Digital Concepts Portable Light Studio Ps 101 Users Manual

: Digital-Concepts Digital-Concepts-Portable-Light-Studio-Ps-101-Users-Manual-513649 digital-concepts-portable-light-studio-ps-101-users-manual-513649 digital-concepts pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Portable Light Studio
Item Number PS-101

Thank you for purchasing the PS-101 portable light studio. This studio will offer you an easy and
portable way to take high quality photos. Inside this box you will find the following contents:

CONTENTS OF BOX
ONE LIGHT BOX:
The included light box has two colored backgrounds for varying contrasts. It is designed for easy
set up, as it can be placed either on a table top, or even on your floor. The light box is made of a
specially woven, heat resistant, nylon fiber-mesh diffuser, which helps deliver uniform illumination
while eliminating unwanted glare and harsh shadows. Its dual sided background is made up of
non-reflective polyester fabric. The blue and grey backgrounds provide for contrast when
photographing either dark or light objects.
TWO HIGH OUTPUT LIGHTS:
The Portable Lighting Studio comes with two high power lamps. Each 20 watt lamp provides
even color temperature and clarity, using GU10-C light bulbs. Each lamp is supported by
retractable legs which allow for hand held use.
ONE MINI TRIPOD:
This box contains a mini tripod which can be attached to your digital camera. By using the
tripod’s extension legs and tilt head, you will be able to take photos from many different angles.
Furthermore, the tripod’s durable, sturdy legs will offer you increased stability when taking photos.
ONE BUILT IN CARRYING CASE: The built in carrying case has the perfect compact size that
will enable you to carry your Portable Lighting Studio with you when you are on the go. Its
durable nylon material case comes with pockets to hold the lights and tripod, and a sturdy handle
to make it convenient for traveling.

WARNING: PLEASE READ BEFORE USING
Please use caution when using your Portable Lighting Studio to avoid accidents, fire, or personal
injury. Follow the recommendations below in order to use this product safely and to have the
best possible photo taking experience.

 DO NOT direct the lamps at people or materials that are less than 4 inches away.

 DO NOT touch any part of the video light housing or safety glass if the light has recently
been in use. Wait until the light has been cooled.

 DO NOT touch the light bulbs with your bare fingers. Oil from your skin can cause the
bulbs to burnout. Use cloth or plastic between the bulb and your fingers when inserting
and removing bulbs.

CHANGING BULBS
The Portable Lighting Studio comes with GU10-C light bulbs. These bulbs can be purchased at
many hardware or lighting stores.
To change bulbs follow the steps below:
1. Detach the front cover from its housing by unscrewing it in a counter-clockwise motion
and then pulling it off.
2. Remove the old bulb and insert the fresh bulb into the lamp’s socket, matching pins to
socket holes.
3. Replace the front cover by screwing it on using a clockwise motion.

OPERATING THE LAMPS
In order to get the best results when using the included lamps, please follow the below steps:

1. Pull out the lamp’s retractable legs, they will automatically spread out so that they can be
used to support the lamp.
2. Place the lamp on a solid, stable surface and proceed to adjust the angle of the lamp’s
head.
3. Insert the lamp’s plug into an available AC outlet. A 110 volt outlet is required in order to
use your lamps safely.
4. To turn on your lamp, rotate the on/off switch on the lamp’s wire.

OPERATING THE LIGHT BOX
The light box that is included with your package comes folded in its portable carrying case. In
order to assemble the light box and begin using your portable lighting studio, please follow the
steps below:
1. Open the Velcro latch on the portable carrying case, and now open the carrying case.

2. The unit has three semi-opaque, fiber-mesh square pieces. Two of these, which are
attached to the unit’s carrying case, will form the left and right walls of your lighting
studio. The third, which is not connected to your unit, can be Velcroed to the top to form a
roof for your studio.
3. The dual sided background can be unrolled to provide contrast when taking photos of
light or dark objects.

