Digital Multimedia Technology DMS2344UHDW HDuDTA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2381626
Application ID	aZt3c7J9wTsk60JRuTdbqQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148.07kB (1850905 bits)
Date Submitted	2014-09-08 00:00:00
Date Available	2014-09-08 00:00:00
Creation Date	2017-10-21 08:17:56
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 08:17:56
Document Title	PowerPoint 프레젠테이션
Document Creator	Microsoft® PowerPoint® 2010
Document Author:	BJ

HD Set-Top Bo ‘7
User Guide
1. Read these Instructions. 10. Protect the power cord from being walked on or pinched
. . particularly at plugs, convenience receptacles, and the
2' Keep these Instructions. point where they exit from the apparatus. Ensure that the
3. Heed all warnings. power cord receptacle is accessible such that power can
. . be easily disconnected if required.
4. Follow all Instructions.
. 11. Only use the attachments/accessories specified by
5. Do not use this apparatus near water. the manufacturer.
6' Clean only mm a dry cloth. 12. Use only With a cart, stand, tripod, bracket, or table
7. Do not block any of the ventilation openings. Install in Specified by the manufacturer, or sold with the apparatus.
accordance with the manufacturer’s instructions. When a cart Is used, use caution when movmg the cart/
8. Do not install near any heat sources such as radiators, apparatus combination to aVOId Injury from tip-over.
heat registers, stoves, or other apparatus (including 13. Unplug this apparatus during lightning storms or when
amplifiers) that produce heat. unused for long periods 01 time.
9. Do not defeat the safety purpose of the polarized or 14. Refer all servicing to qualified service personnel. Servicing
grounding type plug. A polarized plug has two blades is reouired when the apparatus has been damaged in
with one wider than the other. A grounding type plug has any way. such as power supply cord or plug is damaged.
two blades and a third grounding prong. The Wide blade liquid has been spilled or objects have fallen into the
or the third prong is prowded for your safety. When the apparatus, the apparatus has been exposed to rain or
provided plug does not fit into your outlet, consult an moisture, does not operate normally, or has been dropped.
electrician Ior replacement of the obsolete outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES. SHALL BE PLACED ON THE APPARATUS.
FCC Information
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment This equipment should be installed and
operated with minimum 20 cm between the radiator and your body.
This equipment has been tested and found to comply with the limits for a
Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance With the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
lfthis equipment does cause harmful interference to radio or television re-
Dlsconnectlon Devlce
ception which can be determined by turning the equipment off and on. the
user is encouraged to try to correct the interference by one or more ofthe
followmg measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the user's
authority to operate such equipment.
Disconnect the main plug from the apparatus, if it's defective And please calla repair man in your location When used outside ofthe U S, it may be used
HAR code With fittings of an approved agency is employed.
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any sen/icing other than that
contained in the operating instructions unless you are qualified to do so.
CAUTION
RISK OF ELECTRIC SHOCK
NO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK),
NO USER-SERVICEABLE PARTS INSIDE.
REFERS SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
/§\ The lightning flash with arrowhead symbol, within an equilateml
triangle, is intended to alert the user to the presence of “dangerous
voltage" within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
! The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and main-
tenance (sen/icing) instructions in the literature accompanying
the product.
General features
- Favor'ne channel, Parental Lock - Support RF4CE application
- Automatic search for newly added transponder (Network Auto Search) . RF4CE Frequency range : 2425MH2~2475MHZ
- Stores up to 5000 channels - Support for various video output : HDMI, RF 3/4 Mod,
- Plug~andplay data transfer slstem (DSRto DSR) - HDMI 1.3a with HDCP1.1
- Timer function, automatically turns On/Off by setting function - US3I4 Channel
(daily, weekly, monthly and onetime) - MPEG-2 / MPEG-4 Part 10/ H264
- Automatic reserved channel moving system - Video Diwlay format with NTSC/480p/576p/720p/1080i
- Provide Electronic Program Guide (EPG) - Dolby Digital AC3
- PAL/NTSC automatically conversion - RF input frequency range : 105 to 1002MHz
- Last channel automatically saving
Menu
Press the Menu button on your remote control to access the main menu. The menu
will allow you to update your HD set-top box settings. Press the arrow buttons to
navigate through the menu. Press Exit at anytime to return to watching live TV.
