Dexin MWP0926 Wireless Optical Mouse User Manual Revised 041202

Download:
Mirror Download [FCC.gov]
Document ID	236571
Application ID	yMJ++0ISKpmgSC6lDMpGBw==
Document Description	Users Manual Revised 041202
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.23kB (90345 bits)
Date Submitted	2002-04-12 00:00:00
Date Available	2002-04-10 00:00:00
Creation Date	2002-03-26 17:04:19
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2002-04-12 12:04:59
Document Title	R:\Customer document\寶德Dexin\910313R02\user's manual.prn.pdf
Document Creator	Microsoft Word - DC-1093 MANUAL
Document Author:	Jane

RF WIRELESS SCROLL MOUSE
USER’S MANUAL
Model #: MWP0926
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious injury to hands,
wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see
a qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
Take frequent breaks, Get up and walk around several times every hour.
Vary your tasks throughout the day.
Keep your shoulders relaxed with your elbows at your side. Position your keyboard
and mouse so you do not have to reach.
Adjust your chair and keyboard so your upper arms and wrists are straight.
Avoid resting your wrists on sharp edges.
System Requirement
l Mouse compatible with standard Microsoft mode
l 3rd button and wheel function require Win98/2000/Me/XP
Before you begin
l Keep this installation guide for future reference! It contains Important Troubleshooting
Information.
l Keep your old PS/2 mouse as back-up devices.
Getting Started
Congratulations on your purchase of a RF (Radio Frequency) wireless & multimedia
mouse. By using the advanced RF technology, there is fully 360°operation, no
line-of-sight required between receiver and this mouse. The DC-1093 Mouse doesn't
have to aim at the receiver when using.
Package Contains
Your MWP0926 Mouse package includes the following:
1. MWP0926 Mouse (Transmitter)
2. RX1087 Mini Receiver
3. User’s manual
4. 2 AA batteries
Note：If any part is missing, please contact your dealer for a replacement
immediately.
Precaution
! For optimal performance, place the receiver at least 8 inches or 20 centimeters away
from other electrical devices, such as the computer, the computer monitor, speakers or
other external storage drives.
! For normal transmit distance, avoid to use this device on a metal plate or desktop
because a large surface of iron, aluminum, copper and other metal will be a shielding or
ground to the RF antenna of the mouse and receiver. Operating on a metal may cause the
transmit distance shorter,
! For this RF optical mouse, it is not suggested operate the mouse on a dark surface
for the consideration of saving battery power. so, the LED is not illuminated too bright,
Although the working surface is not strictly restricted, it is strongly recommended to operate
an optical mouse on a white paper to obtain the best performance.
! If your notebook computer has a metal( contains Al or Mg) case, the LCD panel’s
metal housing will isolate partial power of the RF signal from the mouse. This will result in
reducing the distance of transmit when you connect the receiver on the back of LCD panel.
However, the RF mouse should work properly while you are operating the mouse just
beside your notebook computer.
Installation Guide
Step 1. Connecting the Receiver
Before using this MWP0926 Mouse, you need to connect the included receiver to
your computer first.
Please follow the steps below to finish the connecting:
1. Turn off your computer
2. Keep a USB slot of your notebook free for the receiver
3. Plug the USB connector end into the USB port
4. Prepare your original Microsoft Windows CD
5. Turn the notebook power on and then follow the instructions of Windows
message for the new USB device connection
Step 2. Setting up the correct channel for both of receiver and mouse
This RF wireless mouse provides 2 different carriers channel and up to 256 identification
codes to avoid interference with other radio devices or other same model RF wireless
mouse. Before you using the wireless mouse, please set the same carrier frequency and
ID channels for both receiver and mouse.
Please follow the steps as below to set up:
1. Check the end of receiver opposite to the USB
connector and you will see a small rectangular tact switch.
2. Installing the Batteries
This RF wireless mouse uses 2 AA batteries.
To apply the batteries, please follow the steps as below:
Fig-3.1
Turn the mouse to the bottom side and remove the batteries cover by moving the
opening tab and pull the battery cover (the top cover of the mouse) out
There are signs to indicate the polarity of the batteries. Follow the signs to place
the batteries
Place the batteries cover back and make sure it is firmly closed
Battery Warning!
When replace the batteries, use alkaline. You may use other
heavy-duty NiMH batteries, but do not mix them with alkaline.
Do not mix used and new batteries together!
4. Establish communication between the receiver and the mouse
(select identification codes).
Press and release the connect button on bottom
of the wireless mouse (refer to Fig-3.1).
Press and release the connect button
on the receiver (refer to Fig-3.2).
The "connect" light on the top cover of receiver
will flash while the same ID is selected on both
of the receiver and the mouse.
Fig-3.2
GENERAL SPECIFICATIONS
Digital Radio Frequency wireless mouse with receiver
2 channels and 256 ID selections for your options to prevent interruption.
3 buttons design for multimedia purpose to immediately play
Ergonomic design for comfortable grip
Electromagnetic Characteristics (EMC)
FCC ID: NIYMWP0926
This unit complies with Part 15 of FCC Rules.
Operation is subject to following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Tested To Comply
With FCC Standards
l CE - Type acceptance: ETS 300 220 Short range devices
Transmitter
Distance: less than 4 feet (1.2 meters)
Power: 3V DC (2 AA batteries)
Carrier Frequency: 27 MHz
Dimensions: 98*59*38 mm
Weight: 106 grams
Receiver
Interface: USB
Power: 5V DC, 100mA MAX connected to host computer
Dimensions: 63*22*17 mm( the USB metal connector is not included)
Weight: 16 grams
ELECTRIC SPECIFICATIONS
l Operating Voltage: Transmitter: 3.0V DC (powered by batteries)
Receiver: 4.5 to 5.5V DC (powered by USB port)
l Operating Current:
Transmitter: 35~45(Max)mA
Receiver: 30mA typical
l Standby Current:
Transmitter: 10mA or lower
l Sleep Mode Current: Transmitter: below 5uA
l FSK transmission, 4K transmission rate with one way error detection
Troubleshooting
1. Mouse does not function
n If mouse is not functional, please turn off the computer first.
n Check the cable is firmly attached to the computer mouse port.
n Check the channel selection of both receiver and mouse are the same.
n Check if the batteries are properly connecting.
The "+" and "-" on the batteries must match the "+" and "-" on the slots. If the batteries
aren't inserted correctly, the device won't work.
Restart the computer again.
2. Reducing Interference with Other Wireless Devices
All 27MHz radio-based devices are subject to interference from other 27MHz radiobased devices, such as cordless telephones, cordless baby monitors, and cordless toys.
It may help to move the receiver unit and the base unit for the other wireless device
(such as cordless telephone cradle) as far apart as possible. You may need to
experiment to determine the locations that are best for your environment.
Avoid to use this device on a metal surface because a large surface of iron, aluminum,
copper and other metal will be a shielding or ground to the RF antenna of the mouse and
receiver.
3. Interference with other RF wireless mouse
Please switch the channel to a different carrier. To do so, you need to adjust both
receiver and mouse to the other channel. channel switching is done by internal micro
controller, please see “Step 2, Setting up the correct channel for both of receiver and
mouse” of the installation guide. To switch channel on both mouse and receiver A new
identification code is generated upon the completion of channel switching.
Normally, the effective transmit distance is about 3 feet, depending on the environment. If
the effective distance between the mouse and the receiver is bad, try to
change the location of the receiver.
4. If you have difficulty connecting the wireless mouse:
Increase the distance between the set of wireless mouse and other radio device units.
Turn off the other wireless devices, or their base units, that are in close proximity to the
receiver of this wireless mouse.
Try connecting the wireless mouse and its receiver again.
To verify that your device is connected and working properly, open a document and try
the device.
For additional suggestions, read the FCC Compliance Statement on the follow page.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Information to User - The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications not
expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Creator                         : Microsoft Word - DC-1093 MANUAL
Create Date                     : 2002:03:26 17:04:19
Title                           : R:\Customer document\寶德Dexin\910313R02\user's manual.prn.pdf
Author                          : Jane
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Modify Date                     : 2002:04:12 12:04:59+08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools