Diasonic Technology Co DDR4500 Digital Voice Recorder User Manual ddr 4500manual

Diasonic Technology Co Ltd Digital Voice Recorder ddr 4500manual

Users Manual

Product Highlights
• Stylish design and sturdy exterior with a wide LCD screen to maximize the display
• Receives all available AM and FM radio stations, and can also be programmed to record any AM or
FM broadcast in advance (20 timers for recording)
• Various programmed recording modes and time settings (specified Date/Week/Weekly)
• MP3/WMA Player
• Good AM/FM radio reception
• Voice recording with adjustable recording quality (32Kbps-256Kbps/MP3 format)
• Internal storage (2GB)
• External memory expandability (up to 16GB)
• Files can be copied to SD card or internal memory
• File dividing: From one file into several
• Internal Stereo Speakers (0.6W Stereo)
• Long lasting Li-ion polymer rechargeable battery (5V 900mA)
• 20 Timers for recording or playback at specified time & date settings
• 10 presets available in AM & 10 in FM
• USB 2.0 interface for easy data transfer to and from a computer
• 24-pin USB connection for faster data transfer
Highly sensitive, built-in microphone. External microphone can be attached through “Mic/Line-
In” Jack
• Key lock function to prevent unintentional operation
• Sleep mode in 15, 30, 45, 60, 75, 90, 100, and 120 minutes
• Digital volume control (30 steps)
• Equalizer modes: Normal, Classic, Live, Pop, Rock,Jazz, Voice (low cut), and Filter-High
• Playback Modes: Play All, Play Once, Repeat All,Random Play, Repeat
• Fast forward/rewind: Search at 3 seconds/7 seconds/1 minute/2.5 minutes
Quick Start Guide
Fully charge the Battery before use.
Press and hold the PLAY ►∥ (6) button for 2 seconds
to turn the power on.
Note: The “MENU” screen is the starting point
for all functions. You can access the “MENU” screen
at any time by pressing the MENU Button (10).
To Highlight an item = Use the UP ▲(2) and DOWN ▼(7) Buttons.
To Select an item = Highlight the item, then press and release the PLAY Button ►∥ (6).
To Return to “MENU” = Use the MENU Button (10).
1. To Set Time and Date Highlight and then select “Settings”. Highlight and then select
“System Settings”. Highlight
and then select “Time and Date”. Use the RIGHT ►►(5) and LEFT ◄(8) buttons to move between
hours, minutes,
months, days, and years. Use the UP ▲(2) and DOWN ▼(7) buttons to modify the highlighted item.
Use the PLAY
Button ►∥ (6) to save changes.
2. To Play AM Radio Highlight and then select “AM”. Use the RIGHT Button ►►(5) and LEFT
Button ◄◄(8) to scroll through the radio frequencies.
3. To Play FM Radio Highlight and then select “FM”. Use the RIGHT Button ►►(5) and LEFT
Button ◄◄(8) to scroll through the radio frequencies. Earbuds, or the included wire antenna,
function to improve the FM radio reception.
4. To View and Play Files or Recordings — Highlight and then select “Files”. Highlight and then
select a folder to view the files within. Highlight and then select the file you wish to play.
5. To Set or Review Timers Highlight and then select “Timers”. Highlight and then select
“Set Timers”. Use the RIGHT ►►(5) and LEFT ◄◄(8) buttons to change to the Timer you wish to set
or review. Use the UP ▲(2) and DOWN ▼(7)
buttons to move between highlighted items. Use the RIGHT RIGHT ►►(5) and LEFT ◄◄(8) buttons to
modify a highlighted item. When finished, press the PLAY Button ►∥(6) to save your timer.
6. To Record from the Internal Microphone or LINE/MIC Jack — Press and release the REC Button (1)
to start or stop recording. For more information about recording
(1) REC (Record) BUTTON and LIGHT The REC Button has 6 functions:
a. It records AM or FM radio.
b. It will record from the internal microphone or an external microphone plugged into the
Line/Mic input.
c. Stops a recording.
d. Stops play of a timer activated file or recording.
e. Flashes when powering off when a timer is set.
f. The red light comes on when a timer activates.
(2) UP BUTTON ▲
The UP Button has 6 functions:
a. Highlights items for selection.
b. Toggles through preset radio stations
c. Toggles through files while playing.
d. Creates a new track when recording.
e. Stops a paused file and highlights file.
f. Increments selected items in the “Time and Date” setup.
(3) BACK BUTTON
The BACK Button has 4 functions:
a. Exits current folder, function, or menu to previous location.
b. Activates option to delete saved preset while playing AM or FM radio.
c. Marks spot in a file, while playing a file.
d. Stops a paused file and highlights it.
(4) INT/SD A< >B BUTTON
The INT/SD A< >B Button has 2 functions:
a. Toggles between the internal memory and SD card memory while in AM, FM radio, or Files.
b. Marks a section of a file to be repeated.
Any section of the currently playing file can be repeated by pressing and releasing at the
desired section (A) and then again at the end of the desired section (B). Play will repeat
between (A) and (B) until INT/SD A< >B is pressed again.
(5) RIGHT BUTTON ►
The RIGHT Button has 8 functions:
a. Toggles through the AM or FM radio frequencies. Hold down to auto scan to next AM or FM
station.
b. Opens a highlighted “File” folder.
c. Fast forwards a playing file up to 4 speeds.
d. Highlights items.
e. Increments slider bars in “Settings”.
f. Resets scrolling of highlighted file names.
g. Modifies or toggles through selected timer-setup options.
h. Locks highlighted file so it cannot be modified.
(6) PLAY BUTTON ►
The PLAY Button has 7 functions:
a. Power On/Off by holding down.
b. Opens highlighted “File” folder.
c. Plays a highlighted file.
d. Pauses a playing file.
e. Selects highlighted item.
f. Saves Timer Settings.
g. Saves an AM or FM radio station to a memory preset.
(7) DOWN BUTTON ▼
The DOWN Button has 5 functions: P MENU BUTTON
a. Highlights items for selection.
b. Toggles through preset radio stations.
c. Toggles to next file while playing.
d. Marks or unmarks select days or time of the week in Timer Settings for recording or file
playing.
e. Increments selected items in the “Time and Date”setup.
(8) LEFT BUTTON ◄
The LEFT Button has 7 functions:
a. Toggles through the AM or FM radio frequencies.
b. Exits current file folder.
c. Rewinds a playing file up to 4 speeds.
d. Highlights items.
e. Increments slider bars in “Settings”.
f. Modifies or toggles through selected timer-setup options.
g. Unlocks a highlighted file.
(9) PLAY SPEED BUTTON
The PLAY SPEED Button has 2 functions:
a. Toggles a playing file through 5 play speeds.
b. Marks or unmarks a file as “Favorite” when highlighted.
(10) MENU BUTTON
The MENU Button has 1 function:
Toggles between “Previous Selection” and MENU.
(11) EDIT BUTTON
The EDIT Button has 1 function:
Opens and closes the file EDIT menu.
(12) RESET BUTTON
The RESET Button has 2 functions:
a. Soft Reset This function is useful in the unlikely case that the CC Witness malfunctions or
“freezes”.
Previous settings will not be erased.
i. Press the reset button one time quickly.
ii. The CC Witness will cycle to power-off, and then cycle to power-on again.
b. Hard Reset This function is useful to solve malfunctions that the “Soft Reset” is unable
to repair. Except for time and date, all previous settings will be reset to factory defaults. All
files on the internal memory will be erased.
i. With the LOCK switch in the “up” position, press and hold the BACK button.
ii. While continuing to hold in the BACK button, press and release the RESET button.
iii. Continue to hold the BACK button until “FormatPlease Wait is displayed, then
release. Formatting takes about one minute to complete.
iv. When formatting is finished, position the LOCK switch to the “down” position before
using.
(13) VOLUME + – BUTTON
The VOLUME + – Button has 30 levels of loudness.
Press and release or press and hold “+” to increase or “–” to decrease the volume.
(14) LOCK SWITCH
The LOCK SWITCH has two positions: If moved to the “up” position, then the CC Witness will be
locked and all buttons will be disabled. This feature is used to prevent buttons from being
accidentally pressed during travel or storage. If a button is pressed while locked, the time and
date will be displayed, along with the “Lock Switch ON”message.
(15) MIC
The internal microphone is used to make voice recordings.
(16) MIC/LINE IN JACK
This jack is used to record from an external source such as a CD player, radio, or external
microphone. Choose between using a MIC or LINE IN source.
(17) SD CARD SLOT
Add up to 16GB of memory storage by inserting an optional SD card.
