Digital Device DPX-4210 PDP Monitor User Manual

Digital Device Inc. PDP Monitor

Users Manual

8VHUV0DQXDO3'379021,725
Please read this manual carefully before using your plasma TV and keep the manual handy for future reference.CAUTIONRISK OF ELECTRICALSHOCK, DO NOT OPENTO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.WarningTO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'SPOLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAINFROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Warning:Still image (immovable) screen may cause permanent damage to PDP.1) Lengthy displayed still images from Video games, banners, graphics and others may fatally damage the screen.2) When using the PDP in 4:3 formats with sidebars for a long period of time, it may cause damage to the plasma panel.It is recommended that you use 16:9 or other formats.(Image Sticking can be avoided by using "Panel" function of the Setting'ssub menu. However, once image sticking occurs, it may not disappear completely. An image will be dimmed as the image isdisplayed long time or repeatedly)Any damage to the PDP caused by improper usage (such as image sticking) shall not be covered by the warranty.The lightning flash with the arrowhead symbol, within an equilateral triangle, isintended to alert the user to the presence of uninsulated "dangerous voltage"within the product's enclosure that may be of sufficient magnitude to constitute anelectric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user tothe presence of important operating and maintenance (servicing) instructions in theliterature accompanying the appliance.02WARNING
03SAFTY INSTRUCTIONSImportant safeguard for you and your new productYour product has been manufactured and tested with your safety in mind. However, improper use canresult in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been builtinto your new product, please read and observe the following safety points when installing and usingyour new product, and save them for future reference.Observing the simple precautions discussed in this booklet can help you get many years of enjoyment andsafe operation that are built into your new product.1. Read InstructionsAll the safety and operating instructionsshould be read before the product is operated.2. Follow InstructionsAll operating and use instructions should befollowed.3. Retain InstructionsThe safety and operating instructions should beretained for future reference.4. Heed WarningsAll warnings on the product and in the operatinginstructions should be adhered to.5. Water and MoistureDo not use this product near water, forexample, near a bath tub, wash bowl, kitchensink, or laundry tub, in a wet basement, or near aswimming pool.6. Accessories, Carts, and StandsDo not place this product on a slippery or tiltedsurface, or on an unstable cart, stand, tripod,bracket, or table.The product may slide or fall, causing seriousinjury to a child or adult, and serious damage tothe product.Use only with a cart, stand, tripod, bracket,or table recommended by the manufacturer,or sold with the product. Any mounting ofthe product should follow the manufacturer'sinstructions, and should use a mounting accessoryrecommended by the manufacturer.7. Transporting ProductA product and cart combinationshould be moved with care.Quick stops, excessiveforce, and uneven surfacesmay cause the productand cart combination to overturn.8. AttachmentsDo not use attachments not recommended bythe product manufacturer as they may causehazards.9. VentilationSlots and openings in the cabinet are provided forventilation and to ensure reliable operation of theproduct and to protect it from overheating, andthese openings must not be blocked or covered.The openings should never be blocked by placingthe product on a bed, sofa, rug, or other similarsurface. This product should not be placed in abuilt-in installation such as a bookcase or rackunless proper ventilation is provided or themanufacturer's instructions have been adheredto.10. Power SourcesThis product should be operated only from thetype of power source indicated on the markinglabel. If you are not sure of the type of powersupply to your home, consult your product dealeror local power company.For products intended to operate from batterypower, or other sources, refer to the operatinginstructions.PORTABLE CART WARNING
04SAFTY INSTRUCTIONS< Safety Instructions continued >11. Outdoor Antenna GroundingIf an outside antenna or cable system isconnected to the product, be sure the antennaor cable system is grounded so as to providesome protection against voltage surges andbuilt-up static charges.12. LightningFor added protection for this product (receiver)during a lightning storm, or when it is leftunattended and unused for long periods oftime, unplug it from the wall outlet anddisconnect the antenna or cable system.This will prevent damage to the product due tolightning and power-line surges.13. Power LinesAn outside antenna system should not belocated in the vicinity of overhead power linesor other electric light or power circuits, or whereit can fall into such power lines or circuits. Wheninstalling an outside antenna system, extremecare should be taken to keep from touchingsuch power lines or circuits as contact withthem might be fatal.14. OverloadingDo not overload wall outlets and extensioncords as this can result in a risk of fire or electricshock.14. HeatThe product should be situated away from heatsources such as radiators, heat registers, stoves,or other products (including amplifiers) thatproduce heat.15. CleaningUnplug this product from the wall outlet beforecleaning. Do not use liquid cleaners or aerosolcleaners. Use a dry cloth for cleaning.16. ServicingDo not attempt to service this product yourselfas opening or removing covers may expose youto dangerous voltage or other hazards.Refer all servicing to qualified service personnel.17. Damage Requiring ServiceUnplug this product from the wall outlet and referservicing to qualified service personnel under thefollowing conditions:Example of antenna groundingAs per national electrical codeAntenna lead in wireAntenna dischargeunitGrounding conductorsGround clampsPower servicegroundingElectrode systemElectric serviceequipmentGround clamp- When the power-supply cord or plug is damaged.- If liquid has been spilled, or objects have fallen intothe product.- If the product has been exposed to rain or water.- If the product does not operate normally by followingthe operating instructions. Adjust only those controlsthat are covered by the operating instructions as animproper adjustment of other controls may result indamage and will often require extensive work by aqualified technician to restore the product to its normaloperation.- If the product has been dropped or the cabinet hasbeen damaged in any way.- When the product exhibits a distinct change inperformance.
06FEATURES & PACKAGE1. Features and Package1.1 FeaturesVarious Input signals- The display has a two tuner to input televisionRF signal (Only TV model), you can view twodifferent channels at the same time.- In additional to Video, S-VHS, SCART RGB,Component, Analog RGB(D-sub 15Pin) andDigital RGB(DVI) signals,- Depending on the model, the display supportvideo input for different color television systemas follow: NTSC, PAL, SECAM, PAL-N, PAL-M,PAL-60, NTSC4.43.- The display has a Component Video inputterminal to receive signals, including 480i, 480p,720p and 1080i.- The display has an RGB (Analog and Digital)input terminal to receive signal, including VGA,SVGA, XGA and SXGA.Intelligent Window- The display perform High quality videoenhancement as follow: Noise reduction,Motion adaptive de-interlacing, DigitalColor/Luminance Transient Improvement, FilmMode Detection.- PIP (Picture in Picture) & Double screenfunction- Selectable Aspect Ratio(16:9, 4:3, Panorama, Zoom1/2)- Zoom-in- Freeze PicturePowerful and easy function- Menu driven On Screen Display (OSD) for allfunctions.- 10 countries Language OSD- IR Remote control for all functions- 1 User's Manual - 1 Remote control - 2 "AAA"size batteries- AV cable (1 RCA Cable, 1 RGB Cable) - 1 AC power cord* Optional Accessary :Speaker, Stand Unit, Wall Mount Bracket* Operating position: Table top or Desk TopUser's ManualGGG- 1 Plasma TV setPPOOWWEERRMMUUTTEEVVIIDDEEOO11VVIIDDEEOO22DDVVDDRRGGBBDDVVIIHHDD//DDVVDDTTVVRREECCAALLLLAAUUTTOOSSTTIILLLLSSTTEERREEOOSSLLEEEEPPSSCCRREEEENNTTEEXXTTMMEENNUU??CCHHVVOOLL++__PPrreevv..CCHHAADDDD//DDEELLPPIIPPOONN//OOFFFFSSWWAAPPTTWWIINNPPIICCCCHH++PPOOSSIITTIIOONNPPIIPPAAVVAAUUDDIIOOCCHH--PPIICCTTUURREESSOOUUNNDDZZOOOOMM++ZZOOOOMM--SSEELL1111??112233445566778899110000001.2 Package Contents
07)/$%&).)4)/.3)/$EFINITIONS&RONT0ANEL#ONTROLSྙG-AIN0OWER/./&&0RESSTOTURNON3TANDBY-ODEANDOFFྚG3TANDBY0OWER/.0RESSTOTURNON/PERATION-ODEANDOFFྛG6OLUME50$/7.0RESSTOINCREASEANDDECREASETHEVOLUMEྜG#HANNEL50$/7.0RESSTOCHANGETHECHANNELAT46MODEྜྷG!60RESSTOSELECTALLAVAILABLESOURCE4636(36IDEO6IDEO!NALOG2'"$IGITAL2'"#OMPONENT#OMPONENTྞG0OWER)NDICATOR2EDCOLOR3TANDBYMODE'REENCOLOR/PERATIONMODEྟG)22ECEIVERG2EAR#ABINET)/gSྙ!#0OWER)NPUTྚ$IGITAL2'"$6)))NPUTྛ!NALOG2'"$SUBPIN#ONNECTOR)NPUTྜ$IGITAL2'"!NALOG2'"!UDIO)NPUTྜྷ#OMPONENT6IDEOI^I)NPUTྞ#OMPONENT,INE,EVEL!UDIO)NPUTྟ36(3)NPUTྠ6IDEO)NPUT,INE,EVEL!UDIO)NPUTྡ"UILTIN3PEAKER3WITCHྡྷ3#!24)NPUT/UTPUT0!,3%#!-OPTION6IDEO)NPUT,INE,EVEL!UDIO)NPUT.43#OPTIONྣ-ONITOR#OMPOSITE6IDEO/UTPUT,INE,EVEL!UDIO/UTPUTྤ)22EMOTE#ONTROL7IRED2EMOTE#ONTROLOPTIONྥ23#0ORTྦ3PEAKER/UTPUT,EFT2IGHTྦྷ2&46CONNECTORFORANTENNA)NPUTOPTION;.OTE=3EEPAGEFORAVAILABLE!6)NPUT/UTPUT4ERMINALྜྷGGGGGྜGGGGGGGྛGGGGGGྚGGGGྙྟGྞྦྦྷINCH(+)( - )ྙྚྜྜྷྞྟྡྷྤྥྦྦྷINCH(+)( - )21 2))%8,/7,163($.(5sGGGGGyྚྛྜྜྷྞྟྠྣྠྣྡྷྡྥྤ75R15R30INCH2EAR#ABINETDRAWINGྛ
08FEATURES & PACKAGEInstalling the batteries in the remote control unit.To Remove cover, Slide out-wards while pressing down.Place two batteries in the remotecontrol, then close the cover.CAUTIONRisk of explosion if battery is replaced by anincorrect type. Dispose of used batteriesaccording to the instructions.3. Remote Control3.1 Remote Control Basic ̺POWER : Switchs the TV between ON and Standby.̻Number & Prev.CH ButtonNumber Buttons : Used to enter channels selected.Prev. CH : Selects the previous channel.̼Layout Control ButtonsPIP : PIP mode On/OFFTWIN PIC : Double window mode ON/OFFSWAP : Interchange the main and the sub sourcePOSITION : Location selection of sub pictureSIZE : Size selection of sub picture̽Menu Control ButtonsMenu : Displays the on-screen menu.TV Menu : Displays the TV menu screen.LANG : Changes the language of on-screen menu.SEL : Select to the desired menu item.Curser Buttons : Control the cursor in the menu.̾CHANNEL & Volume ButtonsCH ¦/¤: Select the DOWN/UP Channel.VOLUME -/+ : Increases/Decreases sound level.̿AV Source Selection ButtonsDirectly Source Selection ButtonsSOURCE : Toggle source selectionྙྚྛྜྜྷWhen handling the remote control unit.- Do not drop or shake the remote control.- Do not use the remote control unit in a locationsubject todirect sunlight, heat radiation from aheater, or in a placesubject to excessive humidity.- When the remote control units batteries beginto wear out,the operable distance will graduallybecome shorter. Whenthis occurs, replace allbatteries with new ones as soon aspossible.ྞ----->32:(5 087(AnalogRGB VIDEO1 COMPONENT1 TVDigitalRGB VIDEO2 COMPONENT12 S-VHS6(/11?i 35(9&+3,36:$3326,7,216,=(7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(18&+ 92/16SLEEP RECALL AUTO SOURCE----->----->----->----->----->͑͑͑͜͞
09REMOTE CONTROL3. Remote Control3.1 Remote Control Basic ཿTEXT : Selects TELETEXT mode.See the page 24 in which the teletext function buttonis explained in detail.ྀADD/DEL:Memories or Deletes the selected channel.ཱྀSLEEP : Sets the sleep timer.ྂRECALL : Displays the setting status of PDP.ྃAUTO : Optimizes the picture at Componentand RGB mode.྄MUTE : Switches the sound on or off.྅Screen Control ButtonsSCREEN : Adjusts the size of the screen.(16:9, 4:3 etc.)ZOOM : Enlarges or reduces the picture size.STILL : Still the picture.PICTURE : Selects the picture mode selection.(User-Soft-Dark-Bright)྆Sound Control ButtonsSOUND : Selects the sound mode. (User- Movie-Music-News)STEREO : Selects the MONO, STEREO or SAPmode at TV.3.2 Wired Remote ControlྙConnect as the drawing shown.ྚPower on.[Note] IR Remote Controller is not included inthe product package.CAUTIONIR Remote Jack is not sound jack.Do not connect with any sound source̡̠̥----->----->----->----->̦----->̧32:(5 087(AnalogRGB VIDEO1 COMPONENT1 TVDigitalRGB VIDEO2 COMPONENT12 S-VHS6(/11?i 35(9&+3,36:$3326,7,216,=(7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(18&+ 92/16SLEEP RECALL AUTO SOURCE11?i7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(18IR Rmote Remote control̢ ̣̤͑͑͑͜͞
10INSTALLATION4. Installation!6)NPUT/UTPUT4ERMINAL($!6)NPUT/UTPUT4ERMINAL46v!6)NPUT/UTPUT4ERMINAL46#ONNECTION46ྙ#ONNECTASTHEDRAWINGSHOWNྚ0OWERONྛ0RESSTHE;46=BUTTON;.OTE=)NAPOORSIGNALAREAPURCHASEANDINSTALLASIGNALAMPLIFIERFORBETTERQUALITY#OAXIAL#ABLEISNOTINCLUDEDINTHEPRODUCTPACKAGE46WITH#ABLE463ETTOP"OX#ONNECTIONྙ 3ELECT  OR  WITH CHANNEL SWITCH ON CABLEBOXྚG 4UNE THE 46 CHANNEL TO THE SAME SELECTEDOUTPUTCHANNELOFCABLEBOXྛ3ELECTCHANNELSAT THECABLEBOXORWITHTHECABLEBOXREMOTECONTROL).054#ONNECTIONྙ#ONNECTTHEAUDIOANDVIDEOCABLESFROMTHECABLEBOXgSOUTPUTJACKSTOTHE46INPUTJACKSASSHOWNINTHEFIGUREྚ0RESSTHE6IDEOORྛ3ELECT CHANNELS WITH THE CABLE BOX REMOTECONTROL237,212))21%8,/7,163($.(5k}pOwP k}pVyniOzPyniOwPjvtwvulu{XOwPGjvtwvulu{XOzPjvtwvulu{YOwPGjvtwvulu{YOzPGGGGGGwGGGGGGwGGGGGGsGGGGGGyGGGGGGwGGGGGGwGGGGGGsGGGGGGyzT}oz}pklvXtvup{vyGv|{}GGGGGGGsGGGGGGGy}GGGGGGGsGGGGGGGyzjhy{V}pklvYOvw{pvuP pyGyltv{lyzTYZYjzwlhrlyv|{sGGGGGyhu{Gpuw|{}GGGGGGGsGGGGGGGyzjhy{V}pklvYOvw{pvuP}GGGGGGGsGGGGGGGyk}pOwP k}pVyniOzPyniOwPjvtwvulu{XOwPGGGGjvtwvulu{XOzPjvtwvulu{YOwPGGGGjvtwvulu{YOzPGGGGGGGGwGGGGGGGGwGGGGGGGGsGGGGGGGGyGGGGGGGGwGGGGGGGGwGGGGGGGGsGGGGGGGGyzT}oz}pklvXtvup{vyGv|{}GGGGGGGsGGGGGGGy}GGGGGGGsGGGGGGGypyGyltv{lyzTYZYjzwlhrlyv|{sGGGGGyhu{Gpuw|{hjGwv~lyCoaxial CableANT INPUT
11INSTALLATION4. Installation4.2.3) Video1/2ྙConnect as the drawing shown.ྚPower on.ྛPress the [VIDEO1]/[VIDEO2] button.- When connecting the TV to externalequipment, match the jack colors (Video=yellow, Audio Left = white, and Audio Right =red).- To avoid picture noise (interference), leave anadequate distance between the External VideoEquipment and TV.- Use the ISM Method of Panel Function Menuto avoid having a fixed image remain on thescreen for a long time. Typically a frozen stillpicture from a VCR. If the LetterBox pictureformat is used, the fixed image may remainvisible on the screen.4.2.4) S-VHSྙConnect as the drawing shown.ྚPower on.ྛPress the [S-VHS] button.[Caution]Audio input must be connected with [Video1].[Note]S-VHS cable is not included in the product package.4.2.5) SCART connection̺Connect as the drawing shown.̻Power on.̼Press the [VIDEO2] button.[Caution]1. Do not use Scart and video2 port simultaneously.2. Connected devices will not display properly in caseboth Scart and Video 2 ports are connected.3. Mode switching between Scart-RGB and Scart-Composite is done automatically.