Dexin MW1053 Wireless Mouse User Manual

Dexin Corp Wireless Mouse

Users Manual

1 RF WIRELESS MULTIMEDIA MOUSEUSER’S MANUALModel #: MW1053
2Important Ergonomic InformationSome experts believe that using any mouse or trackball may cause serious injury to hands,wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, seea qualified health professional.TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:z Take frequent breaks, Get up and walk around several times every hour.z Vary your tasks throughout the day.z Keep your shoulders relaxed with your elbows at your side. Position your keyboardand mouse so you do not have to reach.z Adjust your chair and keyboard so your upper arms and wrists are straight.z Avoid resting your wrists on sharp edges.Before you beginz Keep this installation guide for future reference! It contains Important TroubleshootingInformation.z Keep your old PS/2 mouse as back-up devices.Getting StartedCongratulations on your purchase of a RF (Radio Frequency) wireless & multimediamouse. By using the advanced RF technology, there is fully 360° operation, noline-of-sight required between receiver and this mouse. The Radius Mouse doesn'thave to aim at the receiver when using.Package ContainsYour Radius Mouse package includes the following: 1. Radius Mouse 2. Receiver with cable 3. Floppy disk /or CD-ROM 4. User’s manual 5. 2 AAA batteries Note：If any part is missing, please contact your dealer for a replacement immediately.
3Precaution ! Notebook computer is not recommended. This RF wireless mouse is designed touse with desktop computer. PS2 ports of different notebooks have different data format.Some of them might not fully compatible with this RF wireless mouse. Hence, we highlyrecommend using this RF wireless mouse with desktop computer.! For optimal performance, place the receiver at least 8 inches or 20 centimeters awayfrom other electrical devices, such as the computer, the computer monitor, speakers orother external storage drives.Installation GuideStep 1. Connecting the Receiver Before using this Radius Mouse, you need to connect the included receiver to your computer first. PS/2 version If you are purchasing a PS/2 version, there is a small icon on the molding head of the cable, so you can easily recognize the mouse cable. (Refer Fig-1) PS/2 mouse cable connector Fig-1 Please follow the steps below to finish the connecting:1. Turn off your computer2. Remove the current PS/2 mouse (If you use an USB or Serial-type mouse, wesuggest you to keep it until you have verified that the wireless device is properlyconnected and working.) 3. Plug the mouse cable end into the PS/2 mouse port Step 2. Setting up the correct channel for both of receiver and mouseThis RF wireless mouse provides 2 different carriers channel and up to 256 identificationcodes to avoid interference with other radio devices or other same model RF wirelessmouse. Before you using the wireless mouse, please set the same carrier frequency and
4ID channels for both receiver and mouse.Please follow the steps as below to set up:1. Turn to the bottom of thereceiver and you will see asmall rectangular hole (takethe cover as Fig-2.1) and aslide switch (channelselection,refer to Fig-2.2).2. Remove the batteries coverby pressing the openingtabs and pull the batterycover(the top cover of themouse) out (refer the rightFig-2.3). The carrierchannel is set by a slideswitch with A or B positions. Make sure the switcheshave the same setting as the receiver (refer the right Fig-2.4, it is pre-set at factory).Step 3. Installing the BatteriesThis RF wireless mouse uses 2 AA batteries. To apply the batteries, please follow the stepsas below: 1. Turn the mouse to the bottom side2. Remove the batteries cover by moving the opening tabs and pull the battery cover(the top cover of the mouse) out (refer to the Fig-2.3).3. There are signs to indicate batteries' positive and negative poles. Follow the signs toplace the batteries4. Place the batteries cover back and make sure it is firmly closed Fig-2.1 Fig-Fig-2.3Fig-2.3Fig-2.4
5Step 4. Establish communication between the receiverand the mouse (select identification codes). Press and release the connect button on bottomof the wireless mouse (refer to Fig-3.1). Use a pen or pencil to press and release theconnect button on the receiver (refer to Fig-3.2). The "connect" light on the top dome of receiverwill flash while the same ID is selected on bothof the receiver and the mouse.Battery Warning!When replace the batteries, use alkaline. You may useother heavy-duty NiMH batteries, but do not mix then withalkaline. Do not mix used and new batteries together!Step 4.Installing the SoftwareTo install the software, please follow the steps below to finish:If the package contains a floppy disk1. Insert the floppy disk into floppy driver, then type "A:\setup" from RUN, START, Click OKor press ENTER.2. Choose the Radius Mouse Wireless Scroll3. The setup program will guide you to finish the installation step by stepIf the package contains a CD-ROM1. Insert the Auto-Run CD-ROM onto CD-ROM driver, the installation menu will be executed automatically. (If not, Type "D:\autorun" (or "E:\autorun"…) from RUN, START, Click OK or press ENTER)2. Choose the Radius Mouse Wireless Scroll3. The setup program will guide you to finish the installation step by step After you finish the installation, select "Restart"to reboot your system andactive multimedia hot keys and wheel scrollingfunctions.Fig-3.2Fig-3.1
6OperationUsing the Multimedia FunctionsWhen you install the included software driver, the left, middle, and side(second, third, and fourth) buttons are all definable to perform 34 functionslike : AutoScroll, Backspace, Zoom, Page up, Page down…. F1 …F12Power saving mode and wake upWhile this mouse has not been operated for 2 minutes, it will turn into powersaving mode. Please move this mouse more than 0.3 second or double click any keyswitch to wake up the mouse (to stop the power saving mode). GENERAL SPECIFICATIONS z Digital Radio Frequency wireless mouse with receiverz 2 channels and 256 ID selections for your options to prevent interruption.z 4 buttons design for multimedia purpose to immediately playz video/audio sources or get into Internet with a single clickz The Second, Third and Fourth buttons assignmentz Ergonomic design for comfortable grip Electromagnetic Characteristics (EMC) FCC ID:NIYMW1053 This unit complies with Part 15 of FCC Rules.Operation is subject to following two conditions:(1)(1)(1)(1) This device may not cause harmful interference.(2)(2)(2)(2) This device must accept any interference received, includinginterference that may cause undesired operation. z CE - Type acceptance: ETS 300 220 Short range devicesz Transmitterz Distance: less than 6 feet (2 meters)z Power: 3V DC (2 AAA batteries)z Carrier Frequency: 27 MHZTested To Comply WithFCC Standards
7z Dimensions: 120*65*35 mmz Weight: 900 gramsz Receiverz Interface: PS2 or USB or USB + PS/2z Power: 5V DC, 100mA MAX connected to host computerz Dimensions: 85*85*33 mmz Weight: 140 grams ELECTRIC SPECIFICATIONSz Operating Voltage: Transmitter: 1.8 to 3.2V DC (powered by batteries) Receiver: 4.5 to 5.5V DC (powered by PS/2 port)z Operating Current: Transmitter: 11mA Receiver: 30mA typicalz Standby Current: Transmitter: 0.2mA or lowerz FSK transmission, 4K transmission rate with one way error detectionTroubleshooting1. Mouse does not function If mouse is not functional, please turn off the computer first. Check the cable is firmly attached to the computer mouse port. Check the channel selection of both receiver and mouse are the same. Check if the batteries are properly connecting.The "+" and "-" on the batteries must match the "+" and "-" on the slots. If the batteriesaren't inserted correctly, the device won't work. Restart the computer again. If you used another brand of mouse, did you uninstall the software for those devices?For more information, refer to the other device's documentation or the originaldocumentation that came with your computer.2. Reducing Interference with Other Wireless DevicesAll 27MHz radio-based devices are subject to interference from other 27MHz radio-based devices, such as cordless telephones, cordless baby monitors, and cordless toys.It may help to move the receiver unit and the base unit for the other wireless device
8(such as cordless telephone cradle) as far apart as possible. You may need toexperiment to determine the locations that are best for your environment.3. Interference with other RF wireless mouse Please switch the channel to a different carrier. To do so, you need to adjust both receiver and mouse to the new channel (A or B). To reset the channel, please see “Step2, Setting up the correct channel for both of receiver and mouse” of the installation guide.Remember to establish communication between the receiver and the mouse by resetidentification codes. Normally, the effective transmit distance is about 4 to 6 feet, depending on theenvironment. If the effective distance between the mouse and the receiver is bad, try to change the location of the receiver.4. If you have difficulty connecting the wireless mouse: Increase the distance between the set of wireless mouse and other radio device units. Turn off the other wireless devices, or their base units, that are in close proximity to thereceiver of this wireless mouse. Try connecting the wireless mouse and its receiver again. To verify that your device is connected and working properly, open a document and trythe device.For additional suggestions, read the FCC Compliance Statement on the follow page.

Navigation menu