Delux Industry K2000 Wireless Keyboard User Manual UM
Shenzhen Delux Industry Co., Ltd. Wireless Keyboard UM
user manual
K2000G+ G03UF 2.4G wireless Keyboard Users’ Manual
Specification
K2000G Keyboard
2.4G wireless, effective distance 10M
Power saving, extended battery lifetime
Accurate low battery detection and indication circuit built-in
Nano receiver inside the battery, portable
With power switch on the keyboard, pressing to “OFF”, saving power
Exempts to the code for user-friendly
2.4 G Nano receiver
It takes 2*AAA batteries for the wireless keyboard
Please take out the batteries if you do not use your wireless keyboard for long time, laying
aside cool dry place preservation;
The inside batteries belong to the extra free products, without any guarantee
If the red low power indicator flashes, please change the battery
Please use the same alkaline cell, and do not misuse the old and new battery;
Please do not use the battery again if leaking, discoloration, distortion or other abnormal.
Battery installation
Pull the back of the keyboard, the battery buckle will eject out.
Put into two AAA（7#）batteries in correct direction.
Cover the buckle.
Connection of the receiver
Connects the receiver to the PC with USB port
Build up the connecting for the following cases.
Disturbances from other mouse or keyboard;
Someone builds up the connecting, but fail.
Building up connection between the keyboard and receiver
Pull out the receiver from the computer, and press the “CONNECT” on the bottom of the keyboard,
the indicator on the front flashes; insert the receiver into the USB in 15 seconds, when the
computer detects the USB receiver, the keyboard indicator will lights out, then it can work
regularly. If not, please try again.
Usage of composite keys
The composite keys will work when the “Fn” on the lower left quarter at the same time is pressed
at the same time, for example, Fn+F10/ScrollLock means ScrollLock. The keyboard has the
number-keyboard function. Press “NumLock” to start the number keys function. The dual color
character-keys to the right part of the keyboard are served the same as the normal character-keys.
Working Environment
When you are using the advanced digital technology product and feel a new sense of comfort and
convenience, please check the following several aspects to make the wireless keyboard and mouse
can achieve the best effects.
The receiver should be far away from the Monitor, outside disc driver or other electronic products,
in order to prevent the radio disturbance produced by other electronic products the suggested
distance is above 20 centimeters;
The radio signal can penetrate lignin, glass and so on the non-metallic objects, achieves 360 degree
free transmit, but it can not penetrate the metal materials, so please do not put the keyboard and the
receiver onto the metallic tabletop, suggested distance is above 20 centimeters;
Please make sure there is no big size metal between the keyboard and receiver, otherwise the
connection will be affected;
The standardized receiving distance we offered is under certain radio disturbance environment.
The normal environment is better, the actual receiving distance is higher than standardized, but if
mix-machine, motor, electric drill and other strong electronic equipments operating nearby, which
may lead to slowly receiving or other abnormal.
Note:
FCC statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Debug tips
Check the receiver again, be sure it is connected to the USB port.
Check the battery direction should be correct.
Reduce the distance of the receiver and the keyboard
Change a pair of new AAA battery