[Note] SCART cable is not included in theproduct package.S-VHS OUTPUTVCRRLVRLAUDIO Cable(MONO)VIDEO1S-VHS CableS-VHSSCART I/O SCART I/OVCRSCART CableRLVVIDEO2VIDEO1RLVVideo CableAudio Cable(MONO)COMPOSITE VIDEO OUTVCRYXX` XYYWYXYYWXX`At the Video/TV At the CableSCART PIN DescriptionPin12345678910NameAORAIRAOLAGNDBGNDAILBSWITCHG GNDCLKOUTDescriptionAudio Out RightAudio In RightAudio Out Left + MonoAudio GroundRGB Ble GroundAudio Left + MonoRGB Blue InAudio/RGB Switch/16:9RGB Green GroundPin11121314151617181920NameGDATAR GNDDATAGNDRBLNKVGNDBLNKGNDVOUTVINDescriptionRGB Green InRGB Red GroundData GroundRGB Red InComposite Video GroundBlanking Signal GroundComposite Video OutComposite Video In21 SHIELD Ground/shield(Chassis)
12INSTALLATION4. Installation4.2.6) Analog RGBྙConnect as the drawing shown.ྚPower on.ྛPress the [ANALOG RGB] button.4.2.7) Digital RGB̺Connect as the drawing shown.̻Power on.̼Press the [DIGITAL RGB] button.G* The table below shows all of the display modes that are supported.CautionThere is only one Stereo Phone Jack forAnalog RGB and Digital RGB. Only one Soundsource is available at the same time.[Note] DVI jack not support HDMI.DVI Cable and Phone Cable is not includedin the product package.RGB(P)COMPUTERRGB(S)RGB(P)RGB(S)DVI(S) DVI(S)COMPUTERRGB(S) RGB(S)DVI(P) DVI(P)DVI(S) DVI(S)̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺̺640x350640x440720x400640x480800x6001024x7681152x8641280x9601280x10248585856072758556607275857537.937.937.931.537.937.543.335.137.948.146.953.780posnegnegnegnegnegnegposposposposposposnegposposnegnegnegnegposposposposposposStandardStandardStandardInd standardStandartStandardStandardGuidelineGuidlineStandardStandardStandardStandard60707585906070756075607548.456.56068.767.56085.96480negnegposposposposposposposnegnegposposposposposposposGuidelineStandardStandardStandardStandardStandardStandardStandardStandardRGBDVIResolution(Pixel)VertRefresh(Hz)H Freq(KHz)H SyncPolarityV SyncPolarity CommentRGBDVIResolution(Pixel)VertRefresh(Hz)H Freq(KHz)H SyncPolarityV SyncPolarity Comment
13INSTALLATION4. Installation4.2.8) COMPONENT 1/2 Video̺Connect as the drawing shown.̻Power on.̼Press the [COMPONENT1]/[COMPONENT2]button.4.2.9) MONITOR output̺Connect as the drawing shown.̻Power on.[CAUTION]Monitor output can view [TV]/[VIDEO1]/[VIDEO2].4.2.10) Speaker outྙPower off.ྚConnect as the drawing shown.ྛPower on.ྜAdjusting audio setting.GVIDEO CableCOMPOSITE VIDEO INPUTVCRPr Pb YComponent Video Cable(MONO)COMPONENT VIDEO OUTInterlaced DVD, Progressive DVD, Settop BoxComponent 1Component 2RLRLAudio Cable(MONO)SOUND OUTComponent 1 Sound InputComponent 1 Sound InputPr Pb YSPEAKER OUT(-)(+)LRSPEAKERMonitor OutRL V(MONO)AUDIO CableVL R
14BASIC OPERATION5. Basic Operation5.1.2) Manual Channel Memory at NTSCFollow these steps for setting the ChannelMemory manually:ྙSelect the channel by pressing the numberbutton(s).ྚGPress the [TV MENU] button.ྛSelect [Auto Fine Tune] by using the [¤/¦]button.̽Select [Off] by using the [ඔ/ඖ] button.ྜྷSelect [Fine Tune] by using the [̵/̷] button.ྞPress the [ඔ/ඖ] button for the tuningadjustment.ྟSelect [Channel] by using the [̵/̷] button.ྠSelect [Add] or [Remove] by pressing the [ඔ/ඖ] button.ྡPress the [Menu] button to exit the ChannelMemory setting.If the [Auto Fine Tune] mode would be set [On],[Fine Tune] mode should not be adjusted.[Note] HRC and IRC are two special NTSC cablestandards in the US.5.1 TV Channel Memory5.1.1) Auto Channel MemoryFollow these steps for setting the ChannelMemory automatically:ྙPress the [TV MENU] button.ྚSelect [Source] by using the [̵/̷] button.ྛSelect TV signal input mode by pressing the[ඔ/ඖ] button.ྜSelect [Auto Memory] by using the [̵/̷]button.ྜྷPress the [ඖ] button to start the channelsearch.If you want to stop auto memory, press the[MENU] button. Only the channels searched upto that time are memorized.6(/i$'''(//$1*790(180(18TuningAuto MemoryAAAAChannelEdit LabelsAuto Fine TuneFine TuneSourceRegionMoveAdd Remove-12-Select AdjustSEL MENUMENUCancelMENUOff OnAirUSAiChannel Searching...
/(6i  8 1(081(097*1$//('''$15BASIC OPERATION5. Basic Operation-ANUAL#HANNEL-EMORYAT0!,-ODE&OLLOWTHESESTEPSFORSETTINGTHE#HANNEL-EMORYMANUALLYྙ3ELECTTHECHANNELWHICHYOUWANTTOSTARTMANUALTUNINGྚ0RESSTHE;46-%.5=BUTTONྛ3ELECT;-ANUAL3EARCH=BYUSINGTHE;̵̷=BUTTONྜ0RESSTHE;ඖ=BUTTONTOSEARCHTHENEXTCHANNELྜྷG3ELECT;0ROGRAM4ABLE=BYUSINGTHE;̷̵ඔඖ=BUTTONྞ0RESSTHE;=BUTTONTOSELECT3AVEMODEྟ0RESSTHE;-ENU=BUTTONTOEXITTHE-ANUAL3EARCHSETTING463YSTEM0!,4HISSETTINGISMAINLYUSEDIN%UROPEAN#OUNTRIESANDINCLUDES0!,3%#!-"'()$+0!,3%#!-4HISSETTINGISMAINLYUSEDIN&2!.#%ANDINCLUDES0!,3%#!-,,g"'()$+%DITING0ROGRAM3TEP3ELECTION0ROGRAM4ABLE̺0RESSTHE;46-%.5=BUTTON̻ 3ELECT ;0ROGRAM 4ABLE= BY USING THE ;¤¦=BUTTON̼ 0RESS THE ;Ù= BUTTON TO SEARCH THE NEXTCHANNEL3TEP%DITING0ROGRAM!$ELETE̺ 3ELECT THE DELETING CHANNEL BY USING THECURSORBUTTONS̻0RESSTHE;=BUTTONTODELETECHANNEL"#HANGE̺ 3ELECT THE CHANGING CHANNEL BY USING THECURSORBUTTONS̻ 0RESS THE ;    = BUTTON TO SELECT CHANNELCHANGINGMODE̼ 3ELECT THE CHANGING CHANNEL POSITION BYUSINGTHECURSORBUTTONS#2ENAME̺ 3ELECT THE CHANNEL BY USING THE CURSORBUTTONS̻0RESSTHE;=BUTTONTOSELECT2ENAMEMODE̼2ENAME THE CHANNEL BY USING THE CURSORBUTTONS$3AVEྙ3ELECTTHESAVINGCHANNELBYUSINGTHECURSORBUTTONSྚ0RESSTHE;=BUTTONTOSAVECHANNELTuning$XWR0HPRU\AA0DQXDO6HDUFK3URJUDP7DEOH)LQH7XQH(GLW/DEHOV796\VWHPMove3$/Select AdjustSEL MENUMENUDeleteCancelMENUiChannel Searching...Change Rename Save1 -----2 -----3 -----4 -----5 -----6 -----7 -----8 -----9 -----10 -----11 -----12 -----13 -----14 -----15 -----16 -----17 -----18 -----19 -----20 -----21 -----22 -----23 -----24 -----25 -----26 -----27 -----28 -----29 -----30 -----
16BASIC OPERATION5. Basic Operation5.2 Picture Control5.2.1) At Full Screen ModeFollow these steps to adjust the Picture at FullScreen Mode:ྙPress the [MENU] button.ྚPSelect the [Picture] mode by using the [ඔ/ඖ] button.ྛMove the desired mode by using the [̵/̷]button.ྜPress the [ඔඖ] button for a adjusting thepicture.ྜྷPress the [MENU] button to exit theadjustment menu.5.2.2) At PIP or Twin Screen ModeFollow these steps to adjust the Picture at PIP orTwin Screen ModeྙSelect the adjusting picture's layer by using [̵/̷] button.ྚPress the [MENU] button.ྛMove the desired mode by using the [̵/̷]button.ྜPress the [ඔ/ඖ] button for a adjusting thepicture.ྜྷPress the [MENU] button to exit theadjustment menuConventional FunctionPicture ModePress the [PICTURE] button or Selection [PictureMode] at MENU.You can select the desire mode. (Soft, Bright,Dark, User)[Note] If the Picutre Mode would not be setUser, Brightness and Contrast should not beadjusted.Calibration ModeCorrects the picture balance at Component 1/2.You can select the desire preset.TV, Video 1/2S-VHS, SRGB Component 1/2 Analog RGB Digital RGBPicture ModeBrightnessContrastSharpnessColorTiintPhaseFrequency̺̺̺̺̺̺TT̺̺̺̺̺̺̺̺̺̺̺̺TT̺̺̺̺̺̺TTTT* Picture menu aredifferent to eachinput sourcemode. You can seethe difference atright chart.6(/i$'''(//$1*790(180(18Move Select AdjustSEL MENUMENUPictureBrightnessContrastSharpnessColorTint-12--12--12--12--12-Picture Modesoft
17BASIC OPERATION5. Basic Operation5.3 Screen5.3.1) At Full Screen ModeFollow these steps below to set Screen Menu:ྙPress the [MENU] button.ྚSelect the desired mode using the [ඔ/ඖ]/[̵/̷] button.ྛPress the [̵/̷] button to select the desiredmenu.ྜPress the [ඔ/ඖ] button to adjust the desiredmenu.ྜྷPress the [MENU] button to exit theadjustment menu.5.3.2) At PIP or Twin Screen ModeFollow these steps to adjust the Picture at PIP orTwin Screen ModeྙSelect the adjusting picture's layer by using [̵/̷] button.ྚPress the [MENU] button.ྛMove the desired mode by using the [̵/̷]button.ྜPress the [ඔ/ඖ] button for a adjusting thepicture.ྜྷPress the [MENU] button to exit theadjustment menu.Conventional FunctionImage SizeThis function allows to adjust the aspect ratio ofthe screen, Press the [SCREEN] button orSelection [Image Size] at MENU.PIP SizeThis function allows to adjust the size of the pipscreen, Press the [SIZE] button or Selection [PIPSize] at MENUPIP PositionThis function allows to adjust the size of the pipposition, Press the [POSITION] button orSelection [PIP Position] at MENUZoomThis function allows to enlarge or reduce thepicture size, Press the [ZOOM] button orSelection [Zoom] at MENU.Press the [Curser]/[SEL] buttons to adjust thezoom ratio or position.Zoom menuMove menu6(/i$'''(//$1*790(180(18Move Select AdjustSEL MENUMENUPictureImage SizeH positionV positionFreeze WindowZoomColor Tempfill alloff on5500K 6500K 7500K 8500K+-12--12-Screen
