Delta Networks WAP131 Wireless-N Dual Radio Access Point with PoE User Manual WAP131 351 ClassB RCSI

Delta Networks, Inc. Wireless-N Dual Radio Access Point with PoE WAP131 351 ClassB RCSI

Contents

User Manual (Statement).PDF

Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USAREVIEW DRAFT—CISCO CONFIDENTIALRegulatory Compliance and Safety Information for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (EMC Class B Devices)This document provides domestic and international regulatory compliance and safety information for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (EMC Class B Devices).Use this document in conjunction with the documentation available online for the Wireless Access Points.This document includes the following sections:•Translated Safety Warnings•European Directives•Statement 2002—Declaration of Conformity with Regard to the Directives 2006/95/EC and 2004/108/EC•China RoHS Table w/Note•EMC Class B Notices and Warnings•Japanese Electric Appliance and Radio Laws•Japanese Safety Instructions•All Part 15 Radio Devices•Administrative Rules for Cisco Wireless Devices in Taiwan•Related Documentation•Obtaining Documentation and Submitting a Service Request
REVIEW DRAFT—CISCO CONFIDENTIAL2RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsTranslated Safety WarningsThis section includes translations in multiple languages of the warnings that may appear in your product documents. •Statement 1071—Warning Definition•Statement 237—Power Off Warning•Statement 378—Read Wall-Mounting Instructions Before Installation•Statement 1004—Installation Instructions•Statement 1005—Circuit Breaker•Statement 1040—Product Disposal•Statement 1072—Shock Hazard from Interconnections•Statement 1072—Shock Hazard from Interconnections•Statement 1073—No User-Serviceable Parts•Statement 1074—Comply with Local and National Electrical CodesStatement 1071—Warning DefinitionWarningIMPORTANT SAFETY INSTRUCTIONSThis warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.SAVE THESE INSTRUCTIONSWaarschuwingBELANGRIJKE VEILIGHEIDSINSTRUCTIESDit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.BEWAAR DEZE INSTRUCTIES
REVIEW DRAFT—CISCO CONFIDENTIAL3RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsVaroitusTÄRKEITÄ TURVALLISUUSOHJEITATämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.SÄILYTÄ NÄMÄ OHJEETAttentionIMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.CONSERVEZ CES INFORMATIONSWarnungWICHTIGE SICHERHEITSHINWEISEDieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.BEWAHREN SIE DIESE HINWEISE GUT AUF.AvvertenzaIMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONIAdvarselVIKTIGE SIKKERHETSINSTRUKSJONERDette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.TA VARE PÅ DISSE INSTRUKSJONENE
REVIEW DRAFT—CISCO CONFIDENTIAL4RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsAvisoINSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.GUARDE ESTAS INSTRUÇÕES ¡Advertencia!INSTRUCCIONES IMPORTANTES DE SEGURIDADEste símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONESVarning!VIKTIGA SÄKERHETSANVISNINGARDenna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.SPARA DESSA ANVISNINGAR
REVIEW DRAFT—CISCO CONFIDENTIAL5RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsAvisoINSTRUÇÕES IMPORTANTES DE SEGURANÇAEste símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.GUARDE ESTAS INSTRUÇÕESAdvarselVIGTIGE SIKKERHEDSANVISNINGERDette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.GEM DISSE ANVISNINGER
REVIEW DRAFT—CISCO CONFIDENTIAL6RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety Warnings
REVIEW DRAFT—CISCO CONFIDENTIAL7RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 237—Power Off WarningWarningPower off the unit before you begin. WaarschuwingSchakel de eenheid uit voordat u begint.
REVIEW DRAFT—CISCO CONFIDENTIAL8RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 378—Read Wall-Mounting Instructions Before InstallationVaroitusEnnen kuin aloitat, katkaise laitteesta virta.AttentionVeillez à mettre l'unité hors tension avant de commencer.WarnungSchalten Sie die Einheit aus, bevor Sie beginnen.AvvertenzaSpegnere l'unità prima di iniziare.AdvarselSlå enheten av før du begynner. AvisoDesligue o dispositivo antes de começar.¡Advertencia!Apagar la unidad antes de comenzar.Varning!Stäng av strömmen till enheten innan du börjar.WarningRead the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.WaarschuwingLees de wandbevestigingsinstructies aandachtig door voordat u met de installatie begint. Het niet gebruiken van de juiste hardware of het opvolgen van de juiste procedures kan resulteren in een gevaarlijke situatie voor mensen en schade aan het systeem.VaroitusLue seinäkiinnitysohjeet huolellisesti läpi ennen työn aloitusta. Mikäli kiinnityksessä ei käytetä oikeanlaisia työkaluja tai ohjeita ei noudateta tarkasti, järjestelmä saattaa aiheuttaa vaaratilanteen tai se voi vaurioitua.AttentionLisez les instructions de montage murale avec attention avant de commencer l'installation. Ne pas utiliser le matériel correct ou ne pas suivre les procédures correctes pourrait donner résultat a une situation dangereuse pour les utilisateurs et endommager le système.WarnungBitte lesen Sie vor Beginn der Installierung die Anleitungen zur Wandmontage sorgfältig durch. Verwendung von inkorrekter Apparatur oder Nichtbefolgung der vorgeschriebenen Methoden kann zur Gefährdung von Personen oder Schaden am System führen.AvvertenzaLeggere attentamente le istruzioni per il montaggio al muro prima di iniziare l'installazione. Un errato uso del corretto hardware o il mancato rispetto delle corrette procedure potrebbe avere come conseguenza una situazione di pericolo per le persone e danni al sistema.AdvarselLes nøye gjennom instruksene om veggmontering før du begynner monteringen. Dersom man ikke bruker riktig maskinvare eller ikke følger riktig framgangsmåte kan det resultere i risiko for personskader og skade på systemet.
REVIEW DRAFT—CISCO CONFIDENTIAL9RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1004—Installation InstructionsAvisoLeia com cuidado as instruções de montagem na parede antes de iniciar a instalação. Falha em usar o hardware correto ou em seguir os procedimentos corretos pode resultar numa situação de risco para as pessoas e danos ao sistema.¡Advertencia!Lea atentamente las instrucciones que se encuentran en la pared antes de comenzar con la instalación. Si no utiliza el hardware correcto o no sigue los procedimientos correctos se podría producir una situación peligrosa para las personas y daños al sistema.Varning!Läs väggmonteringsintruktionerna noga innan du påbörjar installationen. Försummelse av att inte använda rätt hårdvara eller att inte föjla korrekt tillvägagångsätt kan resultera i en riskabel situation för människor och kan skada systemet.WarningRead the installation instructions before connecting the system to the power source. WaarschuwingRaadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.VaroitusLue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.AttentionAvant de brancher le système sur la source d'alimentation, consulter les directives d'installation.WarnungVor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.AvvertenzaConsultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.AdvarselLes installasjonsinstruksjonene før systemet kobles til strømkilden.
REVIEW DRAFT—CISCO CONFIDENTIAL10RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsAvisoLeia as instruções de instalação antes de ligar o sistema à fonte de energia.¡Advertencia!Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.Varning!Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten.
REVIEW DRAFT—CISCO CONFIDENTIAL11RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1005—Circuit BreakerWarningThis product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 10A, 240 Vac.WaarschuwingDit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting (overstroom). Controleer of de beschermingsinrichting niet meer dan: 10A, 240 Vac is.VaroitusTämä tuote on riippuvainen rakennukseen asennetusta oikosulkusuojauksesta (ylivirtasuojauksesta). Varmista, että suojalaitteen mitoitus ei ole yli: 10A, 240 Vac.AttentionPour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend de l'installation électrique du local. Vérifiez que le courant nominal du dispositif de protection n'est pas supérieur à : 10A, 240 Vac.WarnungDieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als: 10A, 240 Vac beträgt.AvvertenzaQuesto prodotto dipende dall'impianto dell'edificio per quanto riguarda la protezione contro cortocircuiti (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating superiore a: 10A, 240 Vac.AdvarselDette produktet er avhengig av bygningens installasjoner av kortslutnings (overstrøm)-beskyttelse. Påse at verneenheten ikke er merket høyere enn: 10A, 240 Vac.AvisoEste produto depende das instalações existentes para proteção contra curto-circuito (sobrecarga). Assegure-se de que o fusível ou disjuntor não seja superior a: 10A, 240 Vac.¡Advertencia!Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del edificio. Asegúrese de que el dispositivo de protección no sea superior a: 10A, 240 Vac.Varning!Denna produkt är beroende av i byggnaden installerat kortslutningsskydd (överströmsskydd). Kontrollera att skyddsanordningen inte har högre märkvärde än: 10A, 240 Vac.10A, 240 Vac.
