Dialogue Technology VMW1BB Notebook (Flybook) w/ BT, WLAN, and NII Card User Manual vm

Dialogue Technology Corporation Notebook (Flybook) w/ BT, WLAN, and NII Card vm

users manual

User manual — iCopyrightThis publication, including all photographs, illustrations and software, is pro-tected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the manufacturer.Version 1.1, June 2006DisclaimerThe information in this document is subject to change without notice. The man-ufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes.Trademark RecognitionBluetooth is a trademark of the Bluetooth SIG, Inc. (Special Interest Group). The Bluetooth trademark is owned by Bluetooth SIG, Inc. USA. BlueSoleil is a trademark of IVT Corporation. Dialogue Technology Corporation is a registered trademark. FlyBook is a trademark of the Dialogue Technology Corporation. All other product names used in this manual are the properties of their respec-tive owners and are acknowledged.Federal Communications Commission (FCC)This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Flybookii — • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment onto an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Shielded interconnect cables and a shielded AC power cable must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the system's manufacturer could void the user's authority to oper-ate the equipment.Declaration of ConformityThis device complies with part 15 of the FCC rules. Operation is subject to the following conditions:• This device may not cause harmful interference, and• This device must accept any interference received, including interfer-ence that may cause undesired operation.FCC CautionAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Power safety• Only use the supplied power cord.• Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.
User manual — iiiTable of ContentsGetting Started with the VM - - - - - - - - - - - - - - - - -1About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Front-left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Right view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4LED descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Using the fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . 11Using the keyboard and touchpad - - - - - - - - - - - 12Using the touchpad ....................................................................... 12Using Function (Fn) keys ............................................................. 12Using the numeric keypad ............................................................ 14Windows™ keys and other keys .................................................. 14Connecting devices - - - - - - - - - - - - - - - - - - - - - -16Connecting audio devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Connecting an external display . . . . . . . . . . . . . . . . . . . . . . . 19Using an ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Flybook control center - - - - - - - - - - - - - - - - - - - -22Opening the control center . . . . . . . . . . . . . . . . . . . . . . . . . . 22Using the control center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Securing and backing up your system - - - - - - - -23Before you go online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Install virus protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Install a Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Flybookiv — Install spyware blocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Networking your computer - - - - - - - - - - - - - - - - -25Determining IP address settings . . . . . . . . . . . . . . . . . . . . . . 25Setting up a wired connection . . . . . . . . . . . . . . . . . . . . . . . . 25Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Using the built-in Webcam - - - - - - - - - - - - - - - - -27Ergonomics - - - - - - - - - - - - - - - - - - - - - - - - - - - -28Caring for your computer - - - - - - - - - - - - - - - - - -30Things not to do with your computer . . . . . . . . . . . . . . . . . . . 30Cleaning the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31The BIOS setup utility - - - - - - - - - - - - - - - - - - - - -32Accessing the BIOS setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Updating the BIOS firmware . . . . . . . . . . . . . . . . . . . . . . . . . 32The Main BIOS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32The Advanced menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33The Intel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34The Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34The Boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35The Exit menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Troubleshooting and specifications - - - - - - - - - -37Tips for Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37The Power-On Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37General Hardware Problems . . . . . . . . . . . . . . . . . . . . . . . . . 38Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Having the VM Serviced . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - -42
