Delux Industry G1701 Wireless Dongle User Manual manual

Shenzhen Delux Industry Co., Ltd. Wireless Dongle manual

manual

Download: Delux Industry G1701 Wireless Dongle User Manual manual
Mirror Download [FCC.gov]Delux Industry G1701 Wireless Dongle User Manual manual
Document ID1421663
Application IDCQgB2Nny3QRuCoB4NbeLBg==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize125.33kB (1566571 bits)
Date Submitted2011-02-25 00:00:00
Date Available2011-02-25 00:00:00
Creation Date2011-02-21 14:16:55
Producing SoftwareAdobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod2011-02-21 14:17:16
Document Titlemanual
Document CreatorAdobe Acrobat 7.0

charging specification: Working Environment:
1 OM effeCtlve dIStance When using Li-on charger, ifflaSh red, please charging at once. In order to experience a new and comfortable feeling, please check these aspects
as follow, so that you can use better wireless keyboard combo.
I The receiver should be far away from the Monitor, outside disc driver or
other electronic products, in orderto prevent the radio disturbance produced
low voltage LED flaSh by other electronic products.
. .. .. . ". , Two ways for charging optional: The radio signal can penetrate Iignin, glass and so on the non-metallic
WI R E L E s S . . h . . . 7 , , 9 1.Ifthere is charger,connecting charger into 220V power SUPP'Y, and PUt objects, achieves 360 degree free transmit, but it can not penetratethe metal
charging connecting cable into charger pedestal. materials, so please do not put the mouse and the receiver onto the metallic
10|V| effective distance I I I l l“ — 2.0ne side connecting charger into computer USB, the other side put it into tabletop.
charger pedestal.
Announcement: . Please be_sure there is no big size metal between the keyboard and
receiver, otherW|se the connection Will be affected.
1.When charging, please move to ON (3 —I
SWitCh The standardized receiving distance we offered is under certain radio
2.After charging, LED Wi” be from red to Move to ON disturbance environment, the normal environment are better, the actual
green. switch receiving distance is higher than standardized, but if mix-machine, motor,
electric drill and other strong electronic equipments operating nearby, which
may lead to slowly receiving or other abnormal.
K2880G+G17
Wireless keyboard sets
Speclflcatlon: FCC Statement; authority to operate this equipment. (Example- use only shielded interface
Thanks for choosing 2.4G wireless keyboard with touch-pad
cables when connecting to computer or peripheral devices).
and mUItI-medla’ please read the manual before usmg. K28806 Keyboard This equipment has been tested and found to comply with the limits fora Class _ _ _ _ . _ _
I 2.4G wireless, better anti-interference 10M effective distance B digital device, pursuant to part 15 of the FCC rules. These limits are aligwerqgitpfllrgecrgngfirgpges wuth Part 15 of the FCC Rules. Operation IS subject to the
contents: . Ergonomic and Mme design, more convenient designed to provide reasonable protection against harmful interference in a (1)This device may not cause harmful interference, and
I Mute tech, prowding comfortable touch feeling residential installation. This equipment generates, uses and can radiate radio (2) This device must accept any interference received, including interference that may
I Power saving,extended batterylifetime. frequency energy and, if not installed and used in accordance with the cause undes'fed Operat'on-
I 500mA Li-on charger battery, keyboard charging pedestal and low instructions, may cause harmful interference to radio communications. c ti I’ll
W battery indicator However, there is no guarantee that interference will not occur in a particular au 0 '
(317 Receiver installation. Ifthis equipmentdoes cause harmfulinterference The manufacturer is not responsible for any radio or TV interference caused by
to radio or television reception, which can be determined by turning the unauthorized modifications to this equipment. Such modifications could void the user
I Exqwsne deS|gn,fash|onal and noble , equipment off and on, the user is encouraged to try to correct the interference aUthor'tyto Operatethe equ'pmem'
l USB connector, plug and play, convenient and easy. by one or more ofthe following measures:
Charger usmg manual: -Reorient or relocate the receiving antenna.
I 500mA Li-on charger battery, it can be used for fifteen days, when charger -Increase the separation between the equipment and receiver.
voltage is low, the LED in the middle ofmouse right and left keys will -Connect the equipment into an outlet on a circuit different from that to which
shine, please use keyboard and mouse function. the receiver is connected.
When keyboard iS charging,_it Wi|| flash in red CO|0F Of LED, if0k, LED -Consult the dealer or an experienced radio/TV technician for help.
WI“ “33h green. The whole time needsthree or four hours. To assure continued compliance, any changes or modifications not expressly
Charging pedestal Charger(optiona|) When do not use keyboard, put it into ON/OFF switch, power saving. approved by the party responsible for compliance could void the user's
K288OG G17 Charger
wireless keyboards receiver USB cable
I!
Introduction of the receiver:
The light on the receiver will flash when the receiver is working.
Connection of the receiver:
I Connecting the receiverto the PC by the USB port
I The “CONNECT" on the receiver is using to connect to the mouse or the
keyboard. Find more instruction in “Building up connection between the
mouse/keyboard and receiver” if connecting successfully, the keyboard page DUMDDUuE—fl‘ g;
and the mouse could be working. At this time when you use the keyboard or the ' “WODEDB; 3
mouse, the light on the receiver will flash quickly.
Building up connection between Tips:
the keyboard and receiver: I Check the battery direction should be correct.
1. Press the “CONNECT” button at the bottom of the keyboard. Ifconnecting
successfully, the keyboard could be working. At this time when you use the keyboard,
the light on the receiver will flash quickly. If failed, repeat the above operation. . Check the battery whether is enough
I Reduce the distance ofthe receiver and the keyboard
I Check the receiver again, be sure it is connected to the USB port.
I Re-establish the keyboard and the receiver communication channel.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2011:02:21 14:17:16+08:00
Create Date                     : 2011:02:21 14:16:55+08:00
Metadata Date                   : 2011:02:21 14:17:16+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:21fc30f6-677e-4de9-a5f5-d2ec2462bb02
Instance ID                     : uuid:2c1a812f-6700-430c-84a7-0dec5e9af649
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 7.0
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SGPG1701

Navigation menu