Digital Antenna DA4000 Variable Gain RF Amplifier User Manual DA4000 User instructions jpg
Digital Antenna Inc. Variable Gain RF Amplifier DA4000 User instructions jpg
users manual
TyQicol Boot Installation omeier min. oisronce between onrenno oncl Qersons \ Cell phone Cell phone adopter coble solo serroiely l] DA4000 Alelflei 20‘ cable promoeo includes 12V With Digital Antennas cigarette lighter 500 series Cell Antennas adopter Qg lgrfigng fim 824 to 849 MHz 1851 to 1909 MHz Frequency Range Frequency Range (EMA, GSA/1] [TDMA, sew, Vorce and Date] ‘350 lo WA MHZ Frequeflcv Range Power input 0 o W [CDMA] Power Output 2 A w Power input 0 2 w PowerOutout l SW Connectors: mini-UH F female FCC ID: PZODA4000 IC: 4260A-DA4000 DIGI‘I I. 4‘- \rr-:-NNA 1m phone(954)747-7ozz - fax(954)747-7088 waw.DigitaIAntenna.com 5325 N.W.108th Avenue, Sunrise, FL 33351 Model #DA4000 DIQTVNNENNA m Cellular Amplifier User Instructions Boat Cell Am Iifier instructions 1) Place the amplifier in a suitable location in the instrument console and plug the power cord into the cigarette socket or appropriate power jack. If hard wiring to a power block, be certain that the positive lead connects to the center pin otthe amplifier power connector. 2) Instruction for mounting the antenna to the boat. It is important to use the provided cable to mount the antenna, this will allow compliance with FCC mles concerning MPE (Maximum Permissible Exposure) safety limits. Any of Digital Antenna‘s tri-mode cellular antennas may be used with the DA4000. Mount the approved marine antenna in such a location that it will be at least 6 meters from any occupant. Afier running the coaxial cable thru a suitable cable path, connect the cable to the amplifier on the end that indicates "antenna". 3) Connect one end of the cell phone adapter cable to the amplifier were it is marked "phone" and the other end to the cell phones antenna port, 4) Atter you are certain that all connections are tight and secure, move the switch labeled "on/oft" to the on position, A green light will illuminate indicating that the amplifier is ready for use, NOTE: It is normal for the amplifier to be warm during operation. This equipment has been tested and found to comply With the limits for a class B device, pursuant to Part 75 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications, However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or other electronic reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of mole of the following measures.“ 0 Reon'ent or relocate the receiving antenna 0 Increase the separation between the equipment and receiver 0 Connect to isolated power with a ground cable going directly to the battery or DC source 0 Repositioning of the coaxial cable may also eliminate interference o Consult the dealer or an experienced Electronics technician for help. Warning.“ Changes or modifications not expressly approved by Digital Antenna, lnc. could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:04:22 14:36:15-04:00 Modify Date : 2002:04:22 14:36:15-04:00 Page Count : 1 Creation Date : 2002:04:22 18:36:15Z Mod Date : 2002:04:22 18:36:15Z Producer : Acrobat Distiller 5.0 (Windows) Author : danhuynh Metadata Date : 2002:04:22 18:36:15Z Creator : danhuynh Title : DA4000 User instructions.jpgEXIF Metadata provided by EXIF.tools