Delux Industry M108 Wireless Mouse User Manual Users manual
Shenzhen Delux Industry Co., Ltd. Wireless Mouse Users manual
user manual
K1000+M108+G01UF USER MANUAL
Installation
Fitting Batteries in the Keyboard
1. Turn the keyboard upside down.
2. Remove the battery compartment cove.
3. Insert the one batteries in the battery compartment of the
keyboard .Ensure that the battery poles correspond to the “+”and
“－”markings.
4. Slide the battery compartment cover back on until it locks into place.
Fitting Batteries in the Mouse
1. Turn the mouse upside down
2. Remove the battery compartment cover by putting pressure on the recess
and carefully pushing the cover upwards
3. Insert the two batteries in the battery compartment of the mouse .Ensure
that the battery poles correspond to the “+” and “－” markings.
4. Slide the battery compartment cover back on until it locks into place.
Connecting the Receiver
1. Insert the wireless USB dongle receiver in the USB socket of your PC.
2. Pull out the receiver from the computer, and press the “CONNECT” on
the bottom of the keyboard, the indicator on the front flashes; insert the
receiver into the USB in 15 seconds, when the computer detects the USB
receiver, the keyboard indicator will lights out, then it can work regularly.
If not, please try again.
Trouble Shooting:
1. No connection between the mouse and the receiver.
Re-insert the receiver. Try to insert receiver to another USB port on your
Computer.
2. No any response on the mouse. Take out the battery from the mouse and
Reinstall it with correct, orientation. Try a new battery if necessary.
3. No any response on the Keyboard, Take out the battery from the Keyboard
and reinstall it with correct orientation, Try a new battery if necessary.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This device has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause interference and
2. This device must accept any interference received, including interference
that may cause undesired operation.