03_Product_Summary_Software 03 Product Summary Software
03_Product_Summary_Software 03_Product_Summary_Software
User Manual: 03_Product_Summary_Software
Open the PDF directly: View PDF 
.
Page Count: 57
| Download | |
| Open PDF In Browser | View PDF |
----- --- -- ----..:. ..:.: == ';' == ISG
Do not reproduce without written permission
PSS.1
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
This section lists the software title as shown in the PP, SCP, and PO pages and the text included under "Purpose". IVP and FDP text is
omitted. The software products are in product number sequence.
IMPLEMENTATION PACKAGES for the
65S0 DISPLAYWRITER SYSTEM
ADMINISTRATIVE SUPPORT ... 560S-AX1
APPLICANT PROCESSING ." 560S-AX2
PERSONNEL REPORTING ... 560S-AX3
These 6580 Implementation Packages assist 6580 Displaywriter System
users in setting up specific applications using 6580 Displaywriter
System Textpack 4 (5608-TR4) or Textpack 6 (5608-TR6). Each
package consists of three components: A procedure guide for the
operator, a prerecorded diskette and a catalog of reports for principals.
The prerecorded diskette can be used to establish files with unique data
for each ap~lication. The Operator's Guide can be used to step through
all the functions necessary to implement and maintain specific files and
produce the identified application reports or letters.
65S0 DISPLAYWRITER SYSTEM
CHARTPACK
560S-SRA
The Ch,artpack program provides the capability to produce various types
of business charts. Charts that can be created are bar charts, line
charts, pie charts, and free-form charts (such as organization oharts).
All of these charts can be displayed and revised using either 25-line or
large display models of the 6580 Displaywriter equipped with a
Chartpack display adapter card (feature #6955). Charts can be stored
on diskette, merged to print with text documents, and printed on 5218
and 5228 Printwheel Printers with printwheels designed for use with
Chartpack.
65S0 DISPLAYWRITER SYSTEM
DATA STREAM COMPATIBILITY
5608-SR6
The 6580 Displaywriter 3270 Data Stream Compatibility enables a
properly configured 6580 Displaywriter System to appear as a specific
configuration of a 3274 Control Unit to supported host systems. Those
host systems currently supported are the S/370, 4331, 4341, 3031,
3032, 3033, 3081, and 8100. The 3274 configuration supported is the
mdl 51 C (with Configuration Support C), with a single 3278 mdl 2 or
mdl 4 Display (with an 87-key EBCDIC typewriter keyboard).
SNA/SDLC communications may be by switched network at up to
4800 bps, or by nonswitched, point-to-point or multipoint at up to
9600 bps.
65S0 DISPLAYWRITER SYSTEM LANGUAGEPACK 2
560S-SR7
The 6580 Displaywriter System Languagepack 2 program contains
spelling dictionaries in eleven languages for use primarily with the
spelling aid contained in 6580 Displaywriter System Textpack 4
program (5608-TR4) and Textpack 6 program (5608-TR6) to support
the automatic hyphenation of these programs. Languagepack 2 will
also support a level of spelling verification aid in Textpack 2 and
Textpack 3.
65S0 DISPLAYWRITER SYSTEM
ELECTRONIC DOCUMENT DISTRIBUTION
560S-SRS
The 6580 Displaywriter System Asynchronous Communications
program provides the functions necessary to send information to and
receive information from other 6580 Displaywriter Systems or other
compatible communicating equipment.
The 6580 Electronic Document Distribution program provides thE' 6580
Displaywriter System with the functions required to perform the
following in an SNA/SDLC communications environment: Document
distribution with remote Displaywriters and certain other IBM office
systems within a communication network through the facilities of
Distributed Office Support S/370 (DISOSS/370) Version 3 '" access to
the DISOSS/370 Version 3 document library services '" direct
exchange of documents with another Displaywriter via SNA telecommunications without the need for host assistance.
65S0 DISPLAYWRITER SYSTEM
BINARY SYNCHRONOUS COMMUNICATIONS
560S-SR2
65S0 DISPLAYWRITER SYSTEM
3270 ATTACHED WORKSTATION
560S-SR9
65S0 DISPLAYWRITER SYSTEM
ASYNCHRONOUS COMMUNICATIONS
560S-SR1
The 6580 Displaywriter System Binary Synchronous Communications
program provides the functions necessary to send documents to and
receive documents from other 6580 Displaywriter Systems or other
compatible communicating equipment. (Documents received by other
compatible communications equipment may need additional editing or
reformatting if revisions are necessary.)
65S0 DISPLAYWRITER SYSTEM
MAGNETIC CARD CONVERSION
560S-SR3
The 6580 Displaywriter System Magnetic Card Conversion program
provides the functions necessary to support the interaction between
magnetic cards read or recorded in the 6580 Displaywriter 6361 Mag
Card Unit and the 6580 Displaywriter System.
65S0 DISPLAYWRITER SYSTEM LANGUAGEPACK
560S-SR4
The 6580 Displaywriter System Languagepack program contains
spelling dictionaries in eight languages for use with the spelling
verification aid contained in the 6580 Displaywriter System Textpack 2
program (5608-TR2) and Textpack 3 program (5608-TR3).
65S0 DISPLAYWRITER SYSTEM REPORTPACK
560S-SR5
The 6580 Displaywriter System Reportpack program provides for the
creation, maintenance, and printing of files.
The 6580 Displaywriter System 3270 Attached Workstation program
provides the user the convenience of both Displaywriter and 3270 host
system functions in a single workstation. This program allows the
Displaywriter to emulate functions of the 3278 Display and the 3287
Printer when the Displaywriter workstation is attached through coaxial
cables to a 3274 Control Unit or 3276 Control Unit Display Station.
Displaywriters may also attach to the 4321 and 4331 Processors and
the 4701 Finance Communication Controller through the integrated
adapters supporting the 3278 Display mdl 2 and the 3287 Printer mdls
1 and 2. In addition to providing 3270 emulation, documents can be
transferred in either direction between the Displaywriter diskette and an
appropriately programmed host system. Also, with a simple keystroke
operation, the user can alternate between Displaywriter text functions
and 3270 applications.
6580 DISPLAYWRITER SYSTEM TEXTPACK E
560S-TRE
The 6580 Displaywriter System Textpack E program provides the
functions for text processing and operator assistance.
65S0 DISPLAYWRITERSYSTEM TEXTPACK 1
560S-TR1
The 6580 Displaywriter System Textpack 1 program is designed to
oper~te on the 6580 Displaywriter System. The Textpack 1 program
provides for text entry, revision and a Spelling Verification Aid (English
version programs only) through the use of a workstation. Printed output
is also controlled by this program.
65S0 DISPLAYWRITER SYSTEM TEXTPACK 2
560S-TR2
The 6580 Displaywriter System Textpack 2 program is designed to
operate on the 6580 Displaywriter System. The Textpack 2 Program
provides for text entry, revision, and a Spelling Verification Aid. Printed
output is also controlled by this program.
-----=::-:.
ISG
--- ---:§~~
Do not reproduce without written permission
PSS.2
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
6580 DISPLAYWRITER SYSTEM TEXTPACK 3
5608-TR3
The 6580 Displaywriter Textpack 3 program provides for text processing, a spelling function verification aid, and statistical typing.
6580 DISPLAYWRITER SYSTEM TEXTPACK 4
5608-TR4
The 6580 Displaywriter System Textpack 4 program provides functions
for text processing, a spelling verification aid, statistical typing, and
records instructions [used with the 6580 Displaywriter Reportpack
program (5608-SR5)].
6580 DISPLAYWRITER SYSTEM TEXTPACK 6
5608-TR6
The 6580 Displaywriter System Textpack 6 program provides functions
for text processing, operator assistance, a spelling verification aid,
statistical typing, automatic footnote processing, automatic outlining,
automatic column reference/column heading display, key-to-print,
menu bypass enhancement, keystroke storage, recall, editing, an
electronic spelling dictionary and records instructions.
5520 ADMINISTRATIVE PROCESSING PROGRAM
5611-SS1
The 5520 Administrative Processing Program provides support to
relieve the user of any programming requirement on the 5525 mdls 20,
30, 40 and 50.
5520 ADMINISTRATIVE PROCESSING PROGRAM
RELEASE 2 (5611-SS2)
The 5520 Administrative Processing Program Release 2 provides
support for the 5525 mdls 21, 31, 32, and 51, without the requirement
of any user programming on the 5525.
OPERATING SYSTEM/VIRTUAL STORAGE 1 (OS/VS1)
5741-VS1 (Through Release 6.7)
5652-VS1 (Release 7 on)
The Operating System/Virtual Storage 1 (OS/VS1, also known as VS1)
programs perform the systems control programming functions for the
S/370 mdls 135, 135-3, 138, 145, 145-3, 148, 15511, 158, 16511, 168,
the 3031, 3032 and 3033 Processors, and the 4331 (Model Group 11 is
not supported) and 4341 Processors utilizing Dynamic Address
Translation (OAT), and the Extended Control Mode (EC) of these
systems.
VSE/ONLINE TEST EXECUTIVE PROGRAM
VERSION 1.1.0 (VSE/OLTEP)
5656-092
VSE/Online Test Executive Program (VSE/OLTEP) SCP Version 1
Release 1 Modification Level 0 is a Class 2 SCP program and is used by
IBM Customer Engineers only. The purpose of the new OLTEP
Generation Program (OLTGEN) is to produce a VSE/OLTEP-LNKEDTstream (CDS and OLTs), which is ready to be cataloged into the
systems core image library in order to run online tests. The CDS
information can be specified manually or can be selected from the OLT
master tape by specifying the physical device address or the symbolic
name.
All CDS records can be duplicated and/or their
addresses/symbolic names can be modified. The OLT programs
required for the installation will be selected by specifying the device
types.
3694 INDEPENDENT RELEASE 1.0
5658-001
The 3694 Independent Release 1.0 (JR1.0) is a System Control Program.
This independently-released System Control Programming contains the
CPGEN macros which extend the 3600 Finance Communications
System's CPGEN support to the 3694 Document Processing System.
These macro definitions allow description of the 3694 devices in the
same manner as 3600 devices are described, and allow description of
unique 3694 macro parameters.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DISTRIBUTED PRESENTATION SERVICES
VERSION 1, DPPX/DPS V1 (5760-XR1)
VERSION 2, DPPX/DPS V2 (5660-264)
These program products form an upward compatible family of
ease-of-use aids for programmers of the 8100 Information System
with
Distributed
Processing
Programming
Executive
Base
(DPPX/BASE) which provide a set of device and format independent
application functions. These functions. simplify the programming of a
wide range of I/O devices available on the 8100: Displays and their
associated keyboards, line printers and, for output only, keyboard
printers. All aspects of programming can benefit - design, implementation, testing and maintenance.
8100 INFORMATION SYSTEM
DEVELOPMENT MANAGEMENT SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DMS/DPPX FEP1
DEFINITION (5760-XC2) - EXECUTION FACILITY (5660-265)
Development Management System/Distributed Processing Programming Executive provides an interactive interface for developing, testing,
generating and executing application programs in an IBM DPPX
environment. It is highly compatible with the OMS Cross-System
Product for SSX/VSE, and for CICS/VS, TSO and VM/CMS ...
DMS/DPPX Definition includes the facilities for developing, testing and
generating DMS/DPPX applications ... DMS/DPPX Execution Facility
provides for production execution of DMS/DPPX applications.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PRESENTATION SERVICES for 3640 TERMINALS
DPPX/PS3640 (5660-267)
This licensed program is an ease-of-use aid for users of the 8100
Information System with Distributed Processing Programming Executive
Base (DPPX/BASE) or the Distributed Processing Programming
Executive/System Product (DPPX/SP) which provides presentation
services support, including transaction invocation, formatting, editing,
message assembly, message buffering and time-of-day broadcasting,
for selected 3640 terminals. These functions simplify the programming
on the 8100 of the 3640 terminals, specifically the 3641, 3642, 3644,
3646 and the 3647. All aspects of programming can benefit - design,
implementation, testing and maintenance.
DISTRIBUTED PROCESSING PROGRAMMING
EXECUTIVE/INTERACTIVE PRODUCTIVITY FACILITY
IPF RELEASE 1 (5660-271)
The DPPX/lnteractive Productivity Facility (lPF) provides a simplified,
full-screen, interactive interface to the DPPX command facility. It is
designed to enhance the usability and productivity of 8100/DPPX
systems by both central and remote site users.
DISTRIBUTED PROCESSING PROGRAMMING
EXECUTIVE/INTERACTIVE PRODUCTIVITY FACILITY
RELEASE 2 (5660-271)
The DPPX/lnteractive Productivity Facility (lPF) provides a simplified,
full-screen, interactive interface to the DPPX command facility. It is
designed to enhance the usability and productivity of 8100/DPPX
systems by both central and remote site users.
Release 2 is an enhancement to the current release of DPPX/lnteractive
Productivity Facility. Enhancements have been made to System
Operations dialogs in the area of Printer Sharing and Diskette Volume
utilities; System Use dialogs in the area of Browse, Edit, Dataset
utilities, Catalog utilities and Copy utilities. A new dialog has been
included to allow execution of DPPX Commands and CLiSTs directly
from DPPX/lnteractive Productivity Facility.
------ --- --
-
---
.=.:::..::S~§: ISG
Do not reproduce without written permission
PSS.3
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PROBLEM DETERMINATION APPLICATION
DPPX/PDA (5660-272)
DPPX/PDA program provides improved central network management
for 8100 Information Systems. DPPX/PDA will reside in the 8100 and
will work in conjunction with the Network Problem Determination
Application Version 2 (NPDA V2) and the Network Communications
Control Facility Release 2 (NCCF R2) in a host S/370 or 4300.
DPPX/PDA will interface with the DPPX error log, analyze errors that
have occurred, and notify the host NPDA V2 which in turn will notify the
central network operator who can take appropriate action. DPPX/PDA
will also accept alerts originated by devices attached to the 8100 as well
as alerts generated by DPPX applications, and pass them through to the
host NPDA V2.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PROGRAMMED OPERATOR FACILITY
5660-273
The DPPX/Programmed Operator Facility provides the ability to service
messages directed to the system operator with programmed responses.
It is designed to reduce the skills and effort required to operate an 8100
Information System with DPPX/BASE at a remote site.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING
EXECUTIVE/SYSTEM PRODUCT (DPPX/SP)
5660-281
8100 Information System Distributed Processing Programming
Executive/System Product (DPPX/SP) is a licensed program designed
for distributed data processing applications running on 8100 Information Systems.
It provides multi-programming, multi-user and
multi-level system support for concurrent application environments.
Interactive, batch, and plant floor applications are supported. DPPX/SP
provides a variety of functions to communicate with S/370, 30XX,
4300, other 8100 systems, and terminals. There are facilities to simplify
installation, application design, program development and system
operation. DPPX/SP provides general usage system support which
may be tailored or modified to suit unique requirements. DPPX/SP
includes a Migration Aid feature to assist users in migrating from
DPPX/BASE.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING
EXECUTIVE/SYSTEMS PRODUCT
INTERACTIVE MAP DEFINITION (DPPX/SP IMD)
5660-282
The Interactive Map Definition program is designed to run with
DPPX/SP. It generates maps which exploit the enhanced functions
provided by the DPPX/SP Format Management component. These
maps form the basis of easy-to-use, device and format independent.
full-screen device support for DPPX/SP. DPPX/SP IMD is upwards
compatible with the DPS Version 2 Interactive Map Definition feature
and creates source maps to extended DPS V2 map specifications.
OS/VS1 BASIC PROGRAMMING EXTENSIONS
5662-257
The OS/VS1 Basic Programming Extensions program product is
supported on S/370, the 3031, 3032, 3033 or 4331 and 4341
processors in S/370 mode. It provides support for the 4331 Model
Group 2 Processor, the 3262 Printer mdls 1 and 11, the 3848 Cryptographic Unit, the 3375 Direct Access Storage, the 4341 Model Group
10 and 11 Processors and enhanced dump facilities.
TELEPROCESSING NETWORK SIMULATOR
VERSION 2 RELEASE 2
TPNS (5662-262)
Teleprocessing Network Simulator (TPNS) is a telecommunications
testing package that enables a user to test and evaluate application
programs, communications access methods, and communication
control programs without the use of actual terminals. The purpose of
TPNS is to provide controlled generation of message traffic into a
telecommunications subsystem or application through the use of
processing rather than by large amounts of terminal hardware and
terminal operator time. TPNS provides the ability to simulate a
specified network of terminals and their associated messages, allowing
the user to alter network conditions and message loads during a run.
Thus, TPNS can be used to stress-test telecommunications application
programs with volume messages to evaluate the reliability and
approximate performance characteristics under expected operating
conditions.
ADVANCED TELECOMMUNICATIONS FUNCTION
for VTAM (ACF/VTAM) Version 2 Release 1
OS/VS1 (5662-280)
OS/VS2 MVS (5665-280)
VSE (5666-280)
Advanced Communications FunctionforVTAM (ACF/VTAM) Version 2
extends subsystem support, offers new and enhanced capabilities,and
adds support of the communications adapter on the 4321 and 4331
processors (VSE only). Advanced Communications Function for VTAM
Version 2 Release 1 (ACF/VTAM V2 R1) is a program product for users
of OS/VS2 (MVS), OS/VS1 and VSE that offers additional capabilities
for networks with single or mUltiple S/370, 30XX and 4300 processors
in the areas of data communications, problem determination, ease-ofuse, and network configuration, operation, management and control.
ACF /VTAM Version 2 incorporates mUltisystem networking capabilities. Also included is support of the communications adapter for VSE
systems, and channel-to-channel connections for OS/VS systems.
VIRTUAL MACHINE/SYSTEM PRODUCT
VM/SP (5664-167)
The VM/System Product provides usability and performance extensions to VM/370; it is recommended for users running DOS/VS, VSE,
VS 1, SVS and MVS under VM 1370 on processors supported by those
SCPs, or users with high-speed paging devices, and CMS intensive
users. The VM/System Product is designed to run on S/370 mdls 135,
135-3, 138, 145, 145-3, 155 II, 158, 158-3, 158AP, 158MP, 165 II,
168, 168-3,168AP, 168MP and on 4321, 4331,4331 Model Group 2,
4341,4341 Model Group 2, 3031, 3031AP, 3032, 3033 Model Group
N, 3033, 3033S, 3033AP, 3033AP-2, 3033MP, and the 2K storage
protect key version of the 3081 D16 Processor Complex in S/370
mode.
VIRTUAL MACHINE/EXTENDED ARCHITECTURE
MIGRATION AID (5664-169)
The VM/XA Migration Aid is provided for the MVS user who will be
migrating to MVS/XA. It is designed to operate on any 3081, 3083 or
partitioned 3084 Processor. Its purpose is to support, concurrently, one
MVS/SP production virtual machine and one or more MVS/XA test
machines. VM/System Product CMS will be supported for VM/XA
Migration Aid installation and service, and for MVS/XA conversion
requirements. The objectives of the VM/XA Migration Aid are:
Maximize performance and provide high availability and recoverability of
the MVS/SP production machine ... support one or more MVS/XA test
machines with extended test facilities.
INTERACTIVE SYSTEM PRODUCTIVITY FACILITY /
PROGRAM DEVELOPMENT FACILITY VM
ISPF/PDF VM (5664-172)
The I nteractive System Productivity Facility / Program Development
Facility for VM (ISPF/PDF VM) program aids in the development of
applications, including dialogs. It uses display terminals in an interactive environment to assist with many programming tasks. The
Interactive System Productivity Facility (lSPF) and ISPF /PDF VM are
related IBM program products. Together, they are designed to increase
user productivity in the development of applications by taking
advantage of the features of display terminals. They contain special
functions for the development and use of interactive applications
(dialogs). ISPF/PDF VM requires the use of ISPF.
VM/SYSTEM PRODUCT HIGH-PERFORMANCE OPTION
5664-173
VM/SP High-Performance Option is a performance-oriented extension
to VM/System Product for the high-end user. It is recommended for
users who can utilize the capability of the 308X Processor Complex;
users who can benefit from performance and RAS enhancements to
MVS guest machine environments; and users who can benefit from
performance enhancements in the CMS intensive environment.
PROFESSIONAL OFFICE SYSTEMS (PROFS)
5664-176
The Professional Office System (PROFS) program is designed to
provide a comprehensive and easy-to-use set of office system and
principal support functions for non-DP and DP users. Operating as a
VM/SP application program, PROFS offers a wide range of automated
office functions for the executive, professional, and secretary.
Electronic preparation, storage, retrieval, and dissemination of office
correspondence within a single system or across multiple VM/SP
systems can contribute to increased productivity and improved
communications.
---- ------
.:. =:: :S~5: ISG
Do not reproduce without written permission
PSS.4
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
SCREEN DEFINITION FACILITY/CICS
CMS RELEASE 1.0 (5664-178)
OS/VS RELEASE 4.0 (5740-XYF)
DOS/VSE RELEASE 4.0 (5746-XXT)
Screen Definition Facility/Customer Information Control System
(SDF/CICS) is an online application development tool for the CICS/VS
application programmer who wants to define or edit maps, map sets,
and partition sets for the CICS/VS Basic Mapping Support (BMS). The
online operation and the ease-of-use-oriented functions of the tool
enhance productivity in development and maintenance. This tool is
provided as three functionally equivalent program products which are
designed for use in the following environments:
SDF/CICS OS/VS: Online functions can be used either under
CICS/VS or, alternatively and new with Release 4.0, under TSO. Batch
functions of SDF/CICS can be executed under any batch partition or
region; under TSO they can also be invoked for foreground execution.
BASIC TELECOMMUNICATIONS ACCESS METHOD/
SYSTEM PRODUCT
5665-279
The facilities of the Basic Telecommunications Access Method/System
Product (BTAM/SP) provide the basic tools required to write a
telecommunications program. These include facilities for creating
terminal lists and for performing the following operations: Initiating and
answering calls to and from terminals on switched networks ... Polling
and addressing terminals on nonswitched multipoint lines ... Changing
the status of terminal lists ... Transmitting and receiving messages ...
Code translation ... Retransmitting messages which are received with
detected errors ... Providing online terminal test facilities .,. Keeping
error statistics.
VIRTUAL STORAGE PERSONAL COMPUTING (VSPC)
OS/VS2 VSPC (MVS) V2 R1 (5665-283)
SDF/CICS VSE: Online functions can be used either under CICS/VS
or, alternatively and new with Release 4.0, under ICCF. Batch functions
of SDF/CICS can be executed under any batch partition or region;
under ICCF they can also be invoked for foreground execution.
Virtual Storage Personal Computing (VSPC) is a set of program
products that provides DOS/VS, OS/VS1 and OS/VS2 (MVS) users at
terminals a choice of responsive tools, in an interactive environment, to
help support their personal computing and problem solving activities.
SDF/CICS CMS: Online functions of SDF/CICS and SDF/CICS
utilities can be invoked under CMS. SDF/CICS libraries are implemented asVSAM clusters. VM/lnteractive File Sharing (5748-XXC) is
used for accessing these libraries, and is thus a prerequisite for using
this product. The CMS batch facility cannot be used for SDF/CICS
CMS because of a VM/IFS restriction.
VSPC was designed to offer a comprehensive set of functions for data
and source program manipulation that are tailored for end-users
without extensive data processing knowledge. VSPC also offers the
ability to submit jobs for batch processing and to retrieve job output at
the user's terminal.
INTERACTIVE SYSTEM PRODUCTIVITY FACILITY/
PROGRAM DEVELOPMENT FACILITY for MVS
ISPF/PDF MVS (5665-268)
The Interactive System Productivity Facility/Program Development
Facility for MVS (lSPF/PDF MVS) program aids in the development of
various types of applications, including dialogs. It uses display
terminals in an interactive environment to assist with many programming tasks. The Interactive System Productivity Facility (lSPF) and
ISPF/PDF MVS are related IBM program products. Together, they are
designed to increase user productivity in the development of applications by taking advantage of the features of display terminals. They
contain special functions for the development and use of interactive
applications (dialogs). ISPF/PDF MVS requires the use of ISPF.
RESOURCE MEASUREMENT FACILITY (RMF)
VERSION 3 RELEASE 1
5665-274
The Resource Measurement Facility (RMF) Version 3 provides
measurements that will help the installation to monitor the workload
and use of resources in a 3081 Processor Complex running
MVS/System Product Version 2.
RESOURCE MEASUREMENT FACILITY (RMF)
VERSION 3 RELEASE 2
5665-274
The Resource Measureme~t Facility (RMF) Version 3 Release 2 program
Incorporates all the functions of RMF Version 3 Release 1 and, in
addition, offers a workload delay monitor and a virtual storage activity
report.
INFORMATION/LIBRARY
RELEASE 1
5665-277
Information/Library is a dialog-oriented program providing search and
retrieval functions for a companion data base Library/MVS, Program
Number 5665-294. The data base contains MVS system reference and
program logic information. This information reflects the structure of the
publications and consists of titles, abstracts, tables of contents,
headings, indexes and full text for selected manuals (such as OS /VS
System Message Library: VS2 System Messages.
INFORMATION/LIBRARY
RELEASE 2 Modification Level 0
5665-277
Information/Library is a dialog-oriented program providing search and
retrieval functions for the companion data base product Library/MVS.
Installations can also use Information/Library with a data base
consisting of user documentation, or with a concatenated data base
containing both information from Library/MVS and user documentation.
MVS/XA DATA FACILITY PRODUCT
RELEASE 1
MVS/XA DFP (5665-284)
The MVS/XA Data Facility Product (MVS/XA DFP) program provides
the MVS/Extended Architecture (MVS/XA) operating system
environment with data management, device support, program library
management, and utility functions for IBM processors operating in
Extended Architecture mode. Previous to MVS/XA these functions
were provided in OS/VS2 MVS Release 3.8 for S/370 users.
TSO EXTENSIONS (TSO/E)
MVS/370 (5665-285)
MVS/XA (5665-293)
The TSO Extensions (TSO/E) program incorporates all the functions of
the TSO Command Package (5740-XT6) and in addition provides the
TSO user with new function, improved usability, and performance
improvements. It will benefit centralized as well as distributed
interactive systems. Non-DP professional end-users as well as
programming professionals will benefit from use of the TSO/E program
product. .This product. is intended to complement full screen System
Productivity Facility (SPF) environments as well as enhancing line
command terminal environments. The TSO/E licensed program is
designed to operate in either an MVS/370 or MVS/XA envirOnment.
The TSO/E, for MVS/XA systems (5665-293), provides the TEST
command function in the MVS/XA environment. It therefore is
required if TEST is to be used on an MVS/XA system.
MVS/OPERATOR COMMUNICATION CONTROL FACILITY
MVS/OCCF (5665-288)
MVS/OCCF is a program which allows one or more remote MVS
systems to be operated from a host MVS system. It will reside in the
remote system(s) and optionally in the host.
DISTRIBUTED OFFICE SUPPORT SYSTEM/370
(DISOSS/370) VERSION 3
OS/VS2 (5665-290) - VSE (5666-270)
DISOSS/370, an Office Systems host support program providing host
document library and distribution functions, has been enhanced to
support the 6580 Displaywriter System, the IBM Scanmaster I, and to
allow interchange of final form documents among the 8100/DOSF,
Displaywriter, and Scanmaster I. The functional support for the 5520
Administrative Processing Program is equivalent to that provided with
DISOSS/370 Version 2 Release 1. Support continues for the functions
provided by previous DISOSS/370 versions for users of the Distributed
Office Support System/8100/DOSF. DISOSS/370 Version 3 is
designed to operate under the control of OS/VS2 MVS or VSE, and
CICS/VS.
------- -------==:: :5~E: ISG
Do not reproduce without written permission
PSS.5
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
MVS/SYSTEM PRODUCT-JES2 VERSION 2 RELEASE 1
Modification Level 1 (5740-XC6)
MVS/SYSTEM PRODUCT-JES3 VERSION 2 RELEASE 1
Modification Level 1 (5665-291)
INFORMATION/SYSTEM VERSION 2
MVS/TSO (5665-952)
Information/System Version 2 program assists a user in managing a
data processing installation by providing an online, interactive facility for
collecting, managing, displaying and reporting information frequently
needed. Information/System is the base product that provides the
mechanism for loading, searching, reviewing and reporting user data.
Its functions and utilities are used by the optional companion licensed
programs Information/Management Version 2 and Information/MVS or
Information /VM - VSE.
MVS/SP 2.1.1 is an enhancement to the first release of MVS/System
Product Version 2 (which will be identified as MVS/SP 2.1.0 in this
document).
MVS/SP 2.1.1 contains additional virtual storage
constraint relief over the prior release, additional serviceability items for
large system complexes, and additional operational improvements and
device support. MVS/SP 2.1.1 incorporates most of the new functions
announced for MVS/SP Version 1 Release 3.0, MVS/SP Version 1
Release 3.1, MVS/SP Version 1 Release 3.2 and MVS/SP Version 1
Release 3.3.
Information/System Version 2 is intended to replace Information/
System Version 1 (5735-0ZS) for the MVS environment. Additional
function and usability enhancements have been included in Version 2.
VECTOR PROCESSING SUBSYSTEM/
SYSTEM PRODUCT (VPSS/SP)
5665-292
INFORMATION/MANAGEMENT
MVS/TSO VERSION 2
5665-953
Vector Processing Subsystem/System Product (VPSS/SP) program
product provides significant new error recovery improvements to the
existing functions of the VPSS Independent Release (SU56). Additional
error detection and recovery actions for the 3838 Array Processor can
improve throughput by increasing the availability of the 3838 Array
Processor.
Information/Management Version 2 is used in conjunction with
Information/System Version 2 to help manage information about
problems,
changes
and
component
configurations.
With
Information/Management, the user may create, display, update, print
and delete records that document the installation's data processing
problems, changes and configuration information. These records are
stored in the Information/System data base and can be searched
according to the user's criteria. Information/Management Version 2 is
intended to replace the Information / Management feature of
Information/System Version 1 (5735-0ZS). Additional function and
usability enhancements have been included in Version 2.
LIBRARY /MVS
5665-294
Library / MVS is a companion data base to the dialog-oriented program
product Information/Library which provides search and retrieval
functions for this data base.
MVS/370 DATA FACILITY PRODUCT
RELEASE 1
5665-295
MVS/370 Data Facility Product (DFP), a program similar to the Data
Facility Product previously announced for the MVS/XA environment, is
now announced for MVS/370. MVS/370 DFP is a new program
product containing new functions along with data management, device
support, program library management, and utility functions for the
OS/VS2 MVS Release 3.8 environment with MVS/System Product
Version 1 Release 3 installed.
CHARACTER CONVERSION AID
5665-299
The Character Conversion Aid program provides support for the 3800
mdl 3 Printing Subsystem. This conversion aid is designed to reduce
the effort required to convert graphic characters designed for the 3800
mdl 1 to the new pel density (240 x 240 pels per square inch) required
for the 3800 mdl 3. The primary use is for converting graphic
characters created by customers, since all IBM-supplied 3800 mdl 1
character sets will be provided by IBM in the new print density.
VECTOR PROCESSING SUBSYSTEM/
EXTENDED ARCHITECTURE (VPSS/XA)
5665-301
The VPSS/Extended Architecture program (VPSS/XA) provides
support for the 3838 Array Processor when it is attached to a host
operating in S/370 Extended Architecture mode. VPSS/XA incorporates all the functions of the VPSS independent release (SU56) and the
VPSS/System Product (5662-292). In addition, VPSS/XA provides an
application program interface for users of the S/370 Extended
Architecture (S,370-XA), allowing VPSS/XA users to take full
advantage of the 31-bit addressing capabilities of S/370-XA.
MVS FINANCIAL MANAGEMENT SYSTEM
RELEASE 1 (5665-309)
MVS Financial Management System program offers a framework for
creating financial systems to be used in various accounting applications
such as general ledger, cost control, budgeting, reporting and
consolidation.
REPORT MANAGEMENT AND DISTRIBUTION SYSTEM
RELEASE 1.0 (5665-310)
The Report Management and Distribution System is a series of
programs which provide the MVS user with a system to store, protect,
view and print system output on demand. This system gives the user
the potential for reducing operational costs, decreasing report
turnaround time and increasing report handling productivity.
INFORMATION/MVS
5665-955
The Information/MVS program is a consolidated collection of IBM
technical data of interest to data processing staffs responsible for
planning, installing, supporting and tuning IBM systems, subsystems
and components appropriate to the MVS, VM/370, VSE and VS1
environments. When used in conjunction with Information/System, it
provides processing personnel with keyword access to a wide range of
selected technical information regarding IBM products.
FINANCIAL MANAGEMENT SYSTEM FOR DOS/VSE
RELEASE 1 MODIFICATION LEVEL 0
5666-263
Financial Management System for DOS/VSE is designed to provide a
framework for creating financial systems to be used in the following
application areas: General ledger systems - financial accounting ... Cost
planning and control... Project accounting ... Budgeting (at various
levels) ... Cash management ... Financial planning ... Consolidation from
unified or separate charts of accounts.
DISTRIBUTED OFFICE SUPPORT SYSTEM/370/VSE
RELEASE 1
DISOSS/VSE (5666-264)
Distributed Office Support System/VSE (DISOSS/VSE) program
provides document-handling extensions to subsystems like the 3730
Distributed Office Communication System or the 8100 Information
System available with the Distributed Office Support Facility (DOS F). It
operates on a host computer, such as the S/370, 3031 Processor or the
4300 Processors, under VSE and the Customer Information Control
System/Virtual Storage (CICS/DOS/VS) program product. It offers
both interactive and deferred communication with the Distributed Office
Support System (5740-XYK), operating in an 3730 System or an 8100
System under DOSF.
DISTRIBUTED OFFICE SUPPORT SYSTEM/370/VSE
RELEASE 2
DISOSS/VSE (5666-264)
The Distributed Office Support System/VSE provides documenthandling functions by means of licensed programs executing' in a
host/ distributed subsystem environment. Distributed Office Support
System/VSE Release 2.0 operates on a host computer, such as the
S,370, the 3031 or the 4331 or larger, under the control of VSE and
under the Customer Information Control System/Virtual Storage
(CICS/DOS/VS). It offers both interactive and deferred communication with the Distributed Office Support System/8100/DOSF Release
1.0 that operates on host-attached 8100 subsystems under the control
of the Distributed Processing Control Executive (DPCX) and Distributed
Office Support Facility (DOS F).
--
------ ----.:. ~ :E~5: ISG
Do not reproduce without written permission
PSS.6
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
SMALL SYSTEM EXECUTIVE/VSE
RELEASE 1 (SSX!VSE)
5666-265
DATA LANGUAGE/I DISK OPERATING SYSTEM/
VIRTUAL STORAGE
DL/I DOS/VS (5746-XX1) - DL/I SSX/VSE (5666-275)
The licensed program Small System Executive/Virtual Storage
Extended (SSX/VSE) is a VSE-based pre-generated operating system
which runs within a range of predefined4321 and 4331 configurations.
SSX/VSE supports batch and interactive applications. It can be used in
stand-alone environments supporting locally- and remotely-attached
terminals and in distributed data processing environments, i.e.,
interconnected to other processors in an SNA network. SSX/VSE is
designed for quick installation and enhanced ease-of-use compared to
DOS/VSE. SSX/VSE will be delivered on one tape and serviced as one
product. The functional capabilities of the VSE components included in
SSX/VSE are restricted to the generation parameters selected and
represent as such a subset of the respective VSE components. The
concept of pregeneration with a fixed set of external functions will
increase the level of system stability. SSX/VSE RPG II, SSX/VSE PL/I
and DL/I SSX/VSE are prompter-supported program product versions
of DOS/VSE program products in an SSX/VSE environment, which
have been tested under and adapted to SSX/VSE. They can be
ordered with unique SSX/VSE related program product numbers,
different from their DOS/VSE versions.
DL/I DOS/VS is a data base management control system developed to
help improve the user's ability to implement data base processing
applications. It provides data organization methods that are useful in the
creation, interrelation and maintenance of large common data bases.
DL/I DOS/VS executes as an application program in a virtual storage
environment under DOS/VS or DOS/VSE.
SMALL SYSTEM EXECUTIVE/VSE
RELEASE 2 (SSX/VSE)
5666-265
The Small System Executive/Virtua.! Storage Extended (SSX/VSE)
program is a pre-generated VSE operating system which runs within a
range of predefined 4321, 4331 and 4341 configurations. SSX/VSE
supports batch and interactive applications. It can be used in standalone environments supporting locally and remotely attached terminals
and in distributed data processing environments, i.e., interconnected to
other processors in an SNA network. SSX/VSE is designed for quick
installation and enhanced ease-of-use compared to DOS/VSE.
SSX/VSE Release 2 will be delivered on one tape and serviced as one
product. SSX/VSE is designed for easy installation and easy operation
in standalone environments or distributed data processing environments.
4700 FINANCE COMMUNICATION SYSTEM
COBOL SUPPORT - DOS/VSE (5666-266)
4700 Finance Communication System COBOL Support - DOS/VSE
executes under DOS/VSE. Output of the compiler is object programs
that will execute on the 4700 controllers. The 4700 COBOL compilers
should provide customers with a powerful, comprehensive, easy-touse language for use in preparation and execution of finance application
programs. The language offers a wide range of features, plus facilities
for handling input/output, and debugging COBOL programs.
DIRECT MULTINETWORK LINK (DMNL) for CICS/DOS/VS
VERSION 1 RELEASE 1
5666-269
Direct Multinetwork Link (DMNL) is an application program that enables
the preparation and processing of messages related to banking
transactions.
VSE/POWER VERSION 2
5666-273
VSE/POWER Version 2 combines batch spooling functions with remote
job entry and full networking capabilities. In addition, VSE/POWER
Version 2 is designed to offer enhancements in the following areas:
Job / output status notification, output handling (conversion aids for
tapes), space management and trace information handling.
DOS/VS RPG II Release 3 (5746-RG1)
SSX/VSE RPG II (5666-274)
DOS/VS RPG II is a programming language that can be used to create
programs to perform a wide variety of commercial data processing jobs.
Release 3 of DOS/VS RPG II is an enhancement of the current
DOS/VS RPG II Release 2 compiler mainly for interactive usage.
DOS/VS RPGII Releases 2 and 3 run under the control of DOS/VSE
with VSE/ Advanced Functions or CMS in VM/370 Release 6 with
VM/BSE program products or VM/SE. RPG II Release 3 also runs
under control of SSX/VSE. A minimum of 64K bytes of virtual storage
is required for the compilation of batch applications and 128K bytes for
the CICS/DOS/VS Command Language Translator. For the batch DL/I
DOS/VS Translator, a minimum of 96K bytes of storage in a virtual
partition is required. An interactive partition of 140K bytes of virtual
storage is required for the RPG II Source Entry Facility under VSE/ICCF
or CMS. The DOS/VS RPG II compiler executes on any configuration
supported by DOS/VSE, SSX/VSE or CMS in VM/370 Release 6 with
VM/BSE or VM/SE program products.
DOS PL/I OPTIMIZING COMPILER & LIBRARIES
DOS (5736-PL3)
SSX/VSE (5666-276)
This package provides one ordering number for the following program
products (on one tape or disk): Compiler (5736- PL1) ... Resident Library
(5736-LM4) ... Transient Library (5736-LM5). Note: The SSX/VSE
version of the DOS/PLI Optimizing Compiler and Libraries is based on
release 5.1 .
DOS PL/I TRANSIENT LIBRARY (5736-LM5)
SSX/VSE TRANSIENT LIBRARY (5666-277)
This Program Product is used in conjunction with the DOS PL/I
Optimizing Compiler (5736-PL1). For the complete compilation and
execution of a PL/I program using this compiler, the following
additional program products are required: DOS PL/ I Resident Library
5736-LM4 (for link-edit) '" DOS PL/I Transient Library 5736-LM5 (for
execution).
DEVELOPMENT MANAGEMENT SYSTEM/
CROSS-SYSTEM PRODUCT
FOR the SSX/VSE ENVIRONMENT
DEFINITION (5666-282) - EXECUTION (5666-283)
The Development Management System/Cross-System Product
(DMS/CSP) provides an interactive interface for developing, testing,
generating and executing application programs in an SSX/VSE
environment. It is fully compatible with the DMS Cross-System
Product for CICS/VS, TSO or VM/CMS. DMS/CSP Definition
includes the facilities for developing, testing and generating DMS/eSp
applications. DMS/CSP Execution provides for production execution of
DMS/CSP applications.
SCREEN DEFINITION FACILITY/
CUSTOMER INFORMATION CONTROL SYSTEM
SMALL SYSTEMS EXECUTIVE/VIRTUAL STORAGE
EXTENDED- RELEASE 1 (5666-288)
Screen Definition Facility/Customer Information Control System Small Systems Executive/Virtual Storage Extended (SDF/SSX) is an
online application development tool for the CICS/VS application
programmer who wants to define or edit maps and map sets for the
CICS/VS Basic Mapping Support (BMS). The online operation and the
ease-of-use-oriented functions of the program enhance productivity in
map and map set development and maintenance.
ENTRY LEVEL INTERACTIVE APPLICATION SYSTEM SMALL SYSTEMS EXECUTIVE/
VIRTUAL STORAGE EXTENDED
ELIAS SSX/VSE (5666-291)
ELIAS SSX/VSE is an .interactive program which runs under the control
of the Interactive Productivity Facility that is included in the Small
System Executive/Virtual Storage Extended (SSX/VSE, 5666-265).
When correctly installed in its Specified Operating Environment (SO E),
ELIAS SSX/VSE is designed to provide a system intended to facilitate
the design, development and implementation of VSAM, DB, DC,
and/or DB/DC programs. These programs may be written in COBOL
or PL/I. Through the facilities of ELIAS SSX/VSE, they may invoke the
functions provided by the elcs and VSAM components of SSX/VSE
and DL/I SSX/VSE in a manner which is simpler than the direct
interface to these program products. This interactive approach can also
reduce the amount of time spent in searching documentation and also
for data entry, thus improving productivity
------- --------=-=-=='
- --;'= ISG
Do not reproduce without written permission
PSS.7
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
QUERY MANAGEMENT FACILITY for VSE
QMF/VSE VERSION 1 RELEASE 1
5666-292
COMMUNICATION ORIENTED MESSAGE SYSTEM
OS/VS {CORMES} REL.1.0
5668-007
QM FlYSE extends query and report writing facilities within the VSE
Advanced Function Release 3 environment. It is designed to complement SQL/ Data System (SQL/ OS) Release 2 by providing interactive
facilities to retrieve and modify, display, or print relational data. It
expands the ease-of-use characteristics and enhances the report
writing capabilities of the interactive SQL (lSQL) function of SQL/DS.
The QMF/VSE user may select his query language between the
structured query language (SQL) and the query-by-example (QBE) style
language.
The Communication Oriented Message System OS/VS (CORMES) is
designed to build the central 'paperless' message exchange system in
an organization connecting terminal users and application programs of
different functions. It provides communication links: For the exchange
of information between terminal users (action messages) '" for the
interaction between application programs and terminal users (action
messages) '"
for triggering the execution of online application
programs based on the occurrence of prespecified events (trigger
messages).
NETWORK PROBLEM DETERMINATION APPLICATION
(NPDA) VERSION 3
DOS/VSE, SSX/VSE {5666-295}
MVS/370, MVS/XA (5668-920)
SYSTEM PRODUCTIVITY FACILITY
SPF (5668-009)
Network Problem Determination Application (NPDA) Version 3 provides
functional and usability enhancements, new device support, and
support for host and 37X5/EP attached resources in an MVS/XA
environment.
VSE SYSTEM IPO/E 1.4.0 VERSION 1.1.0
5750-AAP
VSE/SYSTEM PACKAGE VERSION 1.1.0
VSE/SP 1.1.0 PRODUCTION {5666-296}
VSE/SP 1.1.0 GENERATION (5666-297)
The System Productivity Facility (SPF) is a program product which
assists in program development. SPF is designed to take advantage of
the characteristics of 3270 display terminals and increases productivity
in an interactive environment for users of both structured and conventional programming techniques. The System Productivity Facility
replaces the Structured Programming Facility program products
(5740-XT8, 5748-XT3). The name has been changed to reflect the
expansion of the product capabilities beyond structured programming.
SPF includes significant new functions that simplify the development of
interactive applications. New services are provided to display
predefined screen images, build and maintain permanent tables of user
information and generate output files for job submittal or other
processing.
VSE/System IPO/E 1.4.0 is an important enhancement and extension
of the well-accepted VSE System IPO/E. VSE System IPO/E 1.4.0 is
restructured and enhanced to further reduce time and skill level required
to install and service VSE.
INTERACTIVE INSTRUCTIONAL
AUTHORING SYSTEM
5668-011
DIRECT ACCESS STORAGE DEVICE
MIGRATION AID REL. 1 {5668-002}
The Interactive Instructional Authoring System program provides the
capability to create (author) and maintain computer-based training
courses. These courses will run under Interactive Instructional
Presentation System (5668-012), a companion product which is a
prerequisite.
The Direct Access Storage Device (DASD) Migration Aid program
provides support for the new 3380 and 3375 Direct Access Storage,
new high-speed, large capacity direct access disk storage devices. The
Migration Aid is designed to help reduce the effort required to perform
DASD migration.
The Migration Aid is designed to capture all required data set attributes
from the devices' Volume Tables of Contents (VTOC). Furthermore, by
identifying the amount of space currently allocated and the original
secondary space allocation, internal space calculation routines can help
project the data sets' space requirements on the new device.
DOCUMENT INTERCHANGE FACILITY/CENTRAL
VERSION 1 RELEASE 1 {5668-003}
DOCUMENT INTERCHANGE FACILITY/DISTRIBUTED
VERSION 1 RELEASE 1 {5668-004}
IBM offers a variety of products associated with word and text
processing activities. Among these are: 8100 Information System with
the DOSF/8100 (Distributed Office Support Facility) program product
... 3730 Distributed Office Communication System ... Document Library
Facility ... Document Composition Facility (SCRIPT /VS) ... Advanced
Text Management System-III (ATMS-1I1) ... Storage and Information
Retrieval System (STAIRS/VS) ... Distributed Office Support System.
Individually, these products provide facilities for the creation, storage,
revision and production of a wide variety of documentation items.
Acting as a functional link, the Document Interchange Facility allows an
enterprise to take advantage of these products within the same
installation.
DOWNSTREAM LOAD UTILITY
RELEASE 1 {5668-006}
The Downstream Load Utility program provides the function needed to
load data into the 3644 Automatic Data Unit and/or the 8775 Display
Terminal and/or equivalent devices such as the 7426 Terminal Interface
Unit. The 3644 and the 8775 mdls 1 and 2 can be attached to the 4331
processor via the Loop Adapter feature. The 8775 mdls 11 and 12 can
be attached to the 4331 processor via the Communication Adapter
feature (#1601) or to the 4300 and S/370 processors via the 3704 or
3705 Communications Controller.
INTERACTIVE INSTRUCTIONAL PRESENTATION SYSTEM
5868-012
The Interactive Instructional Presentation System program provides
terminal-based training and instructional capability by utilizing available
Data Base/Data Communication Systems (IMS/VS and CICS/VS),
Interactive Systems (CMS and TSO), and Terminal Access Methods
(VTAM and TCAM). No modification is necessary to the programs of
the host system. Interactive Instructional Presentation System
(5668-012) is a prerequisite for its companion product, Interactive
Instructional Authoring System (5668-011) which is used to create
course material for delivery under Interactive Instructional Presentation
System.
IGES PROCESSOR
RELEASE 1
5668-904
The IGES Processor program will help perform the job of transferring
engineering data between a CADAM* system and another system via
the Initial Graphics Exchange Specification (lGES Standard). Data
transfer is done in a two-step process. First, the user on the sending
system transfers CAD/CAM data to the IGES file. Second, the user on
the receiving system transfers data from the IGES file to the CAD/CAM
data model format. The IGES Processor provides IGES to CADAM and
CADAM to IGES data transfer support.
* CADAM is a registered trademark of CADAM INC.
GRAPHICAL DISPLAY AND QUERY FACILITY
{GDQF} RELEASE 1
5668-905
The Graphical Display and Query Facility (GDQF) program may be used
to view CADAM* models, APT Geometry (PUNCH) files, or Graphic
Data Files (GDF) on a 3270-family Display device. GDQF may also be
used to prepare output for the 3287 and 4250 Printers.
------- - - - -----.:.:::::::';'=
- --- ISG
Do not reproduce without written permission
PSS.8
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
COPICS FACILITIES DATA MANAGEMENT
RELEASE 1 Modification Level 0
5668-907
4700 FINANCE COMMUNICATION SYSTEM
APPLICATION MAP GENERATOR
5668-934
COPICS Facilities Data Management is designed to bring the Resource/
Facility Data Base (containing details of work centers and machines)
and Tool Data Base (containing details of tools and tool kits) directly to
manufacturing engineering and production engineering departinents,
along with all other functions which require access to this information.
Through the use of online video display terminals, the user can create
and maintain work center and machine, and tool and tool kit data as
well as make inquiries against it.
The Application Map Generator for the 4700 Finance Communication
System is a host-based online interactive programming tool for user
presentation services development. This program is designed to
execute on a S/370, 303X, 308X or 4300 with the Interactive Map
Definition feature of the Graphical Data Display Manager. It will operate
on SSX/VSE, DOS/VSE, OS/VS1, OS/VS2 (MVSl, MVS/XA or
VM/SP. Application Map Generator is used in application development
environments to generate service-dependent control commands (maps)
that are used with the Controller Resource Manager licensed program
on the 4700 Finance Communication System, as part of Resource
Manager.
COPICS SHOP ORDER ANALYSIS and REPORTING
RELEASE 1 Modification Level 0
5668-908
The planning and control of the manufacturing process is characterized,
as all complex processes, by a multi-level structure of planning, control,
and execution. Within this overall architecture, manufacturing activity
planning is subdivided into discrete functional areas that span from the
long-term resource requirements planning required to validate the
master production schedule, through the release of manufacturing or
shop orders, to monitoring and controlling the actual work performed
on the factory floor. COPICS Shop Order Load Analysis and Reporting
represents the implementation of one of these levels within a general
manufacturing activity planning system, and is designed to support the
production planner activities associated with release, planning and
control of shop orders. These planning and control activities can be
thought of as a bridge between the planning and execution functions of
the manufacturing process, and include aspects of both environments.
DATA INTERFILE TRANSFER, TESTING and
OPERATIONS UTILITY for VSE and VM
DITTO (5668-917)
Data Interfile Transfer, Testing and Operations Utility for VSE and VM
licensed program (hereinafter referred to as DITTO for VSE and VM or
simply DITTO) is a general-purpose utility program for card, magnetic
tape, disk, and diskette input/output devices for use in both the
VSE/Advanced Functions and VM/CMS environments. It provides the
facility to list, scan, display, copy, alter, and create files or portions of
files. The wide range of user-oriented functions is intended to aid
programmer testing, reduce the need for separate specialized utility
programs, and provided greater operational productivity. DITTO offers
the user an efficient and easy-ta-use tool for testing and file-handling
in both a batch and interactive environment.
INFORMATION/VM-VSE
5668-919
The Information/VM-VSE product is a consolidated collection of IBM
technical data of interest to data processing staffs responsible for
planning, installing, supporting and tuning IBM systems, subsystems
and components appropriate to the VM/370 and VSE environments.
When used in conjunction with Information/System, it provides data
processing personnel with keyword access to a wide range of selected
technical information regarding IBM products.
DIRECT S.W.I.F.T. NETWORK LINK (DSNL)
VERSION 1 RELEASE 1
5668-926
Direct S.W.I.F.T. Network Link enables a member of S.W.I.F.T. (Society
for Worldwide Interbank Financial Telecommunication s.c., Brussels,
Belgium) to send messages via the S.W.I.F.T. network.
FILE TRANSFER PROGRAM
VERSION 2 (FTP-V2)
5668-932
The File Transfer Program Version 2, briefly referred to as File Transfer
Program and abbreviated to FTP-V2 in this document, is a generalpurpose utility program that provides remote file submission from any
VSE- or SSX/VSE-based node to any other VSE- or SSX/VSE-based
node by using SNA protocols. It offers transmission functions for
VSAM and sequential disk or tape files.
4700 FINANCE COMMUNICATION SYSTEM
CONTROLLER RESOURCE MANAGER
5668-935
The Controller Resource Manager for the 4700 Finance Communication
System, a comprehensive controller-based facility, is provided to
reduce the effort and expense required to design, develop and install
advanced application functions. This program is part of the Resource
Manager for the 4700 Finance Communication System support and is
designed to be used in conjunction with the Application Map Generator
for the 4700 Finance Communication System (5668-934) in application
development environments.
IMS APPLICATION DEVELOPMENT FACILITY II
5668-937
The IMS Application Development Facility II (IMSADF II) is an
application generator product which aids the development, maintenance
and modification of applications for IMS/VS data base and data
communication systems. It operates with IMS/VS to reduce the time
and effort required for development and maintenance of data base and
data communication applications. It provides increased capabilities in
the areas of data independence, access control, data integrity, and
routing messages between application systems. Application Development Facility " is an upward compatible enhancement of the IMS
Application Development Facility IUP (5796-PHX). It includes all of the
IUP Release 1.3 function plus new functional and performance
enhancements.
GRAPHICS PROGRAM GENERATOR
VERSION 1
5668-941
The Graphics Program Generator program is a set of programs
designed to create, maintain and display information about facilities,
their locations and relationships to one another. The Graphics Program
Generator supports an interactive dialog on a graphics workstation. In
this dialog, pictures of the facilities are displayed. The operator selects
actions to be performed, and indicates the facility or location involved
by pointing to the displayed picture.
DEVELOPMENT MANAGEMENT SYSTEM/
CROSS-SYSTEM PRODUCT for the
CICS/VS, TSO and VM/CMS ENVIRONMENTS
DEFINITION (5668-944) - EXECUTION (5668-945)
The Development Management System/Cross-System Product
(DMS/CSP) provides an interactive interface for developing, testing,
generating and executing application programs in a CICS/VS, TSO or
VM/CMS environment. It is fully compatible with the OMS CrossSystem Product for SSX/VSE. DMS/CSP Definition includes the
facilities for developing, testing and generating DMS/CSP applications.
DMS/CSP Execution provides for production execution of DMS/CMS
applications.
BATCH TERMINAL SIMULATOR
5668-948
The Batch Terminal Simulator is a productivity aid that allows the
execution of IMS/VS applications in a batch or TSO environment. This
facilitates the testing and debugging of IMS/VS application programs.
SYSTEM MODIFICATION PROGRAM EXTENDED
(SMP/E) for OS/VS2 MVS and OS/VS1
5668-949
System Modification Program Extended (SMP /E), an IBM licensed
program, provides enhanced system enabling and change management
capability, improved product usability, and improved product RAS.
SMP/E is designed to operate with MVS/370, MVS/XA, and VSl
system environments. Some SMP/E usability enhancements are not
available to the VSl user.
---- -- ------ ---
.:..:.:=';'= ISG
Do not reproduce without written permission
PSS.9
Aug 83
PRODUCT SUMMARY - SOFTWARE
DISTRIBUTED OFFICE SUPPORT SYSTEM/370
VERSION 2 RELEASE 1 Modification Level 0
5668-982
DISTRIBUTED OFFICE SUPPORT SYSTEM/8100/DOSF
RELEASE 1 Modification Level 0
5668-955
The Distributed Office Support System (abbreviated to DISOSS in this
document) provides document-handling functions by means of licensed
programs executing in a host/ distributed subsystem environment. The
Distributed Office Support S/370, Version 2, Release 1.0 operates on a
host computer, such as the S/370, the 3031 or the 4331 or larger
Processors, under the control of OS/VS1 or OS/VS2 (MVS) and under
either the Customer Information Control System/Virtual Storage
(CICS/VS) or the Information Management System/Virtual Storage
(lMS/VS). It offers both interactive and deferred communication with
the Distributed Office Support System/8100/DOSF Release 1.0 that
operates on host-attached 8100 subsystems under the control of the
Distributed Processing Control Executive (DPCX) and Distributed Office
Support Facility (DOS F).
New
------
Do not reproduce without written permission
= :-:. :§~5: ISG
PS S.10
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
INTERACTIVE DISPLAY TEXT FACILITY
IDTF (5668-956)
NETWORK ROUTING FACILITY
5668-963
Interactive Display Text Facility (lDTF) program provides text entry and
edit functions for an 8775 Display Terminal attached to an 8100
Information System. IDTF is licensed to an 8100 processor and is
downstream-loaded into any appropriately configured 8775 attached to
that processor for execution. IDTF provides users with text functions
similar to those provided by the 3732 Text Display Station, while giving
users access to the existing data functions of the 8775. Thus an 8775
with IDTF downstream-loaded provides a single workstation that meets
the requirements of users who need a terminal for text entry as well as
an 8775 Terminal for data applications. IDTF extends the use of the
Distributed Office System into applications where only a single terminal
can be justified, and provides text processing facilities for users
accustomed to 8775 characteristics.
The Network Routing Facility program is designed to provide users of
Advanced Communication
Function/Network Control
Program
(ACF /NCP /VS) with a 3705-based message routing facility. The
Network Routing Facility resides in a 3705 Communication Controller
with ACF /NCP /VS and routes messages between assorted devices
without the use of host processor resources.
DIGITAL INTERACTIVE GRAPHICS for
INTERACTIVE MAPPING
5668-959
Digital Interactive Graphics for Interpretative Mapping is a graphic
application program which provides an interactive capability to retrieve,
display, manipulate and store map data in digital form. Capability is
provided to extract specific data elements relating to the facilities
shown on a map and to analyze these elements using various mathematical surface techniques and evaluation routines. Results can be
displayed on a vector storage tube in the form of grids, contours or
cross-sections in conjunction with the original map display. Mathematical results can be edited and modified by the user before inputting
them to other techniques for further analysis. Final results can be
user-modified to produce a map document which is a combination of
mathematical and intuitive inputs. The system can then display a 'most
probable' representation of the area of investigation. Any of the
calculated and modified results can be stored on disk files for future
analysis.
INTERACTIVE SYSTEM PRODUCTIVITY FACILITY
MVS, TSO - VM, CMS (5668-960)
The Interactive System Productivity Facility (lSPF) is a dialog manager
for interactive applications. It provides control and services to support
processing of interactive applications (dialogs) in different host
environments. ISPF and the applicable ISPF/Program Development
Facility (Program Numbers 5665-268 for MVS and 5664-172 for VM)
are related IBM program products. Together, they are designed to
increase productivity in the development of applications by taking
advantage of the features of display terminals. They contain special
functions for the development and use of interactive applications
(dialogs). The dialog management functions of ISPF and the program
development functions of the ISPF/Programming Development Facility
(lSPF/PDF) products were previously combined in the predecessor
program product the Systems Productivity Facility (5668-009) for
MVS/TSO and VM/CMS. Significant function and usability enhancements have been included in the dialog management facilities of ISPF.
With this announcement of ISPF for TSO and CMS, IBM's direction is
to extend this common dialog manager capability to the VSE/ICCF
environment. Further information on the VSE/ICCF version of this
product will be available later.
INTERACTIVE SYSTEM PRODUCTIVITY FACILITY
VSE/ICCF (5668-960)
The Interactive System Productivity Facility (lSPF) dialog manager for
interactive applications is now available for Virtual System
Extensions/Interactive Communication Control Facility (VSE/ICCF).
This greatly enhances the capabilities of DOS/VSE, and provides
complete 'cross-system' capability for the dialog manager function of
ISPF. It provides control and services to support processing of
interactive applications (dialogs) in different host environments. ISPF
and the applicable ISPF/Program Development Facility are related IBM
program products. Together, they are designed to increase productivity
in the development of applications by taking advantage of the features
of display terminals. They contain special functions for the development and use of interactive applications (dialogs). With this support of
ICCF for VSE, IBM has extended this common dialog manager to the
ICCF environment.
ASSEMBLER H
VERSION 2 RELEASE 1.0
5668-962
Assembler H Version 2, Release 1.0 is a functional replacement for and
incorporates the functions available in OS Assembler H Release 5.0,
5734-AS1. Version 2 supports the new operation codes available with
the Extended Architecture mode processor, VM /XA Migration Aid
(VM/XA M.A.) and Bi-modal addressing of the MVS/Extended
Architecture environment. Assembler H Version 2. Release 1.0 is now
supported for use in the CMS environment of VM/System Product and
VM/XA Migration Aid.
DIRECT MULTINETWORK LINK (DMNL) for IMS/VS
VERSION 1 RELEASE 1
5668-964
Direct Multinetwork Link (DMNL) is an application program that enables
the preparation and processing of messages related to banking
transactions.
DIRECT MULTINETWORK LINK (DMNL) for CICS/OS/VS
VERSION 1 RELEASE 1
5668-965
Direct Multinetwork Link (DMNL) is an application program that enables
the preparation and processing of messages related to banking
transactions.
SERVICE LEVEL REPORTER (SLR)
VERSION 2 RELEASE 1.0
5668-966
Service Level Reporter Version 2 (SLR) program is designed to help DP
management with information to help manage the DP installation.
INTERACTIVE FINANCIAL SYSTEM 1 - OS/VS
POSTINGS AND GENERAL LEDGER
RELEASE 2 (5668-967)
The Interactive Financial System 1 (lFS 1) is part of the Interactive
Financial System (IFS).
The Interactive Financial System is a set of application programs
designed to perform accounting and related functions. The set consists
of the programs IFS 1, IFS 2, IFS 3 and IFS 4. IFS 1 allows for posting
either in interactive mode using 3277, 3278 or 3279 Display Stations or
in batch mode. Any account and any voucher can be displayed and" if
necessary, processed randomly at the terminal. Accounts can be
processed in a foreign currency. IFS 1 (OS/VS) Release 2.0 is
functionally compatible with IFS 1 (DOS/VS). 5746-F52, Release 2.0.
INTERACTIVE FINANCIAL SYSTEM 2 - OS/VS
PROFIT & LOSS, BALANCE SHEET
RELEASE 2 (5668-968)
The Interactive Financial System 2 (IFS 2) is part of the Interactive
Financial System (lFS). The Interactive Financial System is a set of
application programs designed to perform accounting and related
functions. The set consists of the programs IFS 1. IFS 2, IFS 3 and IFS
4. IFS 1 Release 2 Modification Level 0 is a prerequisite to IFS 2. With
IFS 2, the user can define the profit and loss statement balance sheet
and financial status report to his individual requirements. IFS 2
(OS/VS) Release 2.0 is functionally compatible with the program
product IFS 2 (DOS/VS). 5746-F53, Release 2.0.
INTERACTIVE FINANCIAL SYSTEM 3 - OS/VS
OPEN ITEM ACCOUNTING
RELEASE 2 (5668-969)
The Interactive Financial System 3 (lFS 3) is part of the Interactive
Financial System (lFS). The Interactive Financial System is a set of
application programs designed to perform accounting and related
functions. The set consists of the programs I FS 1, I FS 2, I FS 3 and I FS
4. IFS 1 Release 2 Modification Level 0 is a prerequisite to IFS 3. IFS 3
extends the account management functions provided by IFS 1 by the
open item accounting procedure for debtor, creditor and impersonal
accounts. IFS 3 (OS/VS) Release 2.0 is functionally compatible with the
program IFS 3 (DOS/VS). 5746-F54, Release 2.0.
----------- ---- ---
Do not reproduce without written permission
.:.::..: == ';' == ISG
PRODUCT SUMMARY - SOFTWARE
INTERACTIVE FINANCIAL SYSTEM 4 (OS/VS)
PAYMENT PROCESSING
RELEASE 2 (5668-970)
The Interactive Financial System 4 (lFS 4) is part of the Interactive
Financial System (lFS). The Interactive Financial System is a set of
application programs designed to perform accounting and related
functions. The set consists of the programs IFS 1, IFS 2, IFS 3 and IFS
4. IFS 1 Release 2 Modification Level 0 and IFS 3 Release 2 Modification Level 0 are prerequisites to IFS 4. IFS 4 is designed to determine
the maturity of open items by user-specified criteria, such as settlement
periods and payment strategy, and to prepare and print a payment
proposal list of the selected items. The user can change and release the
payment proposal at the display terminal. When the user has released
the payment proposal, IFS 4 can automatically post the related
payments and print the payment orders. IFS4 (OS/VS) Release 2.0 is
functionally compatible with the program IFS4 (DOS/VS, 5746-F55)
Release 2.0.
NETWORK LOGICAL DATA MANAGER (NLDM)
for OS/VS2 MVS (5668-971)
NLDM, a Network Communications Control Facility (NCCF) application
program, collects SNA session-related information for use by an
individual with SNA programming skills in identifying and isolating
software or logical problems.
QUERY MANAGEMENT FACILITY (QMF) RELEASE 1
5668-972
Query Management Facility (QMF) program is designed to provide
interactive data base facilities to users with little or no data processing
background. It can also be highly useful to the data processing
professional as a high productivity programming tool for use in
application development and prototyping. Query Management Facility
operates against IBM Database 2 (DB2) data in the MVS/XA and
MVS/370 environments. Query Management Facility also operates
against SQL/DS R2 data in the VM/SP environment. Query Management Facility also utilizes companion IBM program products: Interactive
System Productivity Facility (lSPF) Dialog Manager and Graphical Data
Display Manager (GDDM).
DATA EXTRACT (DXT) RELEASE 1
5668-973
Data Extract (DXT) program extracts data from files residing in
Information Management System/Virtual Storage Version 1 data bases,
virtual storage access method (VSAM) or sequential access method
(SAM) data sets. DXT is designed for use in obtaining periodic
'snapshots' of subsets of existing data for use in end-user query and
report writing. Data is extracted into a form suitable for loading using
the IBM Database 2 (DB2) or SQL/Data System (SQL/DS) Release 2
load utilities. Extracted data can be sent to another processor by means
of JES2 or JES3 networking. This data may then be loaded into DB2
tables or SQL/DS R2 tables. DXT operates in both MVS/XA and
MVS/370 environments.
GRAPHICS ACCESS METHOD/SYSTEM PRODUCT
GAM/SP (5668-978)
The Graphics Access Method/System Product (GAM/SP) provides
basic programming support for the 3250 Graphics Display System and
2250 Display Unit mdl 3, and for application programs designed for
those graphics systems and devices. GAM/SP extends to users of the
CMS component of VM/System Product graphics support that
previously has been available only under MVS and VS1 operating
systems.
COMMUNICATIONS FACILITY/HOST
5668-979
The Communications Facility/Host program extends the message and
transaction routing function of the Series/1 EDX Communications
Facility licensed program (5719-CF1) to include a 4300, S/370 or 30XX
Host Processor. Communications Facility / Host is designed to operate
with a small local network of interconnected Series/1s, The user
interfaces and protocols of Communications Facility/Host are designed
to be consistent with those of the Series/1 Communications Facility
licensed program; therefore, they will be most useful in those customer
environments where the host is operated by personnel familiar with the
EDX Series/1 Communications Facility licensed program. However, the
function may also be useful in additional Host - EDX Series/1
environments where consistency with IBM-provided support for other
distributed processors is not critical. Communications Facility/Host is
designed to provide for interactive routing of messages and transactions between the Host processor and Series/1s via SDLC and BSC
communications lines. It runs as an application program under
CICS/VS. Communications Facility /Host can provide a foundation for
the implementation of applications which require communications
between a Host and Series/1 s.
PS S.11
Aug 83
New
X.25 NCP PACKET SWITCHING INTERFACE
5668-981
The X.25 NCP Packet Switching Interface program provides users of
IBM's ACF/NCP program with the capability to attach 3705-11,
3705-80, or 3725 Communication Controllers to data transmission
services supporting interfaces complying with CCITT Recommendation
X.25 (Geneva, 1980). The X.25 NCP Packet Switching Interface is
designed to operate with ACF /NCP Version 1 Release 2.1 or 3.0 and
ACF/NCP Version 2 for the 3705 and 3725.
NETWORK PROBLEM DETERMINATION APPLICATION
NPDA VERSION 2 (5668-983) MVS, VS1, VSE
The Network Problem Determination Application Version 2 (NPDA
Version 2) program assists users in performing problem determination.
NPDA generates situation alerts to the appropriate personnel about
potential problems. N PDA also collects and interprets records of
detected events and statistical data originating in those hardware and
software components that provide such information and recommends
possible user activities to locate and relieve problems. NPDA Version 2
expands the function of the Network Problem Determination application
(NPDA) program product (5735-XX8). NPDA Version 2, which runs as
an application of the Network Communications Control Facility (NCCF),
expands the alert support for resources of the 3600 and the 4700
Finance Communication Systems. NPDA Version 2 also expands the
function of NPDA for OS/VS users by extending device error support to
selected tape, DASD and 3800 printer devices attached to a network
host processor and to the CPU (OS/VS2 MVS only) and channels of
the network host processor, in addition to the previously supported
communications network resources. The 3600 Threshold Analysis and
Remote Access feature of NPDA is separately orderable for NPDA
Version 2.
HOST COMMAND FACILITY
VERSION 2 (5668-985)
Host Command Facility - Version 2 (HCF V2) extends the capabilities of
the first version in ACF /VTAM environments by allowing operation with
the Terminal Access Facility feature of the Network Communications
Control Facility Release 2 (NCCF R2) licensed program, This cl1pilbility,
when used in a VTAM environment. will allow tho contral l1otwork
operator to establish multiple concurrent SOSSIOllS with 8100 Distributed
Systems from a single NCCF R2 terminal at tho cOl1tral-site S!370 or
4300. When communicating with 8100!DPPX or DPPX!SP systems,
these sessions can be full-screen sessions or lil1o-by-line sessions.
Full-screen sessions require that the control torminal be dedicated to
one session at a time. Line-by-line sessions provide for an interleaved
display of messages from multiple 8100 systems, thereby allowing
operational monitoring of multiple 8100 systems from a single terminal.
Sessions with 8100!DPCX systems are limited to full-screen sessions.
In addition to the operation with the Terminal Access Facility feature of
NCCF R2, HCF V2, when used in DPPX or DPPX/SP environments,
also allows use of the 3767 Communication Terminal for HCF functions.
DISTRIBUTED SYSTEMS EXECUTIVE (DSX)
VERSION 2 RELEASE 1
5668-986
Distributed Systems Executive Version 2 Release 1.0 (DSX 2.1.0) is a
network management tool designed to assist the user in achieving the
controlled distribution of data and software in 8100 and 3790 networks.
DSX 2.1.0 includes: The host libraries, holding files and control files '"
the transmission, formatting and reporting functions ... the flexible
operator control capabilities that are needed for effective network
management. This program is applicable to the 8100 and 3790
configuration #9431, #9165 or #9169 which have the ability to
communicate with the host via SNA sessions. DSX 2.1.0 consists of
three major parts: Central library support '" automatic transmission
control ... interactive operator control.
DISTRIBUTED SYSTEMS EXECUTIVE (DSX)
VERSION 2 RELEASE 2
5668-986
Distributed Systems Executive Version 2 Release 2 (DSX-V2.2) is a
S/370-based network management tool designed to give a central site
user administrative and management control over the distribution of
software and data across his distributed 8100, 3790, Series!1 network.
DSX-V2.2 consists of three major parts: Central repository support ...
automatic transmission control ... operator control.
- -..-.- ----
----
.=.:=:: :5~~ ISG
Do not reproduce without written permission
PS S.12
PRODUCT SUMMARY - SOFTWARE
4700 FINANCE COMMUNICATION SYSTEM
COBOL SUPPORT OS/VS (5668-987)
The 4700 Finance Communication System COBOL Support OS/VS,
Program Number 5668-987, executes under OS/VS1 or OS/VS2
(MVS). Output of the compiler is object programs that will execute on
the 4700 controllers. The 4700 COBOL compilers should provide
customers with a powerful, comprehensive, easy-to-use language for
use in preparation and execution of finance application programs. The
language offers a wide range of features, plus facilities for handling
input/output, and debugging COBOL programs.