Getting Started with the VMAbout this manualThis User manual provides information to help you operate and get the most from your computer. Read the Setup guide to quickly set up and begin using your computer.UnpackingUnpack the VM and check that the following items are included:VM computer Carry bagStandard 3-cell battery AC adapterQuick Start Guide Warranty cardUser manual Windows® start here bookletRecovery CDs
Flybook2 — Getting Started with the VMFront-left view1. STEREO MICROPHONE• Use the built-in stereo microphone for recording sound and video-conferencing with friends.2. POWER BUTTON• Press and hold the power button for two seconds to turn on the com-puter. 3. TOUCHPAD AND TOUCHPAD BUTTONS• Use the touchpad to move the pointer on the screen. The touchpad and the touchpad buttons have similar functions to a mouse.4. FINGERPRINT READER• When you set up fingerprint authentication, you can use the finger-print reader to turn on the computer.5. HEADPHONE JACK• Connect headphones or external speakers to the headphone jack.12123456789101113121514
User manualFront-left view — 36. MICROPHONE JACK• Connect a microphone to the microphone jack.7. ETHERNET CONNECTOR• Connect the computer to your home or office network (LAN) with the Ethernet connector.8. USB CONNECTORS• Connect USB devices such such as printers or flash drives to the USB connectors.9. MONITOR (VGA) CONNECTOR• Connect an external display or projector to the monitor connector.10. AC POWER CONNECTOR• Connect the AC adapter to this connector.11. AIR VENT• Air vents help to prevent the interior of the computer from overheat-ing. Do not block the air vents.12. SPEAKERS• Stereo speakers are builit in to the computer.13. WIRELESS OFF• Wireless transmission uses power. Use this button to disable the wireless feature of your computer to save power or when instructed to do so, for example on an aircraft.14. INDICATOR PANEL• The LEDs on the indicator panel provide system status information.15. CAMERA• Use the built-in camera for videoconferencing with friends.
Flybook4 — Getting Started with the VMRight view1. DVD/CD-RW COMBO DRIVE• Playback your favorite DVDs or burn CDs on the combo drive.2. DVD/CD-RW LED• Flashes when the combo drive is accessed.3. DVD/CD-RW EJECT BUTTON• Press to eject the drive tray.4. EMERGENCY EJECT HOLE• Insert a straightened paper clip to eject the drive tray when the com-puter is turned off.5. EXPRESSCARD SLOT• Install an ExpressCard in the ExpressCard slot.1234 5
User manualLED descriptions — 5LED descriptions1. BATTERY (NO AC ADAPTER CONNECTED)• Green: The battery is in use and has has more than 10% capacity. • Blinking red: The battery has less than 10% capacity.(AC ADAPTER CONNECTED)• Blinking green: The battery is charging.• Green: The battery is charged.• Red: The battery has a problem and cannot be charged. Return the battery to your reseller for servicing.2. HARD DRIVE• Red: The hard drive is being accessed.3. WIRELESS LAN• Off: The wireless LAN module is turned off.• On: The wireless LAN module is turned on.• Blinking: Date is being transmitted or received.4. WIRELESS WAN• Off: The wireless WAN module is turned off.• On: The wireless WAN module is turned on.NOTE: If no battery is installed, then the battery LED is always off.1234 5 67 8
Flybook6 — Getting Started with the VM• Blinking: Data is being transmitted or received.5. BLUETOOTH™• Slow blinking: The Bluetooth module is on standby.• Fast blinking: Data is being transmitted or received.6. NUM LOCK• Lights when the numeric keypad is enabled.7. CAPS LOCK• Lights when Caps Lock mode is enabled. When enabled you can type alphabetic characters without holding the Shift key.8. CAMERA• Lights when the built-in Web camera is turned on.NOTE: The wireless WAN module is available on some VM models.
User manualInstalling the battery — 7Installing the battery1. Align the guides on the sides of the battery with the guides in the bay and then install the battery.2. Slide the battery release to the closed position.3. Slide the battery lock to the locked position.
Flybook8 — Getting Started with the VMConnecting the AC adapter1. Connect the AC adapter connector (A) to the AC jack on the computer .2. Connect the AC cable (B) to the AC adapter.3. Connect the other end of the AC cable (C) to an electrical outlet.The power LED and the battery charge LED light. ABC
User manualAdjusting the display — 9Adjusting the displayYour computer display can adjusted vertically on the rear support and it can be tilted away from the support to a horizontal position. 1. Open the display.2. Slide the display upwards on the rear support.
Flybook10 — Getting Started with the VM3. Hold the display at the bottom and pull it away from the rear support to the angle you want.4. Adjust the rear support further to the position you want.
User manualUsing the fingerprint reader — 11Using the fingerprint readerThe fingerprint reader allows you to control access to your computer. To enroll your finger:1. Click Start -> All Programs -> Fingerprint Application Suite -> PCA250 -> First-time Wizard. Follow the instructions in the Wizard.2. When prompted, select the finger that you want to enroll.3. Place the tip of your finger above the fingerprint reader as shown below.4. Press your finger down evenly on the reader and then in one smooth action, swipe your finger across the reader.Repeat fingerprint enrollment as prompted in the Wizard.
Flybook12 — Using the keyboard and touchpadUsing the keyboard and touchpadYour computer’s mini-size keyboard and touchpad provide similar functionality as a standard keyboard and mouse.Using the touchpadThe touchpad consists of a pad and two click-buttons. The left and right buttons correspond to the left and right buttons on a mouse. Slide your finger over the pad in the direction you want the pointer to move on the screen. Slide your finger up and down in the scroll area to scroll up and down on the screen. To customize the touchpad, click Start -> Control Panel. In Control Panel double-click the Mouse icon to open the touchpad configuration utility. The configuration utility lets you customize touchpad settings to your prefer-ence. Click Help in the touchpad utility for instructions on changing touchpad settings.Using Function (Fn) keysUsing function keys is a quick way to carry out commands or enable features on your computer. Function keys have a blue icon or have blue text (such as on the Home and PgDn keys). To use this function, press and hold the Fn key (1) and then press a function key (2).PadLeft button Right buttonScroll area
User manualUsing the fingerprint reader — 13The Fn key functions are described below.• Fn + F1: Changes video output to an external display.• Fn + F2: Decreases the display brightness.• Fn + F3: Increases the display brightness.• Fn + F4: Puts the computer in suspend mode. • Fn + F5: Puts the computer in hibernation mode.• Fn + F6: Decreases the volume.• Fn + F7: Increases the volume.• Fn + F8: Mutes/enables the volume. • Fn + F9: Enables or disables the built-in wireless networking feature.• Fn + F11: Enables or disables the built-in Bluetooth feature.• Fn + F12: Turns on or off the built-in Web camera.• Fn + ScrLk: Enables or disables scroll lock. When enabled, pressing the up or down arrow keys scrolls up or down one line respectively.• Fn + PrtSc: Print screen captures the on-screen image to the clip-board. You can then copy the contents to an image editing program.12EscF1~`F2 F3 F4 F5 F6 F7 F8 F9F10F10F11 F12F12NumLkInsertPauseBreakDelete!1@2#3$4%5^6&7*8(9)0_-+=TabQWERTYUIOP{[}]|\Caps LockShiftCtrlFnAltAltCtrlASDFGHJKL:;"'ZXCVBNM<,>.?/PgUpPgUpHome EndBackspaceEnterShiftScr Lk Prt Sc SysRq
Flybook14 — Using the keyboard and touchpad• Fn + SysRq: Terminal request. This key is rarely used.• Fn + Home: Moves the pointer to the beginning of a line in text.• Fn + End: Moves the pointer to the end of a line in text.• Fn + PgUp: Moves text up one screen at a time.• Fn + PgDn: Moves text down one screen at a time.Using the numeric keypadThe keyboard has an embedded numeric keyboard. When you enable it, the Num Lock LED is on. To enable or disable the numeric keypad, press Num Lk.Windows™ keys and other keysKeys such as the Windows Start and application keys, and the Caps Lock key function the same as on a standard keyboard in the Windows environment. • : Opens the Start menu. Use in combination with other keys to perform Windows shortcuts. • : The application key has the same function as the right-mouse button.NOTE: The numpad numbers are printed larger in the illustra-tion for your convenience. On the VM, the numbers are much smaller and on the front edge of the keys.F7F8F9F10F11F12NumLkScr LkPrt ScSysRqInsertDelete^6&7*8(9)0_-+=YU I OP{[}]|\AltCtrlHJ K L:;"'BNM<,>.?/PgUpPgUpHomeBackspaEnterShift778899445566++EnterEnter--//**11002233
User manualUsing the fingerprint reader — 15• Caps Lock: Toggles uppercase on and off. TIP! Refer to the Windows® start here booklet for additional keyboard shortcuts.
Flybook16 — Connecting devicesConnecting devicesThis section covers peripheral devices that you can use with the VM.Connecting audio devicesYour computer has a built-in microphone and speaker. You can also connect an external microphone and headset. 1. Connect speakers or headphones to the headphone jack.
User manualConnecting audio devices — 172. Connect a microphone to the microphone jack.The Realtek Sound Manager automatically opens allowing you to configure audio devices.NOTE: The built-in speakers and microphone are automati-cally disabled when you connect external speakers or a microphone.
Flybook18 — Connecting devicesConnecting USB devicesThere are two Universal Serial Bus (USB) connectors on the computer. You can connect USB devices such as printers or flash drives to either connector.1. Connect the USB device to one of the USB connectors on the computer.2. Install drivers for the device as prompted.CAUTION: Be sure the USB icon on the connector is facing upwards as shown below. Connecting a USB cable incor-rectly can damage the connector on the computer.
User manualConnecting an external display — 19Connecting an external displayYou can connect an external monitor or LCD to your computer with a resolution up to 1800 x 1440. Check the user manual of the display to be sure it supports this resolution.1. With the computer turned off, connect the external display to the VGA con-nector on the computer.2. Connect the display to an electrical outlet.3. Turn on the computer and the external display.4. Press Fn + F1 to switch output to the external display.CAUTION: You can permanently damage a display if it does not support the resolution that your computer is set to. Match the resolution of the VM to the external display before you attach it to the computer.
Flybook20 — Connecting devicesUsing an ExpressCardYou can use 34 mm-wide and 54 mm-wide ExpressCards with your computer. To install an ExpressCard:1. Find the notched edge on the card.NOTE: Do not insert an ExpressCard when the computer is in standby or hibernate mode. If you do, when you try to resume the computer it may not respond.CAUTION: Static electricity in your body can damage Express-Cards. To reduce the static electricity in your body, touch a bare metal table or a grounded metal object before installing an ExpressCard.
User manualUsing an ExpressCard — 212. Insert the card into the slot.
Flybook22 — Flybook control centerFlybook control centerThe Flybook Control Center lets you quickly enable or disable wireless options and change settings such as volume and display mode. You can also check system health with this utility.Opening the control centerTo open the Control Center, click the Flybook icon in the system tray and select Restore. Using the control centerMove the pointer over the buttons on the Control Center panel; the function of the button is described in the Function pane. For example, if you move the pointer over the WiFi button in the center of the panel, the message Turn on/off the Wi-Fi module appears in the Function pane.Expand/hideFunction pane
User manualBefore you go online — 23Securing and backing up your systemBefore you go onlineConnecting your computer to the Internet opens the way to potential threats such as viruses and spyware. To best secure your computer purchase security software (or download it from a secure system), and then install it on your com-puter before you connect it to the Internet.To check your computer’s security settings:1. Click Start -> Control Panel, and then double-click Security Center.Windows Security Center opens.2. Ensure Firewall and Automatic Updates are turned ON.3. Click Get help about Security Center for more information.
Flybook24 — Securing and backing up your systemInstall virus protectionYour computer is installed with a free three-month trial of Norman Virus Control. To check your virus settings, click start -> All Programs -> Norman Virus Control -> Configuration Editor. Click Help for more information.Install a FirewallA firewall protects your computer by blocking or allowing traffic between your computer and the Internet. Windows has a built-in firewall that helps to protect your computer. For better security, purchase a router that has a built-in firewall. You can also download free firewall software on the Internet. Install spyware blockerSpyware typically retrieves information about your Web-surfing habits. It can be secretly installed on your computer with a free download and can even be installed just by visiting a Web site. Spyware can cause your Web searches to be redirected and pop us annoying adds. Once your computer is infected with spyware, it can be very difficult to remove it. The key is to prevent infection in the first place by installing spyware blocker software. Spyware blocking soft-ware can be purchased online and you can even download free spyware block-ing programs.
User manualDetermining IP address settings — 25Networking your computerYour computer has an Ethernet connector that you can use to connect to a wired network at home or in the office. If you have a wireless access point, you can also get online using the built-in wireless LAN of your computer.Determining IP address settingsTo access a network, your computer must have a network IP address. The IP address is either assigned manually (a static IP address), or it is assigned auto-matically by a DHCP router or server. If you already have a home network, you can check a computer on your network to determine if it is assigned an IP address automatically or manually.1. Click Start -> Run.2. Type cmd and click OK.3. At the command prompt, type ipconfig /all.4. Look for the line DHCP Enabled (you may have to scroll up to see it).If DHCP is enabled, then your router assigns IP addresses automatically. You should enable DHCP during the initial Windows setup.Setting up a wired connectionWired connections are more secure and somewhat more stable than wireless connections. You can connect your computer to the network while it is turned on. Refer to the following to set up a wired connection:
Flybook26 — Networking your computer1. Connect an Ethernet cable to the Ethernet connector on the computer.2. Connect the other end of the cable to your router or switch.It takes a few minutes for your router to assign an IP address to your com-puter. When your computer is connected, the following message appears over the LAN icon in the system tray.3. Double-click the LAN icon to view details for your connection.BluetoothYour computer has a built-in Bluetooth module and is already installed with the IVT BlueSoleil utility. Bluetooth allows communication between your computer and other Bluetooth-enabled devices such as cellphones, printers, and key-boards. In order to connect and share services via Bluetooth wireless technology, the two devices must support the same Bluetooth Profile(s). One device must act as a server; the other must be the client. To start using Bluetooth, do the following:1. Press Fn + F11 to enable Bluetooth.2. Double-click the Bluetooth icon in the taskbar or click start -> All Pro-grams -> IVT BlueSoleil -> BlueSoleil to open the IVT BlueSoleil pro-gram.3. Click Help on the menu bar for more information.Local Area ConnectionSpeed: 100.0 MbpsStatus: Connected
User manualBluetooth — 27Using the built-in WebcamYour computer features a built-in Webcam that is already set up and ready to use. Use your Webcam to make live video calls and keep in touch with friends and family. CAPTURING VIDEO1. Press Fn + F12 to enable the built-in Webcam.The camera LED lights.2. Click start -> AMCap or double-click the AMCap icon on your desktop to open the AMCap utility.3. To start recording, click Capture -> Start Capture.LAUNCHING YOUR FAVORITE INSTANT MESSANGERYou can use the Webcam with an instant messanger such as MSN Messager, Yahoo Messager, or Skype. To begin messaging, open your instant messanger and then launch the Webcam.12Stereo microphone
Flybook28 — ErgonomicsErgonomicsErgonomics is the science of equipment design, particulary for working situa-tions, with the intention of reducing discomfort. Ergonomic products, such as keboards or mice, are designed to blend smoothly with your actions.When using your computer try to develop good habits such as the following:• Periodically get up, stretch and walk around the room.• Look away from the display frequently. Don’t face a wall so that you can look up from the screen and into the distance. This exercising of the eyes can help to prevent eye-strain.• Do stretching exercises while you sit.• Don’t work in poor lighting. Position your computer display to minimize glare or reflection. When sitting at your computer, use the following illustration and guidelines:
User manualBluetooth — 29• Position the display to avoid glare from overhead lighting. Adjust the dis-play to achieve an optimal viewing angle as shown above. • Approximately arms-length is a good viewing distance to the display. • Use a comfortable chair that provides good back support.• Sit up straight, with your shoulders back in a relaxed position.• Adjust your chair so that your thighs are paralllel to the floor.• When typing keep your arms, hands, and wrists relaxed and horizontal; type gently and do not rest your palms on the computer.
Flybook30 — Caring for your computerCaring for your computerAfter you unpack your computer, store the packing materials in case you want to ship the computer or if you have to return it for servicing. Your notebook computer is a precision instrument that should be handled with care. Use common sense and follow the guidlines below, and your computer will last you for many years.Things not to do with your computer• Do not twist the display sideways or bend it upwards at only one corner.• Do not place heavy objects such as books on the computer.• Do not expose the computer to • Do not expose the computer to temperatures above 50° C or below 0° C.• Keep the computer away from direct sunlight or heat sources.• Do not expose the computer to rain or moisture.• Do not spill water or any other liquid on the computer.• Do not place the computer near magnetic fields.• Avoid heavy shocks or vibrations to the computer.• Do not expose the computer to dusty or dirty environments.• Do not place the computer on uneven surfaces.• Do not cover air vents around the computer.• Only use the ac adapter that is provided with your computer.
User manualCleaning the computer — 31Cleaning the computerWipe the display with a clean soft cloth. If you use a mild glass cleaner to clean the display, spray a little on the cloth and then wipe the display. Do not spray cleaner directly onto the display.Clean the outside of the computer case with a soft cloth. You can moisten the cloth with a non-alkaline detergent. Use a vacuum cleaner to clean dust from the keyboard. Before cleaing the computer, turn it off, unplug the ac adapter, and then remove the battery.Do not wipe the keyboard, touchpad, touchpad buttons, or fin-gerprint reader with a damp cloth.
Flybook32 — The BIOS setup utilityThe BIOS setup utilityThe BIOS setup utility lets you change core settings on your computer such as the system time, boot order, and auto-repeat rate for your keyboard. Most users will find the default settings are already optimal for their needs. Be clear on changes your make to the BIOS. Choosing incorrect settings can cause your computer not to boot up. Accessing the BIOS setupWhen you turn on your computer a message “Press F2 to enter BIOS” appears. Press F2 to enter the BIOS setup. On the right side of the Setup screen is an area labeled Item Specific Help. This area lists navigation key shortcuts and information that is specific for the item that is selected.Updating the BIOS firmwareYou can install updated BIOS for your computer that you can download from the manufacturer's Web site. New BIOS may provide support for new peripher-als, improvements in performance or fixes for known bugs.The Main BIOS menuIn the Main menu you can make the following changes:
User manualThe Advanced menu — 33SYSTEM TIMESets your system to the time that you specify (usually the current time). The for-mat is hour, minute, second. Insert the appropriate information. Use the Tab or Shift + Tab keys to move between the hour, minute, and second fields. SYSTEM DATESets your system to the date that you specify (usually the current date). The format is month, day, year. Type in the appropriate information. Use the Tab or Shift + Tab keys to move between the month, day, and year fields. The Advanced menuSelect the item from the menu bar to display the following menu:
Flybook34 — The BIOS setup utilityThe Intel menuSelect the item from the menu bar to display the following menu:The Security menuSelect the item from the menu bar to display the following menu:
User manualThe Boot menu — 35The Boot menuSelect the item from the menu bar to display the following menu:The Exit menuAfter you finish making changes to the BIOS use the Exit menu to close the BIOS setup and restart your system. Select the item from the menu bar to dis-play the following menu:
Flybook36 — The BIOS setup utility
User manualTips for Troubleshooting — 37Troubleshooting and specificationsTips for TroubleshootingIn each problem-specific section, try the steps in the order suggested. This may help you to solve the problem more quickly.Try to pin point the problem and thus avoid replacing non-defective parts. Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel.• Use some other electrical device to confirm that the electrical outlet is working.• Ensure the VM is turned on.• Ensure all connections are securely attached. The Power-On Self TestThe Power-On Self Test (POST) runs every time you turn on or reset the com-puter. The POST checks memory, the mainboard, the display, the keyboard, the disk drives, and other installed options. A few seconds after you turn on your computer, a copyright message appears on your display screen. A memory test message appears next; as the test con-tinues, memory size increases until all installed memory is tested. Normally, the only test routine visible on the screen will be the memory test.If failure is detected in an area other than the mainboard (such as the keyboard or an adapter card), an error message is displayed on the screen and testing is stopped.If your system does not successfully complete the POST, but displays a blank screen, emits a series of beeps, or displays an error code, consult your dealer.
