Digital Multimedia Technology DMS2004UHDW SETTOP BOX User Manual Microsoft PowerPoint MANUAL DMS2344UHDW

Download:
Mirror Download [FCC.gov]
Document ID	2442658
Application ID	7Zmb2u2IuKmPeX0XWN+f8g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	124.36kB (1554534 bits)
Date Submitted	2014-11-12 00:00:00
Date Available	2014-11-12 00:00:00
Creation Date	2014-11-05 17:47:51
Producing Software	Hancom PDF 1.3.0.404
Document Lastmod	2014-11-05 17:47:51
Document Title	Microsoft PowerPoint - MANUAL_DMS2344UHDW
Document Creator	Hancom PDF 1.3.0.404
Document Author:	BJ

HD Set-Top BO 7
User Guide
1. Read these instructions. 10. Protect the power cord from being walked on or pinched
. . particularly at plugs. convenience receptacles. and the
2' Keep these Instructions. point where they exit from the apparatus. Ensure that the
3. Heed all warnings. power cord receptacle is accessible such that power can
. . be easily disconnected if required.
4. Follow all Instructions.
. 11. Only use the attachments/accessories specified by
5. Do not use this apparatus near water. the manufacturer.
6' Clean only wnh a dry cloth. 12. Use only with a cart. stand. tripod. bracket. or table
7. Do not block any of the ventilation openings. Install in specified by the manufacturer. or sold with the apparatus.
accordance with the manufacturer's instructions. When a cart is used. use caution when moving the cart/
8. Do not install near any heat sources such as radiators, apparatus combination ‘0 avoid Injury from tip-over.
heat registers. stoves. or other apparatus (including 13. Unplug this apparatus during lightning storms or when
amplifiers) that produce heat. unused for long periods of time.
9. Do not defeat the safety purpose of the polarized or 14. Refer all seNicing to qualified service personnel. Servicing
grounding type plug. A polarized plug has two blades is required when the apparatus has been damaged in
with one wider than the other. A grounding type plug has any way. such as power supply cord or plug is damaged.
two blades and a third grounding prong. The wide blade liquid has been spilled or objects have fallen into the
or the third prong is provided for your safety. When the BPPBFBIUSV the apparatus has been exposed to rain or
provided plug does not fit into your outlet. consult an moisture. does not operate normally. or has been dropped.
electrician for replacement of the obsolete outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS. SUCH
AS VASES. SHALL BE PLACED ON THE APPARATUS.
FCC Information
This equipment complies With FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum 20 cm between the radiator and your body.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful interference in a
residential installation
This equipment generates, uses and can radiate radio frequency energy
and. it not installed and used in accordance with the instructions, may cause
harmful interference to radio communications However, there is no guaran-
tee that interference Will not occur In a particular installation,
lfthis equipment does cause harmful interference to radio or television rer
Disconnection Device
ception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
followmg measures:
~ Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
~ Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the user's
authority to operate such equipment.
Disconnect the main plug from the apparatus, if it's defective. And please call a repair man in your location. When used outside of the US, it may be used
HAH code with fittings of an approved agency is employed,
CAUTION
These servicing instructions are for use by qualified service personnel only, To reduce the risk of electric shock do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so,
CAUTION
RISK OF ELECTRIC SHOCK
NO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFERS SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
T The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of “dangerous
voltage" within the product‘s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
! The exclamation point within an equilateral triangle is intended
to alert the userto the presence of important operating and main-
tenance (servicing) instructions in the literature accompanying
the product.
General features
. Favorite channel, Parental Lock - Support RF4CE application
. Automatic search for newly added transponder (Network Auto Search) - RF4CE Frequency range : 2425MH2~2475MH2
0 Stores up to 5000 channels 0 Support for variousvideo output: HDMI, RF 3/4 Mod.
. Plug-andplay data tranier system (DSR to DSR) - HDMI 1.3a with HDCP1.1
- Timer function, automatically turns On/Off by setting function - USS/4 Channel
(daily, weekly, monthly and one time) - MPEG-2 / MPEG-4 Part 10 / H264
. Automatic reserved channel moving system - Video Display format with NTSCI480p/576pl7209/1080i
- Provide Electronic Program Guide (EPG) - Dolby Digital A03
- PAL/NTSC automatically conversion - RF input frequency range : 105 to 1002MHz
. Laa channel auton‘atically saving
Men u
Press the Menu button on your remote control to access the main menu. The menu
will allow you to update your HD set-top box settings. Press the arrow buttons to
navigate through the menu. Press Exit at anytime to return to watching live TV.
Audio Language -)
Select Audio Language. press the OK button on your remote.
Scroll to select the desired Audio Language (if available].
Closed Captioning 9 “funny“ snudznxknhucwn
Select Closed Captioning, press OK to change status from On/Off.
When Closed Captioning is turned On. The following options are available;
Analog Service. Digital Sen/ice. Font Size. Scroll through the available settings
using your arrow buttons. Ensure you select Apply to change the CC setting.
HDMI Setup ->
Select TV Aspect Ratio and press the OK button. Select Auto (recommended).
4:3. or 16:9 and press the OK button to select. scroll to Apply and select.
Select TV Output Resolution and press the OK button, Scroll to highlight Auto
(recommended). 1080i. 720p. or 480p and press the OK button to select. scroll ..
to Apply and select. mm
mm Airy-iv
um m
n. nun"... a... not
no nu 54- m:
m mum-w nu
m a.“ an
in! mi a..." up
at mm.
m um m:
m svrv
Locks Setup (-
The first time you enter Locks Setup, it will prompt you to
Create Locks PIN. Enter your desired PIN and keep that in a safe
place to referto later. This PIN will be needed to Change PIN.
Clear PIN and set Channel Locks.
Set Channel Locks It
Select Channel Locks, a channel list wrll appear. Scroll up/
down to highlight the channel you would like to lock. Press the
OK button and you will see the unlock icon change to lock, This
will indicate the channel has been locked and will require a PIN
to be entered to view.
TV Ratings Lock It
Choose TV Ratings Lock to lock programs by their TV Rating.
Use the Arrow (A/V) buttons to highlight the TV Ratings you
want locked and select OK to lock/unlock the ratings. When you
select a rating it will lock all programs with that rating and higher.
For example if you lock TV-14 it will look all programs with TV-14
as well as those with TV-MA,
NOTE: Not all programs Will have aTV rating and any unrated programs Will
never be locked regardless of the TV Ratings Lock selected
Using the
RF output?
SD Setup
Use SD Setup to
scale video to
your TV.
Select SD Setup
and press OK.
The following op
tions are available;
Aspect Ratio, Just
Scale, Box. and Pan
and Scan.
NOTE
- When insening
batteries, make sure
that the polarity (+/r)
is correct.
The LED on the top of
the remote is a visual
indicator that confirms
the remote has
power when a button
is pressed.
- Y or remote may vary
slightly from the one
pi(tured here.
However, basi:
functions should
remain the same.
TV lnput’
Toggle TV Input
info
View the channel name
and number, date and time
Page Up
Now & Next page up
Menu
Display the Main Menu
OK
Select a highlighted item Within
Menus. Display channel name
and number, date and time
Volume
Audio up & down
Guide
View Now & Next
Yellow A
Toggle to secondary language
(it available}
*‘rv must be programed mm the remote
LED Indicator
Button press and special
command indication
TV Power'
Turn your TV on or oil
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
Now & Next page down
Channel
Channel up 8‘ down
Mute
Sound on & ofi
Red C
Toggles through available closed captioning
Setup
Program your remote control to your STB
and TV
Installing your H D Set-Top Box out of sight (pair remote) 4’
Your remote control can be paired directly with your HD 8TB. allowing you to place the device out
of sight (in an entertainment center or behind your TV. for example). Once your remote is paired to
a specific HD 8TB, it will not control any other set-top box in your home
Pair your remote control with your HD STB
1. Press the Menu button
2. Select Remote Control and then select
Remote Control Pairing,
3. Press and hold Setup button until the
LED Indicator turns green.
4. Press the Menu button.
Please allow a law seconds for the menu to dlsplay
5. Proceed by entering the pairing code displayed
in blue on the pairing code pop-up screen.
To force remote control to send volume
control commands to the TV
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume up button
um.
I mm v-Ilsnuvwnmumluu
mm m— r-nlbnuluu
x. mm m'hltm
) hmhymlmthumm
M.“ t."
tilyw‘vftmluimlwl-w-n
Simian!