(18) HEADPHONE JACK
The Headphone Jack has 2 purposes:
a. To connect headphones or earphones.
b. To connect the FM Antenna Wire, for improved FM
reception, when using the built-in speakers.
(19)LOCK SWITCH
To turn the CC Witness LOCK Switch “On”, slide the LOCK Switche“up”.
Before using the CC Witness, check the LOCK switch to be sure it is off. While the LOCK switch is
on, all buttons will be disabled. To turn the CC Witness LOCK function “Off”, slide the LOCK
Switche“down”.
Note: You can turn the LOCK function “On” while the it is in operation. If a button is pressed
while
the LOCK function is “On”, the “Lock Switch On” displays for two seconds, along with the time
and date.
“MENU” SCREEN
PLAY ►∥(6) Press and hold the PLAY Button
for 2 seconds to turn the power on.
Note: Charge the Battery before use.
upon startup and is the starting point
for all functions.
You can access the “MENU” screen at any time by
pressing the MENU button. The “MENU” screen has 5
functions: AM, FM, Files, Settings, and Timer.
Use the UP ▲(2) and DOWN ▼(7)Buttons to highlight one of the menu items.
Use the PLAY Button ►∥(6) to select the menu item.
1. To Play AM Radio Highlight “AM”. Then press and release the PLAY Button ►∥(6) Button.
Then use the RIGHT Button ►►(5) and LEFT Button ◄◄(8) to scroll through the radio frequencies.
2. To Play FM Radio Highlight “FM”. Then press and release the PLAY Button ►∥(6) Button.
Then use the RIGHT Button ►►(5) and LEFT Button ◄◄(8) to scroll through the radio frequencies.
3. To View and Play Files or Recordings Highlight“Files”. Then press and release the PLAY
Button ►∥(6) Button. Use the UP ▲(2) and DOWN ▼(7) Buttons to highlight a folder. Then press
and release the PLAY Button ►∥(6) to select the highlighted folder and view the files within.
Highlight a file you wish to play using the UP ▲(2) and DOWN ▼(7) Buttons
and then press and release the PLAY Button ►∥(6) to play it.
4. To View and Configure Settings Highlight “Settings”. Then press and release the PLAY
Button ►∥(6) Button. Use the UP ▲(2) and DOWN ▼(7) Buttons to highlight a Setting. Then press
and release the PLAY Button ►∥(6) to select the highlighted setting and view the Settings
options. Highlight the Setting you wish to configure using the UP ▲(2) and DOWN ▼(7) Buttons
and then press and release the PLAY Button ►∥(6).
5. To Set or Review Timers Highlight “Timers”, then press and release the PLAY Button ►∥(6)
Button. Use the UP ▲(2) and DOWN ▼(7) Buttons to highlight “Set Timers”. Then press and
release the PLAY Button ►∥(6) to select the highlighted item. Use the RIGHT ►►(5) and LEFT ◄◄(8)
buttons to change to the Timer you wish to set or review. Use the UP ▲(2) and DOWN ▼(7) Buttons
to move between highlighted items. Use the RIGHT ►►(5) and LEFT ◄◄(8) buttons to modify a
highlighted item. When finished, press the PLAY Button ►∥(6) to save your timer.
6. To Record Press and release the REC Button (1) to record from the internal microphone or
LINE/MIC jack.
“AM” AND “FM” RADIO
The “AM” & “FM” radio screens have 6 functions:
1. Playing AM or FM Radio – Select “AM” or “FM”
from the “MENU” screen, then press and release
the PLAY Button ►∥(6). The radio will play automatically.
To exit, press the MENU or BACK button.
2. Tuning Stations — Press the RIGHT ►►(5)
to tune to a higher frequency. Press the LEFT
LEFT ◄◄(8) to tune to a lower frequency.
3. Preset a Station to Memory —
a. While playing a radio station, press and
release the PLAY Button ►∥(6).
b. Select the desired preset memory number by
pressing UP ▲(2) and DOWN ▼(7).
c. When the desired preset memory number is
blinking, press the PLAY Button ►∥(6)to confirm.
Note: There are 10 memory presets available on each band.
4. To recall a Station from Memory Preset — Press the UP ▲(2) and DOWN ▼(7)to recall memory
presets.
5. Delete a Station from Memory Preset — While playing a station that is preset, press the BACK
Button (3). A message will ask you to confirm the deletion of the preset. Highlight “Yes” then
press the PLAY Button ►∥(6)to confirm.
6. Record a Radio Station — Press and release the REC Button (1) to start and stop a recording.
“FILES” SCREEN
6 built-in file folders located on internal memory.
When recording, the files are automatically
saved in subfolders within these folders.
The default files display screen is
“View By Folders”. The “Files” screen
has 6 folders where files are stored.
1. AM radio files are stored in the “AM” folder.
2. FM radio files are stored in the “FM” folder.
3. Timer files are stored in the “TIMER” folder.
4. Computer files — This folder is reserved for computer file storage.
5. Microphone files are stored in the “MIC” folder.
6. Line-in files are stored in the “LINE” folder.
Note 1: All “Timer” recorded files are stored in the “Timer” folder without consideration to
“AM”, “FM”,“MIC”, and “LINE” source.
Note 2: Recordings made on the same day and from the same source (“AM”, “FM”, “LINE”, or
“MIC”) will be automatically stored in a subfolder representing the day it was recorded. Timer
recordings will be stored in a subfolder that represents the timer number used.
Note 3: Recorded files are automatically named by date, time, and a sequential number that is
used to uniquely identify each file.
“Files” Menu Controls
Open Folder — Press the PLAY Button ►∥.
Close Folder — Press the BACK Button (3).
Mark a File as “Favorite” — Press the Press the PLAY
SPEED Button (9) when the file name is highlighted. Repeat this process to remove a “Favorite”
mark from a file. It is possible to view only files that are marked as “Favorites”. See
Settings>Play Settings>Folder Views from the MENU (10) for more about viewing “Favorites”.
Lock File Press and hold the RIGHT Button “Lock” a file. While a file is “Locked”, it
cannot be erased or divided.
Unlock File — Press and hold the the LEFT Button ◄◄ Ito “Unlock” a file.
Play File — When a file is highlighted, press the PLAY Button ►∥.
Main AM Folder Example AM Subfolder
Example Subfolder Files Playing a recorded AM File
Note: When a new recording is finished and “Files” is selected from the main “MENU”, the CC
Witness will jump to the newly recorded file and highlight it. To go back to the beginning of the
“Files” menu, press the BACK Button(3) several times.
“SETTINGS” SCREEN
The “Settings” screen is categorized into 5 main groups:
1. “Play Settings”
a. “Folder Views” — Choose how your files are displayed when viewed.
i. “View by Folders” — This setting groups your files into folders that are categorized
by recording source.
ii. “View all Files” This setting groups all your files into one area. Your computer
files show first on the top of this list, followed by AM radio files, then FM radio files, then
Timer files, then Mic files, then Line files.
Note: Long file names will scroll after 2 seconds when the name is highlighted.
iii. “View Favorites” — This setting will group and only display files marked as a “Favorite”
. All other files will not be displayed.
iv. “Spot Marked” This setting will group and only display files that have been “Marked”.
All other files will not be displayed.
b. “Playback Modes” — Choose from 5 methods of file playback:
“Play 1 File 1 Time” — This setting plays the selected file one time and then stops play.
“Playback All 1 Time” — This setting plays all the files in a folder one time in order then
stops play.
“Repeat 1 File” — This setting plays the selected file repeatedly.
“Repeat All” — This setting plays all files in a folder and then continues to repeat playing
the files.
“Random Play” — This setting plays all files in a folder at random endlessly.
2. “Record Settings”
a. Record Qualities — Individually adjust the recording qualities for AM, FM, Line-in, and
Microphone.
Recording time is based on record quality using the internal memory (2 Gigabytes):
32Kbps = 140 hours
64Kbps = 70 hours
96Kbps = 52 hours
128Kbps = 35 hours
256Kbps = 17 hours
Note: Available recording time is calculated on the available free space where the file will be
recorded.
b. “Mic/Line Choice” — Choose from 3 input options for recording:
1. MIC (Mono)
2. MIC (Stereo)
3. LINE-IN (Stereo)
c. “Create Tracks” — This setting is used when recording from a CD player, tape player, record
player, or other external source. When this setting is activated, the CC Witness will detect the
amount of silent space between audio tracks. When the set amount of time without sound expires,
the CC Witness will automatically create a new recording track. When “Create Tracks” is
activated, some clipping of the first part of the next audio track may occur (usually about a
half second). To manually create your own tracks press the UP Button ▲(2) while recording.
Use the slide bar to adjust and set the desired amount of time without sound before creating a
new track.
3. “Sound Settings”
a. “Play Equalizer” — The Play Equalizer
has 8 settings: Normal (None), Jazz, Classic,
Pop, Rock, Live, Voice (Low Cut), and Filter-High.
These settings will change the sound of file in
playback only. These settings are also helpful
for filtering out high-pitched electronic noise
or to improve voice on playback of AM files.
b. “3D Effect On/Off” When this setting is turned “On”, the CC Witness will adjust file
playback to sound three-dimensional.
c. “Beep On/Off” — When this setting is turned “On”, the CC Witness will make a beep sound
with every button press.
d. “Default Volume” — When the CC Witness is powered-on, the volume will automatically lower to
the “Default Volume” setting. If the volume was manually set lower than the “Default Volume”
setting, it will not change at power-up.
4. “Display Settings”
a. “AM Display” — This setting is used to
improve the AM radio reception by turning the display
screen “OFF”. If any button is pressed, the display
screen will turn “ON” for three seconds,
then turn “OFF” again.
b. “Backlight Time” — Use the slider bar to set the
amount of time that the display backlight is to re
main “ON” between button presses. If set to “Continue”, the backlight will remain “ON”.
Adjusting the Backlight Time setting is useful for conserving battery power, as more power is
used when the backlight is “ON”.
c. “Contrast Control” Use the slider bar to adjust the contrast of the display. When set too
low, the display will not be as visible. The default setting of “05” is usually best.
d. “ID3 Tag” This setting is used to display added information that may be attached to
computer audio files. When set to “ON” and an audio file with ID3 tags is selected, the title
of the file may also contain the Artist, Album, track time, and more. When set to “OFF” only
the title of the audio file will be displayed. Most ID3 tags can be viewed and edited with a
Windows computer by selecting the file’s “Properties”, then selecting the “Summary” tab.
Note: When a long filename has been highlighted, it will scroll after two seconds.
5. “System Settings”
a. “Time and Date” — Use the RIGHT ►►(5) and
LEFT ◄◄ (8) buttons to move between hours,
minutes, months, days , and years. Use the UP
▲(2) and DOWN ▼(7) buttons to modify the
highlighted item. Use the PLAY Button ►∥(6) to
save changes. Use the MENUP or BACKW
to exit without saving.
b. “Sleep Timer” The Sleep Timer can be set to play for 15, 30, 45, 60, 75, 90, 100 or 120
minutes. When that time expires, the it will power off automatically. A icon will appear at the
top of the display to let you know that the “Sleep Timer” has been enabled. The Sleep Timer
will be disabled if it is powered off and then on again. The Sleep Timer can also be useful when
recording radio shows up to two hours in length, because it will stop recording at the set time
and then power off.
c. “Auto Off Time” This setting is used to conserve power. There are 4 settings for “Auto
Off Time”: Off, 1, 3, and 5 Minutes. If itis not playing or recording and no buttons are pressed
for the preset amount of time, it will power off.
d. “Factory Defaults” This is used to reset it back to the default factory settings. This
setting will not affect the Time, Date, Files, or Timer schedules.
e. “Format Memory” — Choose to format the internal or (optional) SD card memory. When memory is
formatted, all files on the selected memory are permanently erased. It is best to format a new or
previously used SD card before recording files to it. Use caution when formatting memory, as it
permanently erases your files!
f. “10 or 9 KHZ” If using the CC Witness to listen to AM radio in Europe, use this setting to
switch AM Radio to 9kHz AM tuning steps.
Note: All timer schedules and radio station memory presets will be erased when switching between
10kHz for North America and 9kHz tuning steps for Europe. You may want to write down your presets
before using this function.
g. “Memory Info” — This screen will display the total and free amount of memory remaining for
the Internal and (optional) SD card memories. Also, the firmware version will be displayed at the
bottom of this screen.
“TIMERS” SCREEN
The “Timers” screen has three main functions:
1. “Set Timers”
Use the RIGHT ►►(5) and LEFT ◄◄ (8) buttons to
modify timer settings. Use the UP ▲(2) W and DOWN
▼(7) buttons to move to the next or previous timer
setting. When all settings are set, save the timer
setup by pressing the PLAY Button ►∥(6).
Timer Settings explained:
“Timer” — Select which timer, by number, to
setup. There are 20 timers available.
“Status” — Choose whether the timer will
“Record” or “Play” when activated. Set to “OFF”
to reset timer back to default settings.
“Memory” — Choose to record or play using the
“Internal” or the (optional) “SD Card” memory.
“Source” — If the timer “Status” is set to record,
then select which source (“AM”, “FM”, “MIC”, or
“LINE”) to record from. If the timer “status”
is set to play, then select which source
(“AM” radio, “FM” radio, or a saved “File”)
to play from. “Preset” — If you have set
radio stations to memory presets, then you can select them in this setting.
“Freq” — Manually tune to the desired radio station.
“Day(s)” — Choose to play or record on a specific
“Date” or “Weekday”. If “Weekday” is selected, then by default every day will be selected
to activate the timer. To choose specific days,highlight “Daily” and press the RIGHT ►►(5) or
LEFT ◄◄(6) button to bring up a weekday selection screen. Mark or unmark weekdays by pressing
the DOWN ▼(7) button. When finished,
press the PLAY Button ►∥(6) to continue.
“Start” — Sets the time when the timer will “Start”.
“End” — Sets the time when the timer will “End”.
When finished and all settings are set, press the PLAY Button ∥(6) to save the setup. Confirm
by selecting “YES”. To exit the timer setup without saving, press the BACK button, then confirm
by selecting “NO”.
2. “Review Timers”
This screen displays the status of all 20 timers.
Timers set to record are marked with an “R” next to
the timer number. Timers set to play are marked
with a “P” next to the timer number. It is possible to
review and modify a timer’s settings by pressing the
PLAY Button ►∥(6) when the timer is highlighted.
3. “All Timers ON/OFF” — This setting is useful for
turning “Off” or disabling all your timers without
erasing the settings. When set from “OFF” to “On”
all timers will retain their previous setups.
“EDIT” SCREEN
The “EDIT” screen has 5 functions:
Note: The “EDIT” screen can only be accessed with the EDIT Button (11) when a file is
highlighted, playing or paused.
1. “Erase File(s)” — Erase unwanted files to free up memory space and reduce clutter.
a. To erase a file, you must have the file’s title highlighted or be playing the file.
b. Select “Just This File” to erase only the file that is selected. Select “All in Folder” to
erase all files in the currently selected folder.
c. To cancel the operation, press the BACK (3), or the MENU (10) buttons.
2. “Copy File(s)” — Copy one file or all files in a folder
from the internal memory to the (optional) SD card
or from the SD card to the internal memory.
a. To copy a file, you must have the file’s title highlighted or be playing the file.
b. Select “Just This File” to copy only the file that is selected. Select “All in Folder” to
copy all files in the currently selected folder.
c. Select a location on the other memory source to copy the file to. Use the RIGHT ►►(5) and LEFT
◄◄(8)bottons to open or close folders, and the UP ▲(2) and DOWN ▼(7) buttons to view folder
contents. Press the PLAY ►∥ button to select the location.
3. “Divide File” — Divide a file in half or at the point where the file is paused.
a. To divide a file you must have the file’s title highlighted be playing the file.
b. Select “Divide in half” to divide the file into two even halves. If file play is paused,
select “Divide at Pause” to divide the file at the pause point.
Note: When a file is divided, two additional files are created and the original file remains
intact. The first additional file will retain the original file name but with _A”added to the
end. The second additional file will also retain the original file name but with “_B” added to
the end.
If either of the additional files is divided again then this process will repeat.
4. “Mark File” Mark a file as “Favorite File” or “Mark Spot” to bookmark a play location
in a file for later reference.
a. “Mark Spot” While playing a file select “Mark Spot” to a reference point above the play
bar.
Note: It is also possible to mark a spot by pressing the BACK Button (3) while playing. After 30
seconds, another spot can be marked. A maximum of four spots can be marked in a file.
b. “Favorite File” — While playing a file, select “Favorite File” to mark it as a favorite.
Note 1: “Favorite File” can also be marked while play is stopped, by pressing the PLAY SPEED
Button (9) when the file name is highlighted. Repeat this process to remove a favorite mark from
a file.
Note 2: It is possible to view only files that are marked as “Favorite File” or “Spot Marked”.
See “Folder Views”or more about viewing options.
5. “Clear Marks” — Remove “Favorite File” mark or“Marked Spot” (bookmarks) from a file.
a. “Clear Spot” While a file is playing or highlighted, select “Clear Spot” to remove all
previously marked spots from a file.
b. “Clear Favorite” While a file is playing or highlighted, select Clear Favorite” to
remove the “Favorite File” status.
