Delta Electronics WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch User Manual WAP131 351 ClassB RCSI
Delta Networks, Inc. Wireless-N Dual Radio Access Point with 5 Ports Switch WAP131 351 ClassB RCSI
Contents
- 1. User Manual (Statement).PDF
- 2. User Manual.pdf
User Manual (Statement).PDF
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
REVIEW DRAFT—CISCO CONFIDENTIAL
Regulatory Compliance and Safety Information
for the Cisco WAP131 Wireless-N Dual Radio
Access Point with PoE and Cisco WAP351
Wireless-N Dual Radio Access Point with 5 Ports
Switch (EMC Class B Devices)
This document provides domestic and international regulatory compliance and safety information for the
Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual
Radio Access Point with 5 Ports Switch (EMC Class B Devices).
Use this document in conjunction with the documentation available online for the Wireless Access
Points.
This document includes the following sections:
•Translated Safety Warnings
•European Directives
•Statement 2002—Declaration of Conformity with Regard to the Directives 2006/95/EC and
2004/108/EC
•China RoHS Table w/Note
•EMC Class B Notices and Warnings
•Japanese Electric Appliance and Radio Laws
•Japanese Safety Instructions
•All Part 15 Radio Devices
•Administrative Rules for Cisco Wireless Devices in Taiwan
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
REVIEW DRAFT—CISCO CONFIDENTIAL
2
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Translated Safety Warnings
This section includes translations in multiple languages of the warnings that may appear in your product
documents.
•Statement 1071—Warning Definition
•Statement 237—Power Off Warning
•Statement 378—Read Wall-Mounting Instructions Before Installation
•Statement 1004—Installation Instructions
•Statement 1005—Circuit Breaker
•Statement 1040—Product Disposal
•Statement 1072—Shock Hazard from Interconnections
•Statement 1072—Shock Hazard from Interconnections
•Statement 1073—No User-Serviceable Parts
•Statement 1074—Comply with Local and National Electrical Codes
Statement 1071—Warning Definition
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device.
SAVE THESE INSTRUCTIONS
Waarschuwing
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de
waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt
raadplegen.
BEWAAR DEZE INSTRUCTIES
REVIEW DRAFT—CISCO CONFIDENTIAL
3
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Varoitus
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin
käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu
onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen
mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien
lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
Attention
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant
entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez
conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des
avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,
référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
Warnung
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen
kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und
den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder
Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten
Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
Avvertenza
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti.
Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le
traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
Advarsel
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du
begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med
elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten
av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne
enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
REVIEW DRAFT—CISCO CONFIDENTIAL
4
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de
lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos
perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de
prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para
localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
¡Advertencia!
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el
número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña
a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
Varning!
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av
varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna
anordning.
SPARA DESSA ANVISNINGAR
REVIEW DRAFT—CISCO CONFIDENTIAL
5
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões
corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os
circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o
número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de
segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
Advarsel
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for
legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de
involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til
undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de
oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER
REVIEW DRAFT—CISCO CONFIDENTIAL
6
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
REVIEW DRAFT—CISCO CONFIDENTIAL
7
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 237—Power Off Warning
Warning
Power off the unit before you begin.
Waarschuwing
Schakel de eenheid uit voordat u begint.
REVIEW DRAFT—CISCO CONFIDENTIAL
8
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 378—Read Wall-Mounting Instructions Before Installation
Varoitus
Ennen kuin aloitat, katkaise laitteesta virta.
Attention
Veillez à mettre l'unité hors tension avant de commencer.
Warnung
Schalten Sie die Einheit aus, bevor Sie beginnen.
Avvertenza
Spegnere l'unità prima di iniziare.
Advarsel
Slå enheten av før du begynner.
Aviso
Desligue o dispositivo antes de começar.
¡Advertencia!
Apagar la unidad antes de comenzar.
Varning!
Stäng av strömmen till enheten innan du börjar.
Warning
Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system.
Waarschuwing
Lees de wandbevestigingsinstructies aandachtig door voordat u met de installatie begint. Het niet
gebruiken van de juiste hardware of het opvolgen van de juiste procedures kan resulteren in een
gevaarlijke situatie voor mensen en schade aan het systeem.
Varoitus
Lue seinäkiinnitysohjeet huolellisesti läpi ennen työn aloitusta. Mikäli kiinnityksessä ei käytetä
oikeanlaisia työkaluja tai ohjeita ei noudateta tarkasti, järjestelmä saattaa aiheuttaa vaaratilanteen
tai se voi vaurioitua.