Flybook38 — Troubleshooting and specificationsGeneral Hardware Problems A few common hardware problems and suggested solutions are presented in the table below:THE DISPLAY SCREEN IS DARK.Adjust the screen brightness.Make sure that the computer is not in suspend mode.AN INCORRECT DATE AND TIME ARE DISPLAYED.Correct the date and time using the DOS DATE and TIME commands or the options in the Setup Utility. (You can also set the date and time in Windows by double clicking the clock on the task bar or in the control panel.) If the date and time become incorrect after a short time, your CMOS battery may be depleted. Contact your dealer to change the battery.AN UNIDENTIFIED MESSAGE IS DISPLAYED.Reboot the computer and run the BIOS Setup Utility. Confirm the Setup Utility parameters. If the same message is displayed after booting up again, contact your dealer for support.Identifying ProblemsFollow the steps below to identify your problems:1. Turn off the computer.2. Disconnect any peripheral devices such as an external mouse or printer.3. Make sure that the AC adapter is properly connected to your computer and the power source is active.4. Leave the computer off for approximately 10 seconds, and then switch it on again. The computer should enter the boot sequence and start normally. 5. If the computer does not start normally, look for a screen message or other clues on the malfunction, and try the troubleshooting tips below.Conquering Possible Problems
User manualIdentifying Problems — 39THE COMPUTER DOES NOT START OR BOOT-UPIf the power indicator is not on, the computer is without power. Make sure you have properly attached the AC adapter and power cord, or have installed a charged battery.If the computer is running on battery power, ensure that the battery charge is not low. If the battery appears to be charged, it may be faulty.If the computer is using the AC adapter, ensure that the AC outlet, airplane seat jack, or car cigarette lighter are working. If the AC outlet power is working, the AC adapter may be faulty.HARD DRIVE OR EXTERNAL BOOT-UP DEVICE IS INACCESSIBLEIf the hard disk indicator is lit, BIOS may be incorrectly set. Revise the BIOS settings for the Primary Master. Security may be set to prevent starting the operating system. If you choose to boot up your system from an external device through a USB port, make sure it is on and bootable media have been inserted.THE SCREEN IS BLANK OR THE DISPLAY IS ABNORMALThe computer may be set to an external display device only. Press Fn + F1 to switch to the VM display.The power management system may automatically blank the screen to save power, and is in video time-out, standby mode, or hibernation mode. Press any key, move the pointer, or push the power button to turn on the display.The angle of the display and the brightness level is inadequate for the ambient lighting. Adjust the display angle and press Fn + F2 or Fn + F3 to adjust the brightness level.The LCD screen has a default resolution of 1024 x 600 (XVGA). If you set the resolution lower than this, the screen expands to fill the display. When the sys-tem can not expand its display to full screen on the LCD screen or on an exter-nal display device, you can right click on Windows desktop and select Properties to open the Display Properties window. Then click the Settings tab and set the resolution to an appropriate value.