REVIEW DRAFT—CISCO CONFIDENTIAL12RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1040—Product Disposal10A, 240 Vac.10A, 240 Vac.10A, 240 Vac.WarningUltimate disposal of this product should be handled according to all national laws and regulations. WaarschuwingHet uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.VaroitusTämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti.AttentionLa mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent.WarnungDie Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen.AvvertenzaLo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.AdvarselEndelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og bestemmelser.AvisoDeitar fora este produto em conformidade com todas as leis e regulamentos nacionais.¡Advertencia!Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.Varning!Vid deponering hanteras produkten enligt gällande lagar och bestämmelser.
REVIEW DRAFT—CISCO CONFIDENTIAL13RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsAvisoO descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais.AdvarselEndelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler.
REVIEW DRAFT—CISCO CONFIDENTIAL14RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1072—Shock Hazard from InterconnectionsWarningVoltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods, unless the exposed metal parts are located within a restricted access location and users and service people who are authorized within the restricted access location are made aware of the hazard. A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. WaarschuwingVoltages kunnen elektrische schokken veroorzaken in PoE (Power over Ethernet)-circuits als er verbindingen worden gemaakt met blootliggende metalen contactpunten, geleiders of aansluitingspunten die niet zijn geïsoleerd. Gebruik dit type verbinding niet tenzij de blootliggende metalen onderdelen zich bevinden op een locatie met beperkte toegang en de gebruikers en onderhoudstechnici die toegang tot deze locatie hebben, op het gevaar worden gewezen. De locatie met beperkte toegang kan alleen worden geopend met speciaal gereedschap, slot en sleutel of een andere beveiligingsmethode.VaroitusSisäisissä Ethernet (PoE) -virtapiireissä voi olla sähköiskun vaaran aiheuttavia jännitteitä, jos kytkentöihin käytetään eristämättömiä paljaita metalliliittimiä tai -johtimia. Vältä tällaisia kytkentöjä, elleivät paljaat metalliosat ole rajatussa paikassa. Ilmoita valtuutetuille käyttäjille ja huoltohenkilöille vaarasta. Rajattuun alueeseen pääsee käsiksi ainoastaan erityistyökalua, lukkoa ja avainta tai muuta turvallista menetelmää käyttämällä. AttentionLes tensions existant sur les alimentations utilisant la technologie PoE (Power over Ethernet) peuvent constituer un risque d'électrocution si les interconnexions sont effectuées en utilisant des terminaux, conducteurs ou contacts métalliques exposés non isolés. Évitez d'utiliser de telles méthodes d'interconnexion à moins que les pièces métalliques exposées ne se trouvent dans un emplacement d'accès restreint et que les utilisateurs et les responsables du service autorisés dans cet emplacement d'accès restreint ne soient conscients du danger. Une zone d'accès restreint peut être accédée uniquement à l'aide d'une clé, d'un outil et d'un verrou spécial, ou d'autres moyens de sécurité.WarnungBei Power-over-Ethernet-(PoE-)Schaltkreisen besteht u.U. Stromschlaggefahr, wenn Verbindungen unter Verwendung nicht isolierter, freiliegender Metallkontakte, Leiter oder Anschlussklemmen hergestellt werden. Vermeiden Sie das Herstellen solcher Verbindungen, es sei denn, die freiliegenden Metallteile befinden sich an Orten mit beschränktem Zugang, und Personen, die Zugang dazu haben, sind ausdrücklich über diese Gefahr informiert worden. Ein Ort mit beschränktem Zugang ist nur mit Hilfe eines speziellen Werkzeugs, Schloss und Schlüssels oder anderen Sicherheitseinrichtungen zugänglich.AvvertenzaNei circuiti con alimentazione via Ethernet (PoE) possono verificarsi pericoli di scosse elettriche se si creano connessioni con contatti metallici, conduttori o terminali scoperti. Evitare di utilizzare i metodi di connessione sopraelencati a meno che le parti metalliche esposte non si trovino in una zona riservata e gli utenti e il personale di assistenza, che sono autorizzati ad accedere nella suddetta zona, siano stati messi al corrente del pericolo. È possibile accedere alla zona riservata solamente utilizzando gli appositi elementi di sicurezza.