SETTING UP YOUR LIGHTING STUDIO TO TAKE PHOTOS
There are many, many ways for a photographer to arrange lamps when taking photos. There are
numerous books on photography which discuss this topic in great detail. One of the basic
concepts of lighting techniques involves three point lighting.
Three-point lighting is a very common lighting technique used when taking photos with digital and
35mm film cameras. By using three separate light sources, the photographer can illuminate the
shot's subject however desired, while also controlling (or eliminating entirely) the shading and
shadows produced by direct lighting.
The key light, as the name suggests, shines directly upon the subject and serves as its principal
illuminator; more than anything else, the strength, color and angle of the key determines the
shot's overall lighting design.
In indoor shots, the key is commonly a specialized lamp, or a camera's flash. In outdoor daytime
shots, the Sun itself often serves as the key light. In this case, of course, the photographer cannot
set the light in the exact position he or she wants, so instead arranges the subjects to best
capture the sunlight, perhaps after waiting for the sun to position itself just right.
The fill light also shines on the subject, but from a side angle relative to the key. It balances the
key by illuminating shaded surfaces, and lessening or eliminating chiaroscuro* effects, such as
the shadow cast by a person's nose upon the rest of the face. It is usually softer and less bright
than the key light (up to half), and more to a flood. Not using a fill at all can result in stark
contrasts (due to shadows) across the subject's surface, depending upon the key light's
harshness. Sometimes, as in low-key lighting, this is a deliberate effect, but shots intended to
look more natural and less stylistic require a fill.
In some situations a photographer can use a reflector (such as the colored backgrounds of your
light box) as a fill light instead of an actual lamp. Reflecting and redirecting the key light's rays
back upon the subject from a different angle can cause a softer, subtler effect than using another
lamp.
The back light (a.k.a. the rim, hair or shoulder light') shines on the subject from behind, often (but
not necessarily) to one side or the other. It gives the subject a rim of light, serving to separate the
subject from the background and highlighting contours.
Back light or rim light is different from a kick in that a kick (or kicker) contributes to a portion of the
shading on the visible surface of the subject, while a rim light only creates a thin outline around
the subject without necessarily hitting the front (visible) surface of the subject at all.
*An element in art, chiaroscuro (Italian for lightdark) is defined as a bold contrast between light and dark. Chiaroscuro is
also used in cinematography to indicate extreme low-key lighting to create distinct areas of light and darkness in films,
especially in black and white films.

NOTES
1. Always store this unit in dry places.
2. To minimize shadows, point light down at your subject. This will cause shadows to fall
beneath rather than behind the subject.
3. For a softer effect, point the video light up, letting illumination bounce back into the
subject.

ORDERING ADDITIONAL PARTS AND ACCESSORIES
If at any point you need to replace the GU10-C light bulbs that come with this unit, these bulbs
can be purchased at many hardware or lighting stores. You can also order these bulbs from us.
Also, if you would like an extra background for your light box, a double sided, black and white
background is available. To order, please fill out the order form below and send it, along with a
check endorsed to Sakar International to:
Sakar International
Portable Lighting Studio Offer
195 Carter Drive
Edison, NJ 08817

Product
Item Number
Quantity
GU10-C Light Bulb ….. PS-101-Bulb…….. _______
Black/White Screen …..PS-101-BW…..…..._______

x
x

Price
$9.95 =
$9.95 =

TOTAL
_______
_______
+ $3.00 (s&h)
Total____________

You can expect your power adapter to arrive within two weeks of receipt of your order. Email all
of your order inquiries to sales@sakar.com.

TECHNICAL SUPPORT
For questions regarding customer service issues such as missing parts, where and how to obtain
warranty service and general questions please email us at support@sakar.com. If you are
experiencing problems installing your product and require immediate assistance, please call our
technical support hot line at (877)397-8200.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Title                           : 
Author                          : gglick
Creator                         : Writer
Producer                        : OpenOffice.org 2.1
Create Date                     : 2007:02:22 09:33:22-05:00

EXIF Metadata provided by EXIF.tools