FILE PLAY
To locate and view files to play, select “Files” from the MENU and then press and release the
PLAY Button ►∥(6) . Select the folder and press and release the PLAY Button ►∥(6) to open the
folder to view files. Select the file, then press and release the PLAY Button ►∥(6) to play the
file.
Pause — Press the PLAY Button ►∥ to pause a playing file. Press again to resume play.
Stop — Press the BACK Button (3) to stop a paused file.
Fast-Forward — Press the RIGHT Button ►►(5) . Press again for faster speeds.
Rewind — Press the LEFT Button ◄◄(8) . Press again for faster speeds.
NOTE: There are 4 speed levels for “Fast Forward” and “Rewind”: 3,7, 60, and 150 time normal
play speed.
Play Next File — Press the DOWN Button ▼(7).
Play Previous File — Press the UP Button ▲(2).
Change Play Speed Press the PLAY SPEED Button (9). Press again to cycle through five play
speeds.
Repeat a Section — Press the INT/SD A< >B Button (4) to mark a section of a file to be repeated.
Any section of the currently playing file can be repeated by pressing and releasing at the
desired section (A) and then again at the end of the desired section (B). Play will repeat
between (A) and (B) until INT/SD A< >B is pressed again.
Note: This function is great for learning a new language;
you can repeat a section of the lesson over and over again.
Mark “Spot” Press the BACK Button (3)while playing in order to bookmark your spot for later
use. For more about marking spots
Edit — It is possible to copy files, divide files, mark a file as favorite, or bookmark a spot in
a file as you play a file. for more information about the “Edit” screen.
Note: While playing a file, the main menu can be accessed by pressing the MENU Button (10). The
file will continue to play unless “AM” or “FM” radio is selected from the main menu. To
return to the playing file, press the MENU Button (10) again.
RECORDING
There are two ways to make recordings:
Manual Recordings Press REC button while in a mode like AM or FM. If you are in the Menu or
File screen, and you press REC, it will record from internal mic or external line-in mic. For
more on Manual Recordings, Timed Recordings are made with timers and scheduled for specific times
on a day, week or date. For more information on setting and using Timers To stop a recording, you
must wait until you have recorded for five seconds then press the REC (1) or MENU (10) button. To
create a new recording track while recording, press the UP Button ▲(2) . To pause or unpause a
recording, press the PLAY Button ►∥(6) . When the recording is completed, it will be stored in
“Files” in the “AM”, “FM”, “Timers”, “Mic”, or “Line” folder.
Note: The save location for a recorded file depends on what source you were recording from.
TRANSFERRING FILES TO AND FROM A COMPUTER
Using a PC:
1. Connect the CC Witness to a PC using the supplied USB cable at the 24-Pin USB Connection (20).
2. Click on the ‘My Computer’ icon on the PC. Look for a removable disk icon, usually displayed
as Drive E or F.
3. Double click on the disk icon belonging to it.
4. Files from the PC can now be downloaded onto it via dragging and dropping, copying and pasting,
etc. Likewise, files can be uploaded to the PC from the CC Witness using these methods.
Using a Mac:
1. See PC instructions for item 1.
2. The CC Witness will be displayed on the Mac desktop as an external drive icon. Proceed with
Items 3 and 4 from PC instructions.
Note 1: If transferring files to the CC Witness, we recommend
storing them to the “Computer” folder on it for organizational purposes.
Note 2: You can also transfer files from the internal memory of the CC Witness to an SD card.
DISCONNECTING THE CC WITNESS FROM A COMPUTER
Before unplugging it, it is necessary to deactivate the link between them. While de-activated, it
will continue to charge and can be used normally to play or record. You will not be able to
transfer files while it is de-activated unless the USB cable is removed and re-inserted.
De-activate from a PC: Left click the
“Safely Remove Hardware” icon that
is found in the bottom-right toolbar. Click
“Safely Remove USB Mass Storage Device — Drives”.
De-activate from a Mac:
Drag the external drive icons that were added
when you connected your CC Witness to the trash
can (usually found in the Dock). Another method
is to Control-Click and select “Eject”
from the drop-down menu.
Model: DDR-4500
ANSI C63.4: 2003
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Notice: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.

Navigation menu