWiFi to subscriber's LAN
18120511-01
Airspan Networks Inc.
4-2
5
Mounting
Warning: The EasyWiFi is an indoor unit and therefore, must be mounted
indoors.
Warning: To prevent a fire hazard caused by overheating, do not place the
EasyWiFi on a carpeted surface where airflow is restricted.
EasyWiFi is a self-installable indoor unit, requiring no professional installation by a
technician.
EasyWiFi must be mounted indoors in a location that provides the following:
„ High quality RF reception with the Internet service provider (i.e. base
station)
„ Accessibility to subscriber's power supply and LAN network with regards to
cable lengths
„ Strong radio signal strength for the WiFi communication link between
EasyWiFi and the subscriber's WiFi computer
EasyWiFi can be mounted in the following ways, depending on the EasyST's
antenna configuration:
„ EasyST with clip-on antenna: mounted horizontally on a desktop
„ EasyST with window-mount external antenna:
„
Mounted horizontally on a desktop
„
Mounted vertically on a wall
18120511-01
Airspan Networks Inc.
EasyWiFi
Mounting
5.1. Desktop Mounting
The EasyWiFi offers quick-and-easy mounting by allowing you to simply place it
horizontally on a desktop (as shown in the figure below). The EasyWiFi contains
integrated rubber feet (pads) on its bottom panel, providing cushioning as well as
insulation from static electricity.
Figure 5-1: Desktop mounting EasyWiFi
18120511-01
Airspan Networks Inc.
5-2
EasyWiFi
Mounting
5.2. Wall Mounting
When EasyST implements the window-mount, external antenna (i.e. no clip-on
antenna), the EasyWiFi can be mounted either on a desk (i.e. desktop mounting) or a
wall.
The figure below shows a wall-mounted EasyWiFi. The EasyST is connected to an
RF cable that connects to the external antenna (i.e. clip-on antenna is removed). For
mounting to a wall, the EasyWiFi provides two mounting hooks molded into its
bottom panel, as shown below:
Figure 5-2: Wall-mounted EasyWiFi
Note: The EasyWiFi's WiFi antenna must be fully extended (i.e. 180 degrees)
when wall mounted.
18120511-01
Airspan Networks Inc.
5-3
EasyWiFi
Mounting
To wall mount the EasyWiFi:
1. On the wall, mark the position with a pencil where you want to drill the two
holes for the screws onto which the two EasyWiFi mounting hooks will later
by guided. The distance between the two wall-mounting hooks (from their
centers) is approxiamtely 83 mm (3.27 inches). Ensure that the holes are
aligned and level using a spirit level.
2. Drill holes for each hole that you marked in the step above using a no. 6
twist-drill bit.
3. Tap the 6-mm wall anchors (supplied) into each of the drilled holes.
18120511-01
Airspan Networks Inc.
5-4
EasyWiFi
Mounting
4. Drive the two 0.75-inch screws (supplied) into the wall anchors. Ensure that
at least 0.08-inch gap is exposed between the screw head and the wall anchor
to allow insertion into the EasyWiFi mounting hooks.
5. Align the screws with the entrance to the two EasyWiFi mounting hooks, and
then pull down the EasyWiFi to lock the screws into the mounting hooks.
Figure 5-3: Inserting screws into wall mounting hooks
18120511-01
Airspan Networks Inc.
5-5
EasyWiFi
Mounting
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
5-6
Connecting Power
EasyWiFi is powered by an AC/DC power supply adapter, supplying 6 VDC and 4
Amperes. The AC/DC adapter is plugged into a standard electrical wall outlet
(110/240 VAC; 50/60 Hz).
The power adapter also provides interchangeable prongs (e.g. American vs.
European) that can be replaced to suit country electrical standards in which the
EasyWiFi is being installed. To view the AC/DC power adapter specifications, see
Appendix C, "Power Adapter Specifications".
Note: Any AC/DC power adapter complying with Class 2 and LPS, and safety
approved according to national regulations, and that provides rated input of
100-240 V, 50/60 Hz, 0.4 A and output of 6 V, 4 A DC, may be used for
powering the EasyWiFi.
18120511-01
Airspan Networks Inc.
EasyWiFi
Connecting Pow er
6.1. Changing the AC/DC Power Adapter's
Prongs
The AC/DC power adapter provides interchangeable prongs to suit electrical wall
outlet sockets in the country in which the EasyWiFi is being installed.
To change the plug prongs:
1. Remove the prongs by first moving (with the help of a pen) the
LOCK/OPEN switch to OPEN position, and then gently sliding the prongs
upwards, away from the power cord.
2. Align the desired prongs with the adapter's prong groove, and then slide the
prongs onto the adapter in the orientation as shown in the Figure 6-1. Ensure
that the prongs reach the end of the prong groove.
Figure 6-1: Replacing AC/DC power adapter plug prongs
3. Secure the prong in place by moving (with the help of a pen) the
LOCK/OPEN switch to LOCK position.
18120511-01
Airspan Networks Inc.
6-2
EasyWiFi
Connecting Pow er
6.2. Connecting AC/DC Power Adapter
Once you have attached the plug prongs suitable to your country's electrical wall
socket, you are ready to connect the EasyWiFi to the electrical wall outlet.
To connect the EasyWiFi to the power supply:
1. Before plugging the power cord into the electrical wall outlet, plug the
AC/DC power adapter's power cable (i.e. DC power jack) into the
EasyWiFi's DC power socket (labeled power).
2. Plug the prongs of the AC/DC power adapter into the electrical wall outlet.
Figure 6-2: Connecting DC power to EasyWiFi
18120511-01
Airspan Networks Inc.
6-3
EasyWiFi
Connecting Pow er
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
6-4
Resetting EasyWiFi
The EasyWiFi provides a button that enables you to reboot the EasyWiFi as well as
reset the EasyWiFi settings to default. This button is located on the EasyWiFi's back
panel and labeled reset.
To reboot or reset to default the EasyWiFi:
1. Using a tool with a pointed edge, insert the edge into the hole labeled reset
(located on the back panel next to the DC power jack).
Figure 7-1: Resetting EasyWiFi to default using reset button
18120511-01
Airspan Networks Inc.
EasyWiFi
Resetting EasyWiFi
2. Push the the tool into the hole until you feel a button being pushed.
„
To reboot the EasyWiFi: push the button once and then remove the
tool
„
To reset the EasyWiFi to default settings: keep the button pressed
for at least 7 seconds
18120511-01
Airspan Networks Inc.
7-2
A
FCC Interference Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
„ Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
18120511-01
Airspan Networks Inc.
A-1
EasyWiFi
FCC Interference Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
18120511-01
Airspan Networks Inc.
A-2
B
Glossary
BS
Base station
BWA
Broadband wireless access
dB
Decibel
dBm
Power ratio in dB (decibel) of the measured power referenced to one
milliwatt
FTP
File Transfer Protocol
GHz
Gigahertz. One GHz represents 1 billion cycles per second
GW
Gateway
HTTP
HyperText Transfer Protocol
Hz
Hertz
IP
Internet protocol
ISP
Internet Service Provider
LAN
Local-Area Network
MAC
The next layer up from the PHY, known as the media access
controller
Mbps
Megabits per second (one million bits per second)
MHz
Megahertz (one million cycles per second)
MIB
Management information base
ODU
Outdoor unit associated with an ST
QAM
Quadrature amplitude modulation
QoS
Quality of service, which is used to specify level of data throughput
18120511-01
Airspan Networks Inc.
B-1
EasyWiFi
Glossary
RF
Radio frequency
Rx
Receive
SNMP
Simple network management protocol
SNR
Signal-to-noise ratio
ST
Subscriber terminal (interchangeable with CPE)
SW
Software
Tx
Transmit
VoIP
Voice over Internet protocol
WiFi
Wireless Fidelity
WiMAX
WiMAX is a wireless industry coalition whose members are
organized to advance IEEE 802.16 standards for broadband wireless
access (BWA) networks
18120511-01
Airspan Networks Inc.
B-2
C
EasyWiFi Specifications
The EasyWiFi specifications are listed in the table below:
Table B-1: EasyWiFi specifications
Parameter
Radio technology
Networking
Frequency
operation
2412-2472 MHz
Wireless
modulation
• (IEEE802.11g) Orthogonal Frequency
Divisional Multiplexing (OFDM)
• (IEEE802.11b) Direct Sequence Spread
Spectrum (DSSS)
WiFi protocols
• IEEE 802.11b
• IEEE 802.11g Japanese Standard ARIB STDT66
WiFi antenna
Gain: 1 dBi
Clients
• No. of concurrent assigned users: 1,024
• No. of concurrent active users: 32
Tx power max.
19 dBm
Working modes
Bridge (default) and IP router modes
• Four 10/100BaseT Ethernet LAN (support
Half/Full duplexing, Auto-Negotiation, AutoMDIX) with subscribers network Radio with
EasyST (30-pin IDC connector)
• DC power
• Default reset button
Interfaces
Compliancy
18120511-01
Value
WiFi
• WiFi certified: FCC Part 15 ClassA; WiFi;
WPA, WPA2
• 802.11 b/g
Safety
• Underwriters Laboratories (UL) 60950 (USA)
• IEC 60950 (International)
• EN 60950 (ETSI)
Airspan Networks Inc.