Attention
Lisez les instructions de montage murale avec attention avant de commencer l'installation. Ne pas
utiliser le matériel correct ou ne pas suivre les procédures correctes pourrait donner résultat a une
situation dangereuse pour les utilisateurs et endommager le système.
Warnung
Bitte lesen Sie vor Beginn der Installierung die Anleitungen zur Wandmontage sorgfältig durch.
Verwendung von inkorrekter Apparatur oder Nichtbefolgung der vorgeschriebenen Methoden kann
zur Gefährdung von Personen oder Schaden am System führen.
Avvertenza
Leggere attentamente le istruzioni per il montaggio al muro prima di iniziare l'installazione. Un
errato uso del corretto hardware o il mancato rispetto delle corrette procedure potrebbe avere come
conseguenza una situazione di pericolo per le persone e danni al sistema.
Advarsel
Les nøye gjennom instruksene om veggmontering før du begynner monteringen. Dersom man ikke
bruker riktig maskinvare eller ikke følger riktig framgangsmåte kan det resultere i risiko for
personskader og skade på systemet.
REVIEW DRAFT—CISCO CONFIDENTIAL
9
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1004—Installation Instructions
Aviso
Leia com cuidado as instruções de montagem na parede antes de iniciar a instalação. Falha em usar
o hardware correto ou em seguir os procedimentos corretos pode resultar numa situação de risco
para as pessoas e danos ao sistema.
¡Advertencia!
Lea atentamente las instrucciones que se encuentran en la pared antes de comenzar con la
instalación. Si no utiliza el hardware correcto o no sigue los procedimientos correctos se podría
producir una situación peligrosa para las personas y daños al sistema.
Varning!
Läs väggmonteringsintruktionerna noga innan du påbörjar installationen. Försummelse av att inte
använda rätt hårdvara eller att inte föjla korrekt tillvägagångsätt kan resultera i en riskabel
situation för människor och kan skada systemet.
Warning
Read the installation instructions before connecting the system to the power source.
Waarschuwing
Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.
Varoitus
Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention
Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation.
Warnung
Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.
Avvertenza
Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.
Advarsel
Les installasjonsinstruksjonene før systemet kobles til strømkilden.
REVIEW DRAFT—CISCO CONFIDENTIAL
10
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Aviso
Leia as instruções de instalação antes de ligar o sistema à fonte de energia.
¡Advertencia!
Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.
Varning!
Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten.
REVIEW DRAFT—CISCO CONFIDENTIAL
11
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1005—Circuit Breaker
Warning
This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure
that the protective device is rated not greater than:
10A, 240 Vac.
Waarschuwing
Dit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting
(overstroom). Controleer of de beschermingsinrichting niet meer dan:
10A, 240 Vac is.
Varoitus
Tämä tuote on riippuvainen rakennukseen asennetusta oikosulkusuojauksesta
(ylivirtasuojauksesta). Varmista, että suojalaitteen mitoitus ei ole yli:
10A, 240 Vac.
Attention
Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend de
l'installation électrique du local. Vérifiez que le courant nominal du dispositif de protection n'est
pas supérieur à :
10A, 240 Vac.
Warnung
Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz
installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als:
10A, 240 Vac beträgt.
Avvertenza
Questo prodotto dipende dall'impianto dell'edificio per quanto riguarda la protezione contro
cortocircuiti (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating
superiore a:
10A, 240 Vac.
Advarsel
Dette produktet er avhengig av bygningens installasjoner av kortslutnings (overstrøm)-beskyttelse.
Påse at verneenheten ikke er merket høyere enn:
10A, 240 Vac.
Aviso
Este produto depende das instalações existentes para proteção contra curto-circuito (sobrecarga).
Assegure-se de que o fusível ou disjuntor não seja superior a:
10A, 240 Vac.
¡Advertencia!
Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del edificio. Asegúrese
de que el dispositivo de protección no sea superior a:
10A, 240 Vac.
Varning!
Denna produkt är beroende av i byggnaden installerat kortslutningsskydd (överströmsskydd).
Kontrollera att skyddsanordningen inte har högre märkvärde än:
10A, 240 Vac.
10A, 240 Vac.
REVIEW DRAFT—CISCO CONFIDENTIAL
12
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1040—Product Disposal
10A, 240 Vac.
10A, 240 Vac.
10A, 240 Vac.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Waarschuwing
Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle
nationale wetten en reglementen.
Varoitus
Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti.
Attention
La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives
de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent.
Warnung
Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes
erfolgen.
Avvertenza
Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.
Advarsel
Endelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og
bestemmelser.
Aviso
Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais.
¡Advertencia!
Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
Varning!
Vid deponering hanteras produkten enligt gällande lagar och bestämmelser.
REVIEW DRAFT—CISCO CONFIDENTIAL
13
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Aviso
O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações
nacionais.
Advarsel
Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler.
REVIEW DRAFT—CISCO CONFIDENTIAL
14
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1072—Shock Hazard from Interconnections
Warning
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only
through the use of a special tool, lock and key or other means of security.
Waarschuwing
Voltages kunnen elektrische schokken veroorzaken in PoE (Power over Ethernet)-circuits als er
verbindingen worden gemaakt met blootliggende metalen contactpunten, geleiders of
aansluitingspunten die niet zijn geïsoleerd. Gebruik dit type verbinding niet tenzij de blootliggende
metalen onderdelen zich bevinden op een locatie met beperkte toegang en de gebruikers en
onderhoudstechnici die toegang tot deze locatie hebben, op het gevaar worden gewezen. De locatie
met beperkte toegang kan alleen worden geopend met speciaal gereedschap, slot en sleutel of een
andere beveiligingsmethode.
Varoitus
Sisäisissä Ethernet (PoE) -virtapiireissä voi olla sähköiskun vaaran aiheuttavia jännitteitä, jos
kytkentöihin käytetään eristämättömiä paljaita metalliliittimiä tai -johtimia. Vältä tällaisia
kytkentöjä, elleivät paljaat metalliosat ole rajatussa paikassa. Ilmoita valtuutetuille käyttäjille ja
huoltohenkilöille vaarasta. Rajattuun alueeseen pääsee käsiksi ainoastaan erityistyökalua, lukkoa
ja avainta tai muuta turvallista menetelmää käyttämällä.
Attention
Les tensions existant sur les alimentations utilisant la technologie PoE (Power over Ethernet)
peuvent constituer un risque d'électrocution si les interconnexions sont effectuées en utilisant des
terminaux, conducteurs ou contacts métalliques exposés non isolés. Évitez d'utiliser de telles
méthodes d'interconnexion à moins que les pièces métalliques exposées ne se trouvent dans un
emplacement d'accès restreint et que les utilisateurs et les responsables du service autorisés dans
cet emplacement d'accès restreint ne soient conscients du danger. Une zone d'accès restreint peut
être accédée uniquement à l'aide d'une clé, d'un outil et d'un verrou spécial, ou d'autres moyens de
sécurité.
Warnung
Bei Power-over-Ethernet-(PoE-)Schaltkreisen besteht u.U. Stromschlaggefahr, wenn Verbindungen
unter Verwendung nicht isolierter, freiliegender Metallkontakte, Leiter oder Anschlussklemmen
hergestellt werden. Vermeiden Sie das Herstellen solcher Verbindungen, es sei denn, die
freiliegenden Metallteile befinden sich an Orten mit beschränktem Zugang, und Personen, die
Zugang dazu haben, sind ausdrücklich über diese Gefahr informiert worden. Ein Ort mit
beschränktem Zugang ist nur mit Hilfe eines speziellen Werkzeugs, Schloss und Schlüssels oder
anderen Sicherheitseinrichtungen zugänglich.
Avvertenza
Nei circuiti con alimentazione via Ethernet (PoE) possono verificarsi pericoli di scosse elettriche se
si creano connessioni con contatti metallici, conduttori o terminali scoperti. Evitare di utilizzare i
metodi di connessione sopraelencati a meno che le parti metalliche esposte non si trovino in una
zona riservata e gli utenti e il personale di assistenza, che sono autorizzati ad accedere nella
suddetta zona, siano stati messi al corrente del pericolo. È possibile accedere alla zona riservata
solamente utilizzando gli appositi elementi di sicurezza.
REVIEW DRAFT—CISCO CONFIDENTIAL
15
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Advarsel
I strømkretser med PoE (Power over Ethernet) kan det være spenninger som kan utgjøre støtfare hvis
det blir foretatt sammenkoblinger med uisolerte, eksponerte kontakter, ledere eller terminaler av
metall. Unngå å bruke slike sammenkoblingsmetoder med mindre de eksponerte metalldelene er i
et område med begrenset tilgang, og brukere og servicepersonell som har tilgang til det begrensede
området, blir gjort oppmerksom på faren. Et område med begrenset tilgang kan bare åpnes ved hjelp
av spesialverktøy, nøkkel eller andre sikkerhetstiltak.
