Dexin MWL61-P Cordless Laser Mouse User Manual AMW14US

Dexin Corp Cordless Laser Mouse AMW14US

Manual

BRUSSELS HANNOVER BARCELONA TOKYO MILAN AMSTERDAM SINGAPORE LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEYWireless Laser MouseUSER’S GUIDEMaking Your Mobile Life Easier.®Making Your Mobile Life Easier.®Visit our Web site at: www.targus.comFeatures and specifications are subject to change without notice.© 2005 Targus Group International, Inc. and Targus Inc.AMW14US/400-0283-001A
2TARGUS WIRELESS LASER MOUSEIntroductionCongratulations on your purchase of the Targus WirelessLaser Mouse for the desktop. This ergonomically-designedmouse offers the latest in laser tracking technology as wellas the most up-to-date wireless features. It allows forimproved tracking accuracy on most types of surfaces, evensome mirror and glass. With 6 channels and 256 IDs perchannel, the mouse's digital signal processor offers a newlevel of accuracy and precision in wireless datatransmission. Productivity is enhanced by a practical 8-button design that includes such short cuts as Internet backand forward, applications switch and scroll up and downfunctions.Note: While the mouse is functioning, no laser light isvisible to the naked eye. Be careful not to lookdirectly into the emitter hole while the mouse isactive.Package Contents• Wireless Laser Mouse• USB Receiver• USB Charge Cable•USB Extension Seat• 2 x AA Rechargeable Batteries•User GuideAMW14US.fm Page 2 Tuesday, August 16, 2005 3:22 PM10
3Targus Wireless Laser MouseSystem RequirementsHardware• USB interfaceOperating System•Windows® 2000/XPFor Desktop PCsFor instances where the PC is positioned under a desk orother places that might impede wireless connectivity, use ofthe extension seat is recommended.1 Connect the extension seat to an available USB port onyour PC. 2 Plug the USB wireless receiver into the port labeled'receiver' located at the top of the seat. 3 Connect the USB end of the charge cable to the USBport labeled 'charger' on the extension seat.For Notebook PCs1 Connect the extension seat to an available USB port onyour PC. 2 Plug the USB wireless receiver into the port labeled'receiver' located at the top of the seat. 3 Connect the charge cable's USB end to the USB portlabeled 'charger' on the extension seat. AMW14US.fm Page 3 Tuesday, August 16, 2005 3:22 PM
4Targus Wireless Laser MouseAlternatively, if more than one USB port is available you mayopt not to use the extension seat by plugging the receiverand charging cable directly into the notebook PC's openUSB ports. Installing the Batteries1 Remove the battery cover from the bottom of the mouseby pressing the tab located on the bottom and lifting itoff.Bottom of mouse2 2 AA NiMH rechargeable batteries are included. Insertthe supplied batteries, making sure that the positive (+)and negative (-) ends of each battery match the polarityindicators inside the battery housing. WARNINGS: Use ONLY heavy-duty NiMHrecharegeable batteries. Never use alkaline batteries.Avoid mixing new and used batteries.3 Slide the battery cover back into position until it “clicks”firmly into place.tabBattery coverAMW14US.fm Page 4 Tuesday, August 16, 2005 3:22 PM
5Targus Wireless Laser MouseCharging the MouseFor best results, you should charge the mouse at least eighthours before using it. 1 Connect the supplied charge cable to the charge porton the supplied extension seat and plug the extensionseat cable to the USB port on your computer.2 Connect the other end of the charge cable to themouse.3 Alternatively, you can connect the charge cable's USBconnector directly into an available USB port on yourcomputer.NOTE: To continuously charge the mouse via the USBcharge cable, your computer must be on and awake.For best results, turn off your computer’s powermanagement feature while charging the mouse.SynchronizationMake sure that your computer is turned on and hasdetected the USB receiver before you synchronize.1 Press and release the connect button on the receiver.ConnectbuttonAMW14US.fm Page 5 Tuesday, August 16, 2005 3:22 PM
6Targus Wireless Laser Mouse2 Press and release the connect button located on thebottom of the mouse.The receiver’s status light flashes while it scans theidentification codes. When synchronized the status lightstops flashing. This process must be completed within afew seconds or the steps will need to be repeated.After successfully synchronizing, you are ready to use themouse.NOTE: Removing the batteries will require you tosynchronize the mouse with the receiver again.ConnectbuttonLaseremitterAMW14US.fm Page 6 Tuesday, August 16, 2005 3:22 PM
7Targus Wireless Laser MouseUsing the MouseNOTES: The 4th through 8th buttons require Windows2000 or XP to function.Due to the improved tracking speed of the laserengine, users may find the cursor movement isfaster than a conventional optical mouse. Cursorsettings can be changed from the Control Panelin Windows.1: Left Mouse Button 5: Application Switch2: Right Mouse Button 6: Internet Page Backward3: Middle Button/Scrolling Wheel 7: Scroll Up4: Internet Page Forward 8: Scroll Down45678321AMW14US.fm Page 7 Tuesday, August 16, 2005 3:22 PM
8Targus Wireless Laser MouseSafety Measures• Although this mouse is a Class 1 Laser Product and safefor operation, avoid pointing the laser into the eyes orlooking directly into the laser emitter.• Keep the mouse away from young children.• Any attempt to disassemble, adjust or repair the mousemay result in exposure to laser light or other safetyhazards. Sleep ModeThe mouse's sleep mode feature activates after 8 minutesof non-operation. To wake the mouse, click the left, right orscroll mouse button.TroubleshootingWhat do I do if the mouse does not work?• Make sure that the polarity of the batteries is correct. Thepositive (+) and negative (-) ends of each battery mustmatch the positive (+) and negative (-) connections in thebattery housing.• Make sure that the batteries are fully charged. Check yourcomputer’s suspend mode settings, as the mouse will notcharge while the computer is in suspend mode. • Check that the receiver's USB connector is firmlyattached to the USB port on your computer or theAMW14US.fm Page 8 Tuesday, August 16, 2005 3:22 PM
9Targus Wireless Laser Mouseextension seat, or that the extensions seat's cable isconnected to your PC.• Make sure you have established a wireless link betweenthe mouse and its receiver. See “Synchronization” onpage 5.I do not see the laser light when the mouse is active.• Unlike traditional optical mice, the light is not visible whenthe laser mouse is active.• To make sure the mouse is on and functioning properly,move the mouse back and forth and check to see if thecursor responds. My mouse does not work on a mirror or glass sur-face.• Though rated for most of these kinds of surfaces,occasionally there will be one such surface that will causethe mouse to work improperly or not at all.• If you are using the mouse on a reflective or mirroredsurface, move it to another surface.What do I do if the response time of the mouse isslow or the mouse intermittently stops working?• "Increase the distance between the mouse's receiver andthe rest of your computer equipment. Use the USBextension seat if necessary.• "Increase the distance between the mouse's receiver andthe base units of other wireless devices.• "Turn off any wireless devices and their base units thatare near the mouse's receiver.AMW14US.fm Page 9 Tuesday, August 16, 2005 3:22 PM
10Targus Wireless Laser Mouse• Metals, such as iron, aluminum or copper may slow downthe mouse's response time or cause the mouse to failtemporarily.• If you are using the mouse on a metal surface, move it andthe receiver to a non-metal surface.Technical SupportFor technical questions, please visit:USInternet: www.targus.com/support.aspAustraliaInternet: www.targus.com.auEmail: infoaust@targus.comTelephone: 1800-641-645New ZealandTelephone: 0800-633-222Product RegistrationTargus recommends that you register your Targus accessory shortlyafter purchasing it. To register your Targus accessory, go to:http://www.targus.com/registration.aspYou will need to provide your full name, email address, phonenumber, and company information (if applicable).AMW14US.fm Page 10 Tuesday, August 16, 2005 3:22 PM
11Targus Wireless Laser MouseWarrantyTargus warrants this product to be free from defects in materials andworkmanship for one year. If your Targus accessory is found to bedefective within that time, we will promptly repair or replace it. Thiswarranty does not cover accidental damage, wear and tear, orconsequential or incidental loss. Under no conditions is Targus liablefor loss of, or damage to a computer; nor loss of, or damage to,programs, records, or data; nor any consequential or incidentaldamages, even if Targus has been informed of their possibility. Thiswarranty does not affect your statutory rights.Regulatory ComplianceThis device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) This device must accept anyinterference received, including interference that may causeundesired operation.FCC StatementTested to ComplyThis equipment has been tested and found to comply with the limitsof a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna;• Increase the separation between the equipment and receiver;AMW14US.fm Page 11 Tuesday, August 16, 2005 3:22 PM
12Targus Wireless Laser Mouse• Move the computer away from the receiver;• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Intel and Pentium are registered trademarks of Intel Corporation. Windows is a registeredtrademark of Microsoft Corporation. All other trademarks are the property of their respectiveowners. © 2005, Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA.AMW14US.fm Page 12 Tuesday, August 16, 2005 3:22 PMFCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu