Denso BTAU01A Audio Bluetooth Hands Free Unit User Manual Technical for Navigation ECU
Denso Corporation Audio Bluetooth Hands Free Unit Technical for Navigation ECU
Denso >
Users Manual
6. User’s manual requirement 6.1.Operation manual (1) Registration of the cellular phone Bluetooth RF signal Transmits the registration signal from the cellular phone to the audio system and register the cellular phone at the audio system. (2) Selection of the cellular phone Bluetooth RF signal Transmits the selection signal from the audio system to the cellular phone and connect the audio system with the cellular phone. (3) Call Cellular RF signal Bluetooth RF signal Call by selecting the phone book with the audio switch installed in the audio system. Get the phone by operating the audio switch installed in the audio system. 6.2.User’s Manual Requirement of FCC rule BTAU01A and BTAU02A are installed in vehicle’s Audio System, so BTAU01A and BTAU02A has no manual for user. FCC user’s manual requirements that are FCC rule Part 15.21 and 15.105 are described on user’s manual of the vehicle as followings. FCC and RSS-210 Regulations This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different form that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. CAUTION : Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). Co-location : This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2005:06:03 18:18:25+09:00 Create Date : 2005:06:03 18:18:08+09:00 Page Count : 2 Creation Date : 2005:06:03 09:18:08Z Mod Date : 2005:06:03 09:18:08Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : ‹ZpŠÇ—•” Metadata Date : 2005:06:03 09:18:08Z Creator : ‹ZpŠÇ—•” Title : Technical Document for Navigation ECU Page Mode : UseNone Tagged PDF : YesEXIF Metadata provided by EXIF.tools