Aviso
Pode haver voltagens que representam perigo de choque em circuitos PoE (Power over Ethernet) se
as interconexões forem feitas utilizando-se terminais, condutores ou contatos de metal exposto e
sem isolamento. Evite utilizar tais métodos de interconexão a não ser que as partes de metal
expostas estejam em um local de acesso restrito e os usuários e o pessoal de serviço com acesso
autorizado a este local restrito estejam cientes do perigo. Uma área de acesso restrito só pode ser
acessada com o uso de uma ferramenta, fechadura e chave especial ou de outros meios de
segurança.
¡Advertencia!
Puede haber voltajes con riesgo de shock en circuitos de alimentación sobre el cableado Ethernet
(PoE), si para las interconexiones se utilizan contactos, conductores o terminales metálicos
descubiertos. Evite tales métodos de interconexión, a menos que las partes metálicas descubiertas
se encuentren en un lugar de acceso restringido y tanto los usuarios como el personal de servicios
en dicho lugar sean conscientes de la existencia de tal riesgo. Sólo se puede tener acceso a una
zona de acceso restringido mediante el uso de una herramienta especial, un candado y una llave u
otros medios de seguridad.
Varning!
Det kan finnas spänningar på PoE-kretsarna (Power over Ethernet) som utgör risk för stötar om
sammankopplingarna görs med ej isolerade, exponerade kontakter, ledare och/eller terminaler av
metall. Undvik att använda sådana sammankopplingsmetoder, såvida inte de exponerade
metalldelarna finns i en plats med begränsad åtkomst. Användare och servicepersonal som tillåts
inom platsen med begränsad åtkomst måste vara medvetna om risken. Ett begränsat område kan
bara nås med ett speciellt verktyg eller lås, en speciell nyckel eller någon annan säkerhetsmetod.
REVIEW DRAFT—CISCO CONFIDENTIAL
16
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1073—No User-Serviceable Parts
Warning
No user-serviceable parts inside. Do not open.
Waarschuwing
Er zijn geen door de gebruiker te vervangen onderdelen. Niet openen.
Varoitus
Ei sisällä käyttäjän huollettavissa olevia osia. Älä avaa.
Attention
Aucune pièce se trouvant à l'intérieur ne peut être réparée ou remplacée par l'utilisateur. Ne pas
ouvrir.
Warnung
Enthält keine Teile, die vom Benutzer gewartet werden müssen. Bitte nicht öffnen.
Avvertenza
Non contiene parti riparabili dall'utente. Non aprire.
Advarsel
Inneholder ingen deler som kan repareres av brukeren. Må ikke åpnes.
Aviso
Sem peças sujeitas a manutenção pelo utilizador. Não abrir.
¡Advertencia!
No contiene partes que puedan ser arregladas por el usuario. No abrir.
Varning!
Det finns inga delar som användare kan utföra service på. Öppna inte.
REVIEW DRAFT—CISCO CONFIDENTIAL
17
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Statement 1074—Comply with Local and National Electrical Codes
Aviso
Manutenção somente por técnico especializado. Não abra.
Advarsel
Ingen dele indeni som brugere kan reparere. Åbn ej.
Warning
Installation of the equipment must comply with local and national electrical codes.
Waarschuwing
Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale
elektriciteitsvoorschriften.
Varoitus
Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti.
Attention
L'équipement doit être installé conformément aux normes électriques nationales et locales.
REVIEW DRAFT—CISCO CONFIDENTIAL
18
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Translated Safety Warnings
Warnung
Die Installation der Geräte muss den Sicherheitsstandards entsprechen.
Avvertenza
L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali.
Advarsel
Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter.
Aviso
A instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e
nacionais.
¡Advertencia!
La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales.
Varning!
Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter.
REVIEW DRAFT—CISCO CONFIDENTIAL
19
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
European Directives
European Directives
The following CE mark is affixed to the equipment and packaging:
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the
European Community, Switzerland, Norway, Iceland and Liechtenstein
[Bulgarian]:
[Czech]:
Dansk
[Danish]:
Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i
Direktiv 1999/5/EF.
Deutsch
[German]:
Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden
Vorgaben der Richtlinie 1999/5/EU.
Eesti
[Estonian]:
See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.
English:
This equipment is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]:
Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva
1999/5/CE.
[Greek]:
Français
[French]:
Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la
Directive 1999/5/EC.
REVIEW DRAFT—CISCO CONFIDENTIAL
20
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
European Directives
Hrvatski:
[Croatian]
Ova oprema je u sukladnosti s bitnim zahtjevima i drugim relevantnim odredbama Direktive
1999/5/EC.
Íslenska
[Icelandic]:
Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.
Italiano
[Italian]:
Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva
1999/5/CE.
Latviski
[Latvian]:
[Lithuanian]:
Nederlands
[Dutch]:
Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de
Richtlijn 1999/5/EC.
Malti
[Maltese]:
Magyar
[Hungarian]:
Norsk
[Norwegian]:
Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i
EU-direktiv 1999/5/EF.
Polski
[Polish]:
Português
[Portuguese]:
Este equipamento está em conformidade com os requisitos essenciais e outras provisões
relevantes da Directiva 1999/5/EC.
[Romanian]:
Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale
Directivei 1999/5/EC.
Slovensko
[Slovenian]:
Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.
Slovensky
[Slovak]:
Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív:
1999/5/EC.
Suomi
[Finnish]:
Svenska
[Swedish]
Türk
[Turkish]:
Bu cihaz 1999/5/EC Direktifi'nin temel gereklerine ve ilgili di?er hükümlerine uygundur.
REVIEW DRAFT—CISCO CONFIDENTIAL
21
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
European Directives
Statement 2002—Declaration of Conformity with Regard to the Directives
2006/95/EC and 2004/108/EC
This equipment complies with the essential requirements and other provisions of Directives 2006/95/EC
and 2004/108/EC. For more information, please refer to the Declarations of Conformity.
Standard Compliance
The Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual
Radio Access Point with 5 Ports Switch are in compliance with national and international standards as
below:
•EN 60950-1: 2006
•EN 60950-1/A1: 2010
•EN 60950-1/A2:2013
•EN 60950-1/A11: 2009
•EN 60950-1/A12: 2011
•EN55022, 2010+AC2011
•EN55024, 2010
•EN62311, 2008
•IEC60950-1, 2nd+AM1+AM2
•UL60950-1, 2nd
•CISPR22, 2010
•CISPR24, 2010
•47 CFR FCC PART15 B
•ICES-003, 2012 issue 5
•47 CFR FCC PART15 C
•47 CFR FCC PART15 E
•RSS-GEN, RSS-100, RS-210
Safety of Information Technology Equipment
•EN50385: (2002-08)
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations
for wireless telecommunication systems with the basic restrictions or the reference levels related to
human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public
•EN 300 328 V1.8.1:2012
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band
modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive
•EN 301 893 V1.7.1:2012
Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive
REVIEW DRAFT—CISCO CONFIDENTIAL
22
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
European Directives
•EN 301 489-1 V1.9.2:2011
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
•EN 301 489-17 V2.2.1:2012
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission
Systems
For specific details about the years, revisions and relevant amendments please refer to the applicable
declaration of conformity available at http://www.ciscofax.com.
Canadian Compliance Statements
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit
pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un fonctionnement indésirable.
Caution (i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile satellite systems;
(ii) High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz
and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement (i) Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et
5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
FCC Declaration of Conformity Information (for USA only)
Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual
Radio Access Point with 5 Ports Switch
REVIEW DRAFT—CISCO CONFIDENTIAL
23
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
European Directives
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Note Equipment must be installed and operated using the relevant manuals and only installed with the correct
cables and connectors. Cisco Systems Inc. is not responsible for any radio or television interference
caused by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible party:
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134
USA
+408 526-7208
REVIEW DRAFT—CISCO CONFIDENTIAL
24
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
China RoHS Table w/Note
China RoHS Table w/Note
Note This Table is a regulatory document required for products shipped to the People’s Republic of China.
EMC Class B Notices and Warnings
This section includes the EMC Class B warnings for the Cisco WAP131 Wireless-N Dual Radio Access
Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch.
Statement 2018—Class B Notice for FCC
Modifying the equipment without Cisco’s authorization may result in the equipment no longer
complying with FCC requirements for Class B digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to
radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
REVIEW DRAFT—CISCO CONFIDENTIAL
25
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
EMC Class B Notices and Warnings
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Statement 2022—Class B Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Statement 295—Class B Warning for Korea
Warning
This is a Class B Device and is registered for EMC requirements for residential use. This device can
be used not only in residential areas but in all other areas.
