Divoom Technology ONBEAT-500 MULTIMEDIA SPEAKER SYSTEM User Manual Warning
Shenzhen DIVOOM Technology Co., Ltd. MULTIMEDIA SPEAKER SYSTEM Warning
User Manual
USER Manual ONBEAT-500 Warning Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Install in accordance with the manufacturer’s instructions. Place the speakers in a stable location so they will not fall causing damage to the speakers or cause bodily harm. Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. Do not block the openings on the speaker cabinets, never push objects into speaker vents or slots because of fire or electric hazards, Please insure reasonable space around the speakers for proper ventilation. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Do not place near any form of open flame source, such as lighted candles, on the apparatus. Do not get the speaker wet. Refer all servicing to qualified service personnel. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Welcome: Thank you for purchasing this Divoom® product. Onbeat-500 is best-sounding wireless speaker and speakerphone around. Just place it anywhere in a room and enjoy pristine streaming audio from your phone, computer, or other Bluetooth devices Package contents 1 pc of onbeat-500 1 pc of USB recharging cable 1 pc of audio cable 1 pc of user Manual PARTS: 1. AUX in 2. Micro USB charging port 3. on/off button 4. Multifunction button 5. Volume “+”/next 6. Volume “- ” /prev 7 Speaker units 8 Passive speaker Connection ●Listen to your Bluetooth-enabled music player: 1. Turn on your Onbeat-500, then the blue led indicator starts blinking quickly, enter pairing mode 2. Open the Bluetooth function in your device and search Onbeat-500 3. Connect your device to Onbeat-500 successfully; Start music play on your Bluetooth device 4. Flip the “multifunction button” to pause your music. 5. Long press “-”/ “+“for prev and next song When there is an incoming call: Press Bluetooth button to pick up the call Press Bluetooth button to hang up the call Switching between paired devices: Switch between your current connected device to your previous connected device by following these steps Action: Long press“ multifunction button” Indicators LED blinks and stay lit in Blue Status Ready to stream music ● How to connect to your device using NFC (Near Field communication)? If using a device that is NFC enabled, turn on NFC, then simply touch the device to Onbeat-500 on the NFC logo to quickly make a connection ●Listen to your non-Bluetooth-enabled audio device 1. Insert one end of 3.5mm audio connector into the “audio in” jack of Onbeat-500 2. Insert the other end of audio connector into your audio device 3. Turn on you audio device and start the music playing. 4. Adjust the volume in your audio device only. 5. Enjoy your favorite music. How to charge it? Standard USB rechargeable jack compatible to all PC USB ports and AC adaptors Features 1. Powerful sound from 2.1 design and a proprietary passive bass radiator 2. Tap-to-pair NFC technology for easy and instant Bluetooth connection 3. Built-in powerful speakerphone, makes and takes call from your computer, tablet or mobile phone 4. Rechargeable li-ion battery for 8 hours playback Specification Dimensions Weight Driver size Output power Frequency Response Signal-to-Noise Ratio Playback Time Battery Capacity Battery Voltage Battery Charge Time Wireless Range Bluetooth Compliant Bluetooth Profile support Talk Time Microphone sensitivity 225L x 75W x 105H mm 1172 g subwoofer; 3” satellite: 2”x 2 13W (subwoofer: 5W; satellite: 4W X 2 ) 60-20000Hz ≥75 dB Up to 8 hours 3000 mAh 3.7 V 4 h hours Up to 10 meters/33 feet V2.1 + EDR A2DP Stereo Up to 8 hours -36 db Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Shenzhen Divoom Technology Co., Ltd may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 5 Create Date : 2013:06:21 18:48:20+00:00 Modify Date : 2013:06:21 18:48:20+00:00 Title : Warning Author : User Creator : WPS Office 个人版EXIF Metadata provided by EXIF.tools