4700 FINANCE COMMUNICATION SYSTEM
HOST SUPPORT (DOS/VSE, OS/VS1 and MVS)
5668-989
The 4700 Finance Communication System Host Support will provide
support for the following new and improved functions, over existing
3600 support: CPGEN enhancements for 4700 support ... Increased
application program maximum size ... 4700 host transmission facility
(enhanced
diskette
update
capability,
unattended
diskette
create/update capability, host transmission facility log file available,
integrated SDLC and BSC3 image transmission facility) ... Host Diskette
Image Create Facility (HDIC) Support ... Application Program/Diskette
Dump Enhancements.
Aug 83
New
SYSTEM/3 APPAREL BUSINESS CONTROL (ABC)
SYSTEM
5701-012
The System/3 Apparel Business Control (ABC) System provides the
apparel industry with a low cost. easily installed order processing
system designed to complement the capabilities of the System/3.
SYSTEM/3 OPTIMUM BLENDING
5701-051
System/3 Optimum Blending is a small linear programming system
specifically designed for blending applications in the agriculture and
food processing industries.
SYSTEM/3 LAW ENFORCEMENT SYSTEM
5701-G21
The System/3 Law Enforcement System provides local government
police departments with management, statistical. and investigative
information. A complete set of Card RPG " and System/3 Card Utility
routines has been incorporated within six subsystems, each of which is
significant to the law enforcement environment. The six subsystems
are: Offense Reporting ... Arrest Reporting ... Accident Reporting ...
Radio Dispatch Analysis ... Field Interview Reporting ... Police Personnel
Reporting.
IBM BASIC PROCESSOR and LIBRARY RELEASE 1
5668-996
IBM BASIC LIBRARY RELEASE 1
5668-995
Together, these subsystems can provide the local government police
department with an extensive data processing capability for law
enforcement purposes.
IBM BASIC Release 1 is a Processor and Library which provides a
problem solving capability in the VM/CMS interactive environment.
The BASIC Language is easy to learn and easy to use. Its simplicity has
broad appeal to non-computer professionals (business analysts,
engineers, scientists, students etc.) as well as to the professional
programmer. The language is widely used as a problem solving tool
across a broad range of business and scientific oriented applications.
IBM BASIC operates only in the VM/SP Release 1 environment of
VM/370.
SYSTEM/3 APPROPRIATION ACCOUNTING SYSTEM
5701-G22
IBM BASIC RELEASE 1 under VM/SP-CMS
5668-996
IBM BASIC provides a problem solving capability under VM/SP-CMS
in both the interactive and batch environment. The BASIC language is
easy to learn and easy to use. Its simplicity has broad appeal to
non-computer professionals (business analysts, engineers, scientists,
students, etc.), as well as to the professional programmer. The
language is widely used as a problem solving tool across a broad range
of business and scientific-oriented applications.
.
COMPOSED DOCUMENT PRINTING FACILITY (CDPF)
5668-997
Composed Document Printing Facility (CDPF) program provides support
for the 4250 Printer to produce high-quality master pages. CDPF
processes the output from text programs such as Document Composition Facility Release 3 and graphics programs using Graphical Data
Display Manager Release 3, and produces a format appropriate for
printing on the 4250 Printer.
CDPF operates under MVS/SP, MVS/XA, VM/SP CMS or DOS/VSE.
PARAMETER TABLE GENERATION FACILITY
For the 3644 AUTOMATIC DATA UNIT
GEN3644 (5668-998)
The Parameter Table Generation Facility (GEN3644) provides a means
for customizing the 3644 Automatic Data Unit. This customization
consists of selecting 3644 functions and specifying the initial values of
stored data items. GEN3644 translates the customization data
(developed on worksheets) into the format necessary for transmission
to the 3644. Translation is performed by editing the source data
created by the user and converting it into a parameter table format for
loading into the 3644. The resulting parameter table works with the
3644 microcode provided by IBM.
SYSTEM/3 UNIT INVENTORY TECHNIQUES
5701-011
This System /3 program provides the retailer with meaningful reports on
merchandising activity and inventory status to effect a more efficient
and profitable operation. The system keeps management informed on
the performance of all classes of merchandise and is designed to report
exceptional performance of individual styles to the buyers.
This System/3 program is an appropriation, revenue, and general
ledger accounting system for public institutions.
SYSTEM/3 CITATION PROCESSING SYSTEM
5701-G23
The System/3 Citation Processing System is designed to handle the
moving and parking citation accounting and control requirements of
local governments. Reports and follow-up processing pertinent to this
application are provided. This extremely flexible system recognizes that
individual customer requirements vary from jurisdiction to jurisdiction.
SYSTEM/3 UTILITY BILLING SYSTEM
5701-G24
The System/3 Utility Billing System is designed to handle the utility
billing requirements of local governments and small utility companies.
All reports and billing requirements that are associated with this
application are processed on the basis of either flat rates and/or meter
readings. This extremely flexible system recognizes that individual user
requirements vary from jurisdiction to jurisdiction.
SYSTEM/3 ORDER POINT TECHNIQUE for
INVENTORY MANAGEMENT
5701-M41
This System/3 program consists of a group of programs divided into
inventory analysis, stock status transaction processing, and order
action. It is especially designed for implementing order point inventory
in manufacturing organizations.
SYSTEM/3 CARD BILL-OF-MATERIAL and
REQUIREMENTS PLANNING
5701-M42
This System/3 program is designed to help manufacturing customers
install their requirements planning applications.
SYSTEM/3 CARD RPG II MODEL 10
5701-RG1
The System/3 mdl 10 program generator system is RPG 1/, a programming language and a processor program that is used to produce
machine language object programs. These object programs are then
used in performing a wide range of commercial data processing jobs.
-- -----
PS S.13
Do not reproduce without written permission
- ---
= - -:§~~ ISG
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
SYSTEM/3 CARD RPG II TELECOMMUNICATIONS
FEATURE #6000 (5701-RG1)
SYSTEM/3 BILL-OF-MATERIAL PROCESSOR
5702-M41
The Card RPG II Telecommunications feature (#6000) provides the user
with the capability of sending or receiving binary synchronous data over
voice grade or high-speed communications lines. This support is
achieved through the use of a new RPG II Telecommunications
Specification Sheet, and the addition of BSCA (Binary Synchronous
Communications Adapter) as a device entry on the RPG II File
Description Specification.
This System/3 program is designed to establish, maintain and retrieve
information from four basic manufacturing files, The program will load
and maintain item master, product structure, work center master and
standard routing records on disk files ... reorganize the four files ...
perform six basic retrievals (single level, indented and summarized parts
lists, and single level, indented and summarized where-used parts lists)
... perform two standard routing retrievals (manufacturing routings and
work center where-used).
CARD RPG II BRAILLE
FEATURE #6003 (5701-RG1)
The System/3 RPG II Card Compiler Braille feature (#6003) provides
the user with the capability of having compilation listings and object
program printouts in Braille. The user of a Card RPG II Compiler
(5701- RG 1) equipped with the Braille feature has the option at compile
time to select either Braille or printed listings. An object program
compiled with the Card RPG II compiler having the Braille feature and
specifying Braille output has the option at execution time, to select
either Braille or printed output. The period in the user's printer print
arrangement is used to form the Braille characters. A piece of elastic
must be stretched in front of the type in order to make the proper
impression. Description of the procedure to follow in installing the
elastic is contained in the documentation The Braille Feature for IBM
System/3 Card RPG II Compiler distributed by PID with the feature.
SYSTEM/3 CARD RPG II MAGNETIC TAPE
FEATURE #6004 (5701-RG1)
SYSTEM/3 SHOP LOADING AND CONTROL
5702-M51
This System/3 program consists of source programs and supporting
documentation for use in the installation of an. effective system which
determines labor and machine requirements by work center, releases
orders, creates and maintains open order files, produces status reports,
and creates a work list. This program interfaces with System/3
Inventory and Requirements Planning, 5702-M52. It accepts planned
orders generated by 5702-M52 and creates open orders which are
used by 5702-M52.
SYSTEM/3 INVENTORY AND REQUIREMENTS PLANNING
5702-M52
This program is divided into four phases, inventory planning, projection,
requirements planning, and execution. It is specifically designed to
implement an inventory management and material planning system for
manufacturing organizations.
The System/3 Card RPG II Magnetic Tape feature (#6004) provides the
user with RPG II support to process data files on magnetic tape.
CARD-ORIENTED SYSTEM/3 MODEL 10
5701-SC1
These System/3 programs perform the system control functions for the
installation. They are supplied by IBM with the system at no additional
charge, in two configurations of the System/3 mdl 10; card and
disk-oriented stored programs.
SYSTEM/3 CARD-RESIDENT
MAGNETIC TAPE SORT PROGRAM
5701-SM1
The System/3 Card Resident Magnetic Tape Sort Program supports:
Three or four tape units, fixed-length, blocked or unblocked records,
record size from 18 to 9,999 bytes, maximum block size 9,999 bytes,
labeled or unlabeled tapes, 9-track, 800 or 1600 bpi, multivolume input
or output (work files are single volume only), ASCII or EBCDIC mode of
data or labels (in one run, the mode cannot be mixed), and read
backward.
CARD SYSTEM UTILITIES
5701-UT1
The Card System Utilities consist of six programs: System/3
Reproduce/Interpret Program ... System/3 96-Column List Program ...
System/3 5424 MFCU Sort/Collate Program ... System/3 Data
Recording Program '" System/3 Data Verifying Program ... System/3
80-96 Conversion Program.
SYSTEM/3 BASIC ASSEMBLER
5702-AS1
The System/3 Basic Assembler language is a symbolic programming
language used to write programs for the System/3 mdl 10. Source
programs written in this language are processed by the Basic Assembler Program to produce executable object programs. (This program is
applicable to the System/3 mdl 8).
SYSTEM/3 SUBSET ANS COBOL
COMPILER and LIBRARY
5702-CB1
The System /3 compiler, its library and object programs execute under
control of the System/3 mdl 10 Disk System Control Program
(5702-SC1, Version 6 or later). It provides the user with the most
widely accepted and used standard high-level procedural language in
existence.
SYSTEM/3 DISK FORTRAN IV
5702-F01
System/3 Disk FORTRAN IV processes programs written in the
System/3 FORTRAN language, producing output suitable for execution
with the System/3 Disk System Control Programming (5702-SC1).
SYSTEM/3 HEALTH, WELFARE and PENSION SYSTEM
5702-N11
The System/3 Health, Welfare and Pension Fund System meets basic
contribution accounting requirements for jointly administered health,
welfare and pension funds. In addition, member, contribution, and
claims information is maintained for improved management analysis
and control. The Health, Welfare and Pension Fund System program
product provides a comprehensive, easily installed package which
assumes minimum tailoring and no permanent user programming
capability.
SYSTEM/3 DISK RPG II
5702-RG1
The System/3 Disk RPG II program operates under control of the
System Control Programming. It is disk resident on the 5444 Disk
Storage Drive, and in addition to the functions provided by the Card
RPG II, the Disk RPG II facilitates reading and writing disk records and
updating existing disk files using card and disk input/output. A
directly-attached 3741 Data Station is supported for input or output at
compile or execution time. Disk RPG II can be used on System/3 mdl
8.
DISK ORIENTED SYSTEM/3 MODEL 10/MODEL 8
5702-SC1
System/3 Disk System Management Programs: The disk system
management programs are designed to generate and maintain a disk
resident system which facilitates the compilation, generation, and
execution of programs. The disk resident system must reside on a
5444 Disk Storage Drive.
SYSTEM/3 DISK SORT PROGRAM
5702-SM1
The System/3 mdl 10 Disk Sort Program will sort any disk file
organization supported by System /3 in ascending or descending
sequence. This includes Indexed, Direct, and Sequential files.
SYSTEM/3 DISK RESIDENT MAGNETIC TAPE SORT
5702-SM2
The System/3 Disk Resident Magnetic Tape Sort program sorts
fixed-length, blocked and unblocked files residing on Magnetic Tape.
The sort requires a system with a minimum of 12K bytes of core and
three magnetic tape drives. Up to four magnetic tape drives may be
utilized by the sort program. The file may be recorded in either EBCDIC
or ASCII code, and may reside on mUltiple tape reels. (This feature is
applicable to System/3 mdI8.)
- -----
PS S.14
Do not reproduce without written permission
= =-:. ~~~ ISG
Aug 83
PRODUCT SUMMARY - SOFTWARE
New
SYSTEM/3 DISK RESIDENT CARD UTILITIES
5702-UT1
SYSTEM/3 MODEL 6 DISK SORT PROGRAM
5703-SM1
The following System/3 Card System Utilities may be ordered as disk
resident on a 5444 Disk Storage Drive. Their function is the same as
their card system equivalents: MFCU Sort/Collate ... 96-Column List ...
Reproduce/Interpret '" Data Recording ... Data Verifying ... 80-96
Conversion Program. (This feature not applicable to System/3 mdl 8.)
This System/3 mdl 6 disk sort program sorts any disk file organization
supported by System/3 disk systems management in ascending or
descending sequence. This includes Indexed, Direct, and Sequential
files. The sort program can select desired records from the input file to
be included or excluded from the sort. Recognition of individual records
can be based on: Record code .,. Relation of a field to a constant ...
Relation of two fields in a record ... Any relationship in a series (ORing)
... All relationships in a series (ANDing) ... Multiples of the above tests
in any combinations.
SYSTEM/3 UTILITY PROGRAM FOR
1255 MAGNETIC CHARACTER READER
5702-UT2
This System/3 utility program provides the disk-oriented System/3
mdl 10 user control of document processing on the 1255 Magnetic
Character Reader. It provides a means of reading MICR-encoded
documents from the 1255, accumulating document totals and amount
field totals for each pocket, and placing the data from the documents
on output disk and printer files. The program is designed to fulfill the
basic requirements of the 'ON-US' data capture run required for all
Demand Deposit Application programming. (This program is applicable
to the System/3 mdl 8.)
JOB ANALYSIS SYSTEM/3 (JAS/3)
5702-XP1
Job Analysis System/3 (JAS/3) provides a powerful tool to aid
management in fulfilling its responsibilities in the planning, supervising,
and controlling of project-oriented work by the critical path method. It
is designed to be a high performance system with features which make
it easily usable by non-technical personnel. JAS/3 operates under the
System/3 Disk System Control Programs 5702-SCl or 5703':"SC1,
5704-SCl, 5704-SC2, or 5705-SC1. Depending on core availability,
JAS/3 has a processing capacity of from 180 to 736 activities or work
items and relationships per subnet depending on core size.
SYSTEM/3 DATA/3
5702-XX1, 5704-XX1, 5704-XX3, and 5705-XX1
This program product provides users of System/3 mdls 8, 10 Disk, 12
and 15 with a terminal-oriented data entry, inquiry, and file maintenance system. The specific functions it provides are data entry, data
entry with master file input, inquiry, and inquiry with update.
SYSTEM/3 DISK FORTRAN IV
5703-F01
System/3 Disk FORTRAN IV processes programs written in the
System/3 FORTRAN language, producing output suitable for execution
with the System/3 mdl 6 System Control Programming (5703-SC1).
(This program is not used with the mdl 4).
SYSTEM/3 HEALTH, WELFARE AND PENSION FUND
SYSTEM (5703-N11)
The System/3 Health, Welfare and Pension Fund System meets basic
contribution accounting requirements for jointly administered Health,
Welfare and Pension Funds. In addition, member, contribution, and
claims information is maintained for improved management analysis
and control. The program is designed for the System/3 mdl 6. The
compact System/3 mdl 6 offers for the first time all the benefits of a
stored program system to a large number of smaller funds, while
avoiding significant facility problems. The Health, Welfare and Pension
Fund System program product provides a comprehensive, easily
installed package which assumes minimum tailoring and no permanent
user programming capability.
SYSTEM/3 MODEL 6 RPG II
5703-RG1
System/3 mdl 6 RPG II program operates under control of the System
Control Programming. It is disk resident, and in addition to the
functions provided by the System/3 Disk RPG II (5702-RG1), the
System/3 mdl 6 RPG II supports operator keyboard console and other
unique devices, as indicated below.
SYSTEM/3 MODEL 4 and MODEL 6 BASE SCP
5703-SC1
These programs perform the system control functions that are basic to
a commercially-oriented System/3 mdl 6 installation, or to an
System/3 mdl 4 installation. They are designed to run on either a
model 4 or a model 6, except as noted in the program descriptions.
CCP/DISK SORT PROGRAM (Model 4 Only)
5703-SM2
This program is functionally compatible with the System/3 mdl 6 Disk
Sort program (5703-SM1). With the CCP/Disk Sort program,
however, the user can generate an object module which can be
executed as a task under control of the Communications Control
program (CCP) (5703-SCl feature #6033), or as a program in batch
(non-CCP) mode. This program requires 12K bytes of main storage
(exclusive of control program requirements) for both generation and
execution, and automatic allocation of sort work files is not supported.
SYSTEM/3 MODEL 6 CONVERSATIONAL UTILITY
PROGRAMS (5703-UT1)
There are three System/3 Conversational Utility programs that are disk
resident and operate under control of the SCP: The Keyboard Data
Entry program ... The Keyboard Source Entry program ... The Data
Interchange Utility.
SYSTEM/3 UTILITY PROGRAM FOR
1255 MAGNETIC CHARACTER READER
5703-UT2
This utility program allows the System/3 mdl 6 user to control
document processing on the 1255 Magnetic Character Reader. It
provides a means of reading MICR-encoded documents from the 1255,
accumulating document totals and amount field totals for each stacker,
and placing the data from the documents on output disk and printer
files. The program is designed to fulfill the basic requirements of the
'ON-US' data capture run required for all Demand Deposit Application
programming.
STAT/BASIC FOR SYSTEM/3 MODEL 6
5703-XA1
STAT /BASIC is an interactive program encompassing the most
commonly used statistical techniques for the analysis of numerical data.
The program operates on a System/3 mdl6. STAT/BASIC is designed
to meet the needs of the statistician, engineer, researcher or business
analyst. It helps in using the computer directly for statistical analyses.
A statistically-oriented user should have no difficulty in quickly learning
the capabilities of the program .. The interactive mode of the package
allows a non-data processing-oriented user to use the program with
ease, with a minimum of training. Direct use on the System/3 mdl 6
provides the user with fast results. Because of the interactive nature of
STAT /BASIC, the user can sit at the keyboard and see the results of his
analyses as they are developed. Delays and some of the sources of
error familiar in batch processing are eliminated with STAT/BASIC.
SYSTEM/3 BASIC
5703-XM1
System/3 BASIC is a stand-alone, total facility interactive programming system. BASIC enables the user to enter BASIC statements,
commands, utilities, BASIC data, and Desk Calculator (DCAlC)
instructions all in a completely interactive environment.
MATH/BASIC for SYSTEM/3 MODEL 6
5703-XM2
System/3 MATH/BASIC is a set of conversational routines for the
solution of the most frequently encountered mathematical problems in
science and industry. The library operates on a System /3 mdl 6.
MATH/BASIC is designed to meet the needs of the engineer and
scientist. The conversational features of MATH / BASIC allow a
non-data processing-oriented user to use the programs with a
minimum of training.
-
-~- ------
Do not reproduce without written permission
= =:: :§~§: ISG
PRODUCT SUMMARY - SOFTWARE
PS S.15
Aug 83
New
BUSINESS ANALYSIS/BASIC FOR
SYSTEM/3 MODEL 6
5703-XM3
SYSTEM/3 MODEL 15
DISK RESIDENT CARD UTILITIES
5704-UT1; 5704-UT3
Business Analysis/BASIC is a comprehensive set of interactive routines
for use on the System/3 mdl 6. It consists of 30 routines written in the
BASIC language, providing the problem-solver professional with
procedures for data generation and maintenance, spread sheet analysis,
investment analysis, break-even or cost-volume-profit analysis,
depreciation analysis, and time series analysis. The program is
designed so that a detailed knowledge of programming is not required.
This System/3 program is resident on a 5444 Disk Storage Drive or a
3340 Direct Access Storage Facility or 3344 Direct Access Storage
(5704-UT3 only). 5704-UT1 is used with SCP 5704-SC1 and
5704-UT3 is used with SCP 5704-SC2. It provides the following
programs that support 80- or 96-column card files: Sort/Collate, List,
Reproduce/Interpret, and Gangpunch. (The following programs are not
provided in 5704-UT1 or 5704-UT3 but are available in the mdl 10
Utilities, 5701-UT1 and 5702-UT1: Data Recording, Data Verifying and
80-96 Conversion Program.)
SYSTEM/3 MODEL 15 BASIC ASSEMBLER
5704-AS1; 5704-AS2
The System/3 mdl 15 Basic Assembler processes source programs
written in the Basic Assembler language, and produces executable
object programs. The program is disk resident on a 5444 Disk Storage
Drive or 3340 Direct Access Storage Facility or 3344 Direct Access
Storage (5704-AS2 only). 5704-AS1 is used with SCP 5704-SC1, and
5704-AS2 is used with SCP 5704-SC2.
SYSTEM/3 MODEL 15
SUBSET ANS COBOL COMPILER AND LIBRARY
5704-CB1; 5704-CB2
SYSTEM/3 MODEL 12 BASIC ASSEMBLER
5705-AS1
The System /3 mdl 12 Basic Assembler program processes source
programs written in the Basic Assembler language and produces
executable object programs. The program is disk resident in a
simulation area on the 3340 Direct Access Storage Facility (DASF) and
operates under control of the mdl 12 SCPo
SYSTEM/3 MODEL 12 SUBSET
ANS COBOL COMPILER AND LIBRARY
5705-CB1
Model 15 COBOL operates under control of the System/3 mdl 15
System Control Programming. 5704-CB1 is used with SCP 5704-SC1,
and 5704-CB2 is used with SCP 5704-SC2. The compiler and library
are disk resident on the 5444 Disk Storage Drive or 3340 Direct Access
Storage Facility or 3344 Direct Access Storage (5704-CB2 only). The
compiler requires as input a COBOL source language program and
produces as output, by means of the system's Overlay Linkage Editor, a
System/3 machine language object program, either cataloged in an
object library, punched'nto 80- or 96-column cards, or written onto a
diskette.
System /3 mdl 12 COBOL is a program that operates under control of
the System/3 mdl 12 System Control Programming. The compiler and
library are disk resident in a simulation area on the 3340 Direct Access
Storage Facility (DASF). The compiler requires as input a COBOL
source language program and produces as output, by means of the
System/3 Overlay Linkage Editor, a System/3 machine language object
program, either cataloged in an object library, punched into 80- or
96-column cards, or written onto a diskette. A source program listing,
diagnostic messages and a main storage map can be requested.
SYSTEM/3 MODEL 15 DISK FORTRAN IV
5704-F01; 5704-F02
SYSTEM/3MODEL 12 DISK FORTRAN IV
5705-F01
Model 15 FORTRAN IV operates under control of the System/3 mdl15
SCPo 5704-F01 is used with SCP 5704-SC1; 5704-F02 is used with
SCP 5704-SC2. The compiler and library are disk resident on the 5444
Disk Storage Drive or the 3340 Direct Access Storage Facility or 3344
Direct Access Storage (5704-F02 only). The compiler requires as input
a FORTRAN source language program and produces as output, by
means of the system's Overlay Linkage Editor, a System/3 machine
language object program, either cataloged in an object library or
punched into 80- or 96-column cards or written onto a diskette. A
source program listing, diagnostic messages and main storage map can
be requested.
System/3 mdl 12 FORTRAN IV is a program that operates under
control of the System/3 mdl12 SCPo The compiler and library are disk
resident in a simulation area on the 3340 Direct Access Storage Facility
(DASF). The compiler requires as input a FORTRAN source language
program and produces as output, by means of the System/3 Overlay
Linkage Editor, a System/3 machine language object program, either
cataloged in an object library, punched into 80- or 96-column cards, or
written onto a diskette. A source program listing, diagnostic messages
and a main storage map can be requested.
SYSTEM/3 MODEL 15 RPG II
5704-RG1; 5704-RG2
Model 15 RPG 1\ operates under control of the System/3 mdl 15
System Control Programming. 5704-RG1 is used with SCP 5704-SC1,
and 5704-RG2 is used with SCP 5704-SC2. RPG II is disk resident on
the 5444 Disk Storage Drive or 3340 Direct Access Storage Facility or
3344 Direct Access Storage (5704-RG2 only). It requires as input an
RPG II source language program and produces as output a System/3
mdl 15 machine language object program, either cataloged in an object
library or punched into 80- or 96-column cards, or written onto a
diskette. A source program listing, diagnostic messages, and a main
storage map can be requested.
SYSTEM/3 MODEL 15 DISK SORT
5704-SM1; 5704-SM9
The System/3 mdl 15 Disk Sort program sorts a file into ascending or
descending sequence. It is resident on a 5444 Disk Storage Drive or a
3340 Direct Access Storage Facility or 3344 Direct Access Storage
(5704-SM9 only). 5704-SM1 is used with SCP 5704-SC1, and
5704-SM9 is used with SCP 5704-SC2.
SYSTEM/3 MODEL 15 MAGNETIC TAPE SORT
5704-SM2; 5704-SM8
The System/3 mdl 15 Magnetic Tape Sort Program sorts a tape file into
ascending or descending sequence. It is resident on a 5444 Disk
Storage Drive or a 3340 Direct Access Storage Facility or 3344 Direct
Access Storage (5704-SM8 only). 5704-SM2 is used with SCP
5704-SC1, and 5704-SM8 is used with SCP 5704-SC2. A configuration that includes three or four tape units is required.
DATA COLLECTION SYSTEM SUPPORT FOR SYSTEM/3
5705-M31
The 5230 Data Collection System Support for System/3 program
product provides the manufacturer with a convenient, practical means
of preparing shop floor data for processing by a user-provided
management accounting system. Data collected by the 5230 Data
Collection System is edited, consolidated, and formatted on the
System/3 for such applications as payroll accounting, inventory
management, and production control. By the customer making simple
changes in the output formats of both program products, 5230 Data
Collections System Support for System/3 can provide input to and use
turnaround documents from the System/3 Shop Loading and Control
program product (5702-M51).
SYSTEM/3 MODEL 12 RPG
5705-RG1
System/3 mdl 12 COBOL is a program that operates under control of
the System/3 mdl 12 System Control Programming. The compiler and
library are disk resident in a simulation area on the 3340 Direct Access
Storage Facility (DASF). The compiler requires as input a COBOL
source language program and produces as output, by means of the
System/3 Overlay Linkage Editor, a System/3 mdl 12 machine
language object program, either cataloged in an object library, punched
into 80- or 96-column cards, or written onto a diskette. A source
program listing, diagnostic messages and a main storage map can be
requested.
SYSTEM/3 MODEL 12 DISK SORT
5705-SM1
The System/3 mdl 12 Disk Sort sorts a file into ascending or descending sequence. The program is resident in a simulation area on the 3340
Direct Access Storage Facility (DASF) and operates under the control of
the mdl12 SCPo
- ---------
.:.:=:: :5~5: ISG
PS S.16
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
SYSTEM/3 MODEL 12 MAGNETIC TAPE SORT
5705-SM2
The System/3 mdl 12 Magnetic Tape Sort sorts a tape file into
ascending or descending sequence. It is resident in a simulation area
on the 3340 Direct Access Storage Facility (DASF) and operates under
the control of the mdl 12 SCPo A configuration that requires three or
four tape units is required. The program is functionally identical to the
System/3 mdl 10 Disk-Resident Magnetic Tape Sort program
(5702-SM2).
SYSTEM/3 MODEL 12 DISK RESIDENT
CARD UTILITIES (5705-UT1)
This System/3 program is resident in a simulation area on the 3340
Direct Access Storage Facility (DASF), and operates under control of
the mdl 12 SCPo The following programs are provided: Sort/Collate,
List, Reproduce/Interpret, and Gangpunch. (The following programs
included in the mdl 10 Utilities, 5701- UT1 and 5702- UT1, are not
available for the mdl 12: Data Recording, Data Verifying, and 80-96
Conversion program.)
SYSTEM/3 UTILITY PROGRAM for
1255 MAGNETIC CHARACTER READER
5705-UT2
This utility program provides the System/3 mdl 12 user control of
document processing on the 1255 Magnetic Character Reader. It
provides a means of reading MICR-encoded documents from the 1255,
accumulating document totals and amount field totals for each pocket,
and placing the data from the documents on output disk or tape and
printer files. The program is designed to fulfill the basic requirements
of the'On-Us' data capture run required for all Demand Deposit
Application Programming.
SYSTEM/7 PROGRAM PREPARATION FACILITIES
5707-AA1
System/7 Program Preparation Facilities provides stand-alone program
preparation capability for the System/7. This capability is complementary to the MSP /7 Host Program Preparation Facility II and allows the
user to select which of the two methods most suitably meets the user's
requirements for System/7 program preparation.
TREND ANAL YSIS/370 (5740-F12)
Color Graphics Support Feature (5707-F12)
Trend Analysis/370 is an easy-to-use, interactive, IMS/VS-based
computer application designed to allow presentation of time series data
in tabular report form on a 3270 Information Display System. Using the
System/7 Color Graphics Support Feature, presentation can be done
graphically on a color television monitor. Time series numerical data,
either from an organization's internal systems or from the external
environment, can be formatted and stored for use by the system.
MANUFACTURING MONITORING SYSTEM VERSION 2
5707-M33 (OS/VS) - 5707-M34 (DOS/VS)
The Manufacturing Monitoring System (abbreviated to MMS) is a
program product designed for realtime monitoring of plant floor
activities and resources.
MSP/7 DISK SUPPORT SYSTEM (DSS/7)
5707-SC2
The MSP /7 Disk Support System is a group of programs which reside
on the 5022 Disk Storage Module and provide program initiation
capability using the 5028 Operator Station, and service programs to
support disk organization and maintenance. The Disk Support System
supports both Direct Program Control and Cycle Steal 5022s.
SYSTEM/7 PROCESS CONTROL PROGRAM (PCP /7)
5707-XN3 (Using HPPF-II/OS Systems)
5707-XN4 (Using HPPF/II/DOS Systems)
5707-XN5 (Using System/7 Program Preparation)
System/7 Process Control Program (PCP /7) is designed to provide
process monitoring, supervisory control, and direct digital control of
continuous industrial processes. The program executes in a System/7
and is prepared on a S/360 or S/370 using the MSP /7 Host Program
Preparation Facility-II (HPPF-II) or on a System/7 using the System/7
Program Preparation Facilities (System/7 PPF). Process operator
communication with the program is supported through the RPQ 7414
Interactive Console or 5028 Operator Station, used as a Process
Operator Console (POC) attached to the System/7. In addition, support
is provided for communications to a S/360, S/370, 1800 or 1130
System operating with the appropriate Distributed System Program
(DSP).
New
SYSTEM TRANSACTION GENERATOR SYSTEM (TGS/7)
5707-XR1 - Stand-Alone
5740-XR3 - Host Preparation (OS, OS/VS1, OS/VS2)
TGS/7 is a System/7-2790 program designed to increase the user's
It provides pre-coded transaction
efficiency and productivity.
processing modules common to most data collection applications, and
will support the 2790, disk and teleprocessing facilities available to the
System/7. The data collection transaction modules provided include
input checking, basic calculations, disk processing, message processing, and inquiry processing.
5280 ASSEMBLER LANGUAGE
5280-AS1)
The 5280 Assembler language provides a symbolic programming
language used to write programs for the 5280 system. This program
consists of an assembler and the 3740 ACL Conversion Aid program.
5280 COBOL-OS/VS HOST COMPILER and LIBRARY
5708-CB1
5280 COBOL-OS/VS Host Compiler and Library compiles on a S/370,
30XX or 4300 under VM/SP, OS/VS1 or OS/VS2 (MVS). Output of
the compiler is a 5280 machine-language object program that will
execute on a 5285, 5286 or 5288. This object program may be copied
to diskette (except for VM/SP) for transfer to a 5280 system or
transmitted via communications directly to a 5280 system.
5280 COBOL-DOS/VSE HOST COMPILER and LIBRARY
5708-CB2
5280 COBOL-DOS/VSE Host Compiler and library compiles on a
S/370, 30XX or 4300 under DOS/VSE. Output of the compiler is a
5280 machine-language object program that will execute on a 5285,
5286 or 5288. This object program may be copied to diskette for
transfer to a 5280 system or transmitted via communications directly to
a 5280 system.
5280 COBOL-SYSTEM/34 HOST COMPILER and LIBRARY
5708-CB3
5280 COBOL-System/34 Host Compiler and Library compiles on a
System/34 under control of the System Support Program (SSP).
Output of the compiler is a 5280 machine language object program that
will execute on a 5285, 5286, or 5288. This object program may be
copied to diskette for transfer to a 5280 system or transmitted via
communications directly to a 5280 system.
5280 COBOL-SYSTEM/38 HOST COMPILER and LIBRARY
5708-CB4
5280 COBOL-System/38 Host Compiler and Library compiles on a
System/38 under control of the Control Program Facility (CPF). Output
of the compiler is a 5280 machine language object program that will
execute on a 5285, 5286, or 5288. This object program may be copied
to diskette for transfer to a 5280 system or transmitted via communications directly to a 5280 system.
5280 PROCEDURE CONTROL LANGUAGE
5708-CL1
The 5280 Procedure Control language provides 5280 users with job
stream capability and the ability to execute a program with little or no
operator intervention. It consists of a control program and supporting
programs. Use of this licensed program is optional for 5280 users.
5280 COMMUNICATIONS UTILITIES
5708-DC1
The 5280 Communications Utilities program, used with the Communications Adapter feature (#2500) consists of Communications Access
Method (CAM) support, a set of communications utility programs, and
an interface to the access method for communications application
programs written in 5280 COBOL, 5280 DE/RPG, or 5280 Assembler
language.
5280DE/RPG
5708-DE1
DE/RPG provides advanced data entry and associated processing
capability for the 5280 system. DE/RPG uses the Data Description
Specifications (DDS) form, which is also supported on the System/38.
An RPG subroutine capability is included which is a subset of RPG "
calculation operation codes. DE/RPG consists of a Compiler and a
Source Entry Program.
---- ---- ----
PS S.17
Do not reproduce without written permission
.=..=.: == ';" == ISG
Aug 83
New
PRODUCT SUMMARY· SOFTWARE
5280·3270 EMULATION
5708·EM1
5280 - 3270 Emulation allows the 5280 Distributed Data System to
appear as selected 3270 control units and devices.
5280 SYSTEM CONTROL PROGRAMMING
5708·SC1
5280 System Control Programming (SCP) provides the capability to
perform basic functions necessary for the operation of the system. The
SCP has been designed for ease of installation and is provided by IBM
at no additional charge.
5280 SORT/MERGE
5708·SM1
The 5280 Sort/Merge consists of a Sort program and a Merge
program. The Sort and Merge programs support any disk and diskette
data set organization supported by the 5280 system. The 5280 Merge
program supports multi-volume data sets. The 5280 Sort program
sorts a single disk or diskette data set into ascending or descending
sequence.
5280 UTILITIES
5708·UT1
Initialization Utility, Clear Utility, Label Maintenance Utility, Label List
Utility, Copy Utility, Print Utility, SCS/BSC (3741) Print Utility, Resource
Allocation Utility, 3740 Format Conversion Utility, Compress Utility,
Key- Entry Utility, System Status Utility, Menu Configuration Utility,
Menu Utility and Data Set Display Utility.
1130 COBOL
5711·CB1
1130 COBOL implements a
according to specifications
Institute. It operates under
Modification Level 9 and later
high-level business language designed
of the American National Standards
1130 Disk Monitor System Version 2,
releases.
1130 LINEAR PROGRAMMING SYSTEM
5711·C01
The Linear Programming System/1130 (LPS/1130) provides 1130 Disk
Monitor Version 2 users with a simple, easy-to-use and easy-tounderstand means of solving linear programming problems. It offers
many significant advantages over LP-MOSS/1130. Performance is
substantially better than LP- MOSS /1130 and, in addition, LPS /1130
will take advantage of additional core storage and input-output devices.
Input data for LPS/1130 are compatible with those of LP-MOSS/1130
and LPS/360.
ELECTRONIC CIRCUIT ANALYSIS PROGRAM II
1130 (5711·EE1)· S/360(5734·EE1)
Provides a flexible and powerful tool for investigating the behavior of
electronic circuits.
1130 CONSTRUCTION ESTIMATING PROGRAM
5711·M61
This program provides the ability for a contractor in the construction
industry to produce fast, accurate cost estimates for construction
projects. Summaries of estimated costs may be produced for
subdivisions of work for a project and for the entire project.
1130 CONSTRUCTION COST CONTROL SYSTEM
5711·M62
The Construction Cost Control System is designed to assist a construction contractor in the monitoring and control of job construction costs.
1130 DISTILLATION PROGRAM
5711·P71
The Distillation Program is a fast, efficient, and versatile program that
solves the steady state distillation problem for a multi-feed, multisided raw, multi-heat exchange column by rigorous heat and material
balances. The program provides the user a distillation computation
capability normally found only in programs written for large machines.
The ability to solve complex distillation problems on the 1130 meets a
growing need of plant operating engineers, plant technical service
engineers, process designers, consultants, and students.
SUBROUTINE L1BRARY·MATHEMATICS (SL·MATH)
1130 and 1800 (5711·XM2)
S/360 and S/370 (5736·XM7)
SL-MATH provides FORTRAN users with powerful computational tools
to solve their mathematical problems.
PROJECT CONTROL SYSTEM 11/1130
PCS 11/1130 (5711·XP1)
PCS II / 1130 provides a basic tool to aid management in the planning,
supervising and controlling of project-oriented work by the critical path
method. In addition to critical path analysis, the system provides
capability for summarizing externally prepared resource and cost
information. For critical path networks, PCS 11/1130 processes 2,000
activities, either in the form of precedence lists or, alternatively, in IJ
notation. Its design allows for a simple approach to networking, but
also offers many of the features normally found only in programs
designed for large computers.
1130 CONTINUOUS SYSTEM MODELING PROGRAM II
1130 CSMP II (5711·XS1)
The 1130 Continuous System Modeling Program II (1130 CSMP II)
provides a versatile means for digital simulation of continuous systems
or processes. It uses a block-oriented input language familiar to
engineers and scientists. By means of the console keyboard and output
devices, 1130 CSMP II provides the user with an online interactive
mode of operation while developing and testing continuous system
models. The simplicity of the language statements and console
procedures enables a user to become rapidly proficient with the
program.
CUSTOMER INFORMATION SYSTEM
APPLICATION DESIGN SERVICE (CIS ADS)
5712·AAA with Feature #9096
Customer Information System Application Design Service (CIS ADS) is
a special installation service to support the marketing and the installation of the Customer Information System concept to public utility
customers. This service provides utility customers with a standardized
solution for the CIS application along with planning assistance that
helps utility customers understand this solution. The service includes a
description and planning guide ... design specifications ... planning
assistance.
SYSTEM/38 BASIC
5714·BA1
System/38 BASIC, which includes both an interpreter and a compiler,
is a high-level interactive programming language for use in problem
solving and commercial application areas. The language provides the
ease-of-use characteristics associated with BASIC, while providing
System/38 functions, such as the use of externally described files in
programs, and a CALL statement to access programs written in other
languages on the System/38.
SYSTEM/38 COBOL
5714·CB1
System/38 COBOL operates under IBM System/38 Control Program
Facility. The program consists of: Compiler ... Command for Invoking
the Compiler ... Source File for COBOL Source Statements ... Compilation Message File ... Syntax Checker (for Source Entry Utility).
------- -------=:-:a ::5~~ ISG
PS S.18
Do not reproduce without written permission
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/38 CONVERSION REFORMAT UTILITY
5714-CV2
The System/38 Conversion Reformat Utility is provided to assist the
System/3 conversion by providing function similar to the System/3
Disk Sort Utility with the exception of summary sort. The Conversion
Reformat Utility performs a variety of operations classified in the
general categories of SORT, MERGE, and COPY. The utility is designed
to operate upon data from either a data base or device file. Operations
similar to SORT, MERGE, and COpy are also provided by the
System/38 Data Base Data Management and COpy support.
SYSTEM/34 TO SYSTEM/38 CONVERSION AID
5714-CV5
The System/34 to System/38 Conversion Aid is designed to assist a
System/34 customer in migrating to the System/38. Executing on a
System/34 and a System 38, this aid converts System/34 RPG and
Auto Report source code, OCl, displays, sorts, menus, and data files,
which can then be processed on a System/38. In addition, programs
that substitute for System/34 functions are provided for the
System/38.
SYSTEM/3 CCP TO SYSTEM/38 CONVERSION AID
5714-CV7
The System/3 CCP to System/38 Conversion Aid helps System/3
mdls 8, 10 disk, 12, and 15 users convert their CCP programs to run on
the System/38. The Conversion Aid will reduce the time required to
make a number of the repetitive and time consuming changes to the
source code and to identify where user decisions and / or changes are
necessary.
SYSTEM/38 DISTRIBUTION MANAGEMENT SYSTEM
(DMS/38) CUSTOMER SERVICE
WITH PURCHASING APPLICATIONS
BILLING ... 5714-D41
ACCOUNTS RECEIVABLE ... 5714-D42
INVENTORY CONTROL ... 5714-D43
SALES ANALYSIS ... 5714-D44
PURCHASING ... 5714-D45
The Distribution Management System for the System/38 (DMS/38)
offers a practical approach to information processing for the distributor.
The DMS/38 Customer Service and Purchasing programs are
functionally based on the programs of the Distribution Management
Accounting System (DMAS II) Release 2, which is designed to run on
the System/34. These applications have been enhanced to take
advanta~e of the advanced capabilities of integrated data base of the
System/38.
SYSTEM/38 DISTRIBUTION MANAGEMENT SYSTEM INVENTORY MANAGEMENT, PRODUCT
REPLENISHMENT and ORDER VALIDITY EVALUATION
DMs/38 -IMPROVE (5714-D46)
Increasing costs, larger capital requirements, more demanding
customers, and tougher competition are among the many challenges
facing businesses today. If your customers have inventory to manage,
they are probably facing problems which call for a set of proven
techniques to help improve the management and control of this
important investment. IMPROVE is designed to help your customers
meet these challenges. It provides a tool to assist them in ordering the
right items, in the correct quantities, at the proper frequencies, and at
the optimum time.
sYSTEM/38 DISTRIBUTION MANAGEMENT SYSTEM
FINANCIAL APPLICATIONS (DMs/38)
GENERAL LEDGER ... 5714-D47
ACCOUNTS PAYABLE ... 5714-D48
PAYROLL ... 5714-D49
The System/38 Distribution Management System (DMS/38) Financial
Applications provide an integrated and comprehensive workstationoriented financial control system for the small-to-Iarge size distributor.
The Accounts Payable, General ledger, and Payroll applications are part
of the Distribution Management System, pr<;>viding computer applications to key areas of the distribution process.
SYSTEM/38 MANUFACTURING ACCOUNTING AND
PRODUCTION INFORMATION CONTROL SYSTEM
(SysTEM/38 MAPICs)
PRODUCTION CONTROL AND COSTING .. , 5714-M41
PAYROLL ... 5714-M42
ACCOUNTS PAYABLE ... 5714-M43
ACCOUNTS RECEIVABLE ... 5714-M44
INVENTORY MANAGEMENT ... 5714-M45
PRODUCT DATA MANAGEMENT ... 5714-M46
GENERAL LEDGER ... 5714-M47
SALES ANALYSIS .,. 5714-M48
ORDER ENTRY AND INVOICING ... 5714-M49
DATA COLLECTION SYSTEM SUPPORT ... 5714-M4A
MATERIAL REQUIREMENTS PLANNING .. , 5714-M4B
CAPACITY REQUIREMENTS PLANNING ... 5714-M4G
The System/38 Manufacturing Accounting and Production Information
Control System is based on System/34 MAPICS and is enhanced by
utilizing the advanced systems and programming facilities of the
System/38. It provides an integrated and comprehensive workstationoriented accounting, financial, and manufacturing control system for the
manufacturing industry and some of the like process industries. The
Accounts Payable, General ledger, and Payroll applications are
designed to meet the needs of both the manufacturer and the
distributor.
SysTEM/38 REMOTE JOB ENTRY FACILITY (RJEF)
5714-RC1
The System/38 Remote Job Entry Facility program provides support for
the System/38 to function as a remote job entry (RJE) workstation for
submission of jobs to a host S/370, 30XX, or 43XX using Binary
Synchronous Communications (BSC) and/or Synchronous Data Link
Control under Systems Network Architecture (SNA/SDlC).
SysTEM/38 RPG III'
5714-RG1
System/38 RPG III is an upward compatible (with source changes)
extension of the proven RPG II programming language available on
System/3, System/34, and other IBM systems. New capabilities have
been added to support System/38 Data Base Data Management,
integrated work station support, user controlled logic flow, improved
interprogram communications, and increased productivity. Major
features of RPG III are in the areas of program design flexibility,
additional operation codes for increased function, and documentation.
sysTEM/38 CONTROL PROGRAM FACILITY (CPF)
5714-551
The System /38 Control Program Facility (CPF) program, used with
System/38 machine functions, provides these major capabilities: Work
Management ... Data Management ... Control language (Cl) ... Security
... Message Facilities ... Spooling ... Communications ... Installation
(System Specialization) ... System Services.
sysTEM/38 CONTROL PROGRAM FACILITY (CPF)
RELEASE 5.0 Enhancements
5714-Ss1
System/38 CPF is enhanced in Release 5.0 to include: Support for
additional devices, communication enhancements, a commitment
control (recovery/restart) function and many other functional improvements.
sysTEM/38 INTERACTIVE DATA BASE UTILITIES
IOU (5714-UT1)
.
The System/38 Interactive Data Base Utilities program is a package of
data handling utilities. The utilities can be invoked by multiple users,
concurrent with other system operation.
SysTEM/38 ADVANCED PRINTER FUNCTION UTILITY
5714-UT2
The'System/38 Advanced Printer Function program is a utility that
provides users with a method of accessing the addressable matrix
printing functions available on the 5224 Printer mdls 1 and 2 and the
5225 Printer mdls 1, 2, 3 and 4. With this utility, the user may design a
form layout, design logos and special characters,· and merge this data
with a predefined form.
---- ---
PS S.19
Do not reproduce without written permission
= - - :§~§: ISG
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/38 ADMINISTRATIVE MANAGEMENT
5714-WP1
The System/38 Administrative Management program consists of a set
of applications designed to improve the productivity of an organization's
personnel in the operation of some of the.i~ bu~iness, clerica.1 and
professional tasks. Any System/38 user familiar with the ~peratlon of
the 5250 Administrative Display System (1 ,920-character displays) may
use the Administrative' Management program which consists of:
Calendar Management ... Correspondence Control ... Message Facility.
SYSTEM/3S TEXT MANAGEMENT
5714-WP2
The System/38 Office/38 Text Management pr~gram ~rovides t~e
capability for System/38 users to create, store, retrieve, revise and print
documents. The user may access the System/38 data base from the
Text Management program interactively at edit time or at print time.
This provides the capability to selectively include data b~se in~ormation
within a text document. Forms may be created and filled-in on the
display or stored in the system for later use.
SYSTEM/38 WORKSTATION SEARCH FACILITY
5714-WS1
The System/38 Workstation Search Facility p~ovides the workstati.on
user with a powerful, yet easy-to-use tool to display records from disk
files based on terminal user-selected search criteria. This System/38
product is based on the proven System/34 Workstation Search Facility.
It includes enhancements that provide online assistance to the user
during operation.
SYSTEM/38 DATA PREPARATION
5714-XA4
The System/38 Data Preparation program for the retail industry accepts
transaction log data written on diskettes at 5265 Point-of-Sale
Terminals and hand-carried to the System/38 host system. Data
Preparation restructures 5265 and 5266 Point-of-Sale Term.inal
transaction log records into logical records, routes them to appropriate
files and establishes initial transaction controls. The user is then able
to a~cess the logical records written by Data Preparation in the data
base of the System/38.
SYSTEM/38 OFFICE/38 - APPLICATIONS MADE EASY
5714-XE1
The Applications Made Easy program. is one of .a series of p~ograms
within System/38 Office/38, all of which are. ~eslgr:'ed to help Improve
the productivity of the professional and administrative employee In the
modern office environment. With Applications Made Easy from IBM,
it's not necessary to understand computers to get productive work from
someone. All that's needed is an understanding of the job to be done,
and an understanding of English. Without learning computer languages, or memorizing complicated co~es or ~bbreviations, the u.~er
may readily store and retrieve business Information, and has the ability
to use the System/38 to: Enter and change information ... Format new
reports .,. Do calculations '" Process daily transactions.
SYSTEM/38 DISPLAY INFORMATION FACILITY
5714-XR1
The System/38 Display Informatio.n Facil.ity f:?rovides .the Sys!em/38
user with a powerful tool to bUild online information applications
consisting of combinations of alpha search, inquiry, update, add, delete,
list, and user programs. This facility is designed to be use~ to gener~te
programs that will give the user online access to d~ta flies. A hlg~
degree of tailoring capability permits the users to Incorporate their
unique data base file formats, display formats, and report formats.
These formats could be created, for example, using the System/38
Data Description Specifications (DDS) or the System/38 Screen Design
Aid (SDA). The result is a user-designed online information application.
Display Information Facility is applicable to most indus~1)' classifications. Distributors and manufacturers can use the faCility to create
online information applications consisting of interrelated searches,
inquiries, and lists for customer and receivables files; c~ntractors .can
do searches, inquiries, 8pd lists for their employees. ~nd Jobs; hospl.tals
can build patient and guarantor searches, inquiries, enter patient
information, and maintain hospital files.
SYSTEM/23 ASYNCHRONOUS COMMUNICATIONS
5715-AC1
The System/23 Asynchronous Communications program con~ist~ of
communications access method support, a set of communications
customer support functions, and a facility for user-written com~uni~a
tions programs using the System/23 BASIC language. In conJunctl~n
with the communications access method, the Asynchronous Communications Terminal customer support function provides the user with an
interactive interface to perform asynchronous communications.
SYSTEM/23
BINARY SYNCHRONOUS COMMUNICATIONS
5715-BC1
The System/23 Binary Synchronous Communications program consists
of communications access method support, a set of communications
customer support functions, and a facility for user-written communications programs using the System/23 BASIC language. In conjunction
with the communications access method, the communications
customer support functions can perform the following data transfer
functions using Binary Synchronous Communications protocol:
Transmit batch data '" Receive batch data ... Inquire into a host system
and receive batch data.
SYSTEM/23 CLIENT ACCOUNTING
5715-CA1
The System/23 Client Accounting program provides the accountant
with powerful tools to perform client write-up activities in a more
productive manner. The use of the computer for data entry, processing
and report generation allows accountants to dedicate more time for the
analysis and consulting functions of their profession. The program
design provides familiar accounting-based functions that are easy to
implement and use. The application's functional richness and variety
provide the accountant the ability to service a wide range of client
businesses.
5110/5120 BASIC TO SYSTEM/23
CONVERSION AID (5715-CV1)
The 5110/5120 BASIC to System/23 Conversion Aid consists of
programs designed to assist in converting 5110/5120 application
programs written in the BASIC language to System/23 BASIC.
SYSTEM/23 BUSINESS REPORT /
APPLICATION DEVELOPMENT SYSTEM III
BRADS III (5715-RG2)
The System/23 Business Report/ Application Development System. III
brings data base power to users of the System(23 Datamast~r. ~s~ng
BRADS III, users can productively develop and Install system-JustifYing
applications, most likely without becoming or hiring. programmers.
Users can also expand the value of the System/23 BUSiness Management Accounting System applications and applications written by third
parties by querying the data bases and by developing new reports.
PRINT SPOOL
5715-SP1
System/23 Print Spool (5715-SP1) progr~m provides a ~ign~ficant ~ew
capability for customers using the 5247 Disk Storage Unit With multiple
System/23 computers attached, and requiring more flexibility in
scheduling printed output. The print spool program all<;>ws output fro~
BASIC application programs to be stored on a 5247 Disk Stora~e Unit
for subsequent printing by a printer attached to the same or a different
System/23 computer. During the printing ~peration, the Sys~em/23
computer controlling the printer may also be Simultaneously running one
other BASIC application. Output created by System/2~ Word
Processing programs (5715- WP1 or 5715-WP2) cannot be f:?rlnte~ by
the Print Spool program, and these programs cannot be reSident In a
System/23 computer that is utilizing the Print Spool programs.
SYSTEM/23 WORD PROCESSING
5715-WP1
The System/23 Word Processing program provides the functions
necessary for text processing and DP /WP merge processing.
Functions are selected by the operator of the System/23 Datamaster
through control keys, abbreviations typed on the request line, and
menus. For menu-supported tasks, the operator selects the proper
menu, chooses the appropriate options from that menu, ~nd then
proceeds with the task. For control key supported functions, the
operator presses the proper key and then proceeds with the task.
SYSTEM/23 WORD PROCESSING II
5715-WP2
System/23 Word Processing" has all of the functions of 5715-W.P1
and, in addition, the following functions have been. added w~lch
enhance the capabilities for stand-alone Word Processing, combined
Word Processing/Data Processing, and multi-page document
preparation. In addition, many of these functions incorporate an
additional operator ease-of-use capability.
---- ----- -------------- - ISG
---_.-
Do not reproduce without written permission
PS S.20
PRODUCT SUMMARY - SOFTWARE
SYSTEM/23 BUSINESS MANAGEMENT
ACCOUNTING SYSTEM for DATAMASTER (Diskette)
GENERAL LEDGER for DATAMASTER ... 5715-XX2
ACCOUNTS PAYABLE for DATAMASTER ... 5715-XX3
ACCOUNTS RECEIVABLE for DATAMASTER ... 5715-XX4
PAYROLL for DATAMASTER ... 5715-XX5
INVENTORY ACCOUNTING for DATAMASTER ... 5715-XX6
BILLING for DATAMASTER .,. 5715-XX7
These multi-industry programs for the System/23 Datamaster
(Diskette) provide the user with powerful tools to perform business
accounting while providing additional management information. The
programs contain functions applicable to a wide range of industry
classifications. The program design provides an accounting base of
information and incorporates a flow of information in terms that are
familiar to the user. This base of information is then available to
improve user productivity through the managerial reporting provided by
the programs.
SYSTEM/23 BUSINESS MANAGEMENT
ACCOUNTING SYSTEM for DATAMASTER (Disk)
GENERAL LEDGER for DATAMASTER ... 5715-XZ2
ACCOUNTS PAYABLE for DATAMASTER ... 5715-XZ3
ACCOUNTS RECEIVABLE for DATAMASTER ... 5715-XZ4
PAYROLL for DATAMASTER ... 5715-XZ5
INVENTORY ACCOUNTING for DATAMASTER ... 5715-XZ6
BILLING for DATAMASTER .,. 5715-XZ7
These multi-industry programs support the System/23 with the 5247
Disk Storage Unit attached. These programs are an extension of the
System/23 Business Management Accounting System for Datamaster
(Diskette) in that both sets (Diskette and Disk) of programs have
identical accounting functions. These multi-workstation programs
provide the user with powerful tools to perform business accounting
while providing additional management information. The programs
contain functions applicable to a wide range of industry classifications.
CLINICAL LABORATORY
DATA ACQUISITION SYSTEM (CLDAS)
5718-H11
The 1800 Clinical laboratory Data Acquisition System (ClDAS)
provides a basic framework for satisfying the data acquisition and
processing requirements which exist in clinical laboratories of modern
hospitals. It is designed to help alleviate some of the more pressing
problems being created by an ever increasing demand for more and
better laboratory services. ClDAS is directed towards increasing the
productivity of the laboratory technologist, reducing the likelihood of
errors in the testing process, and improving responsiveness of the
laboratory.
CLINICAL LABORATORY MANAGEMENT SYSTEM
(CLMS) (5718-H12)
The 1800 Clinical laboratory Management System is a system of files
and procedures designed to satisfy the basic information processing
requirements of clinical laboratories in modern hospitals. Using the
Clinical laboratory Data Acquisition System (ClDAS) program product
(5718-H11) or its equivalent for the data acquisition function, ClMS
provides a broad base for an information management system. elMS,
with its unique file approach, directs and controls the flow of information from receipt of the initial requisition for a test to final result
reporting. The MPX feature (#6000) to ClMS (5718-H12) facilitates
the conversion of ClMS such that it can operate (exclusive of those
programs designed to interface ClDAS) under the 1800 MPX
(Multiprogramming Executive System) Operating System. Those ClMS
programs not converted are DIAGN, ERRRR, INTWW, PKINT, PUNT,
SSSSS, SUWlG, SYMB, UPSET, and STATA.
Aug 83
New
PROSPRO II (TSX/1800)
PROCESS SYSTEMS PROGRAM
5718-P81
1800 PROS PRO II is a unique programming approach to industrial
control computer applications which are mostly continuous operations.
It offers simple, fill-in-the-blanks, tabular programming of the 1800
Data Acquisition and Control System, enhancing and in no way
obstructing user access to the TSX operating system. PROSPRO II
substantially reduces the programming effort associated with the
installation of process control systems. User coding is only necessary
for special instruments, special logs, and special messages to
operators. Applications that are dedicated DDC (Direct Digital Control)'
supervisory control, operation sequencing, data acquisition, or
combinations of these are efficiently served by using features of
PROS PRO II that are applicable. In addition, process data management
is provided.
1800 REPORT PROGRAM GENERATOR (RPG)
5718-RG1
The 1800 Report Program Generator (RPG) significantly enhances the
commercial data processing capability of the 1800 Data Acquisition and
Control System. The 1800 RPG operates under the 1800 Multiprogramming Executive System (MPX), and provides a language which is
easy to learn and specifically oriented to commercial applications such
as accounts receivable, payroll, inventory accounting, and sales
analysis. In addition, a file conversion utility (DFCNV) enables RPG to
be used for generating operating reports from sensor-based disk data
files created by FORTRAN-coded online programs.
SYSTEM/7 ASSEMBLER
5718-SC2 (Features #7027, #7029, #9005)
System/7 Assembler language is a symbolic programming language for
use with the System/7. This language provides the programmer with a
convenient means of writing machine instructions, designating
registers, and specifying format and addresses of storage areas, data,
and constants. All operational capabilities of the System /7 can be
expressed in System/7 Assembler language programs.
1800 CHROMATOGRAPH MONITORING
5718-XX1
1800 Chromatograph Monitoring provides advanced data acquisition
and fused peak analysis techniques for the simultaneous monitoring of
multiple chromatographs in realtime. The program scans the signals
from the chromatographs, analyzes the peak spectrum, and produces
the reports. It is particularly well suited to the quality-control laboratory
environment.
SERIES/1 REALTIME PROGRAMMING SYSTEM
INDEXED ACCESS METHOD
VERSION 1 (5719-AM1)
This program provides improved usability and storage utilization.
Additional function and the elimination of certain restrictions are also
included. The product contains major enhancements such as: More
efficient use of data file space to alleviate the problem of running out of
space in a particular area of a file; a special online utility to define index
data set organization; improved integrity via a write verify option; a
macro to extract file attribute information from an index data set; key
checking; termination clean-up and an immediate write option.
SERIES/1 REALTIME PROGRAMMING SYSTEM
INDEXED ACCESS METHOD
VERSION 2 (5719-AM2)
The Series/1 Realtime Programming System Indexed Access Method
Version 2 allows the user to build, access, and maintain user-defined
records in indexed data sets via predetermined fields called keys. The
program operates under control of the Series!1 . Realtime Programming
System Version 5 or Version 6 and provides improvements over
previous versions for usability, capability for improved performance and
'
enhanced flexible utility functions.
----- - -----
==.: :§~§: ISG
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
PS S.21
Aug 83
New
EVENT DRIVEN EXECUTIVE INDEXED ACCESS METHOD
5719-AM3
PROGRAM PREPARATION SUBSYSTEM VERSION 5
5719-AS5
The Series/1 Event Driven Executive Indexed Access Method provides
data management facilities supporting indexed file operations for the
Series/1 Event Driven Executive system. This facility operates under
the Series/1 Event Driven Executive Basic Supervisor and Emulator
(5719-XS1). It allows the user to build, access, and maintain userdefined records in indexed data sets via a predetermined field called a
key. The Indexed Access Method builds an index of keys which
provides fast access to records in an Indexed Access Method data set.
The access method supports a high degree of insert/delete activity
providing both direct and sequential access to the data from mUltiple
programs concurrently accessing the same or different indexed data
sets. Applications that use the Indexed Access Method support can be
programmed in the Event Driven Executive Language, PL/I or COBOL.
It is supported by the Series/1 Event Driven Executive Sort/Merge
program (5719-SM1) which will accept Indexed Access Method data
sets as input files. Also provided is a utility to define and maintain
indexed data sets. This utility can be used from a user terminal or
program.
The Series/1 Program Preparation Subsystem Version 5 program
contains changes to support functions offered in Version 5 of the
Series/1 Realtime Programming System, a Text Editor, and a repackaging to include facilities required for development use.
EVENT DRIVEN EXECUTIVE
INDEXED ACCESS METHOD VERSION 2
5719-AM4
The Series/1 Event Driven Executive (EDX) Indexed Access Method
Version 2 is an extension of the Indexed Access Method (5719-AM3).
The Indexed Access Method allows the user to build, access, and
maintain user-defined records in indexed data sets via predetermined
fields called keys. Version 2 of the EDX Indexed Access Method, which
operates under the Series/1 Event Driven Executive Version 3.1
(5719-XS3), provides improvements for usability, capability for
improved performance, and enhanced flexible utility functions.
EVENT DRIVEN EXECUTIVE MACRO ASSEMBLER
5719-ASA
The Series/1 Event Driven Executive Macro Assembler allows the user
to assemble application programs or program modules concurrent with
the execution of other programs operating under the control of the
Series /1 Event Driven Executive Basic Supervisor and Emulator
(5719-XS1).
PROGRAM PREPARATION SUBSYSTEM
5719-AS1
The Series/1 Program Preparation Subsystem is a set of four programs
that provide the user a batch processing environment, and aids for
preparing programs for execution on the Series/1. The four components are: Job Stream Processor, Text Editor, Macro Assembler, and
the Application Builder. These programs will run in the batch partition
as task sets under Series/1 Realtime Programming System (5719PC1).
PROGRAM PREPARATION SUBSYSTEM VERSION 2
5719-AS2
The Series/1 Program Preparation Subsystem Version 2 program
provides all the facilities of the Series/1 Program Preparation Subsystem Version 1 (5719-AS1) plus support for the following additional
features: 4962 Disk Storage Unit mdls 3 and 4 support ... new overlay
manager controlling both disk and storage overlays .... new job stream
processor functions ... additional editing commands.
PROGRAM PREPARATION SUBSYSTEM VERSION 3
5719-AS3
The Series/1 Program Preparation Subsystem Version 3 is a program
which provides all the facilities of the Program Preparation Subsystem
Version 1 (5719-AS1) and Version 2 (5719-AS2) plus usability and
functional enhancements.
PROGRAM PREPARATION SUBSYSTEM VERSION 4
5719-AS4
The Program Preparation Subsystem Version 4 program provides all the
facilities of the Program Preparation Subsystem Version 1 (5719-AS1),
Version 2 (5719-AS2), and Version 3 (5719-AS3). The Program
Preparation Subsystem Version 4 also has the ability to prepare
applications to execute on the Realtime Programming System Versions
1, 2, 3, and 4. Improvements in assembler performance have been
made. Also, several usability enhancements are incorporated. Note: If
the Command Language Facility of Realtime Programming System
Version 4 (5719-PC4) will be used, then 5719-AS4 is required.
SERIES/1 PROGRAM PREPARATION SUBSYSTEM
VERSION 6 (5719-AS6)
The Series/1 Program Preparation Subsystem Version 6 program has
been enhanced to support the functions offered in the Realtime
Programming System, Version 6, and the Multiprocessing feature.
SERIES/1-S/370 CHANNEL ATTACH
5719-CA1
The Series/1-S/370 Channel Attach program runs under the control of
the Series/1 Realtime Programming System. This program, when used
in conjunction with the 4993 mdl 1 Series/1-S/370 Termination
Enclosure and the Series/1-S/370 Channel Attachment feature
(#1200), provides the Series/1 user with the ability to communicate
with a S/370 (mdls 135-168)' and the 3031, 3032, 3033, 4331, and
4341 Processors over a selector or block multiplexer channel.
SERIES/1 REALTIME PROGRAMMING SYSTEM
COBOL COMPILER AND RESIDENT LIBRARY (5719-CB1)
COBOL TRANSIENT LIBRARY (5719-CB2)
Series/1 Realtime Programming System COBOL provides customers
with a powerful, comprehensive, easy-to-use language for use in
preparation and execution of commercial and online data entry
application software. The language offers a wide range of commercial
features, plus extensive facilities for handling input and output, sorting
and merging data files, structuring the source and object programs, and
debugging COBOL programs. The Series/1 product also supports local
communication functions enabling users to accept data from and
display data to Series/1 interactive devices.
SERIES/1 EVENT DRIVEN EXECUTIVE
COBOL COMPILER and RESIDENT LIBRARY (5719-CB3)
COBOL TRANSIENT LIBRARY (5719-CB4)
IBM offers COBOL under the Series/1 Event Driven Executive Basic
Supervisor and Emulator (5719-XS1). The compiler and library can be
diskette- or disk-based as supported by the operating system. The
compiler requires as input a COBOL source program and produces
object modules which are combined by the Event Driven Executive
linkage editor into a Series/1 executable machine language program.
The language offers a wide range of commercial features, plus
extensive facilities for handling input and output, sorting and merging
data files, index capability for faster and simpler access to data files,
structuring the source and object programs, and trace facilities for
debugging COBOL programs. The Series/1 COBOL product also
supports local communication functions, enabling users to accept data
from and display data to Series/1 interactive devices.
SERIES/1 EVENT DRIVEN EXECUTIVE
COBOL COMPILER and RESIDENT LIBRARY VERSION 2
5719-CB5
COBOL TRANSIENT LIBRARY VERSION 2 (5719-CB6)
IBM offers COBOL Version 2 operating in the environment provided by
the Series/1 Event Driven Executive Basic Supervisor and Emulator
Version 3.1 (5719-XS3). The compiler and library can be diskette- or
disk-based as supported by the operating system. The compiler
requires as input a COBOL source program and produces object
modules which are combined by the Event Driven Executive linkage
editor into a Series/1 program. The language offers a wide range of
commercial features, plus extensive facilities for handling input and
output, sorting and merging data files, index capability for faster and
simpler access to data files, structuring the source and object programs,
and trace facilities for debugging COBOL programs. Series/1 COBOL
also supports local communication functions, enabling users to accept
data from and display data to Series/1 interactive devices.
---- --
- ------
= - - :§~§:
Do not reproduce without written permission
ISG
PRODUCT SUMMARY - SOFTWARE
SERIES/1 REALTIME PROGRAMMING SYSTEM
COBOL COMPILER and RESIDENT LIBRARY VERSION 2
5719-CB7
COBOL TRANSIENT LIBRARY VERSION 2 (5719-CB8)
Series/1 COBOL Version 2 operates in the environment provided by the
Series/1 Realtime Programming System (5719-PC5). The compiler and
library can be diskette- or disk-based as supported by the operating
system. The compiler requires as input a COBOL source program and
produces object modules which are combined by the Application
Builder into a Series/1 executable machine language program. The
language offers a wide range of commercial features, plus extensive
facilities for handling input and output, sorting and merging data files,
index capability for faster and simpler access to data files, structuring
the source and object programs, and trace facilities for debugging
COBOL programs. Series/1 COBOL also supports local communication
functions enabling users to accept data from and display data to
Series /1 interactive devices.
SERIES/1 EVENT DRIVEN EXECUTIVE
COMMUNICATIONS FACILITY
5719-CF1
The Series/1 Event Driven Executive Communications Facility program
is an enhancement to the existing Event Driven Executive Communications Facility - II FDP (5798-RDT), and contains all the functions
provided by the FDP plus additional support. The Communications
Facility: Manages communication between Series/1 s; between
Series/1s and other computers; and between Series/1s and various
input/ output devices ... Supports various devices and communication
links, and accommodates user-writter support for other devices ...
Manages user-supplied application programs ... Includes various aids to
assist programmers in writing interactive application programs ...
Includes various aids to assist the operator in defining and controlling
an interconnected environment consisting of Series/1 s, host computers, and devices ... Provides various means of maintaining the entire
network from a central site.
COMMUNICATIONS MONITOR FOR THE SERIES/1
5719-CM1
The Communications Monitor for the Series/1 manages communication
between a Series/1 and other Series/1s; between a Series/1 and other
computers; and between a Series/1 and various input/output devices.
It supports various devices and communication links, and accommodates user-written support for other devices and computers. It also
manages user-supplied application programs.
SERIES/1 REALTIME PROGRAMMING SYSTEM
COMMUNICATIONS MANAGER
VERSION 2 (5719-CM2)
The Series/1 Communications Manager (formerly named the Communications Monitor) significantly strengthens the communications
capabilities of the Series/1 by addressing front end processing,
distributing applications, and providing full networking functions with
major enhancements. The Remote Manager for management of
non-SNA networks from the SNA host using the host CNM products
will also be available. The Communications Manager supports the
Realtime Programming System Version 6 Multiprocessing feature which
provides horizontal growth, improved processing capability and system
availability through multiple processor configurations.
STRUCTURED PROGRAM FACILITY (SPF)
MVS/VTAM APPLICATION (5719-CR1)
The
tion
the
and
Series/1
program
Series/1
to attach
Structured Program Facility (SPF) MVS/VTAM applicaprovides the software necessary to service requests from
SPF program (5719-ED1) to read and write messages,
service tasks in the S/370.
STRUCTURED PROGRAM FACILITY (SPF)
MVS/TCAM APPLICATION (5719-CR2)
The
tion
the
and
Series/1
program
Series/1
to attach
PS S.22
Structured Program Facility (SPF) MVS!TCAM applicaprovides the software necessary to service requests from
SPF program (5719-ED1) to read and write messages,
service tasks in the S/370.
Aug 83
New
4987 PROGRAMMABLE COMMUNICATIONS
SUBSYSTEM PREPARATION FACILITY
5719-CSO
The Series/1 Programmable Communications Subsystem Preparation
Facility is a macro library that is used to support the generation of
controller storage image programs for the Series/1 Programmable
Communications Subsystem. This macro library is used with either the
Series/1 Base Program Preparation Facility (5719-PA1) or the Series/1
Program Preparation Subsystem Versions 1, 2, 3, and 4 (5719-AS1,
5719-AS2, 5719-AS3, and 5719-AS4).
4987 PROGRAMMABLE COMMUNICATIONS SUBSYSTEM
EXECUTION SUPPORT (5719-CS1)
The Series/1 4987 Programmable Communications Subsystem
Execution Support program runs under the control of the Realtime
Programming System Versions 2, 3 and 4, and provides support for the
4987 Programmable Communications Subsystem. The program
consists of a controller storage utility and macros that enhance the
EXIO commands in Realtime Programming System, Versions 2, 3 and 4,
for operating with a 4987.
4987 PROGRAMMABLE COMMUNICATIONS SUBSYSTEM
EXTENDED EXECUTION SUPPORT (5719-CS2)
The Series/1 4987 Programmable Communications Subsystem
Extended Execution Support program runs under the control of the
Series/1 Realtime Programming System Version 4 and provides
Read/Write level support as well as EXIO level support for the 4987.
EVENT DRIVEN EXECUTIVE (EDX)
SYSTEM/370 CHANNEL ATTACH (5719-CX1)
The Series/1 Event Driven Executive S/370 Channel Attach program
runs under the control of Version 3.0 of the EDX Basic Supervisor and
Emulator. This program, when used in conjunction with the 4993 mdl 1
Series/1-S/370 Termination Enclosure and the Series/1-S/370
Channel Attachment feature (#1200), provides the Series/1 user the
ability to communicate with a S/370 over a Selector or Block Multiplexer Channel. (Wherever S/370 is used, it refers to one of the
following processors: S/370 (mdls 135-168), the 3031,3032 and 3033
Processors, and the 4331 and 4341 Processors.)
STRUCTURED PROGRAMMING FACILITY (SPF)
5719-ED1
The Series/1 Structured Programming Facility provides a resident
programming editor in a Series/1, which communicates with a
companion application program in a S/370 MVS/VTAM or
MVS/TCAM system.