Audio Language -)
Select Audio Language press the OK button on your remote.
Scroll to select the desired Audio Language (if available).
Closed Captioning _) .q. ammunmomu
Select Closed Captioning. press OK to change status from On/Ofl.
When Closed Captioning is turned On. The following options are available; :fj:::';mm
Analog Service. Digital Service. Font Size. Scroll through the available settings “M“
using your arrow buttons. Ensure you select Applyto change the CC setting
HDMI Setup -)
Select TV Aspect Ratio and press the OK button. Select Auto (recommended),
4:3. or 16:9 and press the OK button to select. scroll to Apply and select.
Select TV Output Resolution and press the OK button. Scroll to highlight Auto "mm
(recommended). 1080i. 720p. or 480p and press the OK button to select. scroll m»
mm mm.
to Apply and select. so...“
tmmwp
{ma mw
Mi. m
mutant
5mm
1mm
W-u
(harm-l rm; r4414
we
w-vr
mm
m t. m w m
m. ma
Locks Setup (-
The first time you enter Locks Setup. it will prompt you to
Create Locks PIN. Enter your desired PIN and keep that in a safe
place to refer to later. This PIN Will be needed to Change PIN,
Clear PIN and set Channel Locks.
Set Channel Locks I6
Select Channel Locks. a channel list will appear. Scroll up]
down to highlight the channel you would like to lock. Press the
OK button and you Wlii see the unlock icon change to lock. This
will indicate the channel has been locked and will require a PIN
to be entered to View.
TV Ratings Lock It
Choose TV Ratings Look to lock programs by their TV Rating.
Use the Arrow (A/V) buttons to highlight the TV Ratings you
want locked and select OK to lock/unlock the ratings. When you
select a rating it Will lock all programs with that rating and higher
For example if you lock TV—14 it will lock all programs with TV-t4
as well as those with TVPMA.
NOTE: Not all programs will have a TV rating and any unrated programs will
never be locked regardless of the TV Ratings Lock selected.
Using the
RF output?
SD Setup
Use SD Setup to
scale video to
your TV.
Select SD Setup
and press OK.
The following op-
tions are available:
Aspect Ratio. Just
Scale, Box, and Pan
and Sean.
NOTE
- When inserting
batteries, make sure
that the polarity (+/’-i
is corrett.
The LED on the top of
the remote is a visual
indicator that confirms
the remote has
power when a button
is pressed.
Yourremote mayvary
slightly From the one
pictured here.
However, basic
functions should
remain the same.
TV input”
Toggle TV input
into
View the channel name
and number. date and time
Page Up
Now & Next page up
iVlenu
Display the Main Menu
OK
Select a highlighted item within
Menus. Display channel name
and number. date and time
Volume
Audio up & down
Guide
View Now 8. Next
Vellow A
Toggle to secondary language
iir available)
~rv rr‘ust be pvzgrawed Wit’i the remote
LED indicator
Button press and special
command indication
TV Power‘
Turn your TV on or off
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
New & Next page down
Channel
Channel up & down
Mute
Sound on & off
Red C
Toggles through available closed captioning
Setup
Program your remote control to your STB
and TV
Installing your HD Set-Top Box out of sight (pair remote) ‘14
Your remote control can be paired directly with your HD STE. allowing you to place the device out
of sight (in an entertainment center or behind your TV. for example). Once your remote is paired to
a specific HD STB. it will not control any other setntop box in your home.
Pair your remote control with your HD STE
1 Press the Menu button.
2. Select Remote Control and then select
Remote Control Pairing.
3 Press and hold Setup button until the
LED Indicator turns green.
4 Press the Menu button.
Please allow a rew seconds for tne menu to display
5 Proceed by entering the pairing code displayed
in blue on the pairing code pop-up screen.
To force remote control to send volume
control commands to the TV
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume up button
Mm.“ uwn‘u mum-mm...