Flybook40 — Troubleshooting and specificationsNO AUDIO OUTPUT The audio system is closed or the volume of audio system is too low. Use hot keys or Flybook Control Center to open the audio system and adjust the vol-ume.The audio output is disabled or too low for the audio application. Open the audio output and adjust the volume.When plugging an earphone or external speaker into the earphone/line-out jack, the built-in speakers are disabled automatically. If you can not hear sound from the built-in speakers, ensure that nothing is plugged into the jack.THE KEYBOARD, TOUCHPAD OR MOUSE DOES NOT WORK PROPERLYThe system may have entered Suspend to RAM mode. Push the power button to resume the system. An application may have locked out your input device. Restart your system.If the keyboard or mouse does not respond on the USB port, ensure that the devices are installed properly and that drivers are installed. CANNOT CONNECT TO A WIRELESS LANAn incorrect network name (SSID) or network key may be used. Make sure you have set the network name (SSID) and key to the same values as the access point (infrastructure connection) or the computers to be connected (Ad Hoc connection) have.The computer may be too far from other communication devices. Retry the connection after moving your computer closer to the computers to be con-nected with (Ad Hoc connection) or to the access point (infrastructure connec-tion). Also, check the wave condition in the Wireless Network Connection Status window.Check if the wireless LAN module is turned on. Verify that Disable Radio is not checked in the Network setting window.Make sure you have access rights or network authentication to the network you want to connect to.Try changing channels to avoid active channel duplication.
User manualHaving the VM Serviced — 41Check the setting of the protocol, work group, shared setting, and IP address.CANNOT CHARGE BATTERY OR LOSING POWER QUICKLYVerify that the battery is properly installed and it is not too hot or too cold. Calibrate the battery.The installed battery may be faulty. Replace it with a new one.Having the VM ServicedIf you are unable to solve the problem, you should have the computer serviced. Pack the computer in the original carton. Include a description of the problem and a checklist of the steps you took when trying to fix the problem. The infor-mation may be useful to the service personnel. Return the computer to the place you purchased it.
Flybook42 — SpecificationsSpecificationsModel VM Wireless PAN: Bluetooth 2.0 with antenna built-in Wireless LAN: IEEE 802.11 a/b/g (Intel 3945) with antenna built-in (Europe / NA / Japan) Processor: Intel LV DUO 1.66GHz Main Memory: 1 ~ 2GB DDR2 Core Logic: Intel 945GM Chipset: ICH7M Display: 12.1” / 16:10 wide-view Color LTPS TFT LCD with (32-bit) 1280 x 768 high resolutions display Hard Disk: 1.8” 30GB ATA x 1 DVD: DVD Combo built - in BIOS and Flash Phoenix TC BIOS External VGA Display Up to 1800 x 1440 resolutions (highest to 32-bit color) LAN: 10/100/1000Mbps Camera: VGA format built-in Audio: Array Mic. / Stereo Speaker built-in Authentication: Finger-Print device and recognition built-in Other I/O ports: ● USB 2.0 x 2 ● PCI-Express x 1 Input Device: ● 82-key standard keyboard ● Mouse Pad and Left/Right button Quick Buttons: ● Power ● RF Kill Battery: Swappable Li-lon rechargeable battery ( standard :3 x 2400mAh ; extended : 6 x 2400mAh ) Dimensions: ● Dimensions: 292 x 222 x 25.8 (thinnest) mm ● 1.64 Kg (with standard battery) Color selection: Black / Grey / Red Operating System: Microsoft Windows XP Pro or Vista Works and Trial Microsoft Office preloaded
User manualHaving the VM Serviced — 43DC-IN POWER SUPPLY (THROUGH DC-IN POWER JACK):Input rating: 19Vdc, 3.42A , 65WMaximum operating temperature (ambient): 40 degree C AC ADAPTER:Model no.: SADP-65KB DBEInput rating: 100-240Vac, 50-60Hz, 1.5AOutput rating:19Vdc, 3.42A, Class I, marked LPS BATTERY:3 cell 18650 Li-Ion rechargeable battery packCharging: Direct DC charging28
Flybook44 — Specifications

Navigation menu