DesignTech TX4B Security R/C Transmitter User Manual Extra TX Draft p65

DesignTech International Inc Security R/C Transmitter Extra TX Draft p65

users manual

V1.0Extra TransmitterUser Manual7955 Cameron Brown CourtSpringfield, VA 22153, USA#25561 & #28871Coding your new transmitter to your product(Models 20630 )1. Power down the unit by pulling out the 15 amp blue fuse for a few seconds, then replace it.  You willhear a quick confirmation chirp.  You now need to program the unit to recognize all of the transmittersyou will be using.2. Press and hold the middle button on the first transmitter until you hear a chirp from the siren.  Toteach multiple transmitters (up to 4), repeat this process within five seconds with each additionaltransmitter.  Only one button needs to be pushed per transmitter.HELP LINE:For any assistance regarding this product you may call DesignTech on our toll-free telephonenumber — (800) 337-4468.Additional transmitters can be purchased directly through your local dealer or Design-Tech at the address below.  See front cover for part numbers.Three button transmitters -  25561 $49.95Five button transmitters -  28871 $54.95All prices include shipping and handling.This device complies with Part 15 of the FCC Rules.  Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.FCC ID: ELGTX3B & ELGTX4B CANADA _________________Changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment.
Extra Transmitter Manual 00-55                             Page Page 3                                                    Extra Transmitter Manual 00-55NOTE: These transmitters will not operate other manufacturers alarms or keyless entry systems.

Navigation menu