Delux Industry K190001 Wireless Keyboard User Manual
Shenzhen Delux Industry Co., Ltd. Wireless Keyboard Users Manual
manual
K1900G+G01UF Manual
Thank you for choosing this 2.4G wireless keyboard, please read the manual of
installations and specification.
Specification
K1900G+G01UF wireless keyboard
· 2.4G wireless, strong anti-interference, effective distance 10 M.
· 18 sets multi-media hot keys, convenient for Internet
· Hair-line drawing, metal feeling.
· New chocolate keycaps, soft touch feeling.
· Fashionable outlook, super slim design, best choice for LCD monitor.
· Ergonomics designed wide palm rest, can reduce the tiredness for long time
working
G01UF receiver
2.4G Mini receiver
1、Favorites 2、refresh 3、home page 4、up page 5、down page 6、mail 7、search
8、play/pause 9、 stop 10、up 11、next 12、volume down13、volume up
14、mute 15、my computer 16、calculator 17、sleep 18、multimedia start
Instruction of the battery
· It takes 2*AAA (7#)batteries for the wireless keyboard
· Please take out the batteries if you do not use the wireless products for long
time, and keep them in a cool and dry place
· Please do not use the battery if leaking, discoloration, distortion or other
abnormity happens.
Battery installation to the keyboard
1. Press the button on the keyboard, the battery buckle will eject out
2. Put 2 AAA（7#) batteries in correct direction
3. Cover the buckle
Connection of the receiver
Connecting the receiver to the PC by the USB port
Building up connection between the mouse or the keyboard and receive
If there is radio disturbance from other wireless keyboard or mouse
Somebody try to build up the connection, but failed
Building up connection between the keyboard and receiver
Pull out the receiver from the USB port at first, and press the “CONNECT” button at
the bottom of the keyboard, the indicator on the keyboard will flash at this time.
Connect the receiver to the USB port within 15 seconds, when the USB receiver is
detected, the indicator will turn off, and can be used. If not, please try again.
Working Environment
The receiver should be far away from the monitor, outside disc driver or other
electronic products.
The radio signal can penetrate lignin, glass and other the non-metallic objects,
realizing 360 degree free transmit, however, it can not penetrate the metal
materials. So please not put the mouse, keyboard and the receiver onto the
metallic tabletop.
Please be sure there is no big metal between the mouse (keyboard) and receiver,
otherwise the connection will be affected.
Optical mouse is suitable for operating media wooden, paper or cloth, but not for
the ratent, such as glass and smooth rubber. A mouse pad is needed in such
environment.
The standardized receiving distance we offered is under certain radio disturbance
environment, the normal environment are better, the actual receiving distance is
higher than standardized, but if mix-machine, motor, electric drill and other strong
electronic equipments operating nearby, which may lead to slowly receiving or
other abnormity.
Debugging tips
Check the receiver again, and make sure it is connected to the USB port.
Check the battery direction should be correct.
Re-establish the mouse (or keyboard) and the receiver communication channel.
Reduce the distance of the receiver and the mouse (or keyboard)
Change a pair of new battery
Put the “on-off” button to “On”
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user authority to operate the equipment.