Digi 50M1768 Sigma Pumps Integrated 802.11abg Module User Manual 90001158 88 A
Digi International Inc Sigma Pumps Integrated 802.11abg Module 90001158 88 A
Digi >
User Manual
Digi International declares, that the product:
Product Name:
Sigma Pumps Integrated 802.11abg Module
to which this declaration relates, meets the
requirements specified by the Federal Communications
Commission as detailed in the following specifications:
- Part 15, Subpart B, for Class B Equipment
- FCC Docket 96-208 as it applies to Class B
- Personal computers and peripherals
The product listed above has been tested at an
External Test Laboratory certified per FCC rules and
has been found to meet the FCC, Part 15, Class B,
Emission Limits. Documentation is on file and available
from the Digi International Homologation Engineer.
Sigma Pumps Integrated 802.11abg Module
FCC ID: MCQ-50M1768
International EMC Standards
The Sigma Pumps Integrated 802.11abg Module meets
the following electromagnetic emissions standards:
- EN55022 - EN55024 - EN 300 328 - EN 301 489
- RSS 210 - VCCI - AS 3548 - RSS 210
FCC ID: MCQ-50M1768 (Sigma Pumps Integrated
802.11abg Module)
IC: 1846A-50M1768 (Sigma Pumps Integrated
802.11abg Module)
Safety Standards
OEM is responsible for safety and certification for the
host device.
The Sigma Pumps Integrated 802.11abg Module has
been tested and found to comply with the limits for
Class B digital devices pursuant to Part 15 Subpart B,
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential environment. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause
harmfulinterference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
tuning the equipment off and on, the user is
encouraged to try and correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
the receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced Radio/TV
technician for help.
Per FCC 15.407(e), the device is restricted to indoor
use in the 5.15 - 5.25 GHz band.
Labeling Requirements (FCC 15.19)
The host device must contain a label that states
“Contains FCC ID: MCQ-50M1768”.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
L'équipement doit comporter une étiquette déclarant
"Contient l'ID IC: 1846A-50M1768". Cet équipement
est conforme à la Partie 15 de la Réglementation
FCC. Son utilisation doit répondre aux deux
conditions suivantes :
(1) Cet équipement ne doit pas produire
d'interférences nocives et
(2) Cet équipement doit accepter n'importe quelle
interférence recue, y compris les interférences
susceptibles d'entraîner un fonctionnement
indésirable.
Modifications (FCC 15.21)
Changes or modifications to this equipment not
expressly approved by Digi may void the user’s
authority to operate this equipment.
Industry Canada
This digital apparatus does not exceed the Class B
limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Le present appareil numerique n'emet pas de bruits
radioelectriques depassant les limites applicables
aux appareils numeriques de la Class B prescrites
dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications
du Canada.
--IC (Industry Canada) RSS-210 Issue 8
Section 6.2.2(o)
Declaration of Conformity
(in accordance with
FCC Dockets 96-208 and 95-19)
Manufacturer's Name:
Corporate Headquarters:
Manufacturing Headquarters:
Digi International
1001 Bren Road East
Minnetonka, MN 55343
10000 West 76th Street
Eden Prairie, MN 55344
FCC Part 15 Class B
Radio Frequency Interference (RFI)
(FCC 15.105)
(1P):90001300-88 A
Digi International declares, that the product:
Product Name:
Sigma Pumps Integrated 802.11abg Module
to which this declaration relates, meets the
requirements specified by the Federal Communications
Commission as detailed in the following specifications:
- Part 15, Subpart B, for Class B Equipment
- FCC Docket 96-208 as it applies to Class B
- Personal computers and peripherals
The product listed above has been tested at an
External Test Laboratory certified per FCC rules and
has been found to meet the FCC, Part 15, Class B,
Emission Limits. Documentation is on file and available
from the Digi International Homologation Engineer.
Sigma Pumps Integrated 802.11abg Module
FCC ID: MCQ-50M1768
International EMC Standards
The Sigma Pumps Integrated 802.11abg Module meets
the following electromagnetic emissions standards:
- EN55022 - EN55024 - EN 300 328 - EN 301 489
- RSS 210 - VCCI - AS 3548 - RSS 210
FCC ID: MCQ-50M1768 (Sigma Pumps Integrated
802.11abg Module)
IC: 1846A-50M1768 (Sigma Pumps Integrated
802.11abg Module)
Safety Standards
OEM is responsible for safety and certification for the
host device.
The Sigma Pumps Integrated 802.11abg Module has
been tested and found to comply with the limits for
Class B digital devices pursuant to Part 15 Subpart B,
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential environment. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause
harmfulinterference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
tuning the equipment off and on, the user is
encouraged to try and correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
the receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced Radio/TV
technician for help.
Per FCC 15.407(e), the device is restricted to indoor
use in the 5.15 - 5.25 GHz band.
Labeling Requirements (FCC 15.19)
The host device must contain a label that states
“Contains FCC ID: MCQ-50M1768”.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
L'équipement doit comporter une étiquette déclarant
"Contient l'ID IC: 1846A-50M1768". Cet équipement
est conforme à la Partie 15 de la Réglementation
FCC. Son utilisation doit répondre aux deux
conditions suivantes :
(1) Cet équipement ne doit pas produire
d'interférences nocives et
(2) Cet équipement doit accepter n'importe quelle
interférence recue, y compris les interférences
susceptibles d'entraîner un fonctionnement
indésirable.
Modifications (FCC 15.21)
Changes or modifications to this equipment not
expressly approved by Digi may void the user’s
authority to operate this equipment.
Industry Canada
This digital apparatus does not exceed the Class B
limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Le present appareil numerique n'emet pas de bruits
radioelectriques depassant les limites applicables
aux appareils numeriques de la Class B prescrites
dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications
du Canada.
--IC (Industry Canada) RSS-210 Issue 8
Section 6.2.2(o)
Declaration of Conformity
(in accordance with
FCC Dockets 96-208 and 95-19)
Manufacturer's Name:
Corporate Headquarters:
Manufacturing Headquarters:
Digi International
1001 Bren Road East
Minnetonka, MN 55343
10000 West 76th Street
Eden Prairie, MN 55344
FCC Part 15 Class B
Radio Frequency Interference (RFI)
(FCC 15.105)
(1P):90001300-88 A