Delux Industry OM0202 Wireless Keyboard User Manual
Shenzhen Delux Industry Co., Ltd. Wireless Keyboard
User manual
OM-OZG+GO1UF WIRELESS KEYBOARD TOCREATE VALUE CUSTOME ¢ TO CREATE VALUE FOR CUSTOMERS Thanks for choosing 2.4G wireless keyboard, please read the manual Specification: before using. Keyboard 2.4 (3 wireless, effective distance 10M 10 sets mulli-media keycaps, comfortable Contents: Powersaving, extended battery lifetime Low battery indicator Receiver Mini design with fashion 2 4G ultrarsllm keyboard Receiver Instruction 0f the battery It takes 2'AAA batteries for the Wireless keyboard Please take outthe batteries if you do not use the wireless products .— for long time, and keep them in a cool and dry place Please do not use the battery if leaking, discoloration, distortion or otherabnormity happens. 2"AAA batterles Manual Battery installation to the keyboard Alower battery indicator is adopted in the keyboard. It will flash when the batteries are running out. At this time please change the batteries, you are 1‘ Press the button on the keyboard, the battery buckle will elect out recommended to use the battery with the same type, new battery and old battery cannot be mixed to use. Connection ofthe receiver Connecting the receiver to the PC bythe USB port Building up connection between the keyboard and receiver Please build up the connection under the conditions as follow: 2‘ Put into 2’ AAA t7#> batteries in correct direction If there is radio disturbance from other wireless keyboard or mouse Somebody try to build up the connection, butfailed 3. Coverthe buckle a fiéffi’x: OM'02G+G01UF”l§E§Eii§lHH23 NEE: iifi128gilfililiéffi+ijgfi1009 \J'Lj’éfi EWrTflJ: Ei’fi Nil: 145*105mm Building up connection between the keyboard and receiver Pull outthe receiverfrom the USB port at first, and press the CONNECT button at the bottom of the keyboard, the indicator on the keyboard will flash at this time. Connect the receiverto the USB portWithin 15 seconds, when the USB receiver is detected, the Indicator will turn off, and can be used. If not. please try again. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital deVice. pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined byturning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. ilncrease the separation between the equipment and receiver, iconnect the equipment into an outlet on a circuit different from that to which the receiver is connected, —Consult the dealer or an experienced radio/TV technician for help. Trouble Shooting I Check the receiver again, be sure it is connected to the USB port. I Check the battery direction should be correct, I Check the battery if have enough power, If not, then need change to use another 2“AAA batteries I Reduce the distance of the receiverand the keyboard " Working Environment The receiver should be far away from the Monitor. outside disc driver or other electronic products, in order to prevent the radio disturbance produced by other electronic products the suggested distance is above 20 centimeters The radio signal can penetrate Iignin, glass and so on the non-metallic obiects, achieves 360 degree free transmit, but it can not penetrate the metal materials, so please do not put the mouse and the receiver onto the metallic tabletop, suggested distance is above 20 centimeterS:P|ease be sure there is no big size metal between the mouse and receiver, otherwise the connection will be affected. Optical mouse is suitable for operating media wooden, paperor cloth, but not for the ratent, such as glass and smooth rubber. A mouse pad is needed in such environment. The standardized receiving distance we offered is under certain radio disturbance enVironment, the normal environment are better, the actual receiving distance is higher than standardized. but if mix~machine, motor, electric drill and other strong electronic equipments operating nearby, which may lead to slowly receiving or otherabnormity. m This device must not be co~located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (i ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment, Such modifications could void the userauthority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2012:09:18 18:46:37+08:00 Create Date : 2012:09:18 18:45:43+08:00 Metadata Date : 2012:09:18 18:46:37+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:3c9e218e-b5f5-4fda-9f1e-89aafa8ba548 Instance ID : uuid:6accac62-b5ce-4e33-8202-3458d2cdb394 Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Page Count : 2 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools