Diablo Wrath Users Manual

: Diablo Diablo-Wrath-Users-Manual-804470 diablo-wrath-users-manual-804470 diablo pdf

Open the PDF directly: View PDF .
Page Count: 13

Download
Open PDF In Browser	View PDF

Cover.qxd

1/10/05

10:30 AM

Page 2

user manual

diablopaintball.com

Cover.qxd

1/10/05

10:30 AM

Page 3

Table Of Contents:

Page
1
2
3
4

5

6

7

8
9
11

Topic(s)
Warning and Rules
Safe Marker Handling
Warranty Information
Welcome
Battery Installation
Powering On
Attaching Propellant Source
Attaching Feeder/Hopper
Loading Paintballs
Deactivating Safety
Chronographing
LCD Modes
Adjusting Firing Rates
Sensor
Counter
Timer
Auto Power
De-Gassing
Storage
Maintinence
Trouble Shooting Guide
Notes
Warranty Registration

diablopaintball.com

1-12-2-11.qxd

1/10/05

10:24 AM

Page 2

/!\ WARNING: This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for
paintball must be worn by the user and persons within range.
Recommend 18 years of age or older to purchase. Persons
under 18 years of age must have adult supervision.
READ OWNER’S MANUAL BEFORE USING.

Rules of Safe Marker Handling
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

13.

Treat every marker as if it were loaded.
Never look down the barrel of a paintball marker.
Keep your finger off the trigger until ready to shoot.
Never point the marker at anything you don’t wish to
shoot.
Keep the marker on safe until ready to shoot.
Keep the barrel blocking device in/on the marker’s muzzle when not shooting.
Always remove paintballs and propellant source before
disassembly.
After removing propellant source, point marker in safe
direction and discharge until marker is degassed.
Store the marker unloaded and de-gassed in a secure
place.
Follow warnings listed on propellant source for handling
and storage.
Do not shoot at fragile objects such as windows.
Every person within range must wear eye, face and ear
protection designed specifically to stop paintballs and
meeting ASTM standard F1776.
Always measure your marker’s velocity before playing
paintball and never shoot at velocities in excess of
91.44 meters (300 feet) per second.

Meets or exceeds ASTM standards.

1.

1-12-2-11.qxd

1/10/05

10:24 AM

Page 3

Warranty Information
STANDARD WARRANTY:
The manufacturer warranties to the original customer that this product
is free from defects in material and workmanship under normal use
and service for a period of 90 days from the original date of purchase
by the initial owner/purchaser. The manufacturer agrees to repair or
replace (at its discretion) any product within a reasonable period of
time. This warranty does not cover: o-rings, scratches, nicks, normal
wear and tear of parts, any modifications or normal fading of anodizing or damage caused by dropping or hitting of the product. This warranty shall not apply if it is shown by the manufacture that the consumer caused the defect or malfunction because of misuse. This warranty only covers original factory parts. Any modifications or tampering
of original factory parts will not be covered by this warranty. Warranty
work can only be conducted by the manufacture technicians and or
authorized technicians. If product needs to be repair, package it carefully and send it together with your name, address, phone number and
a brief description of the malfunction to:

Paintball Solutions
570 Mantua Blvd
Sewell, NJ 08080

EXTENDED WARRANTY:
By returning the enclosed warranty registration card or
registering your warranty on-line at www.paintballsolutions.com, within fifteen days of purchase, the warranty will
automatically be extended to one year.

2.

diablopaintball.com

3-10-4-9.qxd

1/10/05

10:27 AM

Page 2

welcome

...Thank you, for purchasing this Wrath Paintball
marker. The Wrath represents the culmination of a great deal of
research by Diablo Paintball along with input from players such as
you. The Wrath is designed to deliver top level performance at a
reasonable cost. With its 20 ball per second cycling rate, the
Wrath is one of the fastest markers available at any price. The
Vise Grip Feed Neck, Quik-Strip bolt, vertical foregrip regulator,
ported barrel and high speed air-ram operation are all features
usually found only on much pricier markers or only through a great
deal of after-market expense. We believe that the affordability of a
reliable, feature packed marker will improve your playing experience and winning percentage. Unleash your Wrath!
Play hard, play safe, play to win!

TM

Meets or exceeds ASTM standards.

3.

3-10-4-9.qxd

1/10/05

10:27 AM

Page 3

BATTERY INSTALLATION
1.
2.
3.
4.

Properly position barrel blocking device to prevent accidental discharge.
Using a 2.5mm hex wrench, remove the three Grip Panel Screws from the left
side (side facing you if the barrel is pointing to your left) of the Grip Panel.
Install 9 volt battery.
Replace Grip Panel Screws.

