Dirt Devil M110000 User Manual VACUUM Manuals And Guides L0608063

DIRT DEVIL Vacuum, Upright Manual L0608063 DIRT DEVIL Vacuum, Upright Owner's Manual, DIRT DEVIL Vacuum, Upright installation guides

User Manual: Dirt Devil M110000 M110000 DIRT DEVIL VACUUM - Manuals and Guides View the owners manual for your DIRT DEVIL VACUUM #M110000. Home:Vacuums & Floor Care Parts:Dirt Devil Parts:Dirt Devil VACUUM Manual

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

THiS VACUUM CLEANER iS iNTENDED FOR HOUSEHOLD USE ONLY.

iMPORTANTSAFETYiNSTRUCTiONS
OWNER'SMANUAL
Operating and Servicing Instructions

This cleanerusesthe
following parts:

BELTSTYLE
FILTERTYPE

When you use an appliance, basic precautions should always be followed,
including the following:
* READ ALL iNSTRUCTiONS BEFORE USING THiS APPLIANCE.
* ALWAYS FOLLOW THESE SAFETY iNSTRUCTiONS.
* BRING CLEANER TO UPRIGHT POSiTiON WHEN USING THE HOSE AND
ATTACHMENTS.
* DO NOT LEAVE CLEANER UNATTENDED WHEN PLUGGED IN.
* REGULARLY CHECK THE FILTERS TO CLEAN OR REPLACE.
* WARNING: DO NOT USE SHARP OBJECTS TO CLEAN OUT THE HOSE
SINCE THEY COULD CAUSE DAMAGE.
* OCCASIONALLY REMOVE BRUSH AND CLEAN DEBRIS FROM END CAPS
TO KEEP BRUSH ROTATING SMOOTHLY.
* WARNING: THE CORDS, WIRES, AND/OR CABLES SUPPLIED WiTH THiS
PRODUCT CONTAINS CHEMICALS,
iNCLUDiNG LEAD OR LEAD
COMPOUNDS, KNOWN TO THE STATE OF CALiFORNiA TO CAUSE
CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH
HANDS AFTER USING.

Please read these instructions
carefully before using your Upright.
Let us help you put your vacuum
together or answer any questions,
call:

WARNING:TO REDUCETHE RiSK OF FIRE,
ELECTRICSHOCKORiNJURY:

1-800=321=1134
(USA & Canada)
www.diridevil.com

. Do not leave appliance when plugged in. Unplug from outlet when not in use and
before servicing.
* Do not use outdoors or on wet surfaces. Electrical shock could occur.
* Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
* Use only as described in this manual. Use only manufacturer's recommended
attach ments.

WARNING'.
Cleaner assembly may include small parts.
Small parts can present a choking hazard.

Warranty

Registration

* Onlineat: www.dirtdevil.com
Mail: RoyalApplianceMfg
7005 CochranRd.
Glenwillow,Ohio44139

Espafiol- p#gina E1

For quick reference,pleaserecordyour
vacuuminformationbelow.
Model #:
Mfg. Code:
(Mfg. code locatedon the lower backsideof cleaner)

©2005 All rightsreserved # 1-113081-000
3/06

* Do not use with damaged cord or plug. if appliance is not working as it should,
has been dropped, damaged, Jeff outdoors, or dropped into water, return it to a
service center for inspection. Cail 1-800-321-1134 for the nearest service center.
* Do not puil or carry by cord, use cord as handle, close a door on cord, or puil cord
around sharp edges or corners. Do not run appliance over cord. Keep cord away
from heated surfaces.
* Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
* Do not handle plug or appliance with wet hands.
* Do not put any objects into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, and anything that may reduce air flow.
* Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
* Do not pick up anything that is burning or smoking, such as cigarettes, matches, or
hot ashes.
* Do not use without dirt container and filters in place.
2

• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use
in areas where they may be present.
• Keep the vacuum cleaner on the floor. Only the hand-held vacuum cleaners may
be set on furniture.
• Cleaner must be in the upright position to lift the rotating brush off the carpet
when doing above floor cleaning.
• Do not use an extension cord with this vacuum cleaner.
• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to
prevent tripping accidents.
• Using improper voltage may result in damage to the motor and possible injury to
the user. Proper voltage is listed on the cleaner plate.
• Unplug before connecting Power Brush Tool.

SAVETHESEiNSTRUCTiONS
WARNING:
To reducethe risk of electricshock,this appliancehasa polarizedplug (onebladeis wider
thanthe other). This plug will fit in a polarizedoutletonly oneway. If the plug doesnotfit
fully in the outlet, reversethe plug. If it still does notfit, contact a qualifiedelectricianto
install tile proper outlet.

Do not change tile plug in any way.

CONGRATULATIONS
Yonare now the proudowner of a Dirt DeviP.We trustyournew purchasewill
bringyou manyyearsof satisfaction.
Our companydesigned and developed this productwith you in mind.
We are very proud of our productsand hope that you are equally satisfied
with their quality and performance.
Thankyon for your supportof DirtDeviP products.
Visit our website at www.dirtdevii.com

TABLEOF CONTENTS
Safety Instructions .................................
Features.........................................
How to Assemble ..................................
How To Operate ...................................
Floor/Carpet Cleaning ...........................
Above Floor Cleaning............................
Dirt Container & Filter: Removal & Replacement ..........
Belt or Brush: Removal & Replacement .................
Lightbulb: Removal & Replacement ....................
General Maintenance ...............................
Troubleshooting Guide ..............................

Page 2, 3
Page 5
Page 6
Page 7, 8
Page 7
Page 7, 8
Page 8, 9
Page 10
Page 11
Page 11
Page 12

UMITEDWARRANTY
To the consumer,RoyalAppliance Mfg. Co. warrants this vacuumcleaner to be free of defects in material or
workmanship commencing uponthe date of the original purchase. Referto your vacuumcleaner carton for
the length of warranty and save your originalsales receipt to validate start of warranty period.
If the vacuumcleanershouldbecomedefectivewithin the warrantyperiod,we will repairor replaceany defective
parts free of charge. The complete machinemust be delivered_
to any ROYAL
® AuthorizedSales &
WarrantyServiceStation. Pleaseincludecompletedescriptionof the problem,day of purchase,copyof original
sales receipt andyour name,address andtelephone number. If you are not near a WarrantyStation, callthe
factory for assistanceat USA& Canada:1-800-321-1134. Useonly genuine Royal® replacementparts.
Thewarranty doesnot includeunusualwear, damageresultingfrom accidentor unreasonableuse of the vacuum
cleaner. This warrantydoes not cover brushes,bags,flat belts, filters and bulbs.This warranty does not cover
unauthorizedrepairs.This warrantygivesyouspecificlegalrights andyou mayalso haveotherrights(Otherrights
may vary from stateto state in the USA).

iMPORTANT:USEONLYGENUINEROYAL
® REPLACEMENT
PARTS.
NOTE:TO REGISTERYOURPRODUCT,RETURNYOURWARRANTYCARDOR REGISTER
ONLINEAT WWW.DIRTDEVIL.COM.
4

TOOLREQUIRED:
PHILLIPS
SCREWDRIVER

FRONT

BACK

POWERBRUSH TOOLCADDY ASSEMBLY

,11
13_
m2

12

-'_

Detach did container from
back panel of cleaner by
pressingdid containerrelease
buttonand tiltingforward.

Insert Power Brush Tool
caddy throughholes in back
panel.

Secure Power Brush Tool
caddy with two (2) 1" screws
through front of cleaner.

HANDLEASSEMBLY

7

18

Slide handle through
top of back panel,

21
20

Insert one (1)screw
through front of cleaner
to secure handle.

Reattachdirt containerby
aligning bottom of dirt
container to bottom of
cleanerandpushforward
to snap into place.

SECUREBACKHOSE

TOOLSTORAGE

Wrap hosearound back of hose caddy (Diagram
1). Push hose wand down into the right side of
cleaner (Diagramla).

Attachtools: (a)Clip PowerBrush Toolonto the top of
the tool caddy. (b) Slide the dust brush onto post on
the lower tool caddywith bristles facing out (Diagram
2). (c) Slidethe extensionwand/crevicetool into round
slot on the left side of tool caddy (Diagram2a).

BACK

FRONT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.

Push handle plug
through back of Power
Brush Toolcaddy.