Warning
The service related to human safety is not allowed because this device may have the possibility of
the radio interference.
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음
REVIEW DRAFT—CISCO CONFIDENTIAL
26
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Japanese Electric Appliance and Radio Laws
Statement 157—VCCI Compliance for Class B Equipment
Japanese Electric Appliance and Radio Laws
Statement 371—Power Cable and AC Adapter
Statement 391—Low-Power Radio Data Communications Systems (ARIB-STD)
Warning
This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or
television receiver in a domestic environment, it may cause radio Interference. Install and use the
equipment according to the instruction manual.
VCCI-B
REVIEW DRAFT—CISCO CONFIDENTIAL
27
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Japanese Safety Instructions
Japanese Safety Instructions
You are strongly advised to read the safety instruction before using the product.
http://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html
When installing the product, please use the provided or designated connection cables/power cables/AC
adapters.
Product Usage Restrictions
The Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual
Radio Access Point with 5 Ports Switch are designed for indoor usage only. Outdoor usage is not
recommended, unless otherwise noted.
Radio
This section describes radio compliance conditions for the Cisco WAP131 Wireless-N Dual Radio
Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch.
The Part 15 radio device operates on a non-interference basis with other devices operating in this
frequency band as well as other services operating throughout the radio spectrum. Any changes or
modifications to the said product without approval from Cisco could void the user’s authority to operate
the device. This includes the use on non-approved antennas or 3rd party amplifiers with the radio
module.
Administrative Rules for Cisco Wireless Devices in Taiwan
This section provides administrative rules for operating Cisco wireless access products in Taiwan. The
rules are provided in both Chinese and English.
REVIEW DRAFT—CISCO CONFIDENTIAL
28
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Radio
Wireless Devices with IEEE 802.11a/b/g Radios
Chinese Translation
English Translation
This equipment is limited for indoor use.
All Access Wireless Products
Chinese Translation
REVIEW DRAFT—CISCO CONFIDENTIAL
29
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Generic Discussion on RF Exposure
English Translation
Administrative Rules for Low-Power Radio-Frequency Devices
Article 12
For those low-power radio-frequency devices that have already received a type-approval, companies,
business units, or users should not change its frequencies, increase its power, or change its original
features and functions.
Article 14
The operation of the low-power radio-frequency devices is subject to the conditions that no harmful
interference is caused to aviation safety and authorized radio stations; and if interference is caused, the
user must stop operating the device immediately and can’t re-operate it until the harmful interference is
clear.
The authorized radio station means a radio-communication service operating in accordance with the
Communication Act.
The operation of the low-power radio-frequency devices is subject to the interference caused by the
operation of an authorized radio station, by another intentional or unintentional radiator, by industrial,
scientific and medical (ISM) equipment, or by an incidental radiator.
Generic Discussion on RF Exposure
FCC Radiation Exposure Statement
IMPORTANT NOTE:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and
are firmware programmed at the factory to match the intended destination. The firmware setting is not
accessible by the end user.
Radiation Exposure Statement
This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits
specified by Health Canada Safety Code 6. The system must be installed at a minimum separation
distance from the antenna to a general bystander of 7.9 inches (20 cm) to maintain compliance with the
General Populace limits.
L'exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée
conforme aux limites établies par le Code de sécurité 6 de Santé Canada. Le système doit être installé à
une distance minimale de 7,9 pouces (20 cm) séparant l'antenne d'une personne présente en conformité
avec les limites permises d'exposition du grand public.
REVIEW DRAFT—CISCO CONFIDENTIAL
30
RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)
78-100307-01
Declarations of Conformity
Declarations of Conformity
The Declaration of Conformity statements for this product can be found at the following URL:
http://www.ciscofax.com
Note If you still have questions regarding the compliance of these products or you cannot find the information
you are looking for, please send an e-mail request to complianceinfo@cisco.com.
Related Documentation
Refer to the following documents for additional information about the Cisco WAP131 Wireless-N Dual
Radio Access Point with PoE and the Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports
Switch:
•www.cisco.com/go/100_wap_resources
•www.cisco.com/go/300_wap_resources
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a
service request, and gathering additional information, see What’s New in Cisco Product Documentation
at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical
documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The
RSS feeds are a free service.
This document is to be used in conjunction with the documents listed in the “Related Documentation” section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The
use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2014 Cisco Systems, Inc. All rights reserved.