POWERING ON
1.
2.
3.
4.

Confirm that Barrel Blocking Device is properly installed.
Look at the LCD while pushing the
button and holding until the solid line
disappears and is replaced by “BD 5 with “*******” underneath.
Release On/Off switch.
The Wrath is now “On” in “Safe Mode”

ATTACHING PROPELLANT SOURCE
1.
2.
3.
4.
5.

6.

Confirm that Barrel Blocking Device is properly installed.
Confirm that the LCD says “BD 5”.
Point the marker downward and in a safe direction.
Place the leading end of the propellant cylinder threads into the threaded inter
face of the (Air Source Adapter) “ASA”.
Without pushing, twist the propellant cylinder in a clockwise direction and allow
the cylinder threads to “draw” it into the ASA. DO NOT force the cylinder which
could cause cross threading.
Screw the propellant cylinder completely in until it is firmly seated

ATTACHING FEEDER/HOPPER
Due to the extremely high rate of fire capability of the Wrath, we highly recommend the use of a motorized hopper such as the Diablo TSA, Empire Reloader,
or Empire Reloader B.
1.
2.
3.
4.
5.

4.

Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5”.
Twist Vise Ring in a counter-clockwise direction until it is loose but do not
remove. If accidentally removed, screw back on one complete turn.
Press neck of Feeder/Hopper into the Direct Feed (4) until completely seated.
Orient the Feeder/Hopper so that the lid is facing the rear of the
marker and the Feeder/Hopper is parallel to the Receiver.
Twist Vise Ring in a clockwise direction until it fits snugly against the
Feeder/Hopper neck.

diablopaintball.com

5-8-6-7.qxd

1/10/05

10:29 AM

Page 2

Loading Paintballs
The performance of your marker is directly related to the quality of paintballs
used. We highly recommend Diablo paintballs to give you the most satisfaction
and success on the playing field.
1.
2.

Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5”.
Point marker in a safe direction and load paintballs in the Feeder/Hopper. If you
are using a non-motorized hopper, be sure to leave some room in the hopper for
the balls to feed properly.

Deactivating Safety
1.
2.
3.
4.
5.

Make sure that you and anyone within range is wearing eye protection designed
specifically for paintball.
Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5”.
Look at the LCD while pushing the
button.
The screen will now read “Semi 15” on the top line with “000000” underneath. It
is possible that there will be numbers other than “0” on the bottom line. These
are shot counts.
The Wrath is now live.

Chronographing
Never operate your marker without first checking the velocity and confirming that
you are firing below that required on the field of play. At no time should the
marker fire paintballs in excess of 300 feet per second. Higher velocities are not
only potentially dangerous, they often result in a substantial increase in paint
balls broken in the marker.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Make sure that you and anyone within range is wearing eye protection designed
specifically for paintball.
Point the marker over the chronograph and in a safe direction.
Pull the trigger and observe the reading on the chronograph.
Using a 7/32 hex key adjust Vertical Regulator (VR) until pressure gauge reads
about 200 psi. You may need to fire the marker after each adjustment to allow
the gauge to adjust.
To increase the velocity, adjust the VR clockwise.
To decrease the velocity, adjust the VR counter-clockwise.
Replace the Barrel Blocking Device.
Hold down the
button until the LCD blinks “Safety”.
The Wrath is now on Safe.
Keep the Wrath on Safe and Barrel Blocking Device in place until ready to play
and instructed to remove the Barrel Blocking Device by a playing field staff
member.

Meets or exceeds ASTM standards.

5.

5-8-6-7.qxd

1/10/05

10:29 AM

Page 3

LCD Modes
The Diablo Wrath has a built in Anti-Chop Ball Sensor, Game Timer, Shot
Counter and can be adjusted from 4 to 20 shots per second firing rate.

Adjusting Firing Rate
1.
2.
3.
4.
5.

Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5”.
Press and release
button.
“Semi 15” will appear.
Press and release
button until desired rate of fire appears.
Press
button to set

Sensor
1.
2.
3.

Press
Press
Press

button until “SENSOR” appears.
button until “OFF” or “ON” blinks.
button to set Sensor “ON” or “Off”

Counter
1.
2.

Press
button until “COUNTER” appears
To reset press and hold
button until all “0s” appear.

Timer
1.
2.
3.
4.

Press
button until “TIMER” appears
To set press and
arrow button until “0s” blink.
Press
button until desired time appears (up to 99 minutes in 1 minute
increments).
Press
button when you want to start timer count down.
Turn off marker to reset.

Auto Power
1.
2.
3.

Press
press
Press

button until power appears
button until “AUTO” or “ON” blinks.
button to set power to “AUTO” or “ON”.