REVIEW DRAFT—CISCO CONFIDENTIAL15RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsAdvarselI strømkretser med PoE (Power over Ethernet) kan det være spenninger som kan utgjøre støtfare hvis det blir foretatt sammenkoblinger med uisolerte, eksponerte kontakter, ledere eller terminaler av metall. Unngå å bruke slike sammenkoblingsmetoder med mindre de eksponerte metalldelene er i et område med begrenset tilgang, og brukere og servicepersonell som har tilgang til det begrensede området, blir gjort oppmerksom på faren. Et område med begrenset tilgang kan bare åpnes ved hjelp av spesialverktøy, nøkkel eller andre sikkerhetstiltak.AvisoPode haver voltagens que representam perigo de choque em circuitos PoE (Power over Ethernet) se as interconexões forem feitas utilizando-se terminais, condutores ou contatos de metal exposto e sem isolamento. Evite utilizar tais métodos de interconexão a não ser que as partes de metal expostas estejam em um local de acesso restrito e os usuários e o pessoal de serviço com acesso autorizado a este local restrito estejam cientes do perigo. Uma área de acesso restrito só pode ser acessada com o uso de uma ferramenta, fechadura e chave especial ou de outros meios de segurança.¡Advertencia!Puede haber voltajes con riesgo de shock en circuitos de alimentación sobre el cableado Ethernet (PoE), si para las interconexiones se utilizan contactos, conductores o terminales metálicos descubiertos. Evite tales métodos de interconexión, a menos que las partes metálicas descubiertas se encuentren en un lugar de acceso restringido y tanto los usuarios como el personal de servicios en dicho lugar sean conscientes de la existencia de tal riesgo. Sólo se puede tener acceso a una zona de acceso restringido mediante el uso de una herramienta especial, un candado y una llave u otros medios de seguridad.Varning!Det kan finnas spänningar på PoE-kretsarna (Power over Ethernet) som utgör risk för stötar om sammankopplingarna görs med ej isolerade, exponerade kontakter, ledare och/eller terminaler av metall. Undvik att använda sådana sammankopplingsmetoder, såvida inte de exponerade metalldelarna finns i en plats med begränsad åtkomst. Användare och servicepersonal som tillåts inom platsen med begränsad åtkomst måste vara medvetna om risken. Ett begränsat område kan bara nås med ett speciellt verktyg eller lås, en speciell nyckel eller någon annan säkerhetsmetod.
REVIEW DRAFT—CISCO CONFIDENTIAL16RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1073—No User-Serviceable PartsWarningNo user-serviceable parts inside. Do not open. WaarschuwingEr zijn geen door de gebruiker te vervangen onderdelen. Niet openen.VaroitusEi sisällä käyttäjän huollettavissa olevia osia. Älä avaa.AttentionAucune pièce se trouvant à l'intérieur ne peut être réparée ou remplacée par l'utilisateur. Ne pas ouvrir.WarnungEnthält keine Teile, die vom Benutzer gewartet werden müssen. Bitte nicht öffnen.AvvertenzaNon contiene parti riparabili dall'utente. Non aprire.AdvarselInneholder ingen deler som kan repareres av brukeren. Må ikke åpnes.AvisoSem peças sujeitas a manutenção pelo utilizador. Não abrir.¡Advertencia!No contiene partes que puedan ser arregladas por el usuario. No abrir.Varning!Det finns inga delar som användare kan utföra service på. Öppna inte.