Note: It you don t see a pairing code screen repeat steps i and 2
To toroe remote control to send volume
control commands to the HD STB
‘I. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down button
Note: Relerto the Remote Control Programming and Operating instructions provided with your remote control to program your remote to
work on your TV and ror more detailed Information regarding pairing your remote
Remote Co trol
Remove remote
control pairing
If you would like to
use your remote
control for a different
set-top box, you
must first un-pair
the remote control
from the current
device. Follow the
steps below to
remove the pairing.
1 FIE<§ and hold the
Setup button until
the LED Indicator
turns green.
2 Enter 9-8-7 on the
remote control.
3 The LED Indicator will
blink green twice.
FAQs
Why want my HD Set-Top Box turn on?
- Double check that the power cord is connected to the
HD Set-Top Box and the AC wall outlet.
- If the HD Set-Top Box IS connected to another unit
(such as a switched outlet or DVD player). verify that
the unit is powered on.
Why do I have no sound when viewing cable channels?
- Verify that the MUTE button on remote control has not
been pressed: try pressing the MUTE button to restore
sound for both the HD Set-Top Box and television.
- Verify that the volume on the HD Set-Top Box is not
turned down. Press the volume up on the Set-Top Box
remote. Volume level will be displayed on the bottom
ofthe screen.
. Double check your audio connections. Refer to the
CABLE CONNECTIONS section on page 3 to verify
the correct cables are being used forthe audio ports. If
they match the diagrams. make sure they are firmly
connected to the ports on both the TV and HD Set-Top Box.
What should I do if there is no video or picture on the
TV screen?
- Tn/ another channel or enter your PIN code this channel
may be restricted from viewing.
- Verify that your TV is matching the setting on the
HD SeteTop Box. For instance, if you've connected using
the coaxial jumper cablei make sure you have the same
channel selected on the TV and 3/4 switch on the back of
the HD Set-Top Box. Refer to CABLE CONNECTIONS
section on page 3 for more details.
0 Double check all your cable connections. including
verifying your coaxial cable is securely tightened onto
both the cable wall outlet and the INPUT port of your
HD Set-Top Box. Verify that all video cables between the
HD Sethop Box and the TV are firmly connected. Refer
to the CABLE CONNECTION section on page 3 for
more detailed information regarding the correct
connections and alternative video cable options.
- If the HD Set-Top Box video output is connected to a
home theater unit. verity that the home theater unit is
powered on and set to the appropriate input source,
Refer to your home theater manual for more
detailed instructions.
Why won‘t my HD Set-Top Box respond when I press a
button on the remote control?
' Check the batteries for possible replacement. Refer
to pages 5-6 for more detailed instruction on the
remote control and batteries.
0 Refer to page 6 for instructions to pair your
remote control,
What if I forgot my PIN Code?
° Contact your cable provider and they will be able to reset
them back to the default. That will allow you to enter a
new PIN code. Refer to page 8 to learn how to change
your PIN code.
How do I control what my child watches?
- You can restrict viewing of certain material on your
TV in the Locks Setup menu. Refer to page 8
for instructions,
Is it necessary to get a new TV to watch HDTV?
- To View HD channels from your cable provider in their
native resolution. a high-definition "capable" or “ready"
television is required.
° You will also need to use a digital cable connection
such as the HDMI cable to View HD channels. Refer to
the CABLE CONNECTIONS section on page 3 for
more information.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 10
Tagged PDF                      : No
Language                        : ko-KR
Page Layout                     : SinglePage
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
PDF Version                     : 1.4
Producer                        : Hancom PDF 1.3.0.404
Creator Tool                    : Hancom PDF 1.3.0.404
Create Date                     : 2014:11:05 17:47:51+09:00
Modify Date                     : 2014:11:05 17:47:51+09:00
Metadata Date                   : 2014:11:05 17:47:51+09:00
Format                          : application/pdf
Creator                         : BJ
Title                           : Microsoft PowerPoint - MANUAL_DMS2344UHDW
Date                            : 2014:11:05 17:47:51+09:00
Document ID                     : 25928F74-FE93-4282-B1B5-BEFC03661909
Instance ID                     : uuid:C84C4AC8-CA08-491B-88F4-AC7CD6FFCEE6
Part                            : 1
Conformance                     : B
Author                          : BJ

EXIF Metadata provided by EXIF.tools