Divoom Technology IFIT-3BT Multimedia Speaker System User Manual use manual
Shenzhen DIVOOM Technology Co., Ltd. Multimedia Speaker System use manual
User Manual

Multimedia Speaker System 
M/N: IFIT-3BT 
Shenzhen Divoom Technology Co., Ltd. 
Made in China 
Contents: 
1 pc of    IFIT-3BT speaker system 
1 pc of rechargeable USB cable 
1 pc of manual 
1 pc of stereo-stereo signal line 
Parts: 
1. Power switch 
2. audio input jack 
3. USB rechargeable 
4. Stand 
Connection: 
Listen to your Bluetooth-enabled music player: 
1. Turn on your bluetune-3 then the LED indicator starts blinking quickly 
2. Open the Bluetooth function in your device and search Bluetune-3 

3. Connect your device to Bluetune-3 Successfully, LED indicator stop blinking and show blue.   
4. Play the music in your device then enjoy your favorite music. 
Listen to your iPad, iPhone, Ipod or other mp3 players 
1. insert one end of 3.5mm stereo into the AUX IN jack on the back of the system then insert the 
other end into your audio source. 
2. Turn on audio source and play music 
3. Turn on the power of your speaker system 
4. Put your audio device on the stand of your IFIT-3 and start enjoying your music. 
Charge: 
Standard USB rechargeable jack compatible to all PC USB ports and AC adaptors 
Key Features: 
Play your favorite tunes fram any Bluetooth-equipped device while you control 
Space-saving design with stand to support all iPad, iPhone or iPod models. Even in cades; safely 
cardles your device in horizontal or vertical position. 
Portable-Rechargeable battery delivers up to 7 hours of playing time, you can take your music 
anywhere. 
“Po-Bass” technology produce deeper and more powerful bass in small body. 
Specifications: 
Output:  6W 
Driver size    2x2.5 inch 
Signal-to-noise   >80dB 
Frequency response    30Hz-20kHz 
Distortion  <0.5% 
Battery voltage   3.7V 
Battery capacity   700Mah 
Battery charging voltage      USB or AC/DC adaptor 5V 
Charge time        USB 3 hours, DC(2.5 hours) 
Bluetooth compliant: V2.1+EDR 
Bluetooth profile support: A2DP 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation. 
changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment. 
NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures: 
-- Reorient or relocate the receiving antenna. 
-- Increase the separation between the equipment and receiver. 
-- Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected. 
Consult the dealer or an experienced radio/TV technician for help 
Warning: 
Read these instructions. 
Keep these instructions. 
Heed all warnings. 
Follow all instructions. 
Place the speakers in a stable location so they will not fall causing damage to the speakers or 
bodily harm. 
Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on 
them. 
Do not block the openings in the speaker cabinets, never push objects into speaker vents or slots 
because of fire or electric shock hazards, and provide sufficient space around the speakers for 
proper ventilation. 
Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus(including amplifiers) that produce heat. 
Only use attachments/accessories specified by the manufacturer. 
Unplug this apparatus when unused for long periods of time. 
Do not place any form of open flame source, such as lighted candles, on the apparatus. 
The apparatus shall not be exposed to dripping of splashing, no objects filled with liquids, such as 
vases, shall be placed on or near the apparatus. 
Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or 
moisture.