Dexin RFWP0102 RF Wireless Mouse User Manual Manual

Dexin Corp RF Wireless Mouse Manual

manual

RF Wireless Mouse User’s ManualRF WIRELESS MOUSEUSER’S MANUALModel No. RFWP0102DEXIN Corporation.20F-2. No. 37, Sec. 2, San-Ming Rd., Pan-Chiao City, Taipei Hsien, Taiwan, R.O.C.TEL: +886-2-3234-7193FAX: +886-2-3234-7195
RF Wireless Mouse User’s ManualTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION ISSUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.Federal Communications Commission RequirementsThe equipment has been tested and found to comply with the limits for Class B DigitalDevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may cause harmful interferenceto radio communication. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:l Reorient of relocate the receiving antenna.l Increase the separation between the equipment and receiver.l Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.l Consult the dealer or an experienced radio/TV technician for help.The changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
RF Wireless Mouse User’s ManualGetting Start(Please refer Fig.1 on Quick Installation)Welcome to purchase this Radio Frequency (RF) wireless multimedia mouse. Byusing the advanced RF technology, there is no line-of-sight required between receiverand this mouse. The mouse doesn't have to aim at the receiver when using. Whenyou unfold the package, it should contains:1. Mouse2. Receiver3. Driver Diskettes4. User’s ManualIf any part is missing, please contact your dealer for a replacement immediately.Connecting the Receiver(Please refer Fig.3 on Quick Installation)Before using this RF wireless mouse, you need to connect the included receiver toyour computer first.PS/2 versionIf you are purchasing a PS/2 version, please follow the steps to finish the connecting:PS/2 mouse cable connector1. Turn off your computer2. Remove the current mouse3. Plug the mouse cable end into the PS/2 mouse port4. Restart the computer and the mouse will be automatically detected byWindows95, 98, or NTUSB versionIf you are purchase a USB version RF multimedia mouse, just simply plug the USBconnector into a type-A USB connector. USB version is hot-pluggable. Hence it is notnecessary to turn off your computer to connect the receiver to your computer.USB connector
RF Wireless Mouse User’s ManualInstalling the Batteries(Please refer Fig.4-1, Fig.4-2 and Fig.5 on Quick Installation)This RF wireless mouse uses 2 AAA batteries. To apply the batteries, please followthe steps:1. Turn the mouse to the bottom side2. Remove the batteries cover by pressing the opening tabs with thumb and pull thebattery cover(the top cover of the mouse) out3. There are signs to indicate batteries' positive and negative poles. Follow the signsto insert the batteries4. Place the batteries cover back and make sure it is firmly closedSetting up the ID Channels(Please refer Fig.4-3 and 4-4 on Quick Installation)This RF wireless mouse provides 64 different ID channels to avoid interference withother radio devices or other same model RF wireless mouses. Before you using thewireless mouse, please set the same ID channels for receiver and mouse. Pleasefollow the steps to set up:1. Adjust the ID channel of the receiver: Turn to the bottom of the receiver andyou will see a DIP switch. Make sure the ID channel is different from otherwireless mouses. The channel is set up by 6 switches with ON or OFF position.2. Adjust the ID channel of the mouse: Remove the battery cover and batteries.You will see a DIP switch. Adjust the position to the same as the receiver.Setting up the RF wireless mouseOnce you connect the receiver to your computer and install the batteries to the mouse,you can start to use the RF wireless mouse. Since the mouse is using RF wirelesstechnology, it doesn't matter where you put the receiver. Even it is put behind thecomputer. When using the mouse, it's not necessary to aim at the receiver. Themaximum effective distance between the mouse and the receiver is 30 feet (10meters) depending on the situation of surrounding interference.The RF wireless mouse is full compatible with Windows95, 98, and NT. Plug themouse to the appropriate interface port before you start the computer, and the mousewill function when the computer starts up. The mouse will be detected as a standard
RF Wireless Mouse User’s ManualPS/2 or USB mouse. The right and left buttons are functional without any specialdriver. To utilized the middle and side (third and fourth) buttons, you need to install theincluded multimedia driver.Installing the Software(Please refer Fig.7 and Fig.8 on Quick Installation)To install the software, please follow the steps below to finish:1. Insert the disk onto floppy driver2. Type "A:\setup" (or "B:\setup") from RUN, START3. Click OK or press ENTER4. The setup program will guide you to finish the installation step by stepAfter you finish the installation, select "Restart" to reboot your system and activemultimedia hot keys and wheel scrolling functions.Using the Multimedia FunctionsWhen you install the included software driver the left, middle, and side (second, third,and fourth) buttons are all definable to perform the following functions:Ÿ World Wide Web (programmable 1): Get on default Internet browser directlyŸ E-mail Application (programmable 2): Open default e-mail applicationŸ Next Page (programmable 4): Go to the next page of InternetŸ Previous Page (programmable 5): Back to the previous page of InternetŸ Play / Pause: Press this button once to play CD/VCD, press again to pauseplayingŸ Rewind: Back to the previous CD trackŸ Forward: Go to the next CD trackŸ Application: Launch assigned programŸ StartŸ RunŸ Double ClickŸ Find documentŸ Find computerŸ Explore my computerŸ Control PanelŸ Task ListŸ Main Window HelpŸ Maximum Window
RF Wireless Mouse User’s ManualŸ Minimum WindowŸ Minimum all WindowsŸ Close WindowŸ CopyŸ CutŸ PasteŸ UndoŸ AutoScroll: click the middle button and move mouse to scroll pageŸ Datazoom: hold down the [CTRL] key and the middle button. Move themouse upward to increase the view of a document, move the mousedownward to decrease the view of a document. Only work for Office97Ÿ Zooming Lens: to magnify a specific areaŸ Wheel (only available on wheel model)Ÿ Office 97 WheelŸ WheelScrollŸ Wheel Datazoom (only available on wheel model): for InternetExplorer 4.0 and up, press [SHIFT] and roll the wheel to performforward or backward, for Office97, press [CTRL] and roll the wheelto magnify and demagnify the view of documentŸ Multimedia WheelŸ VolumeWheel: Press [CTRL] and roll the wheel to increase ordecrease the volume of soundŸ Press [SHIFT] and roll the wheel to perform horizontal scrollŸ [Backspace]Ÿ [Delete]Ÿ [Esc]Ÿ [Enter]Ÿ [PageUp]Ÿ [PageDown]Power saving mode and wake upWhile this mouse has not been operated for 5 minutes, it will turn into power savingmode. Please move this mouse more than 0.3 second or double click any key switchto wake up the mouse (to stop the power saving mode).Troubleshooting
RF Wireless Mouse User’s Manual1. Interference with other radio devicesPlease try to keep the mouse and the receiver away from other radio devices at least5 inches (12.5cm) to avoid interference.2. Interference with other RF wireless mousePlease switch the channel to a different ID. To do so, you need to adjust both receiverand mouse to the new channel ID. To adjust the channel ID of the receiver, turn to thebottom of the receiver and select a different channel ID from other RF wireless mouse.To adjust the channel ID of the mouse, remove the batteries cover and batteries. Youwill see the ID switcher. Select the channel ID to the same ID of the receiver.If the effective distance between the mouse and the receiver is bad, try to change thelocation of the receiver. You can use the magnetic pad on the bottom of the receiverto stick at up/left/right side of the computer case3. Mouse does not functionIf mouse is not functional, please turn off the computer first.Ÿ Check the cable is firmly attached to the computer mouse port.Ÿ Check the channel IDs of both receiver and mouse are the same.Ÿ Check if the batteries are properly connecting.Ÿ Restart the computer again. If the mouse is still not functional, please contactyour dealer immediately.Warning This RF wireless mouse is designed to use with desktop computer. PS2 ports ofdifferent notebooks have different data formats. Some of them might not be fullycompatible with this RF wireless mouse. Hence, we highly recommend to use this RFwireless mouse with desktop computer.

Navigation menu