14. CordClip
15. HoseGuide
16. CordWrapWithQuick Cord
Release
17. Long PowerCord
18. AccessDoor
19. Wheels
20. HandleReleasePedal
21. On/OffPedal
22. DustBrush
23. CarryHandle/PowerBrush
ToolCaddy
24. PowerBrushTool

HandleGrip
Handle
Hose
Crevice Tool(inside extensionwand)
Extension
Wand
DirtContainer
Center Dirt Path
CleanReleaseEmptyButton
Headlight
HeightAdjustKnob
Bumper
Air Directors
DirtContainerReleaseButton

5

6

CORDRELEASE

HEIGHTADJUSTLEVER

EXTENSION
WAND

Turn
the
height
adjustment knob to
match the surface
being
cleaned.
iMPORTANT:
For

If additional length is
needed, use the
extension wand and
crevice tool. Pull
crevice tool out of
extensionwand. Use
extension wand and
crevice tool together
or separately.

easiest adjustment,
place cleaner in full
upright position.

CAUTION:Brush agitator continueste rotate while hose is removed or ill use and at all times while cleaeer
is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
Cleaner must be in the upright pesitiee te lift the rotation brush eft the carpet whee cleaning above the
floor.

ON/OFFPEDAL

HANDLERELEASE
PEDAL

CARRYHANDLE

WARNING:TOREDUCE
THE RISKOFINJURYFROMMOVINGPARTS- UNPLUGBEFORE
SERVICING.

FLOOR/CARPET
CLEANING
EMPTYDIRTCONTAINER

Plug cord into electricaloutlet.
Turn cleaneron bydepressing
foot pedallocatedon the back
leftside of the cleaner.

To release handle, push the
handle release pedal located
on the lower left side of the
cleaner.

and adjust it to
the
desired
position for (a)
storing
the
upright,
(b)
operating the
cleaner, and (c)
de-press
the
handle release
pedal again to clean under furniture. NOTE:
Rotating brush could cause area rug fringe to
become tanghd within cleaner, Use caution
when vacuuming throw rugs with fringe.

Pressdirt containerrelease
button and remove dirt
containerfrom cleaner,

ABOVEFLOORCLEANING

Cleanermust be in its upright
positionto raise brushroll.

Remove the hose from the
tool caddy.

Usethe carry handle on
the Power Brush Tool
caddy to move the
cleaner from room to
room.

wand or hose handle. To remove tool, twist
and pull apart gently.

Lift filter cartridge out of base
of cleaner.

REMOVEFILTER
CARTRIDGE

Hold dirt containerover garbagecan and
presscleanreleasedirt containerbuttonto
empty. Snap dirt containerbottom back
into placeafter emptying.

Click buttons on the base of
the cleaner toward the outside
edges to unlock filtercartridge.

REMOVE FOAM FILTER

CLEANPLEATEDFILTER

Removefoam filter from filter
cartridge.

Tap the pleated filter on the
inside of a garbage can to
removeexcessdustand dirtfrom
filter. If filter is still clogged,rinse
underrunningwater and allowto
dry for at least 24 hours before
replacingin cleaner.

WASHFOAMFILTER

REPLACEFOAMFILTER

REPLACE
FILTERCARTRIDGE

TOOLREQUIRED:
PHILLIPSORFLATHEAD
SCREWDRIVER
WARNING:TOREDUCE
THE RISKOFINJURYFROMMOVINGPARTS- UNPLUGCLEANERBEFORECHANGING
BELT
ORBRUSHROLL.

TO REMOVEBELT

Hold foam filter under running
water to wash. Ring excess
water out of filter. Allow filter to
dry for at least 24 hours before
replacinginfilter cartridge.

Returnfoamfilter to filter cartridge.

Return filter cartridge to base of
cleaner.

TOCLEANTHEAiR DIRECTORS
J

Lay cleanerflat and flip cleanerto expose
nozzle base. Base should lay flat and
face up. To remove nozzle guard, use
Phillips screwdriver to remove the three
(3) screws. Arrows show location of
screws.
_

To remove Air Directors, rotate
1/4 turn couaterclockwise.

Lift and remove brushroll.
Disposeof old belt.

TOREPLACEBELTORBRUSHROLL

iiiiliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Click buttons back into place
to lock filtercartridge inbase of
cleaner.

Pull and lift nozzleguard off.

Pull out and wipe with a dam
cloth to clean.

REPLACEDiRTCONTAINER

Slide belt onto motorshaft.

Dryand return the Air Directors
to the dirt container. Rotate
1/4 turn clockwise to lock in
place.

Place new belt in area of
brushroll without bristles,

Rotatebrushroll manuallyto make sure belt is
properly aligned.

Return dirt container to cleaner.
Align slot on bottom of dirt
container with tab on cleaner.
Push to snap into place.

Reattach nozzle guard.

9

Secure by aligning the three
(3) tabs in the base slots.

10

Replace all three (3) screws
to secure nozzle guard.

TOOLREQUIRED:
FLATHEABANDPHILLIPSSCREWDRIVER
WARNING:TO REDUCE
THERISKOFELECTRIC
SHOCK- UNPLUGCLEANERBEFOREREMOVING
OR
REPLACING
LIGHTBULB.
This cleaneruses a common automotive lamp #906, 13.0 volts, For bulb replacement call 1-800-321-1134
or your local auto parts store,

WARNING:TO REDUCE
RISKOFPERSONALINJURY- UNPLUGCLEANERBEFORE
SERVICING
PROBLEM

POSSIBLE REASON

POSSIBLE SOLUTION

2.

Blown fuse or tripped breaker.

2.

Check fuse or breaker in home. Replace
fuse/reset breaker.

4.

Thermal Protector activated.

4.

Allow cleaner to cool - Pg. 3.

2.

Dirt containerfull.

2.

Empty dirt container- Pg. 8.

4. Brokenor worn belt.

4,

Replace belt - Pg, 10.

1. Dirt container full.

1. Empty dirt container- Pg. 8.

3.

3.

Cleaner WOn't run

Cleaner won't
pick-up or low
suction

Lean cleaner handle
back. Remove the one
(1)screw.

Pull bulb of of socket.
Do NOT twist. Gently
pushbulb into socket to
replace.

Using the end of
Flathead screwdriver,
gently pop open the
lens. Removelens.

Snap lens back into
place.Securethe headlight lens by replacing
the onescrew.
Dust escaping
from cleaner

WARNING:TO REDUCE
THERISKOFINJURYFROMMOVINGPARTS- UNPLUGBEFORESERVICING.

DEBRIS
REMOVAL/HOSE

DEBRISREMOVAL/
NOZZLEGUARD

Cleanertools won't
pick-up
1. Check to see if dirt container is full; empty
if needed.
2. Plug cleaner in and check to see if there is
any suction at end of hose. If there is suction
at end of hose, move on to Diagram4. If there
is no suction at the end of hose, follow these
steps: 1. Unwrap hose from caddy. Remove
obstruction. Check access door on back of
cleaner (near hose wand). Removethree (3)
screws and check for obstruction (Diagram1).
2. Removedirt container(Pg.B) andcheck dirt
container inlet locatedon cleaner (Diagram2).
3. Remove nozzle guard (see Diagram 3) by
removing the three (3) screws. Remove
obstruction.

DEBRISREMOVAL!POWER
BRUSHTOOL

Headlightnot
working

Hose not installed correctly.

1. Hose clogged.

1. Remove hose and tools; remove obstruction Pg, 6&11.

3. Oneor bothfiltersare clogged.

3. Removebothfilters andclean- Pg.8 & 9.

2.

2. Taketo servicecenter.To find nearestlocation,
visit our websiteat www.dirtdevil.comor call
1-800-321-1134.

Loose electrical wires.

Cleaner is difficult
to push or won't
move forward

ANY OTHER SERViCiNG SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE

CUSTOMERSERVICE (1-800-321=1134)
In the event that further assistance is required, see your Yellow Pagesfor an authorized Royal® Dealer or visit
our website at www.dirtdevil.com. Costsof any transportationto and from any placeof repair are to be paid by the
owner. The servicepartsused inthis unit are easilyreplacedandreadilyavailablefrom an authorizedRoyal® Dealeror
retailer. Always identify your cleanerby the model numberand manufacturingcode when requestinginformationor
orderingreplacementparts. (Themodelnumberappearson the bottomof the cleaner.)

LOCKINGRiNG
Rotatelocking ring 180° and
turn PowerBrush Tool over.

Review hose installation - Pg. 6.

Pivot lower housing and
removeclog.
11

To reassemble, be sure tabs
are engaged. Pivot the lower
housingclosed.
12



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 6
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Apr 06 00:21:39 2007
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools