Delta Electronics WAP125 Dual Band Desktop Access Point with PoE User Manual

Delta Networks, Inc. Dual Band Desktop Access Point with PoE wap125 qsg en US

a href="https://usermanual.wiki/Delta-Electronics" itemprop="url"> Delta Electronics >

Users Manual

  Quick Start Guide  Cisco WAP125 Wireless-AC/N  Dual Band  Desktop Access Point with PoE Welcome Thank you for choosing the Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE. The Cisco WAP125 is an indoor concurrent dual-band radio 802.11ac and 802.11n access point with Power over Ethernet (PoE). -PoE Supplied by UL Listed I.T.E.  NOTE The unit should be connected to PoE networks only, without routing to the outside plant. This guide provides the general layout of the Cisco WAP125, describe how to deploy the Cisco WAP125 in your network, and describe how to configure the Cisco WAP125. For additional information, see www.cisco.com/go/100_wap_resources.
2 Cisco WAP125 Quick Start Guide Package Contents • Wireless Access Point • Power Adapter • This Quick Start Guide • Ethernet Cable • Technical Support Contact • Pointer Card China RoHS • EU Directives 1999/5/EC Compliance Information (for EU SKU only) 1 Before You Begin Before you begin the installation, make sure that you have the following equipment and services:  • A computer with one of the following browser support: – Internet Explorer 9.0 or later – A recent version of either Chrome, Firefox or Safari • Tools for installing the hardware • FindIT tool for locating the access point • One or more Ethernet network switches with PoE • Mobile devices (iPhone, Android, etc.) via wireless setup SSID. (Configure via Wi-Fi mobile device with a web browser.) 2 Cisco WAP125 Features Front Panel The front panel of the Cisco WAP125 consists of one system LED. For full descriptions of the colors of the lights and their indications, see Verifying the Hardware Installation. Back Panel RESET—See Rebooting the Cisco WAP125 or Resetting to Factory Defaults for information on the RESET button. LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP125 using PoE. It  is  an  auto-sensing,  Gigabit  Ethernet  (802.3)  port  used  to  connect  the  Cisco
Download:
Mirror Download [FCC.gov]
Document ID3248136
Application IDjA4WMo2jaf8nm42eOiyPnw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize36.29kB (453671 bits)
Date Submitted2017-01-05 00:00:00
Date Available2017-07-05 00:00:00
Creation Date2016-12-06 17:12:21
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2016-12-30 11:55:15
Document Titlewap125_qsg_en-US.fm
Document CreatorMicrosoft® Word 2013
Document Author: karaghup
FCC ID Filing: PD5-WAP125

Navigation menu