DewertOkin RF258D Remote Control 258D User Manual 900 series 2012 11 14x

Download:
Mirror Download [FCC.gov]
Document ID	1853244
Application ID	ESpsKz65GK22n9qOUdHfdw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	205.67kB (2570819 bits)
Date Submitted	2012-12-05 00:00:00
Date Available	2012-12-05 00:00:00
Creation Date	2012-11-30 16:00:59
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-12-04 19:53:41
Document Title	Microsoft Word - 900_series_2012-11-14.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	junexie

Control unit 900 Series
mounting + operating
1 Overview
This control unit is designated to operate an electrically driven bed with optional comfort
functions.
•
Power supply is provided via SMPS so the control box has protection class III.
•
The system is operated with an RF remote. The RF receiver is integrated into the
control unit.
Bed view from beneath
Actuator 1
Massage motor 1
Actuator 2
Massage motor 2
Control unit
Here for example you can see a control unit with two actuators and two massage motors
connected
October 31, 2012
Page 2 of 12
2 Mounting the control unit
This mounting bracket is fixed on
the flipside of the bed
These two bolts fix the position of
the control unit between the
mounting bracket.
The clip snaps in the holding
fixtures of the control unit
October 31, 2012
Page 3 of 12
Control Unit 258-4
2.1 (with integrated Bluetooth® module)
October 31, 2012
Page 4 of 12
Performance data control unit
Duty cycle
2/18 min. or 10 %, max, 5 switching cycles per minute
Output voltage
29 V / 6A
Further features
Housing colour
black RAL 9005
Housing material
ABS + PC
Ports
drives: 4 actuators / 2 vibration motors
1 power input / 1 multifunction output /
2 USB ports /1 DC output
Indicators + buttons
Reset + pairing button / Pairing LED for RF
Power LED
Protection type
IP20
Protection class
III
Relative humidity
30% - 75%
Ambient temperature
+50°F - +104°F
Power supply
external
®
WT12 Bluetooth module
“Contains
FCC ID: QOQWT12A
“Contains
IC: 5123A-BGTWT12A”
October 31, 2012
Page 5 of 12
Integrated RF receiver
Key
Function
Pairing enable
Performance data RF receiver
modulation
GFSK
Frequency Range
2.403~2.480GHz
Battery
30V supply voltage
Working Current
<60mA
Standby Current
<20mA
Ambient Temperature
-40—85Ԩ
PCB Material & Size
October 31, 2012
FR4 1.6mm 120*120mm
Page 6 of 12
2.2 Power supply 3.00.209.033.00
Connecting cable73178 to control box
Power supply cable 3.00.401.151.30 to mains power
Performance data
Output voltage
29 V DC constant voltage output
Components
Indicators
LED operating status indication (green)
Colour
black RAL 9005
Further data
Protection type
IP20
Protection class
II
Relative humidity
30% - 75%
Ambient temperature
+50°F - +104°F
Power supply
wide input voltage range 100-240 V AC
Safety
NTC temperature sensor, thermal fuse, current sensing
and limitation by control circuit, self resetting
current limiting fuse on primary side as double safety, not
self resetting
October 31, 2012
Page 7 of 12
Remote Control 258D
Frontside
Key
Function
Massage Head +
Massage timer ON/OFF
Massage Foot +
10
Massage Head -
11
12
13
Start all Massage
14
15
16
Massage Foot -
Relay 1 on
Relay 3 on
Relay 2 on
10
Relay 4 on
11
Relay 5 on
12
Position Zero G
13
Relay 7 on
14
Relay 6 on
15
Light ON/OFF
16
Relay 8 on
17
Position All flat
18
Position Lounge
19
Position TV/PC
20
Pairing
17
18
19
Pairing button
& battery box
(flipside)
Insert 3x AAA
October 31, 2012
20
Page 8 of 12
Performance data remote
(RF transmitter)
Modulation
GFSK
Frequency Range
2.403~2.480GHz
Battery
AAA
Working Current
<40mA
Standby Current
<8uA
Ambient Temperature
-40—85Ԩ
RC Dimension
145*50*14mm
PCB Material & Size
FR4 1.6mm 79*42mm
Housing Material
ABS+PC
October 31, 2012
Page 9 of 12
3 Board Schematics (remote)
3.1 Remote
3.2 RX module
Pls insert diagram
October 31, 2012
Page 10 of 12
4 Functional Description
Take cable 3.00.401.151.30 and connect it to mains supply.
The system is delivered paired!
You can test the functions of the system with the RF remote.
Pairing instruction (in case of trouble)
Pairing the remote with the control box.
The distance between remote and control box for pairing should be less than 2 meters!
1. Remove the battery cover on the flipside of the remote.
2. Insert/check existing 3x AAA batteries.
3. Push the reset button on the control box twice with something spiky.
The green pairing LED adjoining is lit.
Now you have 10 s to pair remote and receiver.
4. On the flipside of the remote is a silicone push button positioned above the batteries
(13).
A blue LED starts blinking as the button is pressed.
Keep it pressed until the blue LED is lit continuously, then pairing is completed, the
blue LED light fades away.
IC warning
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
- French:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."
RSS-102 Statement: This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
Déclaration CNR-102: Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
October 31, 2012
Page 11 of 12
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and
operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
October 31, 2012
Page 12 of 12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2012:11:30 16:00:59+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:12:04 19:53:41+08:00
Metadata Date                   : 2012:12:04 19:53:41+08:00
Format                          : application/pdf
Creator                         : junexie
Title                           : Microsoft Word - 900_series_2012-11-14.docx
Document ID                     : uuid:189e5d0e-92ff-4b46-a721-98de2ade23e1
Instance ID                     : uuid:8cf83190-800c-4376-9c70-ab7ee34972df
Page Count                      : 12
Author                          : junexie

EXIF Metadata provided by EXIF.tools