18BASIC OPERATION5. Basic Operation5.4 Sound Control5.4.1) Sound ControlFollow these steps to adjust the Sound:ྙPress the [MENU] button.ྚSelect the [Audio] mode by using the [ඔ/ඖ]button.ྛMove the desired mode by using the [̵/̷]button.ྜPress the [ඔ/ඖ] button for a adjusting thepicture.ྜྷPress the [MENU] button to exit theadjustment menu.Bass: Changes the level of low frequency sound.Treble: Changes the level of high frequency sound.Balance: Changes the balabce of the left and rightchannels.5.4.2) At Equalizer modeFollow these steps to adjust the Equalizer Mode:ྙSelect the User mode by using the [ඔ/ඖ]button.ྚPress the [̵/̷] button to select the desiredmenu.ྛPress the [ඔ/ඖ] button to adjust the desiredmenu.ྜPress the [MENU] button to exit.*Note : When the change sound mode, off theBass and Treble values. If the Sound modewould not be set User, Equalizer should not beadjusted.Conventional FunctionSound ModePress the [SOUND] button or Selection [SoundMode] at MENUYou can select the desire mode. (User, News,Movie, Music)6(/i$'''(//$1*790(180(18Move Select AdjustSEL MENUMENUPictureVolumeMuteSound ModeBassTre bleBalance-12--12--12--12-AudioOff OnSound Mode120Hz500Hz1.5kHz-12--12--12-User5kHz-12-10kHz-12-Sound ModeUserAdjust MENUMENU
19BASIC OPERATION5. Basic Operation5.5 Setting5.5.1) SettingFollow these steps to adjust the Setting:ྙPress the [ MENU].ྚSelect the desired mode by using the [ඔ/ඖ]/[̵/̷] button.ྛPress the [̵/̷] button to select the desiredmenu.ྜPress the [ඔ/ඖ] button to adjust thedesired menu.ྜྷPress the [MENU] button to exit.Tuning( TV mode Only): See the 14 ~ 15 page.Contents Blocking (NTSC system only):This menu automatically locks out programsthat are deemed inappropriate for children. Seethe 25 page.5.5.2) Input SourceSelect desire Input Source by using the [ඔ/ඖ]/[̵/̷] button:5.5.3) Panel FunctionSelect desire Panel function by using the [ඔ/ඖ]/[̵/̷] button.Gamma : Select desire gamma mode. (Mode1,Mode2, Mode3, mode4) Please use followfunctions to prevent image sticking.ISM (Image Sticking Minimization mode): When the fixed patterns are displayed for along time, the brightness will be reducedgradually.Pixel Shift : This function scrolls the screenautomatically.Inverse Image : This function inverts the screen.6(/i$'''(//$1*790(180(18Move Select AdjustSEL MENUMENUPictureTuningInput SourceContent BlockingPanelSettingMove Select AdjustSEL MENUMENUPictureGammaISMPixel ShiftInverse ImagePanelMove Select AdjustSEL MENUMENUPictureInput SourceAnalog RGBDigital RGBTVS-VHSVideo1Video2Component1Component2AAMode1OffOffOff
20BASIC OPERATION5. Basic Operation5.6 Layout Control5.6.1) SettingFollow these steps below to set Screen LayoutMenu:ྙPress the [ MENU].ྚMove to the Layout by using the [ඔ/ඖ]button.ྛMove to desired mode by pressing the [̵/̷] button.ྜPress the [ඖ] button to select the desiredmode.5.6.2) Layer DescriptionFull ScreenYou can view full screen by select this menuPIPYou can view large and small screen at the sametime by select this menuTwin ScreenYou can view 1:1 screen at the same time by5.6.3) PIP and Twin Screen ControlSelect desire Input Source by using the [ඔ/ඖ]/[̵/̷] button:Input Source SelectionྙSelect the changing picture's layer by using [̵/̷] button.ྚSelect the Source by using the SourceSelection Buttons.Selecting Speaker outSelect the changing picture's layer by using [ඔ/ඖ button.Swaping the sourcePress the [SWAP] button.Possible PIP ModeThis Chart describe possible PIP or Twin PICmode.6(/i$'''(//$1*790(180(18Move Select AdjustSEL MENUMENULayoutFull ScreenPIPTwin ScreenPicture2Picture1TV Video1 Video2 S-video Component1 Component2 AnalogRGB Digital RGBTVVideo1Video2S-VideoComponent1Component2Analog RGBDigital RGB
21BASIC OPERATION5. Basic Operation5.6.3) PIP ModesWatching PIP ScreenPress the [PIP ON/OFF] button.Selecting PictureSelect the Picture1/Picture2 by pressing [̵/̷]buttons.Changing the sizePress the [SIZE] button and Adjust by pressing [ඔඖ] button.Change the screen2 positionPress the [POSITON] button and Adjust bypressing [ඔඖ] button.Twin PICPress the [Twin PIC] button.SwappingPress the [SWAP] button.Picture2Picture1Picture2Picture1Picture2Picture1Picture2Picture1Picture2 Picture1Picture1 Picture2
22BASIC OPERATION5. Basic Operation/PTIONS#APTION/3$3ETTING&OLLOWTHESESTEPSFORSETTINGTHE/3$ྙ0RESSTHE;-%.5=BUTTONྚ3ELECTTHE;/PTION=MODEBYUSINGTHE;ඔඖ=BUTTONྛ-OVETOTHESETTING/3$&UNCTIONBYPRESSINGTHE;̵̷=BUTTONྜ3ELECTTHEDESIREDMODEBYUSINGPRESSINGTHE;ඔඖ=BUTTONྜྷ0RESSTHE;-%.5=BUTTONTOEXIT;.OTE=0AL/NLY4ELETEXT-ODE3ELECTTHE4ELETEXTCHARACTERSET$ECODER)FADECODERORADESCRAMBLERISCONNECTED)NPUT3OURCEWILLBECHANGEDTO3#!24AUTOMATICALLY#LOSED#APTION3ETTING&OLLOWTHESESTEPSFORSETTINGTHECLOSED#APTIONྙ0RESSTHE;-%.5=BUTTONྚ3ELECTTHE;/PTION=MODEBYUSINGTHE;ඔඖ=BUTTONྛG3TEP#APTION/N/FF3ELECTIONA-OVETHE;#LOSED#APTION=BYUSINGTHE;̵̷=BUTTONB3ELECTTO;/N=BYUSINGTHE;ඔඖ=BUTTONྜG3TEP#APTION-ODE3ELECTION####448$3  A -OVE THE ;#LOSED #APTION -ODE= BY USINGTHE;̵̷=BUTTONB0RESSTHE;ඔඖ=BUTTONTOSELECTTHEDESIREDMODEྜྷG3TEP#APTION"ACKGROUND3ELECTION/PAQUE4RANSLUCENTA-OVETHE;#LOSED#APTION"ACK=BYUSINGTHE;̵̷=BUTTONB0RESSTHE;ඔඖ=BUTTONTOSELECTTHEDESIREDMODEྞ 0RESS THE ;-%.5= BUTTON TO EXIT THE /PTIONMENU;.OTE=)NTHEEVENTYOURECEIVEAPOORSIGNALANEMPTY BLACK BOX MAY APPEAR AND DISAPPEAREVEN WHEN THE TEXT MODE IS SELECTED 4HIS ISNORMALFUNCTIONINSUCHANEVENTOptionOptionMove Select AdjustSEL MENUMENUMove Select AdjustSEL MENUMENUi  8 1(081(097*1$//('''$/(6Osd TimeoutMenu BackgroundLanguageSleep Time5 sec 15 sec 60 seczz7HOHWH[W0RGH'HFRUGHUOsd TimeoutMenu BackgroundLanguageSleep Time5 sec 15 sec 60 seczzClose CaptionClose Caption VideoOff OnOpaqueEnglish0LQ3DQ(XUR2QOpaqueEnglish123 MinCC 1Close Cation Back Transparent
23BASIC OPERATION5. Basic Operation5.8 Teletext (PAL Only)5.8.1) Teletext FeatureMost television channels provide writteninformation services via teletext. Informationprovided includes:---> Television programme times---> News bulletins and weather forecasts---> Sports results---> Travel informationThis information is divided into numberedpages (see diagram).Teletext information is often divided betweenseveral pages displayed in sequence, which canbe accessed by:---> Entering the page number---> Selecting a title in a list---> Selecting a coloured heading(FASTEXT system)You can display Teletext information at any timeon your television. For Teletext information tobe displayed correctly, channel reception mustbe stable; otherwise:---> Information may be missing---> Some pages may not be displayed.5.8.2) Displaying the Teletext InformationྙPress the [ ] button to enter the Teletext mode.ྚTo exit from the Teletext display, Press the [ ]button again.5.8.3) Selecting a Text PagesྙUsing the Number Buttons.Enter the three-digit page number given in thecontent by pressing the corresponding Numberbuttons. : The selected Page number appears atthe top of the screen and page appears after ashort time.ྚGFASTTEXT SystemIf the FASTEXT system is used by thebroadcasting company, the different topicscovered on a Teletext page are color-codedand can be selected by pressing the colouredbuttons on the remote control.Press the coloured button corresponding to thetopic that you wish to select; the available topicsare given on the status line.ྛDisplay the Previous or Next page.ྜGSub-page can scrolled by using the[ ]/[ ] buttons.ྜྷTo exit from the Teletext display, Press the[ ] button.Part ContentA Selected page number.B Broadcasting channel identity.C Current page number or search indications.D Date and time.EText.F Status information./ FASTEXT information.1111?i3,36:$3326,7,216,=(7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(18
24BASIC OPERATION5. Basic Operation5.8.4) Selecting Display OptionsIndex Page[ ]ྙYou can switch directly to the programmedpreview or the overview page of the station youare currently viewing by pressing the INDEXbutton.Page Hold [ ]ྙSome Teletext pages contain moreinformation than can be displayedsimultaneously and are therefore sub-dividedinto a series of two or more pages.ྚThe first sub-page of a series of four sub-pages will, for example, be indicated by a 1/4displayed on the top right hand side of the textpage.ྛThese sub-pages are automatically rotated,each page being displayed for a set time beforebeing replaced by the next page. If you need toread a certain page for longer than is allowed, orretain a particular sub page, then the HOLDbutton should be pressed. The HOLD symbolwill be displayed on the top left hand sideinstead of the page number and pageacquisition will be stopped.ྜNormal operation is restored by pressing theHOLD button again or by entering a new pagenumber.Subcode[ ]ྙFor Teletext information that is longer thanone page, it may take some time for theautomatically changing of sub-pages to reachthe sub-page you require. It is possible,however, to enter the sub-page you require andcontinue watching a normal TV program untilthe correct sub-page has been reached.ྚPress SUBCODE button.ྛEnter the desired sub-page number.ྜWhen the requested sub-page is reached, themain page number will be superimposed on thenormal TV picture.ྜྷPress the Teletext button to display the storedsub-page.Reveal [ ]ྙSome Teletext pages play a role in concealingpart of the display in, for example, a quiz pagewith concealed answers.ྚThe REVEL button release the concealed textas long as the Reveal button is not pressedagain.Size[ ]ྙBy pressing the SIZE button , either the tophalf or the buttom half or the bottom half of theText display can be expanded.ྚPress the Size button once and the top half ofthe display expanded.ྛPress again and the bottom half is expanded.ྜPress again and the display return to normalsize characters.Cancel[ ]ྙThe CANCEL button suppress the Text displayand restores the normal TV picture while thereceiver remains in the Teletext mode.ྚThis function allows you to request Teletextpages and alter Teletext controls withoutinterrupting a TV program.ྛIf a new page is requested while Teletext iscancelled, the page header is displayed in a boxon the screen for 5 seconds.i?11?i3,36:$3326,7,216,=(7:,13,&6&5((1=22067,//7(;73,&785(6281'67(5(2$'''(//$1*790(180(18
25BASIC OPERATION5. Basic Operation5.9 Contents Blocking(V-Chip): NTSC Only5.9.1) Contents BlockingFollow these steps for setting the ContentsBlocking:ྙPress the [MENU] button.ྚSelect the [Setting] mode by using the [ඔVඖ] button.ྛMove the [Content Blocking] mode by usingthe [̵V̷] button.ྜSelect the [Content Blocking] mode bypressing the [ඖ] button.ྜྷStep1. Input Password.ྞStep2. Setting the Movie Blocking Grade.ྟStep3. Setting the TV Blocking Grade.ྠPress the [MENU] button to exit the ContentBlocking Controls.5.9.2) Input PasswordA. InputYou have to input the password for the settingthe Contents Blocking Function.ྙMove the [Enter] mode by using the [̵V̷]button.ྚSelect the [Enter] mode by pressing the [ඖ]button.ྛInput the Password by using the cursorbuttons.ඔVඖ: Move the position of password number.̵V̷ ]: Increase or Decrease number.ྜPress the [SEL] button to enter the sub menu.B. ChangeྙMove the [Change] mode by using the [̵V̷]button.ྚSelect the [Change] mode by pressing the [ඖ] button.ྛChange the Password by using the cursorbuttons.ྜPress the [SEL] button to change password.C. ClearResetting the password to default number.Default password is 000000.ྙMove the [Clear] mode by using the [̵V̷]button.ྚSelect the [Clear] mode by pressing the [ඖ]button.Move Select AdjustSEL MENUMENUPictureInput SourceContent BlockingPanelSettingMove Select AdjustSEL MENUMENUpasswordenterchangeclear1234567890000000 OKAAAA6(/i$'''(//$1*790(180(18
Move Select AdjustSEL MENUMENUMove Select AdjustSEL MENUMENU26BASIC OPERATION5. Basic Operation5.9.3) Movie BlockingྙGInput the password.ྚGPress the [Menu] button to exit the[Password] Mode.ྛSelect the Movie blocking mode by the using[ඔVඖ] button.ྜSet the Movie Blocking categories by usingthe cursor buttons.G̵V̷G: Move the desired blocking category.[SEL] : Lock or Unlock the category.ྜྷPress the [Menu] button to exit the [Movieblocking] Mode.[Note] Contents Blocking is automatically blockcertain categories that are "more restrictive". Forexample, if you select G category, all categorieswill automatically be blocked.MPAA(Motion Picture Association of America)Guide Line.5.9.4 ) TV BlockingྙInput the password.ྚGPress the [Menu] button to exitthe [Password] Mode.ྛSelect the [TV blocking] mode by the using[ඔVඖ]button.ྜSet the TV blocking categories by using thecursor buttons.[ඔVඖ]̵V̷G: Move the desired blocking category.SEL : Lock or Unlock the category.ྜྷPress the [Menu] button to exit the [TVblocking] Mode.Category DescriptonGGeneral audience. (on restrictions)PG Parental guidance suggestedPG-13 Parents strongly cautionedRRestricted.NC-17 No children under age 17XAdult only.NR Not ratedTV Guide Line Additional OptionY: Young Children FV: Fantasy violenceY7: Children 7 and over D: Sexually Suggestive DialogG: General audience L: Adult LanguagePG: Parental guidance S: Sexual situation14: Viewers 14 and over V: ViolenceMA: Mature audienceGmovie blocking1234567890GGGGPGPGGGGGGGGGtv blocking1234567890GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
27TROUBLE SHOOTING6. Trouble ShootingThe power does notturn on.Power to the TV is notplugged in. Check source of power to the TV.Symptom Cause Possible SolutionThe remote control doesnot work.Sensor is blocked.Batteries in remote controlare weak.Clear path for sensors.Clean sensor lens.Replace batteries.No signal is displayed. Video source incorrect.Check video source connection.Make sure TV is set to correct videosource.Picture scrolls or isfuzzy. Antenna type or location. Change antenna.Try antenna in different location.Picture appears butNo sound.Volume set at the minimum.Speakers aren't connected.Audio input set incorrectly.Increase the Volume.Connect the speakers properly.Check Audio input connection.Part of picture is cut offOr picture is not centered.Improper Position setting.The signal is unstable.Adjust the Position properly.When RGB, DTV/HD mode,Set to the proper resolution andAdjust the Freq. And Phase setting.(Refer to page 22.)Picture is too large orToo small.Improper the screen sizeSetting.Adjust the screen size setting.(Refer to page 20, 23.)The brightness is reducedgradually.Fixed patterns aredisplayed for a long time.Image Sticking Minimization Mode.
28CLEANING &MAINTENANCE7. Cleaning & MaintenanceIdentifying Problems- Do not put the PDP near extermely not, cold,humid or dusty places.- Do not put the PDP near appliances that create magnetic fields.- Keep the ventilation openings clear.Liquids- Do not place liquids near or on the PDP.Cabinet- Never open the cabinet or touch parts inside.- Wipe your PDP with a clean, dry cloth, Never use water, cleaning fluids, wax, or chemicals.- Do not put heavy objects on top of the cabinet.Temperature-If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least twohours so that moisture that formed inside the unit can dry completely.
FCC Compliance Statements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. Warning : Your are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment.

Navigation menu