Diggin Active 13LPB10007M-DG Lazer Pitch Baseball User Manual Preliminary R01

Diggin Active, Inc. Lazer Pitch Baseball Preliminary R01

User Manual

Cut linePage 4Size:210mmX297mm (Jan/29/2014,R01)Pitching MachineAssembly and Playing InstructionsPlease read: Important Information:This product is intended only for outdoor recreational use in pitchinglightweight plastic baseballs, provided by Diggin active Inc.Use only with balls designed for use with this item by Diggin.All person(s) not batting should stand behind the pitching machine.Do not use the product for any other purpose or with any other object or ball.Do not us regulation baseballs or teeballs.Do not point toward breakable objects, for example: Windows,outdoor lights,etc.If the product jams, turn machine to “OFF” position. Pick it up,point towardground away from a person or breakable odject, dislodge ball.Use product only on a  flat surface.Adult Assemly and Supervision Required.Cut linePage 1Fold linePage 2 Page 3Fold lineABCDEFPARTS LIST:Part#         Description                     Quantity  Machine Base                     1pcBat Top                                  1pcBat Handle                           1pcBall Carriage                        1pc                    Machine Support               3pcsBaseballs                               5pcsAbcdefTO ASSEMBLE:1.Install the machine support to the base;2.Install the ball carriage at the top of the base;3.Load the balls into the ball carriage;4.Assemble the two setions of the bat;Install 4pcs “D” size(1.5V) batteries following the polarity(+/-).Battery Installation :1.Unscrew the battery carriage screw with a Phillips screwdriver2.Install 4 “D” size batteries(not included)   Install 1pc 9V battery following the polarity(+/-).MachineBase Bat Handle FDEACBFold lineChute OpeningAuto/O/BAT SwitchAutoOFFTO OPERATE:1.The chute opening can be rotate 30 degree, 40 degree, 50 and 90 degree positions;2.When trun machine to “Auto” position, the balls will be shoot out automatically in every 8 seconds    and shooting distance  around 20 feet;3.When trun machine to “BAT” position, the balls will be shoot out 1 second after pressed the RF button    of bat;Battery Safety:1.Read and follow all instructions noted here before use, and keep these instructions for future reference.2.Don’t mix alkaline and rechargeable nickel-cadmium standard ( carbon zinc ) batteries.3.Remove and dispose of worn out batteries safely.4.The supply terminals are not to be short-circuited.   5.Don’t mix new and old batteries.6.Don’t get your batteries wet, and never operate the pitching machine in sand, mud, water or snow.7.Do not dispose of batteries in re.+-+++- --++--󰔢 2013 Diggin Active, Inc.   www.digginactive.com      MADE IN CHINA      Questions? Contact: 1-888-388-8835ROFFAUTOBATBATOffOnAutoThe low-speed will be switched automatically when the barrel in 90 degree position(For pop up pitching)20 feet30 degree40 degree50 degreeWarning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 90 degree

Navigation menu