6.
Meets or exceeds ASTM standards.

5-8-6-7.qxd

1/10/05

10:29 AM

Page 4

De-Gassing
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Make sure that you and anyone within range is wearing eye protection designed specifically for paintball.
Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5” and Wrath is in “Safe Mode”.
Point the marker in a safe direction
If you are using a motorized feeder, turn it off.
Twist the Clamp Feed in a counter-clockwise direction until loose.
Invert the marker so that the hopper/feeder is upside down so
that paintballs are no longer feeding into the marker.
Remove the hopper/feeder from the marker.
While pointing the paintball marker in a safe direction, remove the
barrel blocking device.
Turn the Wrath on and set to fire.
Pull the trigger and allow the marker to cycle to confirm the
absence of paintballs in the marker’s breech. If a ball discharges,
repeat until no more paintballs come out of the marker.

/!\ WARNING: When removing the cylinder from the marker, it could fly off with
enough force to kill if the valve unscrews from the cylinder. LOOK at valve when
removing cylinder. STOP if valve starts to unscrew from the tank. Screw it back
on and take it to a trained person for repair.
11.
12.

13.

Unscrew the propellant cylinder approximately one complete
revolution.
Pull the trigger until the marker fails to recock (if this takes more
than 10 shots, unscrew the cylinder an additional 1/2 turn
and repeat).
Remove (See Warning Above) the propellant cylinder.

Storage
Always turn off the marker, remove the hopper/feeder, all paint balls and propel
lant source and place it in a secure location where it cannot be accessed by
unauthorized persons.

Maintenance/ Bolt
1.
2.
3.
4.
5.
6.
7.

Pull the Bolt Pull Pin upwards until it “clicks”.
Pull the Bolt Pull Pin rearward until the Bolt comes out of the back of the
Receiver.
Clean the bolt thoroughly to include rinsing in warm water if needed.
Lubricate the bolt with non-corrosive lubricant such as Empire Lube or
Empire Oil.
Return the bolt to the rear of the Receiver making sure to put the open
end in first.
Slide the bolt forward until the Bolt Pull Pin lines up with the hole in the
top of the Striker.
Press the Bolt Pull Pin downward until it clicks in place.

diablopaintball.com

7.

5-8-6-7.qxd

1/10/05

10:29 AM

Page 1

Trouble Shooting Guide
Symptom

Cause

Cure

Does not Fire

Not On

Turn Switch “On”

Bad Battery

Replace Battery

Out of Gas

Refill or Replace
Propellant Source

Bad Cup Seal

Replace Cup Seal

Leaks Air from
ASA/Bottle Interface

Bad Bottle O-Ring

Replace Bottle O-Ring

Excessive Ball
Breakage

Low Quality Paintballs Upgade Paintball Selection
(reccomendation: Diablo Brand)

Leaks Air
Down Barrel

Ball Chopping

Use Motorized Feeder
Such as Diablo TSA

When in doubt, thoroughly clean and lubricate the marker.
Many marker function problems are caused by excessive
dirt or lack of lubrication.

8.

diablopaintball.com

3-10-4-9.qxd

1/10/05

10:27 AM

Page 1

Notes On Wrath:

10.

diablopaintball.com

1-12-2-11.qxd

1/10/05

10:24 AM

Page 4

Warranty Registration
To assist us in providing the best customer service possible and to
increase your warranty from 90 days to one year at no additional cost.
Complete and mail this to:
Paintball Solutions
570 Mantua Blvd.
Sewell, NJ 08080

Name:
Address:

City:

State:

Zip:

Country:
Email Address:
Serial Number (located on left side of marker):
Date of Purchase:
Place of Purchase:

Or register online at www.PaintballSolutions.com.

Meets or exceeds ASTM standards.

11.

Cover.qxd

1/10/05

10:30 AM

Page 1

Diablo Paintball is a registered trademark of National Paintball Supply.
Diablo Paintball is ditributed exclusively through National Paintball Supply.
800. 346. 5615 / 856. 464. 1068
www.diablopaintball.com / www.nationalpaintball.com
© 2005 National Paintball Supply



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 13
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f9ed2489-290e-4a53-9d3b-6a900d0237ba
Modify Date                     : 2005:12:28 13:03:03-05:00
Create Date                     : 2005:02:15 14:15:34-05:00
Metadata Date                   : 2005:12:28 13:03:03-05:00
Document ID                     : uuid:f8076761-d185-45fc-9dad-d10a03ef2fbb
Format                          : application/pdf
Creator                         : QuarkXPress(tm) 6.0
Producer                        : QuarkXPress(tm) 6.0

EXIF Metadata provided by EXIF.tools