REVIEW DRAFT—CISCO CONFIDENTIAL17RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsStatement 1074—Comply with Local and National Electrical CodesAvisoManutenção somente por técnico especializado. Não abra.AdvarselIngen dele indeni som brugere kan reparere. Åbn ej.WarningInstallation of the equipment must comply with local and national electrical codes. WaarschuwingBij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. VaroitusLaitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti.AttentionL'équipement doit être installé conformément aux normes électriques nationales et locales.
REVIEW DRAFT—CISCO CONFIDENTIAL18RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Translated Safety WarningsWarnungDie Installation der Geräte muss den Sicherheitsstandards entsprechen.AvvertenzaL'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali.AdvarselInstallasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter.AvisoA instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e nacionais. ¡Advertencia!La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales.Varning!Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter.
REVIEW DRAFT—CISCO CONFIDENTIAL19RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 European DirectivesEuropean DirectivesThe following CE mark is affixed to the equipment and packaging:Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein[Bulgarian]:[Czech]:Dansk[Danish]:Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.Deutsch[German]:Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.Eesti[Estonian]:See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.English:This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español[Spanish]:Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.[Greek]:Français[French]:Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.
REVIEW DRAFT—CISCO CONFIDENTIAL20RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 European DirectivesHrvatski:[Croatian]Ova oprema je u sukladnosti s bitnim zahtjevima i drugim relevantnim odredbama Direktive 1999/5/EC.Íslenska[Icelandic]:Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.Italiano[Italian]:Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.Latviski[Latvian]:[Lithuanian]:Nederlands[Dutch]:Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.Malti[Maltese]:Magyar[Hungarian]:Norsk[Norwegian]:Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.Polski[Polish]:Português[Portuguese]:Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.[Romanian]:Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC.Slovensko[Slovenian]:Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.Slovensky[Slovak]:Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi[Finnish]:Svenska[Swedish]Türk[Turkish]:Bu cihaz 1999/5/EC Direktifi'nin temel gereklerine ve ilgili di?er hükümlerine uygundur.
REVIEW DRAFT—CISCO CONFIDENTIAL21RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 European DirectivesStatement 2002—Declaration of Conformity with Regard to the Directives 2006/95/EC and 2004/108/ECThis equipment complies with the essential requirements and other provisions of Directives 2006/95/EC and 2004/108/EC. For more information, please refer to the Declarations of Conformity.Standard ComplianceThe Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch are in compliance with national and international standards as below: •EN 60950-1: 2006•EN 60950-1/A1: 2010•EN 60950-1/A2:2013•EN 60950-1/A11: 2009•EN 60950-1/A12: 2011•EN55022, 2010+AC2011•EN55024, 2010•EN62311, 2008•IEC60950-1, 2nd+AM1+AM2•UL60950-1, 2nd•CISPR22, 2010•CISPR24, 2010•47 CFR FCC PART15 B•ICES-003, 2012 issue 5•47 CFR FCC PART15 C•47 CFR FCC PART15 E•RSS-GEN, RSS-100, RS-210Safety of Information Technology Equipment•EN50385: (2002-08)Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public•EN 300 328 V1.8.1:2012Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive•EN 301 893 V1.7.1:2012 Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
REVIEW DRAFT—CISCO CONFIDENTIAL22RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 European Directives•EN 301 489-1 V1.9.2:2011Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements•EN 301 489-17 V2.2.1:2012Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission SystemsFor specific details about the years, revisions and relevant amendments please refer to the applicable declaration of conformity available at http://www.ciscofax.com.Canadian Compliance StatementsThis device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.Caution (i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.Avertissement (i) Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.FCC Declaration of Conformity Information (for USA only)Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch
REVIEW DRAFT—CISCO CONFIDENTIAL23RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 European DirectivesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help.Note Equipment must be installed and operated using the relevant manuals and only installed with the correct cables and connectors. Cisco Systems Inc. is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible party:Cisco Systems Inc.170 West Tasman DriveSan Jose, CA 95134USA+408 526-7208
REVIEW DRAFT—CISCO CONFIDENTIAL24RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 China RoHS Table w/NoteChina RoHS Table w/NoteNote This Table is a regulatory document required for products shipped to the People’s Republic of China.EMC Class B Notices and WarningsThis section includes the EMC Class B warnings for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch.Statement 2018—Class B Notice for FCCModifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver.