L h ZiPnth-mu‘hmm
timeuui
Note: ii you don't see a pairing code screen repeat steps 1 and 2.
To force remote control to send volume
control commands to the HD STB
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down button
Note: Refer to the Remote Control Programming and Operating instructions, provided with your remote oontroi to program you“ remote to
work on your TV and tor more oerarieo nlormatiori regarding pairing your remote.
mote Control
Remove remote
control p ' ng
If you would like to
use your remote
control for a different
set-top box, you
must first un-pair
the remote control
from the current
device. Follow the
steps below to
remove the pairing.
1 Press and hold the
Setup button until
the LED Indicator
turns green.
2 Enter 9-8—7 on t
remote control.
3 The LED Indicator will
blink green twrce.
FAQs
Why won't my HD Set-Top Box turn on?
- Double check that the power cord is connected to the
HD SetrTop Box and the AC wall outlet.
- If the HD SeteTop Box is connected to another unit
(such as a switched outlet or DVD player). verify that
the unit IS powered on.
Why do I have no sound when viewing cable channels?
0 Verify that the MUTE button on remote control has not
been pressed: try pressing the MUTE button to restore
sound for both the HD Set-Top Box and television.
' Verify that the volume on the HD Set-Top Box is not
turned down. Press the volume up on the Set-Top Box
remote Volume level will be displayed on the bottom
of the screen.
0 Double check your audio connections. Refer to the
CABLE CONNECTIONS section on page 3 to verify
the correct cables are being used for the audio ports. If
they match the diagrams. make sure they are firmly
connected to the ports on both the TV and HD Set»Top Box.
What should I do if there is no Video or picture on the
TV screen?
' Try another channel or enter your PIN code. this channel
may be restricted from viewing.
~ Verify that your TV is matching the setting on the
HD Set~Top Box. For instance, if you’ve connected using
the coaxial jumper cable. make sure you have the same
channel selected on the TV and 3/4 switch on the back of
the HD Set-Top Box. Refer to CABLE CONNECTIONS
section on page 3 for more details.
0 Double check all your cable connections, including
verifying your coaxial cable is securely tightened onto
both the cable wall outlet and the INPUT port of your
HD Set-Top Box. Verify that all video cables between the
HD Set-Top Box and the TV are firmly connected. Refer
to the CABLE CONNECTION section on page 3 for
more detailed information regarding the correct
connections and alternative video cable options.
' If the HD Set-Top Box video output is connected to a
home theater unit. verify that the home theater unit is
powered on and set to the appropriate input source. How do I control what my child watches?
Refer to your home theater manual for more ‘ You can restrict vieWing of certain materiai on your
detailed instructions TV in the Locks Setup menu. Refer to page B
for instructions.
Why won’t my HD Set-Top Box respond when I press a
button on the remote control? Is it necessary to get a new TV to watch HDTV?
- Check the batteries for possible repiacement. Refer ' To View HD channels from your cable provider in their
to pages 5-6 for more detailed instruction on the native resolution, a high-definition “capable" or “ready"
remote control and batteries. television is required.
- Refer to page 6 for instructions to pair your ‘ You Will also need to use a digital cable connection
remote control such as the HDMI cable to view HD channels. Refer to
the CABLE CONNECTIONS section on page 3 for
What if I forgot my PIN Code? more information.
- Contact your cable provider and they will be able to reset
them back to the default. That will allow you to enter a
new PIN code. Refer to page B to iearn how to Change
your PIN code.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : BJ
Create Date                     : 2014:09:03 18:00:38+09:00
Modify Date                     : 2014:09:04 16:29:06+09:00
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : BJ
Title                           : PowerPoint 프레젠테이션
Creator Tool                    : Microsoft® PowerPoint® 2010
Metadata Date                   : 2014:09:04 16:29:06+09:00
Producer                        : Microsoft® PowerPoint® 2010
Document ID                     : uuid:4eecbf79-d7c8-4fbc-a592-c723ca27d340
Instance ID                     : uuid:bf60d9e8-f98e-4ee2-99ec-10451ca8175e
Page Count                      : 10

EXIF Metadata provided by EXIF.tools