Detector Electronics 30ATX1 Car Alarm User Manual Operational Manual

Detector Electronics Company Car Alarm Operational Manual

Operational Manual

Download: Detector Electronics 30ATX1 Car Alarm User Manual Operational Manual
Mirror Download [FCC.gov]Detector Electronics 30ATX1 Car Alarm User Manual Operational Manual
Document ID60566
Application IDbbcN2VeQFOATXat3RxFldg==
Document DescriptionOperational Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.16kB (39474 bits)
Date Submitted1999-09-27 00:00:00
Date Available1999-10-22 00:00:00
Creation Date2001-05-25 16:09:35
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-05-25 16:09:36
Document TitleOperational Manual

OPERATING MANUAL
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions : (1)This device may not cause harmful interference, and (2)This device must
accept any interference received, including interference that may cause undesired operation.
Caution : Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
1. Name of products : Wireless Vehicle Alarm System
2. Model No. : D – 300A (Transmitter ; D-300AT, Receiver ; D-300AR)
3. Operation
(1) Press button 1 of the transmitter for 1 sec, lock the door with the 1 chirp
sound and 1 parking lights flash, and arm & cut off the starter after 5 sec.
(2) Press button 2 of the transmitter for 1 sec, unlock the door with the
2 chirp sounds and 2 parking lights flashes, and disarm & release the
starter at once.
(3) Press button1 of the transmitter for 3 sec, blow the siren with the parking
lights flash for 3 min. To stop the siren, press button 2 for 1 sec.
(4) Press button 2 of the transmitter for over 3 sec, release the trunk. At that
time, unlock the door and disarm also.
(5) Whenever press button 3 of the transmitter for 3 sec, change the mode as
follows.
a. Silent Mode : Change the mode after 8 chirps. All function is operated
but chirp sounds.
b. Valet Mode : Change the mode after 6 chirps. Door lock & unlock and
trunk release are only operated without the chirp sound.
Interrupt the arming & the start kill.
c. Normal Mode : Change the mode after 4 chirps. All function is
operated normally.
(6) To disarm without the transmitter if it was lost, damaged or disable, turn the
vehicle’s ignition key to the “on” position and the “off” position repeatedly
by twice within 15 sec after get on the car and close the door.
4. Specification
(1) Transmitter : a. voltage
: 12V battery
b. frequency : 311.0 MHz
(2) Receiver
: a. voltage
: 12V battery
b. frequency : 311.0 MHz
(3) Operating Temperature
: - 10°C ∼ 60°C

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:05:25 16:09:35
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:05:25 16:09:36-04:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OP930ATX1

Navigation menu