REVIEW DRAFT—CISCO CONFIDENTIAL25RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 EMC Class B Notices and Warnings•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help. Statement 2022—Class B Notice for CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Statement 295—Class B Warning for KoreaWarningThis is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.WarningThe service related to human safety is not allowed because this device may have the possibility of the radio interference.해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음
REVIEW DRAFT—CISCO CONFIDENTIAL26RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Japanese Electric Appliance and Radio LawsStatement 157—VCCI Compliance for Class B EquipmentJapanese Electric Appliance and Radio LawsStatement 371—Power Cable and AC AdapterStatement 391—Low-Power Radio Data Communications Systems (ARIB-STD)WarningThis is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. VCCI-B
REVIEW DRAFT—CISCO CONFIDENTIAL27RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Japanese Safety InstructionsJapanese Safety InstructionsYou are strongly advised to read the safety instruction before using the product. http://www.cisco.com/web/JP/techdoc/pldoc/pldoc.htmlWhen installing the product, please use the provided or designated connection cables/power cables/AC adapters.Product Usage RestrictionsThe Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch are designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted.RadioThis section describes radio compliance conditions for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch.The Part 15 radio device operates on a non-interference basis with other devices operating in this frequency band as well as other services operating throughout the radio spectrum. Any changes or modifications to the said product without approval from Cisco could void the user’s authority to operate the device. This includes the use on non-approved antennas or 3rd party amplifiers with the radio module.Administrative Rules for Cisco Wireless Devices in TaiwanThis section provides administrative rules for operating Cisco wireless access products in Taiwan. The rules are provided in both Chinese and English.
REVIEW DRAFT—CISCO CONFIDENTIAL28RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 RadioWireless Devices with IEEE 802.11a/b/g RadiosChinese TranslationEnglish TranslationThis equipment is limited for indoor use.All Access Wireless ProductsChinese Translation
REVIEW DRAFT—CISCO CONFIDENTIAL29RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Generic Discussion on RF ExposureEnglish TranslationAdministrative Rules for Low-Power Radio-Frequency DevicesArticle 12For those low-power radio-frequency devices that have already received a type-approval, companies, business units, or users should not change its frequencies, increase its power, or change its original features and functions.Article 14The operation of the low-power radio-frequency devices is subject to the conditions that no harmful interference is caused to aviation safety and authorized radio stations; and if interference is caused, the user must stop operating the device immediately and can’t re-operate it until the harmful interference is clear.The authorized radio station means a radio-communication service operating in accordance with the Communication Act.The operation of the low-power radio-frequency devices is subject to the interference caused by the operation of an authorized radio station, by another intentional or unintentional radiator, by industrial, scientific and medical (ISM) equipment, or by an incidental radiator.Generic Discussion on RF ExposureFCC Radiation Exposure StatementIMPORTANT NOTE:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.Radiation Exposure StatementThis system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health Canada Safety Code 6. The system must be installed at a minimum separation distance from the antenna to a general bystander of 7.9 inches (20 cm) to maintain compliance with the General Populace limits.L'exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme aux limites établies par le Code de sécurité 6 de Santé Canada. Le système doit être installé à une distance minimale de 7,9 pouces (20 cm) séparant l'antenne d'une personne présente en conformité avec les limites permises d'exposition du grand public.
REVIEW DRAFT—CISCO CONFIDENTIAL30RCSI for Cisco WAP131 and WAP351 Wireless Access Points (EMC Class B Devices)78-100307-01 Declarations of ConformityDeclarations of ConformityThe Declaration of Conformity statements for this product can be found at the following URL:http://www.ciscofax.comNote If you still have questions regarding the compliance of these products or you cannot find the information you are looking for, please send an e-mail request to complianceinfo@cisco.com.Related DocumentationRefer to the following documents for additional information about the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE and the Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch:•www.cisco.com/go/100_wap_resources•www.cisco.com/go/300_wap_resourcesObtaining Documentation and Submitting a Service RequestFor information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.This document is to be used in conjunction with the documents listed in the “Related Documentation” section.Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)© 2014 Cisco Systems, Inc. All rights reserved.

Navigation menu