Detex EAX 2500 How To Order Guide
User Manual: Detex EAX-2500 How to Order Guide Literature
Open the PDF directly: View PDF 
.
Page Count: 1
-2500 HOW TO ORDER
EXTENDED BYPASS
0 = Alarm must be manually turned o; or may
be eld selected for 2 min. Auto Re-arm
3 = Alarm must be manually turned o; or may
be eld selected for 10 min. Auto Re-arm
4 = Alarm must be manually turned o; or may
be eld selected for 20 min. Auto Re-arm
5 = Alarm must be manually turned o; or may
be eld selected for 3.3 hours. Auto Re-arm
COLOR
For standard gray,
leave blank
BK = Black
BACK BOX
If no back box needed, leave
blank
S = Surface Mounting
F = Flush Mounting
SK1 = Surface Kit: Surface
mount back box, 24
VAC transformer,
surface door contacts
FK1 = Flush Kit: Flush mount
back box, 24 VAC
transformer, ush door
contacts
C = Conversion kit for retrot
from EA-2500F
ARMING DELAY
0 = 15 Second Arming Delay
1 = 1 Second Arming Delay
2 = 5 Second Arming Delay
4 = 4 Minute Arming Delay
POWER
If power provided by others, leave
blank
IN = Includes 220 Transformer
277 = Includes 277 Tranformer
L9 = Remove 9 volt Backup Battery
EAX-25
September 5, 2018
xxxx
x
Detex products can expose you to chemicals including
Chromium (hexavalent compounds) and Lead, which are
known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information
go to www.detex.com/prop65
MISCELLANEOUS
If not required, leave blank
KS = Key Stop, factory installed
CYLINDER
If cylinder provided by others,
leave blank
MC65 = Mortise Cylinder
IC7 = 7-pin IC Cylinder Housing
(core not included)
IK7 = Cylinder InstaKey Housing
(core not included)
SIGNAGE
For standard red with white letters in English,
leave blank
RWS = Red with white letters Spanish
GWE = Green with white letters English
GWF = Green with white letters French
RWF = Red with white letters French Canadian
GWG = Green with white letters German
GWC = Green with white letters Chinese
GWE = Green with white letters German/English
STATUS INDICATOR
If status indicator not
required, leave blank
SI = Status Indicator On
x
NOTE: * = default
