Digipower Dps 6000 Users Manual 2
DPS-6000 Manual DPS-6000 Manual
DPS-6000 Manual- edition DPS-6000 Manual- edition
DPS-6000 to the manual 1d95ea5a-a65e-4c58-b3c6-1be734bcef1a
2015-02-02
: Digipower Digipower-Dps-6000-Users-Manual-407454 digipower-dps-6000-users-manual-407454 digipower pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
DPS-6000 DPS-6000 is a new type of intelligent charger with a LCD display. It has -dV, Vmax, Temperature and Timer protection. The charger has 2 independent channels and 2 or 4 Ni-MH batteries (AA or AAA) can be charged at the same time. It is convenient for home or travel as a portable compact charger. AC 100-240V, 50/60Hz for adapter DC 12V,500mA for charger LCD Display Input plug for adapter Battery slot AC adapter LCD indicates the charging status Charger Indicator: 1) Charging: Battery indicator rolling from 0 to 3 (0) (2) (1) (3) 2) Charge finished: Battery indicator remains constantly on: LCD indication status Step 1. Load batteries into charger 1.This charger is designed to charge 2 or 4 AA or AAA Ni-MH rechargeable batteries. 2.If you want to charge 4 AA, or 2 AA and 2 AAA, put batteries into the charger compartments, taking care to observe polarity (+/-) as indicated inside the charger. (Fig.1) 3) Fault: Battery symbol flash (1/sec.): 4) Power on but no batteries in the charger: 5) Power off: LCD off Ni-MH rechargeable battery AA/AAA battery 2 or 4 pcs AA/AAA 2 batteries can charge at left or right 2 channels AA mini 2500mAh AAA mini 1000mAh Fig.1 Charging 4pcs of AA or AAA 3.If charging only 2 batteries at a time, place the batteries in the left or right side compartments of the charger.(Fig.2) AA*2: 1500mA 250mA AA*4: 750mA 125mA (Pulse current Imax=1.5A 250mA, 50% duty, 1s on, 1s off) AAA*2: 350mA 100mA AAA*4: 350mA 50mA (Pulse current Imax=700mA 100mA, 50% duty, 1s on, 1s off) 0-24mV/Channel Cut off temperature 11 Charging Time 12 13 14 15 16 Protection +/- polarity worng connection AA and AAA mixed Alkaline Average Trickle current Dimension Best Ambient Temperature Approval type 3.4V 100mV/Channel 47-55℃ 1 temperature sensor each Channel 120min 10% 2pcsAA 240min 10% 4pcsAA 180min 10% 2/4pcsAAA No charging current Charge as AAA battery No charging current 20-100mA 116mm(L)x75mm(W)x33.5mm(H) 20-25℃ AC Adapter: CETL Charger: FCC Fig.2 Charging 2pcs of AA or AAA Step 2. Plug in the charger 1.Connect the charger input plug with AC mains. Step 3. Charging start and LCD indication 1.The LCD battery indicator rolls to indicate batteries are being charged. The LCD battery indicator remains constantly on to indicate batteries are fully charged. 2.The LCD battery symbol flashes to indicate charger is in fault mode. 3.No LCD light indicates the charger is in default mode. 4.The LCD indicating list is as follows: No. Status of LCD Status of charger 1 Rolling Charging 2 On Full charged 3 Flashing Fault mode 4 Off Default mode Note: The charger will not supply charging current under default mode.The default mode is due to the below cases: A. No battery put inside charger B. Battery connected with reverse-polarity C. The charger has an internal failure D. Power off Step 4. End of Charging 1.When the charge time is completed, the batteries could be taken out and are ready for use. 2.Remove the charger from the AC mains. 3.Follow the process from step 1 if you want to start another charge. Note: Proposed working temperature for charger: 20 C-25 C. a) Before charging, read usage instructions. b) This charger is designed for indoor use only. Do not expose to moisture or rain. c) Please do not recharge non-rechargeable batteries. d) This charger is intended to charge AA/AAA metal-hydride (Ni-MH) batteries only. Attempting to charge any other types of batteries may cause personal injury and damage. e) This charger can charge 2 AA and 2 AAA at the same time. f ) Do not mix Alkaline/Ni-MH, or different capacity batteries together to charge. g) Remove charger from AC mains when not in use. h) Never use an extension cord or any attachment not recommended by manufacturer. Otherwise, this may result in a risk of fire, electric shock or injury to persons. i ) Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified service-man for repair. Not recommended for use by children. j ) Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire. Unplug the charger from outlet before attempting any maintenance or cleaning. k) This power unit is intended to be correctly positioned in a vertical or floor mount position. l ) For connection to a supply not in the U.S.A, use an attachment plug adapter of the proper configuration for the power outlet. m) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. n) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6f7512b8-e315-40b4-a706-095298df1e9c Mod Date--Text : �� Creation Date--Text : �� Producer : Corel PDF Engine Version 3.0.0.667 Creator Tool : CorelDRAW Modify Date : 2008:08:29 14:43:06-04:00 Metadata Date : 2008:08:29 14:43:06-04:00 Document ID : uuid:ccbe527c-0414-4e6e-837c-e7825071e426 Format : application/pdf Title : DPS-6000 Manual 2.cdr Creator : CSH Create Date : D:20080801010633 Author : CSHEXIF Metadata provided by EXIF.tools