C-1
EasyWiFi
EasyWiFi Specifications
Parameter
Management
Environmental
Conditions
Mechanical
18120511-01
Value
Environmental
ETS 300 019 (ETSI)
EMC
EN 301489 (ETSI) FCC Part 15 Sub Class B
Radio
• FCC Part 15 15.247- 2.4 GHz
• EN 300 328 2.4 GHz
• TELEC STD-33/STD-66 (Japan/Telec)
WiFi/WiMAX
SNMP and Web-based (HTTP)
SW Upgrade
Via TFTP server (using Web-based tool)
Operating
Temperature
0 – 50°C ambient
Storage
temperatures
-20 to +75°C ambient
Operating
Humidity
15 - 90% RH
Storage Humidity
5 - 95% RH
Ports
• WiFi antenna
• 4 x 8-pin RJ-45 Ethernet LAN ports (Half/Full
duplexing, Auto-Negotiation, Auto-MDIX)
• DC power socket
• 30-pin IDC connector Button for reset
• LEDs for LAN, WAN, WiFi, Power
Mounting
• 2 x wall-mounting brackets
• 2 locking clips for attaching EasyST
Power
requirements
• Input Voltage / Amperage: 6V/4A
• Input Voltage Accuracy: ± 3% max. Ripple &
Noise: 100mVp-p max
Note: supplied by AC/DC adapter from 110/220
VAC outlet
Dimensions (H x W
x L)
30 x 125 x 125 mm
Weight
210 grams
Airspan Networks Inc.
C-2
D
Power Adapter
Specifications
The specifications of the AC/DC power adapter are listed in the table below:
Table C-1: AC/DC power adapter specifications
Parameter
Input
Output
General
18120511-01
Value
Input voltage
90 to 264 VAC
Input frequency
47 to 63 Hz
Input inrush current
• 30 A at 115 VAC
• 60 A at 230 VAC
Earth leakage
• 0.4 mA max. @ 115 VAC
• 0.8 mA max. @ 230 VAC
Output rating
6V / 4A
Output voltage accuracy
± 2% max.
Max. output power
24W
Line regulation
± 1% max.
Load regulation (full to
half load)
6 ~6.5V
Transient response (full to
half load)
± 1% max. dev.
500 uS recovery
Temperature coeffeicient
± 0.04% / °C
Ripple and noise
100mVp-p max
Protections
• Over voltage protection (output voltage
7.5V)
• Over power protection
• Short circuit protection
• Over current protection: 130% ~ 160%
Efficiency
70% typical at full load
Airspan Networks Inc.
D-1
EasyWiFi
P ow e r Ad a p t e r S p e c i f i c a t i o n s
Parameter
Environmental
18120511-01
Value
Hold-up time
5 ms @ 115 VAC full load
EMI / RFI
VDE and FCC Class B limits
Dielectric withstand
Input/output: 3000 Vac
Input/Ground: 1500 Vac
Safety meet
UL/CUL UL60950 CE EN55022
Switching frequency
100 kHz
Connector for radio
Input: interchangeable prongs
Output: DC power jack
Cable length
1.25 m
Dimensions
86 × 46 × 33 mm
Weight
180 g
MTBF
100,000 hours (MIL-HDBK-217F)
Operating temperature
0 to +40°C
Storage temperature
-20 to +85°C
Humidity
5 to 95% RH non-condensing
Vibration
2.4G, 5 to 500 Hz
Cooling
Free air convection
Airspan Networks Inc.
D-2
EasyWiFi
P ow e r Ad a p t e r S p e c i f i c a t i o n s
This page is intentionally left blank.
18120511-01
Airspan Networks Inc.
D-3
How to find out
more
about
Airspan products
and solutions
For more information about
Airspan, its products and
solutions, please visit our
Web site:
www.airspan.com
Or write to us at one of the
addresses below.
We will be delighted to send
you additional
information on any of our
products and their
applications around the
world.
Airspan has offices in the
following countries:
Europe
Czech Republic
Poland
Russia
United Kingdom
Africa
South Africa
Americas
United States
Asia Pacific
Australia
China
Indonesia
Japan
New Zealand
Philippines
Sri Lanka
Worldwide Headquarters:
Airspan Networks Inc.
777 Yamato Road, Suite 105
Boca Raton, Florida 33431-4408
USA
Main Operations:
Airspan Communications Ltd.
Cambridge House, Oxford Road,
Uxbridge, Middlesex UB8 1UN
UK
Tel: +1 561 893 8670
Fax: +1 561 893 8671
Tel: +44 (0) 1895 467 100
Fax: +44 (0) 1895 467 101

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:03:31 17:20:11+08:00
Create Date                     : 2006:03:20 16:43:53+02:00
Keywords                        : 18120511-01
Company                         : Airspan Networks
Page Count                      : 47
About                           : uuid:8eb16c87-848b-4a00-b9e5-01df78b07455
Producer                        : Acrobat Distiller 6.0 (Windows)
Mod Date                        : 2006:03:31 17:20:11+08:00
Creation Date                   : 2006:03:20 16:43:53+02:00
Author                          : Mike
Creator Tool                    : (Acrobat PDFMaker 6.0 for Word)
Metadata Date                   : 2006:03:31 17:20:11+08:00
Document ID                     : uuid:dabbd3d2-aaa2-4b48-b321-d229d037a8c9
Format                          : application/pdf
Title                           : EasyWiFi
Creator                         : Mike

EXIF Metadata provided by EXIF.tools