Dexin MWP5016 Wireless Optical Mouse User Manual Revised 041102

Dexin Corp Wireless Optical Mouse Users Manual Revised 041102

Users Manual Revised 041102

1 STANDARD RF OPTICAL MOUSEUSER’S MANUALModel #: MWP5016
2Important Ergonomic InformationSome experts believe that using any mouse or trackball may cause serious injury to hands,wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, seea qualified health professional.TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:l Take frequent breaks, Get up and walk around several times every hour.l Vary your tasks throughout the day.l Keep your shoulders relaxed with your elbows at your side. Position your keyboardand mouse so you do not have to reach.l Adjust your chair and keyboard so your upper arms and wrists are straight.l Avoid resting your wrists on sharp edges.System Requirementl Mouse compatible with standard Microsoft model 3rd button and wheel function require Win98/2000/Me/XPl If without driver installed: 4th & 5th button require Win2000/XP if without driver installed.Before you beginl Keep this installation guide for future reference! It contains Important TroubleshootingInformation.l Keep your old PS/2 mouse as a back-up device.Getting StartedCongratulations on your purchase of an RF (Radio Frequency) wireless & multimediamouse. By using the advanced RF technology, a 360°of operation is possible, and noline-of-sight is required between the receiver and the mouse. The MWP5016 Mouse doesn'thave to aim at the receiver when using.Package ContainsYour DC1095 Mouse package includes the following: 1. MWP5016 Mouse (Transmitter) 2. RX1085-2 Mini Receiver 3. User’s manual4. One AA size of lithium ion rechargeable battery5. Charge base for RF Mouse.6. CD-ROM Driver Windows 95/98/2000/NT/ME/XP Note：If any part is missing, please contact your dealer for a replacement immediately.
3Precaution! For optimal performance, place the receiver at least 8 inches or 20 centimeters awayfrom other electrical devices, such as the computer, the computer monitor, speakers orother external storage drives.! For a better transmission distance, avoid using this device on a metal plate ordesktop because a large surface of iron, aluminum, copper and other metal will be ashielding or ground to the RF antenna of the mouse and receiver. Operating on a metalmay cause the transmission distance shorter.! For this RF optical mouse, it is not suggested operate the mouse on a dark surfacefor the consideration of saving battery power, so the LED is not illuminated too bright.Although the working surface is not strictly restricted, it is strongly recommended to operatean optical mouse on a white paper to obtain the best performance.! If your notebook computer or PC has a metal (contains Al or Mg) case, the metalhousing of the LCD panel will isolate partial radiation of the RF signal from the mouse. Thiswill possibly result in reducing the distance of transmission when you operate the mouseright in front of the notebook or PC, and the receiver is connected on the back of thenotebook or PC. However, the RF mouse should work properly while you are operatingthe mouse just beside your notebook computer or PCInstallation GuideStep 1. Connecting the ReceiverBy using this MWP5016 mouse, you need to keep a free USB port for the includedreceiver.Please follow the steps below to finish the connecting:1. Turn off your computer.2. Plug the USB connector end of the receiver into the USB port. Of your notebook( or PC) or your charge base if the charge base is already connected to yournotebook or PC through the USB cable.3. Prepare your original Microsoft Windows CD.4. Turn the notebook or PC power on, then follow the instructions of Windows tocomplete the registration of a new USB device. Step 2. Setting up the correct channel for both of receiver and mouseThis RF wireless mouse provides 2 different RF channels, and 256 identification codes toavoid interference with other radio devices or other same model of RF wireless mouse.Before you using the wireless mouse, please select the same RF channel (indicated by Aand B) by sliding the switch to A or B on both receiver and mouse. (See Fig. 3.1 and 3.2 forthe location of channel switch.)
4Step 3. Connecting the power1. Connect the AC plug of power adaptor into AC power outlet.2. Connect the DC output connector of the adaptor into the female DC jack on theback of charger.3. Then the red LED will be lighten on.Step 4. Full charge the batteries1. Put the wireless optical mouse with its rechargeable batteries on the correctlocation of the charger.2. Before you use the wireless optical mouse, you have to charge the batteries asfull as possible. It will take about 3 to 4 hours to full charge the lithium-ionbatteries inside the mouse.3. During charging the lithium-ion battery, the lefts green LED on the charger basewill be lighten on. When the battery is full charged, the green LED will be turnedoff.Please follow the procedures to set up:1. Installing the BatteriesTo apply the battery, please follow the following steps: n Turn the mouse to the bottom side and remove the battery cover by moving theopening tab and pull the battery cover out.n There are signs to indicate the polarity of the battery. Follow the signs to placethe battery.n Place the battery cover back and make sure it is firmly closed.Battery Warning!Be sure to use the included lithium battery.Do not use a standard AA battery, which does not have an enough voltage level to triggerthe internal circuitry.2. Establishing communication between the receiver and the mousen First, make sure that channel switches on the mouse and the receiver are placedat the same channel, i.e., channel A or channel B.n Press and release the connect button, or ID SW, on bottom of the wireless mouse(refer to Fig-3.1).n Press and release the connected button, or ID SW, on the receiver (refer to Fig-3.2). Note: The location of the ID switch may vary according to different model ofreceiver.n The "connect" light on the top cover of receiver will flash while the same ID isselected on both of the receiver and the mouse.
5 Channel switch (Inside the battery cover)GENERAL SPECIFICATIONSl Digital Radio Frequency wireless mouse with receiverl 2 channels and 256 ID selections for your options to prevent interruptionl 5 buttons design for multimedia purpose to immediately playl Ergonomic design for comfortable gripElectromagnetic Characteristics (EMC) FCC ID: This unit complies with Part 15 of FCC Rules.Operation is subject to following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, includinginterference that may cause undesired operation. l CE - Type acceptance: ETS 300 220 short range devices 0560 TransmitterTested To ComplyWith FCC StandardsFig-3.1 Fig-3.2ID switchChannel switchID switch
6l Distance: 3 feet typicall Power: 3.7V DC (Lithium ion battery)l Carrier Frequency: 27 MHzl Dimensions: 98*59*38 mml Weight: 106 gramsReceiverl Interface: USBl Power: 5V DC, 100mA MAX connected to host computerl Dimensions: 63*22*17 mm (without counting the extended USB connector)l Weight: 16 gramsRechargerl Charging Current: 70 mA typicall Power : 5V DC 450 mAl Dimensions: 112 * 87 * 54 mml Weight: 110 gELECTRIC SPECIFICATIONSl Operating Voltage: Transmitter: 3.7V DC (powered by batteries) Receiver: 4.5 to 5.5V DC (powered by USB port)l Operating Current: Transmitter: 45~55mA Receiver: 30mA typicall Standby Current: Transmitter: 10mA or lowerl Sleep Mode Current: Transmitter: below 10uAl Modulation Type: FSKl Transmission Rate: 4K bpsl Error Detection: 8-bit CRCTroubleshooting
71. Mouse does not functionn If mouse is not functional, please turn off the computer first.n Check the receiver and make sure it is firmly attached to the USB port of the computer.n Check the placement of the battery and see if it is properly connecting.The "+" and "-" ends of the battery must match the "+" and "-" on the slots. If thebattery is not inserted correctly, the device won't work.n Restart the computer again.2. Reducing Interference with Other Wireless DevicesAll 27MHz radio-based devices are subject to interference from other 27MHz radio-based devices, such as cordless telephones, cordless baby monitors, and cordless toys.It may help to move the receiver unit and the base unit for the other wireless device(such as cordless telephone cradle) as far apart as possible. In order to have bestperformance, you may need to experiment and find a location best for your receiver.Avoid to use this device on a metal surface because a large surface of iron, aluminum,copper, or other metal may act like a shielding to the RF antenna of the mouse and thereceiver.3. Interference with other RF wireless mouse Please switch the channel to the other one. To do so, you need to slide the channelswitch on both the receiver and the mouse to the other side. A new identification codemay require if there happens a cross reception of RF signal from other same model ofRF mouse. Please see Step 2 of the Installation Guide on “Establishing communicationbetween the receiver and the mouse” to generate a new ID code. Normally, the effective transmission distance is about 4.5 feet, depending on theenvironment. If the effective distance between the mouse and the receiver is bad, try to change the location of the receiver.4. If you have difficulty connecting the wireless mouse:n Increase the distance between the set of wireless mouse and other radio device units.n Turn off the other wireless devices, or their base units, which are in the proximity of thereceiver.n Try connecting the wireless mouse and its receiver again.n To verify that your device is connected and working properly, open a document and trythe device.
Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.8Information to User - The users manual or instruction manual for an intentionalor unintentional radiator shall caution the user that changes or modifications notexpressly approved by the party responsible for compliance could void theuser's authority to operate the equipment.

Navigation menu