FORTRAN IV COMPILER AND
OBJECT SUPPORT LIBRARY (5719-F01)
FORTRAN IV REALTIME SUBROUTINE LIBRARY
5719-F03
FORTRAN IV REALTIME SUBROUTINE LIBRARY
VERSION 2 (5719-F04)
The Series/1 FORTRAN IV includes the compiler and execution time
routines for the Series/1 FORTRAN IV high-level language. Series/1
FORTRAN IV requires Mathematical Functional Subroutine Library, and
also requires the floating-point emulator feature of the Realtime
Programming System in those cases where the floating-point
instructions are used and the floating-point hardware feature is not
installed. The Realtime Subroutine Library is not a prerequisite of
Series/1 FORTRAN IV, but may be used by FORTRAN IV users to
facilitate access to sensor I/O and realtime functions. Source programs
written in Series/1 FORTRAN IV can be used for plant and laboratory
automation and process control application.
FORTRAN IV COMPILER AND
OBJECT SUPPORT LIBRARY VERSION 2
5719-F02
The Series/1 FORTRAN IV Compiler and Object Support Library,
Version 2 (5719-F02) is for use with the Series/1 Event Driven
Executive (EDX) Base Supervisor and Emulator (5719-XS1) and the
Realtime Programming System, Version 4 (5719-PC4). In addition, this
product, under the Realtime Programming System, provides support for
the 4969 Magnetic Tape Subsystem Support program.
-- --- ----
.=. =: :5~5: ISG
Do not reproduce without written permission
PS S.23
Aug 83
PRODUCT SUMMARY - SOFTWARE
7361 FASTDRAFT LICENSED PROGRAM
5719-GP1
This program supports the 7361 Fastdraft System. The 7361 Fastdraft
program supports the maximum 7361 Fastdraft System configuration.
This program is intended to satisfy requirements for general purpose
interactive drafting using 2D cartesian coordinates. It has been
developed for use by non-computer oriented drafters. The overall
purpose of the 7361 system and the Fastdraft software is to provide an
easy-to-Iearn and use system to enable drafters to improve drafting
productivity.
SERIES/1 REALTIME PROGRAMMING SYSTEM
X.25/HDLC COMMUNICATIONS SUPPORT
VERSION 1 (5719-HD1)
The Series/1 Realtime Programming System X.25/HDLC Communications Support extends the Series!1 Realtime Programming System
Version 6 to provide Read/Write-level X.25/HDLC support for the DLC
Adapter (RPQ 8T1067), the SDLC Single-Line Control (#2090), and the
Control/High-Speed
Synchronous
Communications
Single-Line
(#2080).
MATHEMATICAL and FUNCTIONAL SUBROUTINE
LIBRARY (MFSL) (5719-LM1)
New
EVENT DRIVEN EXECUTIVE (EDX) VERSION 1
MACRO LIBRARY --- 5719-LM5
UTILITIES --- 5719-UT3
BASIC SUPERVISOR AND EMULATOR --- 5719-XS1
PROGRAM PREPARATION FACILITY --- 5719-XX2
MACRO LIBRARY/HOST --- 5740-LM2
Version 1.1 of the following programs is available for the Series/1
Event Driven Executive: (1) EDX Macro Library (5719-LM5) A set of
macros which can be used to build a Basic Supervisor and Emulator and
to assemble application programs written in the Event Driven Executive
Language and/or Series/1 instruction set under the EDX Macro
Assembler (5719-ASA) ... (2) EDX Utilities (5719-UT3) A set of utility
programs that serve as productivity aids for application development
and installation ... (3) EDX Basic Supervisor and Emuiator (5719-XS1) A
multiprogramming system supervisor controlled by a user-oriented
instruction set.... (4)EDX Program Preparation Facility (5719-XX2) A
group of programs to compile and link-edit application programs
written in the Event Driven Executive language only. '" (5) EDX Macro
LIbrary /Host (5740-LM2) A set of macros which provide the capability
to assemble application programs written in the Event Driven Executive
language and/or Series/1 instruction set on a host System/370 in
conjunction with that system's program preparation facilities.
The Series/1 Mathematical and Function Subroutine Library is a set of
subroutines that aids in developing application programs. MFSL offers
the user of Series /1 a library of subroutines that meets a wide range of
requirements in the area of mathematical and data conversion
functions. All routines are reentrant.
EVENT DRIVEN EXECUTIVE (EDX) VERSION 2
MACRO LIBRARY ... 5719-LM6
UTILITIES ... 5719-UT4
BASIC SUPERVISOR and EMULATOR ... 5719-XS2
PROGRAM PREPARATION FACILITY ... 5719-XX3
MACRO LIBRARY/HOST ... 5719-LM3
MATHEMATICAL AND FUNCTIONAL SUBROUTINE
LIBRARY (MFSL) VERSION 2 (5719-LM2)
Version 2 of these programs provides all the facilities of the respective
Version 1 programs plus support for the 4969 Magnetic Tape Subsystem and the Remote Management Utility.
The Series/1 Mathematical and Functional Subroutine Library (MFSL)
Version 2 provides all the facilities of the Mathematical and Functional
Subroutine Library Version 1 (5719-LM1) plus commercial subroutines.
The commercial subroutines offer the users of Series/1 a library of
subroutines that will meet most requirements for decimal data handling.
The commercial subroutines provide comprehensive facilities for
editing, decimal arithmetic, data compaction, and conversion subroutines for data manipulation. These subroutines are similar to commercial
subroutine packages offered on other IBM systems. The commercial
subroutines are callable through Series/1 FORTRAN IV or the Macro
Assembler program provided with the Series/1 Program Preparation
Subsystem. The operating environment required for MFSL Version 2,
FORTRAN IV and Assembler is provided by the Series/1 Realtime
Programming System.
EVENT DRIVEN EXECUTIVE
MATHEMATICAL and FUNCTIONAL SUBROUTINE
LIBRARY (MFSL)
5719-LM3
Series/1 Event Drive Executive Mathematical and Functional Subroutine
Library is available for the Series/1 Event Driven Executive Basic
Supervisor and Emulator (5719-XS 1). The Event Driven Executive
Mathematical and Functional Subroutine Library (MFSL) is a set of
subroutines that aids in developing application programs, M FSL offers
the user of Series/l a library of subroutines that meets a wide range of
requirements in the area of mathematical and data conversion
functions. In addition, there are commercial subroutines which provide
comprehensive facilities for editing, decimal arithmetic, data compaction and conversion subroutines for data manipulation. The MFSL
subroutines are used with the Series/1 FORTRAN IV program
(5719-F02) on the Event Driven Executive Operating System. The
operating environment required for MFSL, FORTRAN IV and Program
Preparation Facility is provided by the Event Driven Executive Basic
Supervisor and Emulator (5719- XS 1).
EVENT DRIVEN EXECUTIVE (EDX) VERSION 3
MACRO LIBRARY ... 5719-LM6
UTILITIES ... 5719-UT4
BASIC SUPERVISOR and EMULATOR ... 5719-XS2
PROGRAM PREPARATION FACILITY ... 5719-XX3
MACRO LIBRARY/HOST ... 6719-LM3
Version 3 of these programs provides all the facilities of the respective
Version 2 programs plus support for the 4952 mdl C, 4954 and 4955
mdl F Processors, 4965 Diskette Drive, 4975 Printer mdls 1 L, 1R, 2L,
2R, 3101 Display Terminal Support enhancements, a new Spool facility,
a new Linkage Editor and other functional improvements.
SERIES/1 EVENT DRIVEN EXECUTIVE (EDX) VERSION 4
BASIC SUPERVISOR and EMULATOR ... 5719-XS4
PROGRAM PREPARATION FACILITY ... 5719-XX5
MACRO LIBRARY ... 5719-LM8
MACRO LIBRARY/HOST ... 5740-LM5
The Event Driven Executive System (EDX) has been enhanced to
provide the Series/1 users with improved performance, ease-of-use,
and support for larger application environments. The Event Driven
Executive System improvements in management of unmapped storage
may result in larger, faster application programs being implemented.
The restructuring of the supervisor of the Event Driven Executive
System such that supervisor modules may be loaded in other partitions
allows a large increase in the number of devices that EDX will support.
EVENT DRIVEN EXECUTIVE
MULTIPLE TERMINAL MANAGER VERSION 1
5719-MS1
The Series/1 Event Driven Executive Multiple Terminal Manager
Version 1 provides facilities designed to simplify the design and
implementation of transaction-oriented application programs written in
COBOL, FORTRAN, PL/I or Event Driven Language (EDL). These
applications execute in an interactive environment, where one or more
application programs run concurrently with one or more display devices.
Programs using predefined screen formats may be used for such
applications as order entry, inventory file update, and inquiry.
------- - - - -------_.-- ----- ISG
------
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
EVENT DRIVEN EXECUTIVE
MULTIPLE TERMINAL MANAGER VERSION 2
5719-MS2
The Series/1 Event Driven Executive (EDX) Multiple Terminal Manager
Version 2 operates under control of the Event Driven Executive Basic
Supervisor and Emulator Version 3.2 (5719-XS3). Version 2 includes all
functions and facilities contained in Version 1 and the following new
and enhanced capabilities: 3101 Display Terminal support, screen
support, utility functions, installation and tailoring aids and other
enhancements.
SERIES/1 REALTIME PROGRAMMING SYSTEM
MULTIPLE TERMINAL MANAGER VERSION 3
5719-MT1
The Series/1 Multiple Terminal Manager Version 3 program contains
changes to support the functions offered in the Series/1 Realtime
Programming System Version 6.
BASE PROGRAM PREPARATION FACILITIES
5719-PA1
The Series/1 Base Program Preparation Facilities is a set of standalone programs that aid in the preparation of programs for execution on
the Series/1. They consist of a Text Editor, a Macro Assembler, and a
Linkage Editor. Each program is loaded separately and executes
through prompts from the program with responses from the operator.
REALTIME PROGRAMMING SYSTEM VERSION 1
5719-PC1
The Series/1 Realtime Programming System provides operating system
functions for realtime operations with optional batch program
preparation. Realtime Programming System allows the generation of a
multi-partition system as well as smaller configurations in a consistent
and compatible manner. Realtime Programming System includes
multitasking facilities, storage management, data management, system
operator station support, timer support and communications facilities.
The Realtime Programming System supervisor, when combined with
the Program Preparation Subsystem, allows Series/1 to operate in a
realtime online preparation environment or, if realtime is not required, in
a simple batch environment.
REALTIME PROGRAMMING SYSTEM VERSION 2
5719-PC2
The Series/1 Realtime Programming System Version 2 provides all the
facilities of the Series/1 Realtime Programming System Version 1
(5719- PC1) plus additional features including: System support for the
4962 Disk Storage Unit mdls 3 and 4 ... storage Overlay improvements
... secondary storage (above 64K) assigned to partitions at SYSGEN
with optional I PL override ... support for up to 128K of physical storage.
REALTIME PROGRAMMING SYSTEM VERSION 3
5719-PC3
The Series/1 Realtime Programming System Version 3 provides all the
facilities of the Realtime Programming System Version 2 (5719-PC2)
plus the additional function to manage up to 256K bytes of processor
storage.
REALTIME PROGRAMMING SYSTEM VERSION 4
5719-PC4
The Series/1 Realtime Programming System Version 4 provides
operating system functions for realtime operations with either
multi-user online or batch program preparation. The Realtime
Programming System allows the generation of a multipartition system
as well as smaller configurations in a consistent and compatible
manner. The Realtime Programming System includes multitasking
facilities, storage management, data management, system operator
station support, timer support and communications facilities. The
Realtime Programming System supervisor, when combined with the
Program Preparation Subsystem, allows Series/1 to operate in a
realtime online preparation environment or, if realtime is not required, in
a simple batch environment.
PS S.24
Aug 83
New
REALTIME PROGRAMMING SYSTEM VERSION 5
5719-PC5
The Series/1 Realtime Programming System (also referred to as the
operating system) is a control system through which a user can install,
operate, and maintain system programs, application programs, and
data. It is a full function multiprogramming, multitasking, event-driven,
disk/diskette-based system. The operating system manages physical
resources - processor, storage, and devices. Its supervisor, data
management, and communications services are a controlled interface
between application programs and the Series/1 hardware. The
operating system supports the terminal-transaction environment and
supplies the environment for both realtime and batch applications.
REALTIME PROGRAMMING SYSTEM
VERSION 6 RELEASE 1 (5719-PC6)
The Series/1 Realtime Programming System has been enhanced to
provide the Series/1 user with improved performance, ease:"'of-use,
serviceability and data integrity.
REALTIME PROGRAMMING SYSTEM
PL/I COMPILER AND RESIDENT LIBRARY
VERSION 1 (5719-PL1)
PL/I TRANSIENT LIBRARY VERSION 1 (5719-PL3)
The Series/1 PL/I is a subset of American National Standard Programming Language PL/I (ANS X3.53 1976) plus additional language
functions to support coding realtime applications. The PL/I compiler
permits users to use the full capability of the hardware and operating
system functions. The language ,has full function language capabilities
that can be used for real time, scientific and commercial applications.
Series/1 PL/I is extremely useful in writing applications for plant and
laboratory automation, process control, report generation, problem
solution and sensor-based application.
REALTIME PROGRAMMING SYSTEM
PL/I COMPILER AND RESIDENT LIBRARY
VERSION 2 (5719-PL2)
PL/I TRANSIENT LIBRARY VERSION 2 (5719-PL4)
The Series/1 PL/I Version 2 is a subset of American National Standard
Programming Language PL/I (ANSI X3.53 - 1976) plus additional
language functions to support coding realtime applications. The PL/I
compiler permits users to use the full capability of the hardware and
operating system functions. The language has full function language
capabilities that can be used for realtime, scientific and commercial
applications. Series/1 PL/ I is extremely useful in writing interactive
applications for plant and laboratory automation, process control, report
generation, problem solution and sensor-based applications.
EVENT DRIVEN EXECUTIVE
PL/I COMPILER and RESIDENT LIBRARY (5719-PL5)
PL/I TRANSIENT LIBRARY (5719-PL6)
These products are programs working under the Event Driven Executive
Basic Supervisor and Emulator Versions 1.1 or 2. The Series/1 Event
Driven Executive PL/I is a subset of American National Standards
Institute Programming Language PL/I (ANSI X3.53 1976), as understood and interpreted by IBM as of July 1979, plus additional language
functions to support coding multitasking applications. The PL/I
compiler permits users to use the functional capability of the operating
system for commercial, scientific and interactive applications.
EVENT DRIVEN EXECUTIVE
ADVANCED REMOTE JOB ENTRY (ARJE)
VERSION 1 (5719-RJ1)
The Series/1 Event Driven Executive Advanced Remote Job Entry
program provides remote job entry workstation support for the Series/1
user with RJE support in an SNA network or BSC environment.
SERIES/1 REALTIME PROGRAMMING SYSTEM
ADVANCED REMOTE JOB ENTRY (ARJE)
5719-RJ6
The Series/1 Realtime Programming System Advanced Remote Job
Entry program executes as an application program on the Realtime
Programming System (RPS). The ARJE program supports the use of a
Series/1 as a remote job entry workstation using either Systems
Network Architecture (SNA) or Multileaving Binary Synchronous
Communications (BSC).
-------- - ----- ----
Do not reproduce without written permission
.=.=-==';"= ISG
PS 5.25
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
SERIES/1 EVENT DRIVEN EXECUTIVE
REMOTE MANAGER
5719-RM1
EVENT DRIVEN EXECUTIVE
SYSTEMS NETWORK ARCHITECTURE (SNA)
5719-SX1
The Series/1 Event Driven Executive Remote Manager enables the
Series/1 to participate in the Communications Network Management
(CNM) environment. The Remote Manager will interface to existing
host IBM CNM programs to provide the Series/1 with central network
management.
The Series/1 Event Driven Executive support for Systems Network
Architecture (SNA) program executes as a separate program within the
Event Driven Executive system. A single copy of the SNA program will
execute and coordinate all SNA session traffic from user application
programs to a single host subsystem (lMS/VS, CICS/VS). The Event
Driven Executive processing system will now be able to attach to
existin~ SNA host system (S/370, 303X, 43XX) networks to permit
Series/1 Event Driven Executive users to communicate with already
existing host application subsystems such as the Customer Information
Control System (CICS/VS) and Information Management System
(lMS/VS). The Series/1 will attach to an SNA host system as a cluster
controller node. The Series/1 node attaches to an adjacent 370X
Network Control Program (NCP) Communications Controller that is
either locally or remotely attached to the host system. The physical
interconnection is linked by means of Synchronous Data Link Control
(SDLC).
SERIES/1 REALTIME PROGRAMMING SYSTEM
REMOTE MANAGER
5719-RM6
The Series/1 Remote Manager enables the Series/1 to participate in
the Communications Network Management (CNM) environment. The
Remote Manager will interface to existing host IBM CNM programs to
provide the Series/1 with central network management.
STAND-ALONE DISK UTILITIES
5719-SC2
This Series/1 program provides the following: Diskette IPL Bootstrap .. ,
DISK IPL Bootstrap/Loader ... Diskette and Disk initialization ... Create
Diskette HDR1 ... Delete Diskette HDR1 ... Diskette to Disk copy ...
Disk to Diskette copy ... Diskette or Disk to Printer dump '" Operator
Station to Disk or Diskette patch ... Stand-alone Storage to Diskette or
Printer dump ... Automatic System Build ... System Verification ... Error
logging facilities.
REALTIME PROGRAMMING SYSTEM
SCREEN FORMAT DESIGN AID UTILITY (5719-SF1)
PRESENTATION SUPPORT (5719-SF2)
EVENT DRIVEN EXECUTIVE
SYSTEMS NETWORK ARCHITECTURE RJE
5719-SX2
The Series/1 Event Driven Executive (EDX) Systems Network
Architecture RJE support (SNA RJE) program has the commands and
capabilities of the existing EDX RJE Utilities plus additional functions
which accommodate SNA host job entry subsystems. The RJE
program will execute as a separate program within the Event Driven
Executive system.
5250 INFORMATION DISPLAY SYSTEM
ATTACHMENT SUPPORT
5719-TA1
Used in conjunction with Version 4 of the Series/1 Realtime Programming System (5719-PC4), the Screen Format Design Aid Utility
(5719-SF1) and Presentation Support (5719-SF2) provide the user with
definition and execution-time facilities for the creation, maintenance,
and usage of screen formats for 4978, 4979, and 5250 Display Stations
attached to the Series /1.
The Series/1 5250 Information Display System Attachment Support
program provides definition and execution time facilities to assist the
user in the control of 5250 Information Display System work stations
attached to the Series/1 5250 Information Display System Attachment.
REALTIME PROGRAMMING SYSTEM SORT/MERGE
5719-SM1
4969 MAGNETIC TAPE SUBSYSTEM SUPPORT
5719-TA4
The Series/1 Realtime Programming System Sort/Merge program
handles the sorting and merging of records from up to eight input data
sets into one output data set in either ascending or descending order.
The user specifies one or more control fields in the records to be
sorted; the program then compares the control fields to determine the
relative sequence of the records.
The Series/1 4969 Magnetic Tape Subsystem Support program
provides support for the 4969 Magnetic Tape Subsystem when
attached to the Series/1.
EVENT DRIVEN EXECUTIVE SORT/MERGE
5719-SM2
The Series/1 Event Driven Executive Sort/Merge program handles the
sorting and merging of records from up to eight input data sets into one
output data set in either ascending or descending order. The user
specifies one or more control fields in the records to be sorted. The
program then compares the control fields to determine the relative
sequence of the records. The Event Driven Executive Sort/Merge
program executes with the Event Driven Executive Basic Supervisor and
Emulator (5719-XS1). It can be invoked by the user through the $L
command, the LOAD instruction, or the $JOBUTIL utility of the Event
Driven Executive Utilities (5719-UT3). Sort or merge records can have
any of the data set organizations that are part of the Series/1 Event
Driven Executive Basic Supervisor and Emulator. This includes
consecutive and indexed data set organizations.
REALTIME PROGRAMMING SYSTEM VERSION 5
SNA EXTENDED SUPPORT (5719-SN1)
The Series/1 Realtime Programming System Version 5 SNA Extended
Support program enhances the overall usability of the base operating
system Systems Network Architecture (SNA) support.
FACILITY CONTROL/POWER MANAGEMENT 1
FC/PM 1 (5719-U11)
Series/1 Facility Control/Power Management 1 program is a standalone dedicated application providing control actions for reducing both
electrical demand and consumption charges. It requires no local
programming and is controlled through the entry of functional
commands and appropriate parameters by the user.
FACILITY CONTROL/POWER MANAGEMENT 2
FC/PM 2 (5719-U12)
Series/1 Facility Control/Power Management 2 program is a standalone dedicated application providing control actions for reducing both
electrical demand and consumption charges. It requires no local
programming in order to execute the included application functions, but
permits user programming modification of those functions or development of additional functions if desired. The FC / PM 2 functions include
the functions supplied in FC / PM 1 with extended support for up 95
device circuits, plus utilities useful for function modification or new
function addition. In addition, a number of new features such as the
operations monitor and the Billin9 Period Report have been added. A
special feature, Facility Control/Power Management 3, extends the
range of IBM-provided application functions to include digital device
addressing for up to 256 device circuits, enthalpy control of air
dampers, temperature proportional control strategies, and extended
condition switch function. Application functions of both FC / PM 2 and
FC/PM 3 are controlled through the entry of functional commands and
appropriate parameters by the user.
- ---------
..:. =::: :5~E: ISG
Do not reproduce without written permission
PS S.26
Aug 83
PRODUCT SUMMARY - SOFTWARE
FACILITY CONTROL/POWER MANAGEMENT 3
PC/PM 3 FEATURES #6000, #6001
5719-U12
Series/1 Facility Control/Power Management 3 is a special feature of
Facility Control/Power Management 2 and may be installed on Facility
Control/Power Management 2M programs operating on Series/1. It
extends the range of functions supplied by IBM with the base product
to include: Digital Device Addressing ... Enthalpy Control of Air
Dampers ... Temperature Proportional Control Strategies ... Extended
Condition Switch Action. This special feature provides the user with the
opportunity to further capitalize on the potential of computerized energy
control through additional manpower and energy savings.
FACILITY CONTROL/POWER MANAGEMENT 4
FC/PM 4 (5719-U13)
Series/1 Facility Control/Power Management 4 program is a standalone application providing control actions to help in reducing both
electrical demand and consumption charges for facilities with multiple
demand and consumption meters. It requires no local programming in
order to execute the included application functions, but permits user
programming of modifications of certain application functions, or
development of additional functions if desired, for example, a userwritten program to support a hardware communications subsystem
which interfaces to the Series/1 through 01/00 (#1560). The included
functions are equivalent to those provided in FC/PM 2 with extended
support for up to 8 meter sites, up to 128 monitoring points, and up to
158 device circuits, plus utilities useful for function modification or new
function addition. Application functions of FC/PM 4 are controlled
through the entry of functional commands and appropriate parameters
by the user. Application Program Preparation Utilities are included with
FC/PM 4.
New
--- ------!. - - :§~5: ISG
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
SERIES/1 FACILITY CONTROL/POWER
MANAGEMENT 2M (FC/FM 2M)
5719-U14
Series/1 Facility Control/Power Management 2M operating on a
Series/1 is a stand-alone dedicated application providing control
actions to help in reducing both electrical demand and consumption
charges. It requires no local programming in order to execute the
included application functions, but permits user programming
modification of those functions or development of additional functions
if desired via the FC/PM 2 Application Program Preparation Utilities.
The included functions are equivalent to those provided in FC/PM 2.
Although the Application Program Preparation Utilities are not included
with FC/PM 2M, optional source code will be available for function
modification or new function addition. A special feature, Facility
Control/Power Management 3, extends the range of IBM-provided
application functions to include digital device addressing for up to 256
device circuits, enthalpy control of air dampers, temperature proportional control strategies, and extended condition switch function.
Application functions of both FC / PM 2M and FC / PM 3 are controlled
through the entry of functional commands and appropriate parameters
by the user. FC/PM 3, along with modifiability, opens a growth path
for further savings not available to the FC / PM 1 user.
SERIES/1 FACILITY CONTROL/POWER MANAGEMENT 3
PC/PM 3 SPECIAL FEATURES #6000, #6001
5719-U14
Series/1 Facility Control/Power Management 3 is a special feature of
Facility Control/Power Management 2 and may be installed on Facility
Control/Power Management 2M operating on Series/1. It extends the
range of functions supplied by IBM with the base product to include:
Digital Device Addressing ... Enthalpy Control of Air Dampers ...
Temperature Proportional Control Strategies ... Extended Condition
Switch Action. This opportunity to further capitalize on the potential of
computerized energy control through additional manpower and energy
savings.
SERIES/1 FACILITY CONTROL/POWER
MANAGEMENT 4M (FC/PM 4M)
5719-U15
Series/1 Facility Control/Power Management 4M is a stand-alone
application providing control actions to help in reducing both electrical
demand and consumption charges for facilities with multiple demand
and consumption meters. It requires no local programming in order to
execute the included application functions, but permits user programming of modifications of certain application functions, or development
of additional functions if desired, via the FC/PM 4 Application Program
Preparation Utilities, for example, a user-written program to support a
hardware communications subsystem which interfaces to the Series/1
through DI/DO (#1560). The included functions are equivalent to those
provided in FC/PM 4. Although the Application Program Preparation
Utilities are not included with FC / PM 4M, optional source code will be
available for function modification or new function addition. Application
functions of FC/PM 4M are controlled through the entry of functional
commands and appropriate parameters by the user.
SERIES/1 AUDIO DISTRIBUTION SYSTEM
VERSION 1
5719-U20
The Series/1 Audio Distribution System, a Series/1-based voice
store-and-forward message system, is intended for direct support of a
network of business principals, such as managers, professionals, sales
personnel, and other key operating personnel in their daily communications activities. Users or subscribers interact with the Audio Distribution System through conventional tone-generating telephones. Users
access the primary functions Get (*G), Listen (*L), Record (*R). Transmit
(*T) and Customize (*C) by means of the telephone keypad. The
subscribers can record their own voice messages. These message are
digitized and stored on a disk for listening by one or more other
subscribers as designated by the originating subscriber. A subscriber
can listen to a message sent by another subscriber, and then either
reply directly to the message, or send it to one or more additional
subscribers. A HELP function may also be invoked at any time to assist
the subscriber.
SERIES/1 EVENT DRIVEN EXECUTIVE QUERY
5719-XR1
The Series/1 Event Driven Executive Query provides an access to
user's operating data stored in an Indexed Access Method file or a
sequential file. This program is for use with Event Driven Executive
Multiple Terminal Manager program 5719-MS2. This program can also
be used as in a batch processing mode by an application program.
PS S.27
Aug 83
New
SERIES/1 REALTIME PROGRAMMING SYSTEM QUERY
5719-XR2
The Series/1 Realtime Programming System Query provides an access
to user's operating data stored in an Indexed Access Method file or a
sequential file. This program is for use with Realtime Programming
System Multiple Terminal Manager program (5719-MT1), and can also
be used in a batch processing mode by an application program.
5110 PRINT PLOT/PROBLEM SOLVER LIBRARY
5721-DC3 (BASIC) and 5721-DC4 (APL)
5110 Print Plot/Problem Solver Library is an interactive program. When
used in conjunction with the printer control function support provided it
allows the 5110 to plot data generated by BASIC or APL programs, or
to plot data entered from the keyboard onto a 5103 Printer. (Note: All
further references to the Print Plot/ Problem Solver Library assume the
printer control function support is that provided with the Print Plot
program and not the RPQ.) In addition, the Print Plot/Problem Solver
Library, through the use of the Serial I/O Adapter, can be used with
these types of peripheral devices: Absolute Vector Plotters ... Storage
Display Terminals.
5110 BUSINESS ANALYSIS/PROBLEM SOLVER LIBRARY
5721-DC5
This 5110 program contains a comprehensive set of interactive routines
for use on the system. It consists of 30 routines written in the BASIC
language. It provides the problem solver with procedures for data
generation and maintenance, spread sheet analysis, investment
analysis, break-even or cost-volume profit analysis, depreciation
analysis and time series analysis. The program is designed so that a
detailed knowledge of programming is not required.
5110 MATH/PROBLEM SOLVER LIBRARY (BASIC)
5721-DC6
5110 MATH / Problem Solver Library is a set of interactive programs for
the solution of frequently encountered mathematical problems in
science and industry.· The library is available in BASIC only for the
5110. The conversational mode of operation of MATH/Problem Solver
Library allows a non-data processing-oriented user to use the library
with a minimum of effort.
5110 STAT/PROBLEM SOLVER LIBRARY (BASIC)
5721-DC7
The 5110 STAT/Problem Solver Library is an interactive program
encompassing commonly used statistical techniques for the analysis of
numerical data. The library is available in BASIC only for the 5110.
STAT /Problem Solver Library helps the problem solver to utilize the
computer directly for statistical analysis. A statistically-oriented user
should have no difficulty in quickly learning the capabilities of the
programs. The interactive mode of the package allows a non-data
processing-oriented professional to readily utilize the programs.
Because of the interactive nature of the STAT/Problem Solver Library
the user can sit at the keyboard and see the result of the analysis as it is
developed. Delays and some of the sources of error associated with
batch processing and time sharing usage are eliminated.
5120 ACCOUNTING APPLICATIONS
5120 BILLING ... (5721-XB1)
5120 PAYROLL ... (5721-XB2)
5120 ACCOUNTS PAYABLE ... (5721-XB3)
5120 ACCOUNTS RECEIVABLE ... (5721-XB4)
5120 INVENTORY REPORTING ... (5721-XB5)
5120 GENERAL LEDGER ... (5721-XB6)
The 5120 Computing System programs for accounting applications are
cross-industry programs, applicable to many different business types,
which provide the user with powerful tools for running and managing a
business. The levels of support provided for these programs include:
Documentation designed to increase ease-of-use and productivity; an
Installation Support Center (lSC) Hotline available to all customers for
assistance; Responsive Program Temporary Fix (PTF) - an enhancement to the distribution and applying of program fixes; and Automated
Instructional Marketing (AIM) - a powerful new aid for marketing and
demonstration.
-- - ---------------- _ . - ISG
--
PS S.28
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
SYSTEM/32 BASIC ASSEMBLER LANGUAGE
and MACRO PROCESSOR
5725-AS1
The Basic Assembler language is a symbolic programming lar:guaQe
used to write programs for the System/32. Source programs written In
this language are processed by the Basic Assembler program to
produce relocatable object programs which are converted to executable
format by the System/32 System Control Programming-Overlay
Linkage Editor facility. The Basic Assembler can be used to create a
stand-alone program. The object programs are stored in the
System/32 Library. Program loading is performed through System/32
OCL. Programs may be coded entirely by the user with no dependence
on any other programming other than System/32 System Control
Programming (5725-SC1). Basic Assembler may also be used for
assembly of relocatable subroutines for use with System/32 RPG II.
The subroutines written in the Basic Assembler language are coded by
the user and separately assembled. The process of program linking is
accomplished during compilation of the RPG II source program.
New
SYSTEM/32 FOOD DISTRIBUTORS
MANAGEMENT ACCOUNTING SYSTEM
BI LLI NG .. , 5725-D6A
ACCOUNTS RECEIVABLE ... 5725-D66
INVENTORY CONTROL ... 5725-068
SALES ANALYSIS ... 5725-D6C
These modular applications are available for either a 16K or 24K
System/32. The application function and data base are exactly the
same. Performance improvements in the larger memory size versions
for each system come from the reduction of overlays, incorporation of
larger blocking factors, and use of dual I/O area. Whe~ a.1l four
applications are installed, they constitute an Interrelated applicatl?n set
with an integrated data base. They can help users manage_their two
largest business assets, accounts receivable and inventory, and give
them profit performance data on their products, c~stomer~,. and
salesmen. They can also help the user increase operational efficiency
and customer service.
SYSTEM/32 CLIENT ACCOUNTING and
FINANCIAL REPORTING SYSTEM (CAFRS)
5725-C21
SYSTEM/32 DISTRIBUTION
FINANCIAL ACCOUNTING SYSTEM (DFAS)
The System/32 Client Accounting and Financial Reporting System
offers the public accounting profession a comprehensive aid to solving
the problems of client accounting. It assists .the Cert.ified Public
Accountant, Public Accountant. or bookkeeper In operating a more
profitable and productive practice.
GENERAL LEDGER .. , 5725-061
ACCOUNTS PAYABLE ... 5725-062
SYSTEM/32 LUMBER DEALERS
MANAGEMENT ACCOUNTING SYSTEM (LOMAS)
BILLING ... 5725-D4F
ACCOUNTS RECEIVABLE ... 5725-D4B
INVENTORY CONTROL ... 5725-040
SALES ANALYSIS ... 5725-049
These modular applications are available for either a 16K or 24K
System/32. The application function and data base are exactly the
same. Performance improvements in the larger memory size versions
for each system come from the reduction of overlays, incorporation of
larger blocking factors, and use of dual I/O areas. When all four
applications are installed they constitute an interrelated application set
with an integrated data base. They can help users manage their two
largest business assets, accounts receivable and inventory, and give
them profit performance data on their products, customers, and
salesmen. They can also help the user increase operational efficiency
and customer service. The Payroll, Accounts Payable, and General
Ledger programs of the Distribution Financial Accounting System
(DFAS) can co-reside with the Lumber Dealers Management Accounting System.
SYSTEM/32 DISTRIBUTORS MANAGEMENT
ACCOUNTING SYSTEM (DMAS)
BILLING ... 5725-041
ACCOUNTS RECEIVABLE ... 5725-043
INVENTORY CONTROL ... 5725-045
SALES ANALYSIS ... 5725-047
These modular applications are available for either a 16K or 24K
System/32. The application function and data base are exactly the
same. Performance improvements in the larger memory size versions
for each system come from the reduction of overlays, incorporation of
larger blocking factors, and use of dual I/O areas. When all four
applications are installed they constitute an interrelated application set
with an integrated data base. They can help users manage their two
largest business assets, accounts receivable and inventory, and give
them profit performance data on their products, customers, and
salesmen. They can also help the user increase operational efficiency
and customer service. The open order file, warehouse sequenced
picking lists and automated pricing and discounting methods can help
improve order processing speed and accuracy. The inventory control
system provides information to the buyer that will help optimize
inventory investment through identification of the obsolete, slow
moving, and unprofitable items; and help increase inventory turns and
service levels. Automatic credit limit checking, variable credit terms,
late charges on open item and balance forward accounts, delinquency
notices, and aged receivables reports provide tools for reducing bad
debt losses and increasing cash flow. Daily, monthly, and on-demand
sales reports help monitor the attainment of the distributor's sales
objectives. The Payroll, Accounts Payable, and General Ledger
programs of the Distribution Financial Accounting System (DFAS) can
co-reside with the DMAS programs.
PAYROLL ... 5725-063
These three applications provide distributors with a powerful aid in
managing their business.
SYSTEM/ 32 STUDENt RECORDS (5725-E31),
STUDENT ACCOUNTING (5725-E32),
STUDENT SCHEDULING (5725-E33)
Each program offers opportunities for new name and first sxsten:'s
account sales in small school districts. These applications are primarily
intended for small school districts, or large secondary schools. The
Student Records lAP, which provides the data base and file maintenance functions, is a prerequisite for either or both of the other
packages. These three applications pr<:,vide the. school with a powerful
aid in managing its student record keeping functions.
SYSTEM/32 FORTRAN IV
5725-F01
System/32 FORTRAN IV processes programs written in the System/32'
FORTRAN IV language, producing output suitable for execution with the
System/32 System Control Programming (5725-SC1).
SYSTEM/32 FINANCIAL INSTITUTIONS
CUSTOMER ACCOUNTING SYSTEM
CUSTOMER INFORMATION FILE (CIF) ... 5725-F11
DEMAND DEPOSIT ACCOUNTING ... 5725-F12
SAVINGS ACCOUNTING ... 5725-F13
INSTALLMENT LOAN ACCOUNTING ... 5725-F14
The Customer Information File lAP (CIF) includes the data base, the
application conversion procedures, and the file maintenance procedures
for the system. It is a prerequisite for the Demand. Deposit Acc?unting,
Savings Accounting and Installment Loan Accounting I~P~, which rr:ay
be installed independently of each other. The applications provide
broad application support for the small commercial bank. The
Customer Information File lAP enables the bank to associate all of a
customer's checking, savings, and installment loan accounts with a
single record that contains common information about the customer
and the customer's relationship to the bank. This enables the bank to
make decisions based on a broader knowledge of the status of the
customer's accounts. Account and customer information is accessed
by account number for daily transaction processing, and by customer
name for management reports, inquiries, etc. The Demand. Deposit
Accounting, Savings Accounting and Installment Loan Accounting lAPs
support the three most important data pro~essing ?pplications .in a
commercial bank. Each of these lAPs contains a variety of functional
options, enabling the bank to tailor the application to its own requirements.
---------- ---
= ::-:. :§~~ ISG
PS S.29
Do not reproduce without written permission
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/32 HOSPITAL FINANCIAL
MANAGEMENT SYSTEM (HFMS)
PATIENT BILLING ... 5725-H11
ACCOUNTS RECEIVABLE ... 5725-H12
PAYROLL ... 5725-H13
GENERAL LEDGER/ACCOUNTS PAYABLE ... 5725-H14
The Hospital Financial Management System offers the small hospital a
disk data-based system comprised of a series of programs and
procedures that perform the accounting, management reporting and
statistical functions for patient billing, accounts receivable, payroll and
general ledger/accounts payable.
SYSTEM/32 MEDICAL GROUP MANAGEMENT SYSTEM
5725-H15
The application provides the medical group with a powerful aid in
managing its business. The Medical Group Management system is
primarily intended for a group of up to 20 doctors using a single
accounting system. Key accounting and management reports are
provided to allow selling and installing without a requirement for
services or customer programming capabilities.
SYSTEM/32 MEMBERSHIP and MAILING LIST SYSTEM
5725-K11
Associations are constituted to serve their memberships. Their prime
functions are information retrieval and dissemination, establishment of
standards and ethics, research, and representing their members to
external agencies. Items of general interest are disseminated through
association publications sent through the postal service. However, the
need often exists to make specialized mailings to selected members
with specific characteristics. Information exchange also takes place at
events sponsored by associations. Associations, then, have data
processing needs characterized by large data bases which must be
processed in total but with the ability to process individual records or
groups of records on a selective or exception basis. The Membership
and Mailing List System is designed for associations of up to approximately 15,000 members if optional files are not used.
SYSTEM/32 5230 DATA COLLECTION
SYSTEM SUPPORT
5725-M3A
The System/32 5230 Data Collection System Support program
provides the manufacturer with a convenient, practical means of
preparing shop floor data for processing by the System/32 Manufacturing Management Accounting System (MMAS) application programs.
Data collected by the 5230 Data Collection System is edited, consolidated, and formatted for processing by the MMAS Payroll, Inventory
Management, and Production Status and Costing lAPs or for userwritten manufacturing management systems (with appropriate changes
to the output modules). This lAP offers current System/32 MMAS
account upgrading in the manufacturing industry. It is primarily
intended for the manufacturer with 50 to 250 employees.
SYSTEM/32 MANUFACTURING MANAGEMENT
ACCOUNTING SYSTEM (MMAS)
PRODUCTION STATUS AND COSTING ... 5725-M31
PAYROLL ... 5725-M32
ACCOUNTS PAYABLE ... 5725-M33
ACCOUNTS RECEIVABLE ... 5725-M34
INVENTORY MANAGEMENT ... 5725-M35
PRODUCT DEFINITION AND COSTING ... 5725-M36
GENERAL LEDGER ... 5725-M37
SALES ANALYSIS ... 5725-M38
ORDER ENTRY AND INVOICING ... 5725-M39
The System/32 Manufacturing Management Accounting System
(MMAS) provides manufacturers with a powerful aid in managing the
business. MMAS offers flexible applications specifically designed for
the manufacturing industry. M MAS provides key reports to help
management direct and control their business effectively. MMAS
offers opportunities for new name and first systems account sales in
the manufacturing industry. It is primarily intended for the manufacturer
with 20 to 250 employees.
SYSTEM/32 SHIPPING CONTROL for
SUPPLIERS to the AUTOMOTIVE INDUSTRY
5725-M44
System/32 Shipping Control for Suppliers to the Automotive Industry
provides solutions for many problems associated with planning,
controlling and reporting shipping dock transactions for the automotive
supplier. Shipping Control for Suppliers to the Automotive Industry
addresses the requirements for both release orders and discrete
quantity orders by generating a wide variety of planning reports,
shipping documentation and reporting of completed shipping transactions, which assists suppliers in effectively managing and controlling
their shipping operations.
SYSTEM/32 RELEASE CONTROL for
SUPPLIERS to the AUTOMOTIVE INDUSTRY
5725-M45
System/32 Release Control for Suppliers to the Automotive Industry
provides the automotive parts suppliers with solutions to many
problems associated with processing and maintaining release orders
from the major automotive manufacturers.
SYSTEM/32 CONSTRUCTION MANAGEMENT
ACCOUNTING SYSTEM (CMAS)
JOB COSTING ... 5725-M61
ACCOUNTS PAYABLE ... 5725-M62
PAYROLL ... 5725-M63
GENERAL LEDGER ... 5725-M64
The System/32 Construction Management Accounting System (CMAS)
provides the construction industry with a complete, yet flexible method
for managing their Payroll, Accounts Payable, Job Costing, and General
Ledger.
SYSTEM/32 RPG II
5725-RG1
System/32 RPG II provides the following capabilities: RPG II Language
Level... System/32 Device Support ... AlIto- Report ... Binary
Synchronous Communications (BS(;).
SYSTEM/32 SYSTEM CONTROL PROGRAMMING
5725-SC1
System/32 System Control Programming provides these major
capabilities: Operation Control Language ... System Utilities .. , Data
Management ... System History Area ... 2K SCP Main Storage
Requirement ... Rollout/Rollin Inquiry ... Overlay Linkage Editor ...
System/32 Macros ... Job Stream Support ... 1255 MICR Device
Support ... Synchronous Data Link Control (SDLC) as a part of the
Systems Network Architecture (SNA) .. , Binary Synchronous Communications (BSC) ... Word Processing Feature.
SYSTEM/32 MOTOR FREIGHT
ACCOUNTING SYSTEM (MFAS)
5725-T21
This application provides small- to medium-size general commodity or
specialty motor freight carriers with a powerful aid in managing their
business. The MFAS Revenue Accounting lAP offers conventional
revenue accounting functions to the small and medium size general
commodity and specialty carrier in the motor freight industry. These
functions are divided into the five categories of (1) Freight Bill Entry and
Daily Reports, (2) Accounts Receivable, (3) Interline Payables, (4)
Shipment Analysis, and (5) Owner / Operator Accounting.
SYSTEM/32 UTILITIES
5725-UT1
The following utilities are provided: Data File Utility (DFU) '" Sort .. ,
Source Entry Utility (SEU). The following data base management
functions are provided as part of DFU: ... Data File Creation and
Maintenance ... Data File Inquiry ... Data File List.
SYSTEM/32 FILE CONVERSION UTILITY (FCU)
5725-UT2
The File Conversion Utility (FCU) is a stand-alone System/32 utility
accepting input from and providing output to 5321 Magnetic Card Unit
or fixed disk (Link Direct Access Method, sequential, direct or indexed
sequential file organization).
------- -------.:.::::
ISG
:5~5:
PS S.30
Do not reproduce without written permission
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/32 STATISTICAL SYSTEM
5725-XA1
SYSTEM/34 BASIC
5726-BA1
The System/32 Statistical System is a set of routines offered for use by
Problem Solvers to satisfy their needs in statistical data analysis. This
program is a set of four major tools: Stepwise Linear Regression
Analysis, Factor Analysis, Analysis of Variance, and Orthogonal
Polynomial Curve Fitting.
BASIC (Beginners All-purpose Symbolic Instruction Code) is a
high-level interactive language for users who have commercial data
processing requirements or who need to solve business, technical, and
scientific problems. System/34 BASIC is designed to be easy-tolearn, easy-to-use, and easy-to-remember, enabling the programmer
or casual user to concentrate on the application aspects of the
programming task. The System/34 BASIC implementation uses a
design such that code not executed does not take up main storage, and
program size is not limited to region size. System/34 BASIC has the
ease-of-use characteristics of an interactive interpreter, and yet offers
some of the performance advantages of a compiler. System/34 BASIC
is designed in accordance with the American National Standard Minimal
BASIC (X3.60-1978) as understood and interpreted by IBM as of
September 1979.
SYSTEM/32 RETAIL DATA PREPARATION
5725-XA2
The System/32 Retail Data Preparation program is designed to satisfy
the basic functional requirements of retailers. It is available for a
System/32 with 32K. It provides flexible, ready-to-execute programs
specifically designed for processing transaction log data produced on
5265 Point-of-Sale Terminals.
SYSTEM/32 SUBROUTINE LIBRARY - MATHEMATICS
SL-MATH (5725-XM1)
The Subroutine Library - Mathematics (SL-MATH) is a set of basic
computational subroutines for the solution of mathematical problems.
It includes a wide variety of subroutines, but is not exhaustive in terms
of either functions performed or methods used. It provides powerful
tools for the solution of many problems in industry, science, and
engineering. The subroutines, which are designed as computational
building blocks, operate on data that resides in main storage. Included
are three subroutines dealing with optimization. The solution of a
standard linear programming problem by (1) the revised simplex method
with bounds and ranges and (2) the revised dual simplex method is
provided. The third optimization subroutine provides for the solution of
a capacitated network flow problem (generalized transportation
problem). Sample programs will be provided for two of the optimization subroutines.
SYSTEM/32 WORD PROCESSOR/32
WP /32 (5725-XX1)
The Word Processor/32 program provides a set of office-related word
processing functions to process text information from a keyboard, store
it in document form, and operate on and print this information in a
batch mode.
SYSTEM/32 LETTER WRITING APPLICATION
5725-XX2
The System/32 Letter Writing Application program provides the
System/32 user with the additional data processing capability of
printing personalized letters for large volume distribution. The Letter
Writing Application program is directed toward the user with a
System/32 installed or on-order, whose primary volume letter
generation or response is nonexistent or presently done by means of
preprinted forms or flyers.
SYSTEM/32 JOB ANALYSIS SYSTEM (JAS/32)
5725-XX3
SYSTEM/34 BUSINESS REPORT/APPLICATION
DEVELOPMENT SYSTEM (SYSTEM/34 BRADS)
5726-BR1
System/34 Business Report/Application Development System brings
data base power to users of the System/34. Using BRADS, users can
productively develop and install system-justifying applications, often
without becoming or hiring programmers. Users can also expand the
value of applications which run on their IBM System/34 by querying
the data bases and by developing new reports.
SYSTEM/34 COBOL COMPILER AND LIBRARY
5726-CB1
System/34 1974-level COBOL operates under control of the
System/34 System Support Program (5726-SS1). The compiler and
library are disk resident. The compiler requires as input a COBOL
source language program and produces as output, by means of the
system's Overlay Linkage Editor, a System/34 machine language object
program cataloged in an object library. A source program listing,
diagnostic messages, and main storage map can also be requested.
This compiler is designed according to the 1974 standard, which makes
it more compatible with other COBOL compilers. The high level of
function makes it more valuable to users who wish to do the major
development of application programs centrally and then distribute the
source code for final development and testing to a System/34.
SYSTEM/34 CLIENT ACCOUNTING and
FINANCIAL REPORTING SYSTEM
CAFRS (5726-C21)
The System/34 Client Accounting and Financial Reporting System
offers the public accounting profession a comprehensive aid to solving
the problems of client accounting. It assists the certified public
accountant public accountant, or bookkeeper in operating a more
profitable and productive practice.
SYSTEM/34 CLIENT ACCOUNTING and
FINANCIAL REPORTING SYSTEM (CAFRS II)
5726-C22
The System/32 Job Analysis System (JAS/32) is a powerful tool to aid
management in the planning, supervising, and controlling of projectoriented work by the critical path method. It is designed to be easily
used by nontechnical personnel. The JAS/32 operates under the
System/32 System Control Program, (5725-SC1). Depending on main
storage availability, the JAS/32 has the ability to handle 275 to 736
activities or work items and relationships per subnet.
The System/34 Client Accounting and Financial Reporting System
(CAFRS II) offers the public accounting profession a comprehensive aid
to solving the problems of client accounting. It helps the certified public
accountant public accountant or bookkeeper to operate a more
profitable and productive practice.
SYSTEM/34 BASIC ASSEMBLER and
MACRO PROCESSOR
5726-AS1
SYSTEM/34 OVER-THE-COUNTER INVOICING and
ACCOUNTS RECEIVABLE INQUIRY for DISTRIBUTORS
MANAGEMENT ACCOUNTING SYSTEM II (DMAS II)
5726-DM5
The System/34 Basic Assembler is a symbolic programming language
used to write programs or subroutines for the System/34. Source
programs written in this language are processed by the Basic Assembler program to produce relocatable object programs which are
subsequently converted to executable format by the System/34 System
Support Program Overlay Linkage Editor facility. The System/34
Libraries are used to store the source statements, relocatable object
programs and executable 'load' programs. The Basic Assembler may
also be used for assembly of relocatable subroutines for use with
System/34 RPG II and COBOL. The subroutines written in the Basic
Assembler language are coded by the user and separately assembled.
The process of program linking is accomplished during compilation of
the RPG II and COBOL source programs.
System/34 DMAS II is designed to satisfy the data processing needs of
a broad spectrum of distributors. Some distributors have special needs
relative to credit management and immediate invoice printing for
over-the-counter order entry business. With Over-the-Counter
Invoicing and Accounts Receivable Inquiry (5726-DM5). a DMAS II
user may inquire into accounts receivable information including detailed
!ransaction activity and quickly print an invoice for a specific order.
--- ------
.=. ~ ~~5: ISG
PS S.31
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
DISTRIBUTORS MANAGEMENT ACCOUNTING SYSTEM
(DMAS) FOR SYSTEM/34
SYSTEM/34 FOOD DISTRIBUTORS
MANAGEMENT ACCOUNTING SYSTEM (FDMAS)
BILLING '" 5726-D4A
ACCOUNTS RECEIVABLE ... 5726-D4B
INVENTORY CONTROL ... 5726-D4C
SALES ANALYSIS ... 5726-040
BILLING ... 5726-065
ACCOUNTS RECEIVABLE ... 5726-066
INVENTORY CONTROL ... 5726-067
SALES ANALYSIS ... 5726-068
These modular programs are available for either a 32K or 48K
System/34. The application function and data base are exactly the
same as the System/32 DMAS offering. These applications run in
single program mode on the System/34. Performance improvements in
the larger memory size version come from the reduction of overlays,
incorporation of larger blocking factors, and use of dual I/O areas. This
is most beneficial for the customer who has no requirement for an
interactive workstation system in the near future.
These programs are for either a 32K or 48K System/34. The application function and data base are exactly the same as the System/32
Food Distributors Management Accounting System offering. These
applications run in single program mode on the System/34. Performance improvements in the larger memory size version come from the
reduction of overlays, incorporation of larger blocking factors, and use
of dual I/O areas.
SYSTEM/34 LUMBER DEALERS
MANAGEMENT ACCOUNTING SYSTEM (LOMAS)
(Single Program Mode)
, BILLING '" 5726-D4E
ACCOUNTS RECEIVABLE ... 5726-D4F
INVENTORY CONTROL '" 5726-D4G
SALES ANALYSIS ... 5726-D4H
These modular programs are available for either a 32K or 48K
System/34. The function and data base are exactly the same as the
System/32 LDMAS offering. These applications run in single program
mode on the System/34. Performance. improvements in the larger
memory size version come from the reduction of overlays, incorporation
of larger blocking factors, and use of dual I/O areas. When all four
programs are installed, they constitute an interrelated application set
with an integrated data base. These applications have the industryoriented function and marketing support that will capture the interest of
your lumber and building material dealer prospect. They can help the
users manage their two largest business assets, accounts receivable
and inventory, and give them profit performance data on their products,
customers, and salespersons. These application programs can also
help the user increase operational efficiency and customer service. The
Payroll, Accounts Payable, and General Ledger programs of the
Distribution Financial Accounting System (DFAS) can co-reside with
Lumber Dealers Management Accounting System application programs.
With LDMAS and DFAS, the major data processing requirements and
the applications best meeting your prospect's needs can be selected.
SYSTEM/34 DISTRIBUTORS MANAGEMENT
ACCOUNTING SYSTEM II (DMAS II)
BILLING '" 5726-041
ACCOUNTS RECEIVABLE ... 5726-042
INVENTORY CONTROL ... 5726-043
SALES ANALYSIS ... 5726-044
PURCHASING ... 5726-D46
System/34 DMAS II is a workstation application system that puts data
processing in the hands of the using departments. Customer orders
can be entered from the order desk, cash posted to customer accounts
by the Accounts Receivable clerk, purchase orders created online by a
buyer, and stock receipts entered by either warehouse or receiving
department personnel. This can result in stock balances that reflect
realtime data, lead to improved customer service, fewer lost sales, and
optimum inventory investment; at the same time, greater control can be
provided over the entire purchasing process and the cash commitment
it involves.
SYSTEM/34 DISTRI BUTION
FINANCIAL ACCOUNTING SYSTEM (DFAS)
GENERAL LEDGER ... 5726-D6A
ACCOUNTS PAYABLE ... 5726-D6B
PAYROLL ... 5726-D6C
These three System/34 applications provide the distributor with an aid
for managing the business.
SYSTEM/343270 DEVICE EMULATION
5726-EM1
The 3270 Device Emulation program allows the System/34 and
locally-attached 5250 Information Display System devices to appear as
a 3270 Control Unit and devices to a host system.
SYSTEM/34 STUDENT ADMINISTRATION SYSTEM
STUDENT RECORDS '" 5726-E31
STUDENT ACCOUNTING ... 5726-E32
STUDENT SCHEDULING ... 5726-E33
The Student Records program, which provides the data base and file
maintenance functions, is a prerequisite for either or both of the other
packages. These three applications provide the school with a powerful
aid in managing its student record keeping functions.
SYSTEM/34 FORTRAN IV
5726-F01
System/34 FORTRAN IV processes programs written in the System/34
FORTRAN IV language, producing output suitable for execution with the
System/34 System Support Program (5726-SS1).
SYSTEM/34 FINANCIAL INSTITUTIONS
CUSTOMER ACCOUNTING SYSTEM
CUSTOMER INFORMATION FILE (CIF) ... 5726-F11
DEMAND DEPOSIT ACCOUNTING ... 5726-F12
SAVINGS ACCOUNTING ... 5726-F13
INSTALLMENT LOAN ACCOUNTING '" 5726-F14
These four applications provide broad application support for the small
commercial bank. The Customer Information File program includes the
data base, application conversion procedures, and file maintenance
procedures for the system. It is a prerequisite for the Demand Deposit
Accounting, Savings Accounting and Installation Loan Accounting
programs, which may be installed independently of each other. CIF
enables the bank to associate all of a customer's checking, savings, and
installation loan accounts with a single record that contains common
information about customers and their relationship to the bank. This
enables the bank to make decisions based on a broader knowledge of
the status of the customer's accounts. Account and customer
information is accessed by account number for daily transaction
processing, and by customer name for management reports, inquiries,
etc. The Demand Deposit Accounting, Savings Accounting and
Installation Loan Accounting programs support the three most
important data processing applications in a commercial bank. Each of
these programs contains a variety of functional options, enabling the
bank to tailor the application to its own requirements.
SYSTEM/34 MANAGEMENT SYSTEM for LAW FIRMS
5726-F52
The System/34 Management System for Law Firms application
program offers the partners in a law firm a practical, convenient means
of capturing time and disbursement data, and organizing that data into
meaningful working documents and management reports. The
application program is designed for the small to medium sized law firm.
It is a complete set of programs designed to assist the law firm in time
and disbursement accounting, billing and accounts receivable. These
programs capture and store data which is then organized into reports to
aid law partners in effectively controlling and managing the firm's
business functions. In addition, it can be utilized with the MMAS
General Ledger System application program (5726- M37) to provide
traditional general ledger functions such as balance sheet, income
statement and other reports describing the financial status of the firm.
- - ---------
= - - :§~§: ISG
Do not reproduce without written permission
PS S.32
PRODUCT SUMMARY - SOFTWARE
SYSTEM!34 PUBLIC BUDGETING and
ACCOUNTING SYSTEM (PBA)
5726-G21
The System/34 Public Budgeting and Accounting System (PBA)
provides a workstation-oriented financial control. planning and
accounting system for public institutions. It assists users in meeting
financial reporting requirements. preparing budgets through online
budget preparation and tracking. and controlling expenditures through
management reports. The system also provides periodic reporting of
expenditure and revenue accounts. and preparation of Balance Sheet
and General Ledger as well as year-end closing statements.
SYSTEM/34 HOSPITAL
FINANCIAL MANAGEMENT SYSTEM (HFMS)
PATIENT BILLING ... 5726-H11
ACCOUNTS RECEIVABLE ." 5726-H12
PAYROLL ... 5726-H13
GENERAL LEDGER/ACCOUNTS PAYABLE ... 5726-H14
The Hospital Financial Management System offers the small hospital a
disk data-based system comprised of a series of programs and
procedures that perform the accounting. management reporting and
statistical functions for patient billing. accounts receivable. payroll and
general ledger/accounts payable.
SYSTEM/34 MEDICAL GROUP MANAGEMENT SYSTEM
5726-H15
The Medical Group Management System is primarily intended for a
group of up to 99 doctors using a single accounting system.
SYSTEM/34 MEDICAL GROUP MANAGEMENT SYSTEM II
5726-H16
The System/34 Medical Group Management System II is designed to
provide an accounts receivable and third-party claims system for
doctors. groups of doctors. or clinics. The basic system is derived from
the System/32 Medical Group Management System lAP. For
System/32 users. programs are provided to convert master files from
the System/32 to the System/34 format.
SYSTEM/34 MEMBERSHIP and MAILING LIST SYSTEM
5726-K11
Associations are constituted to serve their memberships. Their prime
functions are information retrieval and dissemination. establishment of
standards and ethics. research. and representing their members to
external agencies. Items of general interest are disseminated through
association publications sent through the postal service. However. the
need often exists to make specialized mailings to selected members
with specific characteristics. Information exchange also takes place at
events sponsored by associations. Associations. then. have data
processing needs characterized by large data bases which must be
processed in total. but with the ability to process individual records or
groups of records on a selective or exception basis.
SYSTEM/34 - 5230 DATA COLLECTION SYSTEM SUPPORT
5726-M3A
The 5230 Data Collection System Support for System/34 provides the
manufacturer with a convenient. practical means of preparing shop floor
data for processing by the Manufacturing Management Accounting
System (MMAS) application programs. Data collected by the 5230
Data Collection System is edited. consolidated. and formatted for
processing by the MMAS Payroll. Inventory Management. and
Production Status and Costing lAPs. or for user-written manufacturing
management systems (with appropriate changes to the output
modules).
Aug 83
New
SYSTEM/34 MANUFACTURING MANAGEMENT
ACCOUNTING SYSTEM (MMAS)
PRODUCTION STATUS AND COSTING ... 5726-M31
PAYROLL ... 5726-M32
ACCOUNTS PAYABLE ... 5726-M33
ACCOUNTS RECEIVABLE ... 5726-M34
INVENTORY MANAGEMENT .. , 5726-M35
PRODUCT DEFINITION AND COSTING .. , 5726-M36
GENERAL LEDGER ... 5726-M37
SALES ANALYSIS ... 5726-M38
ORDER ENTRY AND INVOICING ... 5726-M39
The Manufacturing Management Accounting System (MMAS) provides
the manufacturer with a powerful aid in managing the business. MMAS
offers flexible applications specifically designed for the manufacturing
industry. MMAS provides key reports to help management direct and
control their business effectively.
SYSTEM/34 MANUFACTURING ACCOUNTING and
PRODUCTION INFORMATION CONTROL SYSTEM
MAPICS
PRODUCTION CONTROL AND COSTING ... 5726-M41
PAYROLL ... 5726-M42
ACCOUNTS PAYABLE ... 5726-M43
ACCOUNTS RECEIVABLE ... 5726-M44
INVENTORY MANAGEMENT ... 5726-M45
PRODUCT DATA MANAGEMENT ... 5726-M46
GENERAL LEDGER ... 5726-M47
SALES ANALYSIS ... 5726-M48
ORDER ENTRY AND INVOICING ... 5726-M49
DATA COLLECTION SYSTEM SUPPORT ... 5726-M4A
MATERIAL REQUIREMENTS PLANNING ... 5726-M4B
CAPACITY REQUIREMENTS PLANNING ." 5726-M4G
The System/34 Manufacturing Accounting and Production Information
Control System provides an integrated and comprehensive
workstation-oriented accounting. financial. and manufacturing control
system for the small-to-medium manufacturer and some of the like
process industries. The Accounts Payable, General Ledger. and Payroll
applications are designed to meet the needs of both the manufacturer
and the distributor. These three applications are inciuded in the twelve
applications of MAPICS. and are also marketed as Distribution Financial
Accounting System II (DFAS II) to the distribution industries.
SYSTEM/34 DISTRIBUTION FINANCIAL
ACCOUNTING SYSTEM II (DFAS II)
PAYROLL ... 5726-M42
ACCOUNTS PAYABLE ... 5726-M43
GENERAL LEDGER ... 5726-M47
The System/34 Distribution Financial Accounting System II provides an
integrated and comprehensive workstation-oriented financial control
system for the small to medium-sized distributor. The Accounts
Payable. General Ledger. and Payroll applications are designed to meet
the needs of both the manufacturer and the distributor. These three
applications are also included in the twelve applications of the
System/34 Manufacturing Accounting and. Production Information
Control System (MAPICS) and are also marketed collectively as DFAS II
to the distribution industries.
SYSTEM/34 CONSTRUCTION MANAGEMENT
and ACCOUNTING SYSTEM (CMAS/34)
JOB COSTING ... 5726-M66
GENERAL LEDGER ... 5726-M67
ACCOUNTS PAYABLE ... 5726-M68
PAYROLL AND LABOR COSTING ... 5726-M69
REVENUE ACCOUNTING ... 5726-M6A
The Construction Management and Accounting System for the
System/34 provides an integrated and comprehensive workstationoriented accounting and financial control system for the small-tomedium size construction firm and related project-oriented business.
The Payroll and Labor Costing. Accounts Payable. Job Costing.
Revenue Accounting. and General Ledger applications are designed to
meet the needs of the construction industry.
------ --- -
- ---
= - -:§~~
PS S.33
Do not reproduce without written permission
ISG
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/34 CONSTRUCTION MANAGEMENT
ACCOUNTING SYSTEM (CMAS)
SYSTEM/34 RETAIL MERCHANDISE and
AUDIT SYSTEMS (RMAS)
JOB COSTING '" 5726-M61
ACCOUNTS PAYABLE ... 5726-M62
PAYROLL ... 5726-M63
GENERAL LEDGER ... 5726-M64
SALES AUDIT ... 5726-XA2
MERCHANDISE CONTROL '" 5726-XA3
DATA PREPARATION ... 5726-XA4
RETAIL CREDIT CONTROL ... 5726-XA5
FINANCIAL APPLICATIONS BRIDGE '" 5726-XA7
The Construction Management Accounting System provides the
construction industry with a complete, yet flexible, method for
managing their Payroll, Accounts Payable, Job Costing, and General
Ledger. CMAS offers flexible applications specifically designed for the
construction industry. CMAS key reports help construction management effectively direct and control their business.
PERSONAL TEACHING AID/34 for the SYSTEM/34
5726-PT1
The System/34 Personal Teaching Aid/34 program provides an author
with an easy-to-use tool to write educational materials in the form of
courses for presentation to a student on the System 134. The author
using the System/34 presents text, asks questions, evaluates and
responds to answers and, in general, guides the student through a
learning experience. Also, the product can collect data on the student's
answers and courses completed. When analyzed, this data can assist
the user in determining the progress being made by the student.
SYSTEM/34 RPG II
5726-RG1
System/34 RPG II provides the following capabilities: RPG II Language
Level ... System/34 Device Support including WORKSTN (workstation)
device and Interactive Communications Feature (SSP-ICF) ... AutoReport ... Binary Synchronous Communications (BSC).
SYSTEM/34 SYSTEM SUPPORT PROGRAM
5726-SS1
System/34 System Support Program (SSP) provides control program-
The Retail Merchandise and Audit System for System/34 consists of
five modular yet interrelated programs that are designed to satisfy the
basic functional requirements of retailers.
SYSTEM/34 BUSINESS MANAGEMENT
ACCOUNTING SYSTEM
GENERAL LEDGER '" 5726-XBB
ACCOUNTS PAYABLE ... 5726-XBC
ACCOUNTS RECEIVABLE ... 5726-XBA
PAYROLL '" 5726-XBD
INVENTORY ACCOUNTING '" 5726-XB9
BILLING '" 5726-XBS
These multi-industry programs are written in System/34 BASIC
programming language and are an extension of the Business Management Accounting System programs with accounting functions that are
identical to those available for Datamaster. The System/34 Business
Management Accounting System programs provide the user with
powerful tools to perform business accounting while providing
additional management information. The programs contain functions
applicable to a wide range of industry classifications. The program
design provides an accounting base of information and incorporates a
flow of information in terms that are familiar to the user. This base of
information is then available to improve productivity through the
managerial reporting provided by the programs. The fundamentals of
accounting provided by the applications give the entry level user the
benefits of an automated acccunting system without the expense or
requirement of a programming staff.
ming functions for the System/34.
SYSTEM/34 SYSTEM SUPPORT PROGRAM
INTERACTIVE COMMUNICATIONS FEATURE (SSP-ICF)
5726-SS1 FEATURE #6000, #6001
Support is offered as a feature of the System/34 System Support
Program (SSP, 5726-SS1) and provides for Interactive Communication
(BSC and SNA/SDLC), Remote Procedure Initiation on the System/34,
and Communications Line Monitoring on a multipoint line (System/34
as a tributary station).
SYSTEM/34 SYSTEM SUPPORT PROGRAM
FINANCE SUBSYSTEM
5726-SS1 FEATURE #6010, #6011
The System/34 System Support Program Finance Subsystem,
operating with the Interactive Communications Feature (ICF)' can
communicate with the 3601 Finance Communication Controller, 4701
Finance Communication Controller, and 3694 Document Processor.
SYSTEM/34 MOTOR FREIGHT ACCOUNTING SYSTEM
MFAS (5726-T21)
Revenue Accounting: This application provides small- to medium-size
general commodity or specialty motor freight carriers with a powerful
aid in managing their business. The System/34 MFAS Revenue
Accounting program offers conventional revenue accounting functions
to the small and medium size general commodity and specialty carrier in
the motor freight industry. These functions are divided into the five
categories of (1) Freight Bill Entry and Daily Reports, (2) Accounts
Receivable, (3) Interline Payables, (4) Shipment Analysis, and (5)
Owner 1Operator Accounting.
SYSTEM/34 UTILITIES
5726-UT1
The following utilities are provided with System/34 Utilities program:
Data File Utility (DFU) ... Sort ... Source Entry Utility (SEU) ... Workstation Utility (WSU) ... Screen Design Aid (SDA). Each display station
using DFU, Sort, WSU Generator, SEU, and SDA has its own copy of
the utility (multiple copies can be executing at one time). Only one copy
of a specific WSU-created module can be executing at one time;
however, one WSU module services mUltiple display stations. All
models of the 5251/5252 Display Stations are supported by these
utilities.
SYSTEM/34 JOB ANALYSIS SYSTEM
JAS/34 (5726-XP1)
The System/34 Job Analysis System is a powerful aid to management
for planning, scheduling, supervising, and controlling project-oriented
work through the use of the critical path method. Designed to be easily
used by non-technical personnel, the JAS/34 functions consist of an
interactive data entry processor, network processor, and a report
processor.
WORKSTATION SEARCH FACILITY
for the SYSTEM/34 (WSF /34)
5726-XR1
The Workstation Search Facility /34 provides System/34 Workstation
users with a powerful tool to search disk files rapidly for records
meeting terminal user-selected search criteria. This facility is designed
to be used as a means of selecting records for further processing by
user-written inquiry, file maintenance, order entry, and other programs.
This offering will allow the user to define the searches required that will
best aid the organization. WSF 134 is applicable to any industry
classification. Manufacturers and distributors can use the facility for
customer and item searches; hospitals for patient or guarantor; schools
for student lookups, etc.
SYSTEM/36 5224/5225 ADVANCED PRINTER FUNCTION
(APF/36) 5727-AP1
The System/36 5224/5225 Advanced Printer Function allows the
System/36 to use special functions on the 5224 mdls 1 and 2, and the
5225 mdls 1-4 printers. APF /36 consists of a forms generation utility
and an alternate character set capability.
SYSTEM/36 ASSEMBLER and MACRO PROCESSOR
5727-AS1
.
The System/36 Assembler program is a symbolic programming
language used to write programs or subroutines for the System/36.
The System/36-supplied macro instructions perform system services
and provide device support for the Assembler user.
SYSTEM/36 BASIC
5727-BA1
System/36 BASIC (Beginners All-purpose Symbolic Instruction Code)
is a high-level interactive language for users who have commercial data
processing requirements or who need to solve business, technical, and
scientific problems.
- ------
PS S.34
Do not reproduce without written permission
= - -:§~~ ISG
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
SYSTEM/36 BUSINESS REPORT/APPLICATION
DEVELOPMENT SYSTEM (SYSTEM/36 BRADS)
5727"BR1
The System/36 Business Report/Application Development System
brings data base power to users of the System/36. With BRADS,
users can productively develop and install system-justifying applications, often without becoming or hiring programmers. Users can also
expand the value of applications which run on their System/36 by
querying the data bases and by developing new reports.
SYSTEM/36 COBOL COMPILER and LIBRARY
5727-CB1
The System/36 1974-level COBOL Compiler and Library operates
under control of the System/36 System Support Program (5727-SS1).
SYSTEM/36 DISTRIBUTORS MANAGEMENT
ACCOUNTING SYSTEM (DMAS)
BILLING ... 5727-041
ACCOUNTS RECEIVABLE ... 5727-042
INVENTORY CONTROL ... 5727-043
SALES ANALYSIS ... 5727-044
PURCHASING ... 5727-045
INVENTORY MANAGEMENT ... 5727-046
GENERAL LEDGER ... 5727-047
ACCOUNTS PAYABLE .. , 5727-048
PAYROLL ... 5727-049
CROSS-APPLICATION SYSTEM SUPPORT ... 5727-D4A
System/36 DMAS is a workstation application system that puts data
processing in the hands of the using departments. Customer orders
can _be entered from the order desk, cash posted to customer accounts
by the accounts receivable clerk, purchase orders created online by a
buyer, and stock receipts entered by either warehouse or receiving
department personnel. This can result in stock balances that reflect
realtime data, lead to improved customer service, fewer lost sales, and
optimum inventory investment. At the same time, vendor invoices can
be entered by accounts payable personnel, journal entries processed by
the bookkeeper and paychecks created by the payroll department. All
of this can provide the user with the ability to exercise control over all
aspects of his business using the facilities of one system. System/36
DMAS includes the Inventory Management application which is a tool
designed to assist buyers and management with the replenishment
ordering of many different types of inventory. It incorporates innovative
inve-ntory management techniques that can, through better buying, help
reduce the overall inventory investment - and the costs associated with
acquiring and carrying inventory - while helping to assure that the right
items are available to satisfy high levels of customer demand. Facilities
are provided to ease conversion of System/34 DMAS customers to
System/36 DMAS. All that is required is that they back up their
System/34 DMAS II master files and then restore them on System/36.
The restore procedure is part of the System/36 DMAS installation
process. System/36 DMAS includes all the System/34 DMAS II,
DFAS II and INVEN/3 functions. It incorporates system functions to
take advantage of the workstation and multiprogramming capabilities of
the System/36.
SYSTEM/36 FORTRAN IV
5727-F01
The System/36 FORTRAN IV (X3.10-1966) program processes
programs written in the System/36 FORTRAN IV (System/34compatible) language, producing output suitable for execution with the
System/36 System Support Program (5727-SS1).
SYSTEM/34to SYSTEM/36 MIGRATION AID
5727-MA1
The System/34 to System/36 Migration Aid is a set of System/34 and
System/36 programs and procedures that assist the user in moving
System/34 applications to a System/36. This Migration Aid does not
address conversion of MRJE or SRJE communications applications.
The Migration Aid allows a user to do the major part of the migration
(the library analysis work) on the installed System/34 prior to the arrival
of the System/36. Source program compilations are run on the
System/36. The Migration Aid runs on a 48K minimum System/34
and all models of the System/36. The use of the Migration Aid can
relieve the user of many time consuming tasks, ensure greater migration
accuracy, and improve user productivity during the migration.
SYSTEM/36 MANUFACTURING ACCOUNTING and
PRODUCTION INFORMATION CONTROL SYSTEM
MAPICS
PRODUCTION CONTROL AND COSTING ... 5727-M41
PAYROLL ... 5727-M42
ACCOUNTS PAYABLE ... 5727-M43
ACCOUNTS RECEIVABLE ... 5727-M44
INVENTORY MANAGEMENT ... 5727-M45
PRODUCT DATA MANAGEMENT ... 5727-M46
GENERAL LEDGER ... 5727-M47
SALES ANALYSIS ... 5727-M48
ORDER ENTRY AND INVOICING '" 5727-M49
DATA COLLECTION SYSTEM SUPPORT ... 5727-M4A
MATERIAL REQUIREMENTS PLANNING ... 5727-M4B
CAPACITY REQUIREMENTS PLANNING ... 5727-M4G
CROSS-APPLICATION SYSTEM SUPPORT ... 5727-M4X
The System/36 Manufacturing Accounting and Production Information
Control System provides an integrated and comprehensive
workstation-oriented accounting, financial, and manufacturing control
system for the small-to-medium manufacturer and some of the like
process industries. The Accounts Payable, General Ledger, and Payroll
applications are designed to meet the needs of both the manufacturer
and the distributor. These three applications are included in the 13
applications of MAPICS, and are also marketed as Distribution Financial
Accounting System II (DFAS II) to the distribution industries.
SYSTEM/36 CONSTRUCTION MANAGEMENT and
ACCOUNTING SYSTEM (CMAS)
JOB COSTING ... 5727-M66
GENERAL LEDGER ... 5727-M67
ACCOUNTS PAYABLE ... 5727-M68
PAYROLL AND LABOR COSTING ... 5727-M69
REVENUE ACCOUNTING ... 5727-M6A
CROSS-APPLICATION SYSTEM SUPPORT ... 5727-M6X
The System/36 Construction Management and Accounting System
provides an integrated and comprehensive workstation-oriented
accounting and financial control system for the small-to-medium size
construction firm and related project-oriented business. The Payroll
and Labor Costing, Accounts Payable, Job Costing, Revenue Accounting, and General Ledger applications are designed to meet the needs of
the construction industry.
SYSTEM/36 OFFICE MANAGEMENT SYSTEM
OMS/36 (5727-0S1)
The System/36 Office Management System is a set of related office
functions which can be used· by principals and secretaries to improve
their productivity. OMS/36 complements the text handling functions
provided by the System/36 Text Management System.
SYSTEM/36 RPG II
5727-RG1
The System/36 RPG II Compiler operates under control of the
System/36 System Support Program (5727-SS1). It provides the
following capabilities: RPG II Language Compiler ... Auto-Report ...
Support for System/36 devices including WORKSTN (workstation)
device and Interactive Communications feature SSP-ICF ... RPG II
support for Binary Synchronous Communications(BSC).
SYSTEM/36 SYSTEM SUPPORT PROGRAM (SSP)
5727-SS1
The System/36 System Support Program provides control programming functions for the System/36. These functions support user
application programs and IBM programs and provide a number of
independent general system integrity and ease-of-use facilities.
System/36 SSP is layered to enhance productivity for all of its users.
HELP menus and text, prompted procedures, and Operations Control
Language are all available. Procedure Control Expressions allow
building additional user procedures with full job stream control using
substitution, branching, and some arithmetic functions.
SYSTEM/36 EXTENDED SYSTEM SUPPORT PROGRAM
5727-SS1 FEATURE #6000
The System/36 Extended System Support feature provides support for:
Diskette I Format ... Multinational Character Set ... Tape Savel Restore
and Data Interchange ... 1255 Magnetic Character Reader Attachment.
---- ------ - ---
.::.~=';'= ISG
PS S.35
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
SYSTEM/36 SYSTEM SUPPORT PROGRAM
COMMUNICATIONS
5727-SS1 FEATURE #6001
The Communications feature supports the autocall adapter and the X.21
line adapter in the MLCA. The logic base for Multiple Session Remote
Job Entry (MSRJE), 3270 Device Emulation (3270 DE) and Interactive
Communications feature (SSP-ICF) is contained in the Communications
feature; this includes CNFIGICF, ENABLE/DISABLE and data
management.
SYSTEM/36 SYSTEM SUPPORT PROGRAM
INTERACTIVE COMMUNICATIONS FEATURE (SSP-ICF)
5727-SS1 FEATURE #6002
System/36 SSP Interactive Communications feature provides support
for: Interactive communications between application programs .. .
Multiple concurrent communication sessions over the same data link .. .
Multiple concurrent user application programs which use communications ... An application program interface which is substantially
independent of the link and logical protocols (BSC and SNA/SDLC).
SYSTEM/36 SYSTEM SUPPORT PROGRAM
3270 DEVICE EMULATION
5727-SS1 FEATURE #6003
The 3270 Device Emulation feature is a utility program that supports
both BSC and SNA/SDLC 3270 line protocols. No user code is
required.
SYSTEM/36 SYSTEM SUPPORT PROGRAM
MULTIPLE SESSION REMOTE JOB ENTRY
5727-SS1 FEATURE #6004
System/36 Multiple Session Remgte Job Entry (MSRJE) provides a
common user interface for performing the RJ E function to a host
system running RES, JES2, JES3, RSCS and POWER/VSE. Multiple
readers, writers, punches (disk files), and a console are supported. The
maximum number of devices are supported.
New
SYSTEM/36 BUSINESS MANAGEMENT
ACCOUNTING SYSTEM
GENERAL LEDGER ... 5727-XB2
ACCOUNTS PAYABLE ... 5727-XB3
ACCOUNTS RECEIVABLE ... 5727-XB4
PAYROLL ... 5727-XB5
INVENTORY ACCOUNTING ... 5727-XB6
BILLING ... 5727-XB7
These multi-industry programs are written in System /36 BASIC
programming language and are an extension of the Business Management Accounting System programs with accounting functions that are
identical to those available for the System/34. The System/36
Business Management Accounting System programs provide the user
with powerful tools to perform business accounting while providing
additional management information. The programs contain functions
applicable to a wide range of industry classifications.
SYSTEM/36 WORKSTATION SEARCH FACILITY
5727-XR1
The System/36 Workstation Search Facility provides the workstation
user with a powerful, yet easy-to-use, tool to display records from disk
files based on display station user-selected search criteria. This
System/36 product is based on the proven System/34 Workstation
Search Facility. The product applies to any industry classification.
OS ASSEMBLER H
5734 - AS1
This two-pass assembler provides a significant improvement in
performance on any as M FT or MVT system having a region size of at
least 180K or any VS1 or VS2 system with 192K of virtual memory
given to the assembler.
COBOL INTERACTIVE DEBUG (5734-CB4)
COBOL Interactive Debug provides COBOL programmers the ability to
debug programs conversationally at a terminal using high-level
language.
SYSTEM/36 SYSTEM SUPPORT PROGRAM
DATA ENCRYPTION STANDARD (DES)
SUBROUTINE FOR BANKING
5727-SS1 FEATURE #6005
COBOL Interactive Debug operates under TSO or CMS through a
comprehensive set of subcommands which enable the programmer to
modify, dynamically monitor, and completely control the execution of
his COBOL object program.
The DES subroutine can be used to encrypt or decrypt sensitive data or
to generate personal identification numbers (PINs). Typically, DES is
used to generate PI Ns for use with the 3624 Consumer Transaction
Facility.
TSO COBOL PROMPTER
5734-CP1
SYSTEM/36 SYSTEM SUPPORT PROGRAM
DISTRIBUTED DISK FILE FACILITY (DOFF)
5727-SS1 FEATURE #6006
DDFF target data manager allows System/34 application programs to
access System/36 data files without changing any user code. The user
programs use standard data management in RPG II, Assembler and
COBOL to access a disk file. Just as the physical location on the disk is
not contained in the user programs, neither is the physical system
location. Programs running on a System/34 may access data files on
that System/34, another System/34, a System/36 or a System/3 mdl
15D.
SYSTEM/36 TEXT MANAGEMENT SYSTEM
TMS/36 (5727-TX1)
The System/36 Text Management System (TMS/36) provides the user
with a library of programs for document creation, revision, viewing,
merging user data files, spelling aids, and printing functions. Data
processing and document processing can be performed concurrently
using the multiprogramming capabilities of the System/36. These
functions are performed through a 1,920-character, multipurpose 5251,
5291 or 5292 Display Station. The same display station can be used for
both data processing and document processing.
SYSTEM/36 UTILITIES
5727-UT1
The following utilities are provided with the System/36 Utilities
program: Data File Utility (DFU) ... Source Entry Utility (SEU) ...
Workstation Utility (WSU) ... Screen Design Aid (SDA). Each display
station using DFU, SEU, and SDA has its own copy of the utility
(multiple copies can be executing at one time). Only one copy of a
specific WSU-created program can be executing at a time; however,
one WSU program can service multiple display stations. All display
stations supported by System/36 are supported by these utilities. All
the utilities are supplemented by help text for improved easy-ot-use.
The TSO COBOL Prompter provides TSO COBOL users with the
capability of conversationally entering the required job parameters to
execute a COBOL compilation.
------- -------=
ISG
=-:. :§~S:
Do not reproduce without written permission
PS S.36
Aug 83
PRODUCT SUMMARY - SOFTWARE
New
TSO ASSEMBLER PROMPTER
5734-CP2
compiled by FORTRAN IV (Gl) or Code and Go FORTRAN program
products using the TEST compiler option.
The TSO Assembler Prompter operates as a command processing
program under the control of the Time Sharing Option of the IBM
Operating System. The Prompter is a means for the programmer to
invoke the System Assembler to process source data sets and to
produce object modules. The prompter returns to the programmer any
error and informational messages that are generated, allowing the
programmer to correct his error at the terminal.
ELECTRONIC PAYMENT SYSTEMS SUPPORT
CHECK PROCESSING CONTROL FEATURE
DEPOSIT PROCESSING FEATURE
5734-F11 FEATURES #6072-#6073
TSO FORTRAN PROMPTER
5734-CP3
TSO FORTRAN Prompter (5734-CP3) aids in conversationally entering
the required job parameters to initiate a FORTRAN (G 1) compilation.
CONSUMER GOODS SYSTEM (COGS)
ALLOCATION - OS (5734-032)
ALLOCATION - DOS (5736-031)
COGS-Allocation provides the consumer goods processor with the
ability to determine how much of various finished products to make and
ship to stocking locations to satisfy service and inventory objectives
while satisfying shipping incentives and restrictions. Simulation of the
ordering process is included to allow a preview of the effects of
management policy alternatives.
CONSUMER GOODS SYSTEM - S/360 and S/370
COGS - FORECASTING OS (5734-033)
COGS - FORECASTING DOS (5736-032)
This program is designed to give the consumer goods processor the
ability to select a proper forecasting model for a provided set of data
and the facility to monitor the model's forecasting reliability.
The Electronic Payment Systems Support/Check Processing Control
System (CPCS) - Deposit Processing Feature provides the application
support necessary to incorporate the 3895 Document Reader/Inscriber
into a fully integrated check-processing system. The 3895 is an online,
high-speed device that optically reads data from up to three numeric
OCR fields, including the hand or machine-printed amount on a check
or deposit slip and inscribes that amount in magnetic ink on the ABA
code line.
TELECOMMUNICATIONS CONTROL SYSTEM
TCS (5734-F31)
The Telecommunications Control System (TCS) is a teleprocessing (TP)
system providing a wide scope of message and network control
functions. It supplies complex but easy-to-use communications
services and access to a wide variety of standard, online, application
programming services. TCS was designed to meet the demanding
requirements of the securities industry in the following areas: Large
network, high throughput, sophisticated CCAP-like message switching,
and high reliability combined with powerful network control facilities.
These requirements for TCS have been specified by the securities
industry; they are, however, general in nature, and are not restricted to
that particular industry. TCS runs under OS/VSl or OS/VS2 (SVS or
MVS) on a S/370 in conjunction with the Telecommunications Access
Method (TCAM or TCAM NCP /VS Direct).
OS FORTRAN IV LIBRARY (MOD II) (5734-LM3)
CODE-AND-GO FORTRAN (5734-F01)
Code-and-Go FORTRAN, which operates under the Time Sharing
Option (TSO) of the IBM Operating System and CMS, as well as in a
batch environment, provides programmers with a high-speed processor
for compiling, loading and executing programs written in the FORTRAN
IV language with extensions for list-directed input/output. Code-andGo FORTRAN opens the area of rapid response time sharing to many
programmers who are already familiar with the FORTRAN language. Its
simplicity and ease-of-use is particularly suited to the 'problem-solver:
who writes, debugs, and executes relatively short programs at the
terminal; and to the' production programmer', who debugs sections of a
large program online before running that program through a standard
batch compiler. As a batch processor Code-and-Go FORTRAN's
compile-load-go mode of operation eliminates much system overhead
and is thus ideally suited for processing large numbers of small jobs.
OS FORTRAN IV (G1) (5734-F02)
FORTRAN IV (G 1) is an extended version of FORTRAN IV (Gl. adapted
to run in Time Sharing Option (TSO) environment, under CMS, and in an
OS (batch) mode.
OS FORTRAN IV (H EXTENDED) COMPILER
5734-F03
The FORTRAN IV (H Extended) Compiler, with the FORTRAN IV Library
(Mod II), provides OS and CMS FORTRAN users with increased
performance and additional functional capabilities.
SYSTEM/7FORTRANIV
HOST COMPILER and LIBRARY
5734-F04 - OS; 5736-F01 - DOS
Provides high-level FORTRAN IV Language support for the System/7
user, enhances the System/7 Host Program Preparation Facility II, and
offers to the System /7 user the ease and speed of coding in the
FORTRAN language.
FORTRAN INTERACTIVE DEBUG
5734-F05
FORTRAN Interactive Debug provides FORTRAN programmers the
ability to debug programs conversationally at a terminal using high-level
language. FORTRAN Interactive Debug operates under TSO and CMS
through a comprehensive set of subcommands which enable the
programmer to control, monitor, and modify executing FORTRAN
programs. The programmer can interact with an executing FORTRAN
program in a simple, natural, 'FORTRAN-like' fashion. He can refer to
program locations by FORTRAN statement labels or by TSO or CMS
line numbers. He can access or change values of FORTRAN variables
by specifying the corresponding symbolic FORTRAN variable names.
FORTRAN Interactive Debug operates under TSO on programs
OS FORTRAN IV Library (Mod II) contains mathematical and service
subprograms required by the OS FORTRAN IV (H Extended) Compiler
(5734-F03). These are two main types of subprograms. The first
computes mathematical values, such as the square root or sine, of data
arguments supplied during problem program execution. The second
group communicates with the operating system to obtain services, such
as input/output, for the problem program. These subprograms are
combined, as needed, with the compiler output during linkage editing to
form a complete, executable problem program.
OS PL/I RESIDENT LIBRARY
5734-LM4
This program is used in conjunction with the OS PL/I Optimizing
Compiler. For the complete compilation and execution of a PL/ I
program, the following program products are required: OS PL/I
Optimizing Compiler (5734- PL 1) - for compilation .. , OS PL/ I Resident
Library (5734-LM4) - for link-editing ... OS PL!I Transient Library
(5734-LM5) - for execution.
OS PL/I TRANSIENT LIBRARY
5734-LM5
This program is used in conjunction with the OS PL/I Optimizing
Compiler and the OS PL/I Checkout Compiler.
REQUIREMENTS PLANNING
5734-M51
This program offers a mechanized approach to detailed requirements
planning for a large segment of manufacturing industries. It uses the
Item Master and Product Structure files created by the Chained File
Management System. It performs time series planning to determine
planned orders for finished products, assemblies, sub-assemblies,
parts and material based upon the input of forecasts and/or customer
orders.
OS PL/I OPTIMIZING COMPILER
5734-PL1
The OS PL! I Optimizing Compiler is designed specifically for generation
of very fast object programs. Good all-around performance is achieved
through the incorporation of the best design features of a number of
well-proven compilers. The compiler operates under the IBM
Operating System and under the Conversational Monitor System (CMS)
component of Virtual Machine Facility/370 (VM/370).
-------- -----
PS S.37
Do not reproduce without written permission
= - - :§~§: ISG
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
OS PL/I CHECKOUT COMPILER RELEASE 3
5734-PL2
Interpretive Processing: The Checkout Compiler provides comprehensive facilities for checking and debugging PL! I programs. It provides
many of these functions because it is an interpretive processor in both
background and foreground.
OS PL/I OPTIMIZING COMPILER and LIBRARIES
5734-PL3
This package provides one ordering number for the following programs
on one tape: Compiler (5734- PL 1) ... Resident Library (5734- LM4) ...
Transient Library.
VIDEO/370
DOS (5736-RC3)
OS (5734-RC5)
VIDEO/370, IBM's Visual Data Entry Online System which runs on
S/360 or S/370 is an online data entry program product for both
transcriptive and distributive means of collection and verification of
source data. It performs most of the functions of the 29 Card Punch,
59 Verifier, 129 Card Data Recorder, 50 Magnetic Data Inscriber 50 and
DATA/360-2260 functions with cost reduction facilities made possible
by an online local or remote 3270 System and computer program logic.
VIDEO /370 is of most significance to customers who are using
keypunches, key-to-tape or off-line key clusters to disk, and to those
who have a requirement for source data entry.
OS SORT/MERGE
5734-SM1
The OS Sort/ Merge (5734-SM 1) satisfies the sorting and merging
requirements of both tape-oriented and disk-oriented installations. The
program will use different sorting and merging techniques depending
on: The control information supplied by the user ... the amount of main
storage and secondary storage which is available to the program.
VSPX provides a comprehensive tool in the planning and operating of a
distribution and delivery system. It computes near-optimal routes for
the delivery of products or services by a fleet of vehicles. Since the
program contains a wide range of options, it can be applied to most
fleet routing and delivery situations. The advantages over manual
methods are: Increased efficiency and speed of scheduling, improved
routing and cost reductions through better fleet utilization.
MATH/BASIC
5734-XM8
MATH/BASIC is a set of conversational routines for the solution of the
most frequently encountered mathematical problems in science and
industry. The library operates under VS BASIC with VSPC, VM /370
CMS or TSO. MATH/BASIC is designed to meet the needs of the
engineer and scientist. The conversational features of MATH/BASIC
allow a non-data processing oriented user to use the programs with a
minimum of training.
MINIPERT
5734-XP3
MINIPERT is an interactive Critical Path Method (CPM) program
designed to help your customer meet the challenging managerial
requirements of today's complex research, engineering and manufacturing projects. The value of CPM for project control has been proven
in many applications such as construction, special products manufacture, maintenance and repair, research and development, etc. Effective
project management requires good planning, control, and measurement
of job status and financial performance with minimai delay. MINIPERT
provides the management tool needed to meet these requirements and
improve the productivity of your customer's valuable resources: men,
machine, money and material.
PROJECT MANAGEMENT SYSTEM IV
5734-XP4
TSO DATA UTILITIES
5734-UT1
The OS TSO Data Utilities consists of the following terminal commands: COPY ... FORMAT ... LIST ... MERGE.
STAT/BASIC
5734-XA3
STAT /BASIC is an interactive program encompassing the most
commonly used statistical techniques for the analysis of numerical data.
It operates under ITF (DOS, OS, or TSO) or VS BASIC with VSPC,
VM /370 CMS, or TSO.
APPLICATION PROGRAM GENERATOR
OS - 5734-XC3; DOS - 5736-XC3
The System /7 Application Program Generator (APG /7) offers
high-level program support for many different sensor-based applications found in the plant automation, process control, and dataacquisition applications. APG/7 reduces the programming effort
required to install and maintain such applications. It allows the
customer or IBM SE to focus attention on application design, rather
than machine-oriented programming details.
BUSINESS ANALYSIS/BASIC
5734-XMB
This comprehensive set of interactive routines is used with VS BASIC
under VSPC, VM/370 CMS, or TSO and with ITF under OS, DOS or
TSO. It consists of 30 routines written in the BASIC language,
providing the problem-solver professional with procedures for data
generation and maintenance, spread sheet analysis, investment
analysis, break-even of cost-volume-profit analysis, depreciation
analysis, and time series analysis. The program is designed so that a
detailed knowledge of programming is not required.
PROCEDURE LIBRARY - MATHEMATICS
5734-XM3
This program product provides in the PL! I language
computational tools for the scientist and engineer.
VEHICLE SCHEDULING PROGRAM - EXTENDED
VSPX OS (5734-XM5)
VSPX DOS (5736-XM3)
powerful
This program, an integrated collection of computer program modules,
has been developed to meet the challenging managerial requirements of
today's complex research, engineering and fabrication programs.
Projects of all types in construction, special products manufacture,
large-scale R&D, etc., have been growing increasingly complex.
Effective management requires up-to-date knowledge of job status and
financial performance. Even more important, management needs to
determine the probable schedule and cost impact of contemplated
changes in plan. PMS IV provides the scientific management tools
needed for making better delivery promises, for spotting out-of-line
conditions, for meeting schedules, and for controlling costs. PMS IV
will help your customers plan and control the use of their valuable
resources: men, machines, money and material.
GENERAL PURPOSE SIMULATION SYSTEM V
OS (5734-XS2) - DOS (5736-XS3)
GPSS V provides an easy-to-use and easy-to-understand tool for
modeling and examining the behavior of systems in the engineering and
management science areas. This system will accommodate varying
model sizes in a modular fashion for S/360 and S/370 configurations
with storage capacities ranging from 64K bytes upward for DOS or
DOS!VS, and from 128K bytes upward for OS or OS/VS.
CONTINUOUS SYSTEM MODELING PROGRAM III
and GRAPHIC FEATURE
CSMP III (5734-XS9)
CSMP III and the CSMP III Graphic Feature are designed for the
simulation of continous systems.
INFORMATION MANAGEMENT SYSTEM (IMS/360)
VERSION 2 (5734-XX6)
IMS/360 is an OS-based program product which supports userwritten batch processing and teleprocessing applications. It provides
extensive supervisory level services in two major categories: Data base
management services which support the implementation of mUltiple
applications in a common data base environment ... Data communications management services which support the implementation of
multiple applications in a shared terminal environment.
------- ----:: - -~~§: ISG
PS S.38
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
CICS/OS - STANDARD V2 (5734-XX7)
CICS/DOS - ENTRY (5736-XX6)
CICS/DOS - STANDARD (5736-XX7)
These systems form an upward compatible family of Data Base/Data
Communications (DB/DC) systems providing a common application
program interface. They simplify the implementation of terminaloriented applications and provide an upward migration path. This
compatibility exists at the source code level.
SYSTEM/3 DOS/VS RPG II
CONVERSION PREPROCESSOR
5735-CV1
The System/3 DOS/VS Conversion Preprocessor is a set of programs
designed to convert batch application programs written for the
System/3 mdl 10 Disk and mdls 8, 12, 15 RPG II Compilers (5702RG1, 5704-RGl, 5704-RG2, 5705-RG1) to a form acceptable to the
DOS/VS RPG II Compiler (5746-RG1). The Auto Report source
programs and library members are also processed. The Conversion
Preprocessor exists in two functionally equivalent programs: For use on
System/3 ... for use under DOS/VS.
PROGRAMMABLE STORE SYSTEM
SUBSYSTEM PROGRAM PREPARATION SUPPORT II
(SPPS II) VERSION 1 RELEASE 3 Modification 0
5735-D16
Subsystem Program Preparation Support II (SPPS II) supports the 3650
and 3680 Programmable Store Systems. It provides a general purpose
programming facility for writing application programs to run in the
Programmable Store System store controllers and the programmable
terminals. These programs are prepared on the host processor,
transmitted to the 3651 or 3684 store controller and executed at the
store controller or the programmable terminal. SPPS II provides
support for all models of the 3683 Point of Sale Terminal and 3684
Point of Sale Control Unit, the 3685 Display Control Unit mdls 1 and 2,
3286 Display Station mdl 1, the 3651 Store Controller mdls 25 and 75,
the 3653 mdl 1P and the 3663 Supermarket Terminal mdls 1 P and 3P.
3680 PROGRAMMABLE STORE SYSTEM/
SALES APPLICATION
RELEASE 2.0 Modification Level 0
5735~D61
The 3680 Programmable Store System/Sales Application program
provides standard and extended sales transaction functions for a variety
of store environments. The control unit and terminal segments
programs are written in the Subsystem Program Preparation Support II
(SPPS II) language allowing the user to modify them to suit his
particular environment.
3680 PROGRAMMABLE STORE SYSTEM/
STORE ADMINISTRATION APPLICATION
RELEASE 2
5735-D62
The 3680 Programmable Store System/Store Administration Application program provides functions to assist in a variety of administrati
ve tasks and enhances operation of the point-of-sale system in the
store. The programs, both control unit and terminal segments, are
written in the Subsystem Program Preparation Support II (SPPS II)
language allowing the user to modify them to suit his particular
environment.
EPIC: SOCRATES (5735-E91)
EPIC: FAST (5735-E92)
EPIC: BUDGET/FINANCE (5735-E93)
The EPIC programs provide essential administrative and financial
records for elementary and secondary schools, junior and community
colleges, four year colleges, and universities. EPIC is written using the
American National Standard COBOL subset language for user
compilation on 1130, System/3 or on S/360/370 under DOS or OS.
3650 PROGRAMMABLE STORE SYSTEM
PHARMACY APPLICATION/STORE ENVIRONMENT
RELEASE 2, Modification Level 0
PASE (5735-H11)
The 3650 Programmable Store System Pharmacy Application/Store
Environment program provides a base set of functions to support the
operation of a pharmacy either with or without the POS
Application/Retail Environment. The program modules are written in
the Subsystem Program Preparation Support II language, allowing the
user to modify or add function as required to suit a particular operation.
The pharmacy application operates in an environment where responsibilities can be shared between pharmacy and headquarters personnel.
Aug 83
New
The host system communicates with the pharmacy application through
the store data base. The host sends control information, such as price
changes, to the store(s) and retrieves operational information, such as
the pharmacy log, for audit and host applications processing.
INFORMATION/SYSTEM
5735-0ZS
Information/System is an interactive retrieval program designed for use
with its companion features and products. Information/System is the
base for all Information/System features and products. The applications that the user wishes to perform determine which companion
features
and
products
he
should
select
for
use
with
Information/System. The companion products to Information/System
are: Information/MVS (5665-955) .,. Information/VM-VSE (5668919).
The companion features to Information/System are:
Information/Management ... Information Access.
ADVANCED COMMUNICATIONS FUNCTION
FOR TCAM (ACF/TCAM) VERSION 1
OS/VS (5735-RC1)
Advanced Communications Function for TCAM (ACF /TCAM) is a
program for users of OS/VS1 and OS/VS2 (SVS and MVS) that can
provide capabilities for data communication in a network with a single
S/370 or with multiple S/370s. MVS support includes support of the
MVS/System Extensions program product.
ADVANCED COMMUNICATIONS FUNCTION
FOR VTAM RELEASE 1 (ACF/VTAM)
DOS/VS (5746-RC3) - OS/VS (5735-RC2)
Advanced Communications Function for VTAM Version 1 (ACF/VTAM)
is a program for users of DOS/VS, OS/VS1 and OS/VS2 (SVS and
MVS) that can provide new capabilities for data communication in a
network with a single S/370 or with multiple S/370s. These capabilities described below are added to VTAM functions as described in the
pages for each SCP (DOS/VS, OS/VS1, and OS/VS2).
ADVANCED COMMUNICATION FUNCTION
For VTAM RELEASE 2 (ACF/VTAM R2)
DOS/VSE (5746-RC3) - OS/VS (5735-RC2)
Advanced Communications Function for VTAM Version 1 Release 2
(ACF/VTAM R2) is a program for users of DOS/VSE, OS/VS1 and
OS/VS2 (MVS) that can provide additional capabilities for problem
determination, network operation and data communications in. a
network with a single host system or with mUltiple host systems.
ACF/VTAM Vl R2 is designed to operate with ACF/NCP/VS Release
1 or with ACF / NCP /VS Release 2. Some of the additional capabilities
provided by ACF/VTAM R2 are supported only in conjunction with
ACF/NCP/VS R2.
ADVANCED COMMUNICATIONS FUNCTION
for VTAM RELEASE 3 (ACF/VTAM R3)
DOS/VSE (5746-RC3)
OS/VS1 and OS/VS2 MVS (5735-RC2)
Advanced Communications Function for VTAM Version 1 Release 3
(ACF/VTAM R3) is a program for users of DOS/VSE, OS/VS1, and
OS/VS2 (MVS) that offers expanded network configurability, network
management capability and enhanced network recoverability. Multiple
system networks require installation of the ACF /VTAM V1 R3
Multisystem Networking Facility (MSNF) feature.
ADVANCED COMMUNICATIONS FUNCTION for TCAM
(ACF/TCAM) VERSION 2 RELEASE 1
OS/VS1 and OS/VS2 MVS
5735-RC3
Advanced Communications Function for TCAM Version 2 Release 1 is a
program for users of OS/VS1 and OS/VS2 (MVS) that can provide
additional capabilities for improved installability and usability, problem
determination, network operation and data communications in a
network with a single S/370 or with multiple S/370s. To support
multiple S/370 networks, a user must install the ACF/TCAM V2
·Multisystem Networking Facility feature.
ADVANCED COMMUNICATIONS FUNCTION for TCAM
(ACF/TCAM) VERSION 2 RELEASE 3
OS/VS1 and OS/VS2 MVS
5735-RC3
Advanced Communications function for TCAM Version 2 Release 3 is a
program for users of OS/VS1 and OS/VS2 (MVS) that offers expanded
network configurability, network management capability and enhanced
network recoverability. To support multiple S/370 networks, a user
--------- ---
.::.::::::==';'=
ISG
Do not reproduce without written permission
PS S.39
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
must install the ACF /TCAM V2 R3 Multisystem Networking Facility
feature. To take advantage of some of the functions provided by the
Multisystem Networking Facility, a user may install the feature in large,
multi-node single system environments.
ADVANCED COMMUNICATIONS FUNCTION
for NCP/VS (ACF/NCP/VS)
VERSION 1 RELEASE 2
5735-XX1
ADVANCED COMMUNICATIONS FUNCTION for TCAM
ACF/TCAM VERSION 2 RELEASE 4
5735-RC3
Advanced Communications Function for NCP /VS Version 1 Release 2
is for users of DOS/VS, OS/VS1, and OS/VS2 (MVS) that can provide
additional capabilities for problem determination, network operation and
data communications. ACF/NCP/VS R2 is designed to operate with
ACF/TCAM Version 2 and ACF/VTAM Version 1 R2.
ACF /TCAM Version 2 Release 4 offers significant extensions and
enhancements to TCAM customers in a single and multiple networking
environment. Advanced Communications Function for TCAM Version 2
Release 4 is a program product for users of OS/VS1 and OS/VS2
(MVS) that offers expanded network configurability, network management capability, enhanced queue recoverability, and improved
migration. To support multiple S/370 networks, a user must install the
ACF /TCAM V2 R4 Multisystem Networking Facility feature. With
multiple TCAMs a user may network in the same CPU as well as run
two or more copies of ACF ITCAM V2 R4.
VIRTUAL MACHINE/VTAM
COMMUNICATIONS NETWORK APPLICATION
VM/VCNA (5735-RC5)
The Virtual Machine/VTAM Communications Network Application
(VM/VCNA) provides the VM/System Product (VM/SP) user the
capability of using an SNA, BSC, SS or local terminal as an operator
console for a virtual machine. Support is included for Control
Program/Conversational Monitor System (CP /CMS) command
processing, CMS editor processing and VM full screen support.
VM /VCNA is an application program that provides an interface
between VM's console support and ACF/VTAM's or ACF/VTAME's
application program interface in order to support SNA. BSC, SS or local
devices as virtual machine consoles.
HOST COMMAND FACILITY (5735-XR1)
The Host Command Facility is a key program for distributed systems
that includes S/370, 4300, and 8100 Information Systems processors.
A host support program, the Host Command Facility gives a central
S/370 or 4300 terminal operator the capability to: Operate and control
SNA-connected 8100 Information Systems with DPPX or DPPX/SP as
the operating system ... Use nearly all operation and service functions
that are available at an 8100 location The exceptions are functions that
require manual intervention, such as tape mounting and diskette
insertion ... Perform the operator-oriented tasks related to DPPX or
DPPX/SP or DPCX problem determination and isolation.
ADVANCED DATA COMMUNICATION for STORES
RELEASE 5 (5735-XR2)
The Advanced Data Communication for Stores is a host S/370
application which provides support for batch communications between
the host system and individual controllerscin: 3650 Programmable Store
Systems ... 3650 Retail Store Systems ... 3660 Scanning and Key Entry
Supermarket Systems ... 3680 Programmable Store System.
HOST PREP LICENSED PROGRAM for SUPPORT of
DISTRIBUTED PROCESSOR CONTROL EXECUTIVE (DPCX)
RELEASES 4.1 and 5.0
5735-XR3
Host Prep provides host support for 8100/DPCX to OS/VS1 Release
7.0, OS/VS2 (MVS) Release 3.8, and DOS/VSE users (and to users of
all subsequent releases of these SCPs unless otherwise specified) on
S/370, 30XX and 4300 Processors. Included are Instruction Support,
Program Validation Services, Batch Data Exchange Services and
Subsystem Information Retrieval Facility for application programs using
functions offered with DPCX Version 1 Release 3 and DOSF Release 3.
ACF/SYSTEM SUPPORT PROGRAMS
VERSION 2 RELEASE 1.1
ACF /SSP (5735-XXA)
ACF/System Support Programs (ACF/SSP) Version 2 Release 1.1
provides generation and utility functions for users of ACF / NCP Version
2 and users of EP on 3705-11 and 3705-80 Communication Controllers,
plus ACF/NCP Version 2 for the 3725, and users of Emulation Program
(EP) on the 3725 Communications Controllers.
EMULATION PROGRAM for the 3725 (EP/3725)
5735-XXB
The Emulation Program for the 3725 (EP /3725) allow!> R channelattached 3725 Communication Controller to perform most of the
functions of a 2701 Data Adapter Unit and the 2702 or 2703 Transmission Control Units. It will operate only in the 3725 controllor, and will
not operate in the 3704 or 3705 controllers.
ADVANCED COMMUNICATIONS FUNCTION
for NCP/VS (ACF/NCP/VS)
VERSION 1 RELEASE 3
5735-XX1
Advanced Communications Function for NCP /VS Version 1 Release 3
is for users of DOS/VS, DOS/VSE, OS/VS1 and OS/VS2 (MVS) that
offers expanded network configurability, network management
capability and enhanced network recovery.
NETWORK OPERATION SUPPORT PROGRAM
5735-XX2 (DOS/VS, OS/VS)
The Network Operation Support Program is a program product which
operates with ACF /VTAM Version 1 as an application program under
the control of DOS/VS, OS/VS1 and OS/VS2 (SVS and MVS) and can
support programmed operator functions for ACF /VTAM Version 1
networks.
SYSTEM SUPPORT PROGRAMS FOR
ACF/NCP/VS VERSION 1 RELEASE 2
5735-XX3
System Support Programs for ACF /NCP /VS Version 1 Release 2 is for
users of ACF/NCP/VS V1 R2 under DOS/VS, OS/VS1, and OS/VS2
(MVS) that supports 3705-11 enhancements and provides enhanced
generation and utility functions for single or multiple S/370 networks.
System Support Programs for ACF /NCP /VS Version 1 Release 3
provides generation and utility functions for users of ACF /NCP /VS
V1 R3 under DOS/VS, DOS/VSE, OS/VS1 and OS/VS2 (MVS).
NETWORK COMMUNICATIONS CONTROL FACILITY
forVTAM, ACF/VTAM, ACF/VTAME, TCAM and
ACF/TCAM (DOS/VSE, OS/VS)
NCCF (5735-XX6)
The Netwc rk Communications Control Facility (NCCF) operates with
ACF/VTAM, ACF/VTAME or ACF/TCAM as an application program
under the control of DOS/VSE, OS/VS1 or OS/VS2 MVS. NCCF
provides a program base for communications network management
(CNM) by providing telecommunications access method services and
operating system services. With ACF/VTAM and ACF/VTAME, NCCF
contains, and is compatible with, those access method operator control
functions currently provided by the Network Operation Support
Program (NOSP). NCCF extends telecommunications access method
operator control to ACF /TCAM Version 2. NCCF provides communications network management application functions including: Network
operations, data services for problem determination, and communications network management (CNM) operator data security and auditing.
(A CNM operator is a person communicating with NCCF.) IBM-supplied
or user-written programs may use NCCF services to provide additional
functions of CNM beyond those provided by NCCF.
NETWORK TERMINAL OPTION
NTO RELEASE 1 (5735-XX7)
The Network Terminal Option extends the capabilities of ACF /NCP /VS
V1 R2 in 3705-1 and 3705-11 Communications Controllers to allow
access of the following non-SNA terminals through the Record Mode
Application program (SNA) interface in ACF/VTAM Version 1 Release 2
or ACF/VTAM Version 2: 2740 Communication Terminal mdl 1 nonswitched and switched ... 3232 Keyboard Printer mdl 51 - switched
and nonswitched ... 2741 Communication Terminal - nonswitched and
switched ... 6733 Typewriter Communication Module - switched and
nonswitched as a CPT-TWX 33/35 ... Western Union Teletypewriter
Exchanges Services (TWX mdl 33/35) - nonswitched and switched ...
World Trade Teletypewriter Terminal (WTTY) - nonswitched only. The
Network Terminal Option is available to users of the operating systems
as supported by ACF/VTAM R2.
NETWORK TERMINAL OPTION
NTO RELEASE 2 (5735-XX7)
The Network Terminal Option Release 2 (NTO 2) extends support to
ACF/VTAM Version 1 Release 3 and ACF/VTAM Version 2. For a
description of ACF/VTAM Version 1 Release 3 and ACF/VTAM
Version 2 see the program product pages. NTO 2 also supports the
ACF/NCP/VS Version 1 Release 3 and ACF/NCP Version 2 function.
-- ---------.:..:.: == ~ == ISG
-
PS S.40
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
NETWORK PROBLEM DETERMINATION APPLICATION
NPDA (5735-XXS)
The Network Problem Determination Application (NPDA) assists users
in performing communication network problem determination. N PDA
collects records of errors detected by a communication network and,
upon request, displays them at the user's terminal.
ADVANCED COMMUNICATIONS FUNCTION for NCP
(ACF/NCP) VERSION 2 for the 3705
5735-XX9
Advanced Communications Function for the Network Control Program
(ACF/NCP) Version 2 is a program for users of OS/VS1, OS/VS2
MVS, SSX/VSE and DOS/VSE that offers the capabilities of
ACF / NCP /VS Version 1, Release 3, plus improved diagnostic and
performance tools for 3705 Communications Controllers. ACF/NCP V2
is designed to operate in 3705-11 and 3705-80 Communications
Controllers, whether channel-attached to a host processor, or remotely
connected to a host processor by an SDLC link to another controller.
ACF/NCP V2 is generated using the ACF/System Support Programs
(ACF/SSP) Version 2 (5735-XXA).
ADVANCED COMMUNICATIONS FUNCTION for NCP
(ACF/NCP) VERSION 2 for the 3725
5735-XX9
Advanced Communications Function for the Network Control Program
(ACF/NCP) Version 2 for the 3725 is a program for users of OS/VS1,
OS/VS2 MVS and DOS/VSE that offers the capabilities of ACF/NCP
Version 2 for the 3705 plus reduced system generation time, enhanced
problem determination tools, error recording and availability. ACF/NCP
Version 2 for the 3725 is designed to operate with the 3725 Communications Controllers, whether channel-attached to a host processor, or
remotely connected to a host processor by an SDLC link to another
controller. ACF/NCP Version 2 for the 3775 is generated using the
ACF /System Support Programs (ACF /SSP) Version 2 Release 1.1
(5735-XXA).
DOS PL/I RESIDENT LIBRARY
5736-LM4
This J:?rogram is used in conjunction with the DOS PL/I Optimizing
Compiler (5736- PL1). For the complete compilation and execution of a
PL/I program, the following additional program products are required:
DOS PL/I Resident Library - 5736-LM4 (for link-editing) ... DOS PL/I
Transient Library - 5736-LM5 (for execution).
CONSOLIDATED FUNCTIONS ORDINARY II
CFO II (5736-N13)
The Consolidated Functions Ordinary " System represents a proven
~yst.ems approach to maintaining, processing and servicing individual
life Insurance contracts. CFO" takes advantage of the experience and
knowledge gained from the IBM '62 CFO system (1401-IL-02X).
Although CFO " is a new system, the successfully-proven logic
structure of the '62 CFO Daily Cycle and Periodic Update programs has
been maintained and enhanced in this CFO " system.
ALPHA SEARCH INQUIRY SYSTEM
5736-N14
Alpha Search Inquiry System is a terminal-oriented system for the
retrieval of name records through phonetic techniques. The Alpha
Search Inquiry System consists of a set of routines that create,
maintain, reorganize and provide terminal access to a file containing
customer names and customer numbers which reference other user
files. Depending on the environment in which the Alpha Search Inquiry
System is used, customer numbers may be synonymous with one or
more of the following terms: Account numbers ... policy numbers .. .
contract numbers ... certificate numbers ... subscriber numbers .. .
document numbers ... license numbers ... part numbers ... invoice
numbers. Phonetic encoding increases the user's ability to access the
alpha search record even though the exact spelling is not known. Thus,
the effects of transcription errors, partially illegible signatures on
correspondence and sound-alike names can be reduced.
DOS PL/I OPTIMIZING COMPILER
5736-PL1
The DOS PL/ I Optimizing Compiler is designed specifically for
generation of fast object programs. It provides a growth path for the
users of mdl 20 PL/I and the PL/I D (Version 4) compiler. Performance
is achieved through the incorporation of the best design features of a
number of well-proven compilers. Subroutine Libraries: A subroutine
library is required during link-editing of a compiler output module. A
second library is required for execution of the object program. Each
library is available as an IBM program product: DOS PL/I Resident
Library 5736-LM4 (for link-editing) ... DOS PL/I Transient Library
New
5736- LM5 (for execution). For a processor in which programs are
compiled but not link-edited or executed, only the compiler is required.
For a processor in which programs are link-edited but not compiled or
executed, only the resident library is required. For a processor in which
programs are executed but not compiled or link-edited, only the
transient library is required. The three products are available packaged
together (as 5736-PL3) or individually.
DOS RPG II
5736-RG1
RPG II is a programming language that performs a wide variety of
commercial data processing jobs. The RPG " language is an expanded
version of the present RPG language operating· under the Disk
Operating System. Compared with the previous DOS RPG, RPG "
offers performance improvement in two areas: Improved core efficiency
for object programs ... Improved throughput performance for process
bound programs. In addition to the performance improvements, many
new functions have been added to the RPG " language. These
functions make RPG ,,: Easier to use than the current DOS RPG ... More
flexible, so that the programmer can choose the method of coding
which is most suited to his needs ... More powerful, so that many
programs can be coded using RPG " which in the past were difficult or
impossible to code using RPG.
FARE QUOTE/TICKETING
5736-T11
The Fare Quote/Ticketing program is an enhancement in capability of
the Programmed Airline Reservation System (PARS). Operating in the
PARS environment, it enables airlines to rapidly, accurately and
automatically price and print, on demand, standard airline tickets based
on Passenger Name Record (PNR) information.
DATA BASE ORGANIZATION and MAINTENANCE
PROCESSOR (5736-XX4)
The Data Base Organization and Maintenance Processor establishes the
framework· for implementation of a data based information system.
This series of programs provides a flexibility of data organization that
enables: Elimination of redundant data and implied redundant file
update ... Reduction in application implementation costs, storage costs,
and processing costs ... Improved accuracy through single manual
recording of data at point of origin ... Availability of centralized,
consistent data to all organizational units on a timely, accurate basis.
The CICS feature and the DBOMP-CICS/DASF feature permit online
access and update of the data base from programs using CICS or
CICS/VS to control the data communications environment.
MVS INFORMATION DISTRIBUTION
WORKSTATION SUPPORT
VERSION 1 RELEASE 1
5740-AMA
MVS/lnformation Distribution Workstation Support provides batchoriented remote communication functions for the 6670 Information
Distributor with the systems network architecture (SNA) feature. The
product provides transmission, routing, scheduling, command and
message functions that are specifically tailored to the features and
communication protocols of the 6670 and that support all data streams
and media of the 6770.
SEQUENTIAL ACCESS METHOD-EXTENDED (SAM-E)
5740-AM3
Sequential Access Method-Extended (SAM-E) uses improved buffer
scheduling for QSAM, and EXCPVR instead of EXCP for all BSAM and
QSAM direct access and VIO operations, except BDAM WRITE/LOAD.
In the exception case, the current implementation is used. Measurements of MVS batch test environments have shown that SAM-E can
increase batch throughput by up to 5% for either MVS or MVS/SE
Systems. Users with batch workloads characterized by heavy QSAM
DASD usage and DASD contention can achieve greater improvements.
Measurements of such workloads have shown improvements in the
range of 9 to 14%.
INTERACTIVE PERSONNEL SYSTEM
RELEASE 1 Modification Level 2
IMS/VS and CICS/OS/VS (5740-AM4)
The Interactive Personnel System is designed to assist personnel
functions in performing their required tasks efficiently and competently.
Online inquiry, online update, as well as batch processing capabilities
are offered. The data organization methods of the Information
Management System/Virtual Storage. (IMS/VS) are used for data
storage and retrieval. The online capability is made possible through
the use of either the Data Communication (DC) Feature of IMS/VS or
------- - - - ----=
ISG
Do not reproduce without written permission
-~~§:
the
Customer
(CICS/OS/VS).
Information
PS S.41
PRODUCT SUMMARY - SOFTWARE
Control
System/Virtual
Storage
DATA FACILITY/DEVICE SUPPORT
OS/VS1 (5740-AM6) - RELEASE 1.0
OS/VS2 MVS (5740-AM7) - RELEASE 1.4
OS/VS2 MVS (5740-AM7) - RELEASE 1.5
Data Facility / Device Support (DFDSS) provides the data management
support for the 3380 Direct Access Storage, a high-speed, large
capacity. non-removable media direct access storage device (DASD)
and the 3375, a new mid-range direct access storage device for
intermediate and large system users, providing the capacity, performance, low cost and data granularity to meet a wide range of application
requirements. These new devices offer significant price/performance
improvements over current DASD products. Additionally, for both
current users of large DASD, and 3375 and 3380 users, access to a
large DASD volume table of contents (VTOC) is improved via an
optional index to the VTOC. Installation management of DASD space is
improved by providing for installation exits in the direct access device
space management (DADSM) routines. Further, DFDS provides
compatibility mode support for the 3800 Printing Subsystem mdl 3.
Data Facility / Device Support Release 1 Modification Level 5 is
separately orderable. It provides support for the 3880 mdl 11 and mdl
13 cache Storage Control. DFDS 1.5 requires DFDS 1.4 as a base.
ACCESS METHOD SERVICES
CRYPTOGRAPHIC OPTION
RELEASE 1 Modification Level 0
5740-AMS
The Access Method Services Cryptographic Option for OS/VS2 MVS
and OS/VS1 extends the Access Method Services REPRO function to
give the user the ability to encrypt and decrypt data using a software or
hardware version of the National Bureau of Standards Data Encryption
Standard (DES). To encipher and decipher the data and provide key
management functions, the access method services REPRO command
uses the services of either the Programmed Cryptographic Facility
program (5740-XY5) using software for OS/VS2 MVS and OS/VS1, or
the Cryptographic Unit Support program (5740-XY6) using hardware
for OS/VS2 MVS utilizing the 3848 Cryptographic Unit.
OS/VS COBOL COMPILER AND LIBRARY (5740-CB1)
OS/VS COBOL LIBRARY ONLY (5740-LM1)
The OS/VS COBOL Compiler and Library operates in a virtual storage
environment under control of OS/VS1, OS/VS2; OS/VS1, OS/VS2
under VM/370; or the Conversational Monitor System (CMS) of
VM/370. The Library is required for execution of compiled programs.
The compiler and library support American National Standard COBOL
X3.23-1968* and X3.23-1974* and add several new features to those
contained in previous IBM OS Full ANS COBOL Compilers.
3650 PROGRAMMABLE STORE SYSTEM
PSS COBOL COMPILER
DOS/VS (5746-CB2) OS/VS (5740-CB2)
The 3650 Programmable Store System COBOL Compiler program
product is a derivation of the base S/370 DOS/VS and OS/VS COBOL
compilers which is designed for use with the 3650 Programmable Store
Systems. It allows users of Programmable Store Systems to write
batch type programs in COBOL. It executes in a S/370 and compiles
the programs into SPPS II code. These SPPS II programs are then
processed according to normal procedures for execution in the 3651
store controllers.
CHANGE MANAGEMENT TRACKING (CM/T) 5740-DC1
CHANGE TRACKER (CT) 5740-DC4
DP ACCOUNTING for IMS/VS (DPA) 5740-DC2
Change Management/Tracking, Change Tracker, and DP Accounting
for IMS/VS, together constitute an information system that covers
three important aspects of data processing management: Change
Management/Tracking (CM/T) keeps an orderly record of changes
made to the installation's production libraries. Use of this record can
reduce problem determination time and improve availability. The
change tracking function of CM/T is also available as a separate
program product - the Change Tracker (CT) - which can be licensed
separately for each additional processor in a multiple-processor
installation ... DP Accounting for IMS/VS (DPA) provides IMS/VS
DB/DC installations with an equitable and consistent charge-back
system based on IMS transaction usage. The above programs all use
source information from the logs of the OS/VS System Management
Facilities (SMF) and/or the Information Management System/VS
(IMS/VS). Therefore, although they are available as separate program
products, they are built on a common data base structure and share
similar data base input, modification, and reporting functions. The
above programs run under OS/VS1 and OS/VS2 (SVS and MVS). On
Aug 83
New
OS/VS2 systems, they can (with the exception of the Change Tracker)
be executed online under TSO.
SERVICE LEVEL REPORTER (SLR)
RELEASE 2 (5740-DC3)
SLR provides DP management with information to help manage the DP
installation. Many areas are covered by this single product - VS1,
MVS, TSO, CICS/VS, IMS/VS. SLR is a post-processor of system log
data, and information is collected in one data base and presented in
readily understandable format. Graphics and color can be used to
present information, thereby giving a versatile, easily-used, pictorial
display capability for use by DP professionals at all levels. An SLR
objective is to minimize the number of printed reports presented to
management, by presenting the 'right' information in the 'right' format,
and supplementing printed reports with online inquiries to the SLR data
base when necessary.
PROGRAM CUSTOMIZER for the
3600 FINANCE COMMUNICATION SYSTEM
(PC/3600)
DOS/VS (5746-F11)
OS/VS (5740-F11)
Program Customizer for the Finance Communication System (PC/3600)
generates a program for the 3601 Financial Communication Controller
from specifications prepared by users. Specification sheets from users
request their requirements for the transactions to be executed in the
3601. These specifications cover the key aspects of the program to be
generated: The input which makes up the transactions. '" The
processing to be done. ... The information to be retained in the 3601
when the transactions are executed ... The telecommunications desired
between the 3601 and a S/370 computer '" The output to be printed or
displayed on terminal devices of the 3600 Finance Communication
System.
ELECTRONIC PAYMENT SYSTEMS SUPPORT/
DEPOSIT PROCESSING-OS/VS
5740-F13
The Electronic Payment Systems Support/Deposit Processing-OS/VS
program provides the OS/VS user with application support for the 3895
Document Reader/Inscriber. Under program control, the 3895 optically
reads data from up to three OCR fields, including the hand or machineprinted amount on a check or deposit slip, and inscribes that amount on
the ABA code line.
DIRECT S.W.I.F.T. LINK (DSL)
RELEASE 2 Modification Level 0
CICS/DOS/VS (5746-F14)
CICS/OS/VS (5740-F15)
IMS/VS (5740-F16)
Direct S.W.I.F.T. Link is designed to assist the user of CICS/DOS/VS,
CICS/OS/VS or IMS/VS, respectively, to directly link to the network of
S.W.I.F.T. (Society for Worldwide Interbank Financial Telecommunication s.c.).
3614/3624 CONSUMER ONLINE
TRANSACTION SYSTEM
RELEASE 2 Modification Level 0
OS/VS (5740-F51) DOS/VS (5746-F57)
The 3614/3624 Consumer Online Transaction System (COLTS)
provides a comprehensive level of support for the 3614/3624
Consumer Transaction Facility (CTF). This program consists of two
major components: Host programs which are written in Assembler
language and a 3600 Finance Communication Controller (FCC)
application program written in the Finance Communication language.
The host program is designed as a Virtual Telecommunications Access
Method (VTAM) application testing vehicle. It is provided so that a user
can perform a basic validation of the online capabilities of the COLTS
3600 controller application program. For 3602 customers, a batch
program is provided to generate keys for customer account number
entries which will comprise the 3602 disk-resident authorization file.
The 3600 application program is designed to support CTFs attached to
a 3600 Finance Communication controller during periods of host
availability or unavailability.
CAPACITY PLANNING AND OPERATION SEQUENCING
SYSTEM - EXTENDED (CAPOSS E)
OS/VS RELEASE 1,0 (5740-M41)
DOS/VS RELEASE 1.0 and 1.1 (5746-M41)
The Capacity Planning and Operation Sequencing System-Extended
(CAPOSS-E) is an extension of the Capacity Planning and Operation
Sequencing System (CAPOSS) 5736-M41 (DOS). CAPOSS-E is
--.----- -------':"=:::S'V'5: ISG
Do not reproduce without written permission
PS S.42
PRODUCT SUMMARY - SOFTWARE
designed to be used whenever a large number of activities must be
allocated to limited capacity resources. Some frequently encountered
problems when allocating resources include working within tight
schedules, having some resources overloaded and some idle, having
too much work in process planning and allocating activities at the shop
level according to plans and priorities set at a higher level and
integrating the capacity planning system into the existing data
processing operations. These problems are interrelated, and any
capacity planning system must achieve a compromise between the
factors to find the optimum allocation of resources. CAPOSS-E brings
computer assistance to capacity planning with processing based on a
wide variety of factors defined by the user. Some areas of application
for CAPOSS-E are in manufacturing (assembly and repair shops), in
project planning for motor manufacturing and the aerospace industry, in
process industries, including textile production, in the food industry and
in public services.
S/370 AUTOMATICALLY PROGRAMMED TOOL
INTERMEDIATE CONTOURING (5740-M52)
ADVANCED CONTOURING (5740-M53)
VERSION 1 Modification Level 3
These program products form a modular, upward-compatible family of
Numerical Control Processors developed for machining operations from
point-to-point through the full three-axis contouring.
OS/VS RPG II RELEASE 1
5740-RG1
OS/VS RPG " is a programming language that can be used to create
programs to perform a wide variety of commercial data processing jobs.
OS/VS RPG " is based on the DOS/VS RPG II Release 3 compiler and
is a powerful, easy-to-use programming language on OS/VS systems.
OS/VS RPG " Release 1 runs under the control of OS/VS1 Release 7.0
and OS/VS2 Release 3.8 (MVS) with or without MVS/SP installed.
OS/VS SORT/MERGE REL 5
5740-SM1
The OS/VS Sort/Merge (5740-SM1) provides a high-performance
disk and tape sort that runs under the S/370 OS and OS/VS operating
systems, MVS, VS1, SVS, MVT and MFT. It also executes under
VM/370.
DIRECT ACCESS STORAGE DUMP RESTORE
DASDR (5740-UT1)
DASDR provides high-speed dump and restore of data on directaccess devices by volume, selected data set, or track. Data can be
dumped from and restored to the 3330/3333 mdls 1 and 11,
3340/3344 (except under OS/MVT), and the 3350 devices. The
DASDR program product is composed of two programs: A system
utility program (DRWDASDR) and a stand-alone program
(DRUDMPRS).
DATA FACILITY DATA SET SERVICES (DFDS)
RELEASE 2 (5740-UT3)
Data Facility Data Set Services assists OS /VS users with protection
and recovery of information on direct access storage devices, including
the new 3380 and 3375 and 3850 Mass Storage System (MSS) virtual
volumes and 3880 mdl 13, by providing full volume, partial volume and
data set dump and restore facilities on a system basis and full and
partial volume restore on a stand-alone basis.
S/370 ENERGY MANAGEMENT SYSTEM
5740-U11
The S/370 Energy Management System provides the Electric Utility
Industry with a modular set of supervisory and application programs to
aid in the control of medium to large power networks.
CONVERSATIONAL and INTERACTIVE PROJECT
EVALUATION and CONTROL (CIPREC)
DOS/VSE (5746-XC3)
OS/VS and VM/370 CMS (5740-XC3)
CIPREC is a set of programs designed to aid management in the
planning and controlling of projects using the critical path method as a
base. Release 2 has IMS/VS and DL/I support, in addition to the
environments supported by Release 1.
Aug 83
New
DEVELOPMENT MANAGEMENT SYSTEM/CICS/VS
RELEASE 4
DMS/CICS/VS-OS (5740-XC5)
DMS/CICS/VS-DOS (5746-XC4)
Development Management System/CICS/VS (DMS/CICS/VS) is an
advanced application generator designed to simplify the implementation
of interactive data processing applications. The pre-programmed
display management, file and data base management, and message
handling facilities of DMS/CICS/VS make it possible to implement
online applications with little or no traditional programming.
DMS/CICS/VS does this by providing preprogrammed facilities that
perform functions that are common to most online applications such as:
Screen and function selection, screen display, multi-screen paging, and
message routing between display stations. Preprogrammed data base
and file functions for searching, browsing, inquiring, data entry, record
adding and updating are provided as well as other functions that
regularly appear in online programs.
MVS/SYSTEM EXTENSIONS
5740-XE1
MVS/System Extensions is an enhancement to MVS offering increased
performance (through control program improvements) and installation
management and control enhancements to MVS users. The program
product is available for the 3031, 3032 and 3033 Processors, and for
the S/370 mdl 158 and 168 processors with the S/370 Extended
Feature installed. (See the S/370 Extended Feature announcement
letter for details and any necessary RPQs.) Release 1, Modification
Level 1 (R 1.1) of the MVS / System Extensions provides performance
enhancements and some control improvements. Release 2, Modification Level 0 (R2.0) of the MVS/System Extensions replaces Release 1
and maintains its performance and control enhancements. In addition,
Release 2 makes new installation management functions available in the
SMF, SRM and operator-message handling areas.
OS/VS2 MVS TSO 3270 EXTENDED DISPLAY
SUPPORT SESSION MANAGER
RELEASE 2 Modification Level 0 (5740-XE2)
The TSO Session Manager provides a full-screen display facility. It
complements the full-screen functions of the TSO 3270 Display
Support and Structured Programming Facility program. The combination of these two products provides full-screen 3270 display support
for the entire TSO environment.
MATHEMATICAL PROGRAMMING SYSTEM
EXTENDED/370 (MPSX/370)
MIXED INTEGER PROGRAMMING (MIP/370)
5740-XM3 (MPSX/370, OS/VS & VM/370 with CMS)
Feature (MIP/370, OS/VS and VM/370 with CMS)
5746-XM2 (MPSX/370, DOS/VS and DOS/VSE)
Feature (MIP/370, DOS/VS and DOS/VSE)
MPSX/370 and its optional feature MIP /370 are based on their
predecessors MPSX (5734-XM4) and its MIP feature. MPSX/370 and
MIP/370 provide new and enhanced capabilities and improved
performance when compared to MPSX and MIP. The scope of
operational models that can be optimized by MPSX/370 and MIP/370
has been extended.
PROJECT ANALYSIS AND CONTROL SYSTEM
PROJACS DOS/VS (5746-XP1)
PROJACS OS/VS (5740-XP1)
PROJACS is a set of programs designed to aid management fulfill its
responsibilities in the planning and controlling of projects using the
critical path method.
HIERARCHICAL STORAGE MANAGER (HSM)
RELEASE 3.1
5740-XRB
The Hierarchical Storage Manager is valuable in helping customers to
save and manage space in Total Storage Management environments.
HSM supports the 3380, 3375, 3350 and 3330 Direct Access Storage,
3420 Tape, and MSS storage devices. With the new DASD conversion
function, HSM can 'move' data from current HSM-supported DASD to
the 3380 and 3375. Data set movement within the hierarchy is initiated
automatically by HSM, based upon installation-specified parameters
and data set reference in batch and interactive environments. Data set
movement can be initiated manually by operator and TSO user
commands. HSM executes as a continuously running task under
OS/VS2 MVS Release 3.8 and subsequent releases unless otherwise
stated. HSM Release 3.1 operates in MVS/370 environments and in
MVS/XA environments below the 16-megabyte line. No parameter
changes are required to use HSM in MVS/XA environments, or in
multihost MVS/XA and MVS/370 environments. User-written HSM
- - --------= ::-:. :5~~ ISG
Do not reproduce without written permission
PS S.43
Aug 83
PRODUCT SUMMARY - SOFTWARE
exit algorithms that will be used in MVS/XA environments must be
link-edited to remain below 16 megabytes.
STORAGE AND INFORMATION RETRIEVAL SYSTEM/
VIRTUAL STORAGE (STAIRS/VS)
OS/VS (5740-XR1)
The conventional method for indexing documents in a specialized
information system or a library has been fatiguing and cumbersome
work for specialists. Today, documents, articles from periodical
magazines, patent texts, and their abstracts, can be converted into
machine-readable form for entry into a computer system. Once
entered, the material can be used during subsequent searches, using
the language of the technical area involved, to retrieve the desired
documents. The full texts, or their associated bibliographic identifiers
(such as title, author, publisher, and source), make up a dynamically
growing file of data which can be searched by specialists in law,
engineering, medicine, sales, marketing, management, and other fields,
to retrieve material of interest pertaining to their own spheres.
S/370 DECISION TABLE TRANSLATOR
OS/VS for PL/I and COBOL
DECTAT (5740-XR4)
Decision tables are a clear and standard way of displaying logic; they
are used for definition and analysis of applications. DECTAT extends
the scope of decision tables to the programming and documentation of
computer applications, permitting the programmer to use decision
tables in a PL/1 or COBOL program. DECTAT translates every decision
table encountered in a program into an optimized set of PL/1 or COBOL
statements. Processing, compilation, and execution of the object
program can be done automatically through the use of control cards.
The main advantages in using DECTAT are: Simplicity and ease of use
... Elimination of block diagrams and flowcharts ... Reduction of
programming cycle time ... Easy modification and updating of programs
obtained.
S/370 STORAGE AND INFORMATION RETRIEVAL
SYSTEM - DATA LANGUAGE/ONE (STAIRS-DL/n
OS/VS (5740-XR7)
The conventional method for indexing documents in a specialized
information system or a library has been fatiguing and cumbersome
work for specialists. Today, reports, speeches, legal and other files,
articles from periodical magazines, patent texts, and their abstracts, can
be converted into machine-readable form for entry into a computer
system. Once entered, the material can be used during subsequent
searches, using the language of the technical area involved, to retrieve
the desired documents. The full texts, or their associated bibliographic
identifiers (such as title, author, publisher and source), make up a
dynamically growing file of data which can be searched by specialists in
law, engineering, medicine, sales, marketing, management and other
fields to retrieve material of interest pertaining to their own spheres.
NETWORK JOB ENTRY FACILITY FOR JES2
NJE FOR JES2 (5740-XR8)
JES2 with the NJE facility is upward compatible from JES2 and
provides additional functional enhancements. It supports the interconnection of NJE for JES2 configurations via binary synchronous
communications (BSC) lines and channel-to-channel (CTC) adapters.
The purpose is to exchange job input, job system output (SYSOUT)
data, NJE for JES2 operator commands, and operator messages
between NJE subsystems operating on OS/VS2 MVS Release 3.7. The
job input and SYSOUT distinctions are controlled by installation
provided defaults; JOB control statements, and/or operator commands.
VSTSIO
5740-XR9
VS TSIO provides the VS APL (Release 2) user, running under VSPC,
with many of the data management facilities of the OS/VS operating
systems. VS TSIO consists of an Auxiliary Processor and several
associated works paces. The Auxiliary Processor enables users to
perform input and output operations on SAM, PAM and BDAM files. If
authorized, users can create OS /VS sequential, direct or partitioned
data sets, create SYSOUT data sets and submit batch jobs. The
workspaces facilitate the use of the Auxiliary Processor, support a file
system of APL objects and .perform translations to and from various
data representations in files.
TELEPROCESSING NETWORK SIMULATOR
RELEASE 5.0
TPNS (5740-XT4)
Teleprocessing Network Simulator (TPNS) is a telecommunications
testing package that enables a user to test and evaluate his application
programs before actual terminal installation. The purpose of TPNS is to
provide controlled generation of message traffic into a telecommunica-
New
tions subsystem or application through the use of processing rather
than by large amounts of terminal hardware and terminal operator time.
TPNS provides the ability to simulate a specified network of terminals
and their associated messages, allowing the user to alter network
conditions and message loads during a run. Thus, TPNS can be used to
stress-test telecommunications application programs with volume
messages to evaluate the reliability and approximate performance
characteristics under expected operating conditions.
TSO COMMAND PACKAGE
5740-XTS
The TSO Command Package program product augments the function
available to the OS/VS2 (MVS) TSO user, and facilitates the use of
TSO commands in background mode. The EDIT Recovery facility
provides the capability of recovering data entered during an abnormally
terminating EDIT session. Miscellaneous TSO Command Package
Functions provided include additional default values permitted to be
supplied in the TSO user's User Attribute Data Set (UADS) entry, and
subcommand and keyboard modifications.
TSO Command Package also increases the range of background
processing by providing modifications facilitating the use of existing
TSO commands in background mode.
TSO 3270 DISPLAY SUPPORT and
STRUCTURED PROGRAMMING FACILITY (SPF)
VERSION 2.2 (5740-XT8)
Version 2.2 of SPF includes functional enhancements, as well as the
ability to operate with the 3276 and 3278 Display Stations. SPF is a
program development tool designed to take advantage of the characteristics of 3270 Display Terminals and to increase productivity in the
TSO environment for users of both structural and conventional
programming techniques.
------- ------_.---- - ----------- ISG
Do not reproduce without written permission
PS S.44
Aug 83
PRODUCT SUMMARY :- SOFTWARE
OPERATIONS PLANNING AND CONTROL (OPC)
RELEASE 3.0 (5740-XT9)
OPC provides data processing management with a system for planning,
controlling and automating the handling of batch production in the
operations department. Both long range and short range planning may
be automated for all pre-processor, processor and post-processor
workstations, as required by each individual installation. The workflow
through the data center is monitored in real time. The status at any
work station, or of any application anywhere in the center, is immediately available to the production control personnel via color or
monochrome terminals. Error prone and repetitive operator tasks, such
as ensuring that jobs are run in the correct order, submitted at the right
time, etc., are automated by OPC.
TELECOMMUNICATION CONTROL SYSTEM
ADVANCED FUNCTION (TCS-AF)
5740~XXD
Telecommunications Control System - Advanced Function (TCS-AF),
based on Telecommunications Access Method (TCAM), provides the
user with the facilities to implement a high function single or multicomputer teleprocessing system. While TCS-AF capabilities can enhance a
single CPU TCAM or TCAM/VTAM System, TCS-AF is primarily
intended for users with multiple online VS systems, who need a
multicomputer networking capability to communicate between terminals
and applications in separate systems.
DB/DC DATA DICTIONARY
DOS/VS (5746-XXC) - OS/VS (5740-XXF)
The DB/DC Data Dictionary is a central collection of information about
data resources that are needed for efficient data management. The
DB/DC Data Dictionary improves the manageability of a data processing installation by storing, processing and reporting on definitions,
descriptions and relationships of data. This document uses the name
Dictionary when referring to either DB/DC Data Dictionary program
product unless otherwise noted.
OS/VS DB/DC DATA DICTIONARY
VERSION 1 RELEASE 5
5740-XXF
The OS/VS DB/DC Data Dictionary is a central collection of information about data resources that are needed for efficient data management. The OS/VS DB/DC Data Dictionary improves the manageability
of a data processing installation by storing, processing and reporting on
definitions, descriptions and relationships of data. This document uses
the name Dictionary when referring to either DB/DC Data Dictionary
program product unless otherwise noted.
RESOURCE ACCESS CONTROL FACILITY
RACF (5740-XXH)
RACF Release 4 provides the checking needed to assist an installation
in controlling user access to applications, permanent DASD data sets,
tape and DASD volumes, CICS/VS and IMS/VS transactions and
transaction groups, TCAM, VTAM and BTAM terminals defined to TSO
or IMS/VS and user-defined resources and resource groups. RACF
will perform user identify verification when batch (JES2 or JES3), IMS
and TSO users enter the system and check the authorization of. users
and user groups to DASD data sets and other protected resources
based upon this verified identity. Access authorization information is
maintained on one or more DASD data sets that can be shared between
independent (MVS) operating systems for which RACF is licensed.
CUSTOMER INFORMATION CONTROL SYSTEM
DOS/VS (5746-XX3) - OS/VS (5740-XX1)
These programs, together with the previous versions of CICS
(CICS/DOS-ENTRY (5736-XX6), CICS/DOS-STANDARD (5736-XX7)
and CICS/OS STANDARD VERSION 2 (5734-XX7)), form an upward
compatible family of data base/data communication (DB/DC) products
providing a common application interface. They facilitate the implementation of terminal-oriented applications and together provide an
upward migration path between versions and releases of CICS on the
same operating system and between operating systems.
INFORMATION MANAGEMENT SYSTEM
IMS/VS (5740-XX2)
Information Management System/Virtual Storage (lMS/VS) Version 1
is a Data Base/Data Communication (DB/DC) program. IMS/VS
supports user-written batch processing and teleprocessing applications. Batch and teleprocessing applications may execute concurrently
or separately. IMS/VS provides: Data Base management services
which support the implementation of mUltiple applications using a
common data base ... Data Communications management services
which support the implementation of multiple terminal-oriented
applications using a common data base.
New
GENERALIZED INFORMATION SYSTEM/
VIRTUAL STORAGE (GIS/VS)
5740-XX7
GIS/VS is designed to enable the programmer or the non-data
processing professional to maintain and extract information on a timely
basis from an installation'S data base. This is made possible by the use
of a generalized high-Ievellanguagewhich is easy to learn yet powerful
enough to handle complex multi-file data requests with extensive logic
and computational requirements.
In conjunction with IMS/VS
(5740-XX2), GIS/VS can provide an integrated information system
which uses the flexibility and power inherent in these two complementary DB/DC systems. Non-technical users of the data processing
facility can formulate their own data requests and enter them directly
into the computer either on a batch basis or via a remote IMS/VS
terminal. As a result, the programmer work load and associated costs
can be substantially reduced, and the total turnaround time normally
required with the development, testing and execution of a reporting
application or a one-time program can be drastically cut.
S/370 PLANNING, CONTROL AND DECISION
EVALUATION SYSTEM/INTERACTIVE
PLANCODE/I
DOS/VS (5746-XX9)
OS/VS (5740-XX8)
PLANCODE/I is a terminal-based application which provides facilities
for the building and implementation of business planning models by
means of a plan simulation language. Functions are included to provide
for the production of consolidated plans and to perform 'what if' type
sensitivity analysis.
S/370 PLANNING, CONTROL AND DECISION
EVALUATION SYSTEM/STANDARD
PLANCODE/S
DOS/VS (5746-XXA) - OS/VS (5740-XX9)
PLANCODE/S is an application program which allows the building of
Business Plans and Budgets, defined by the user, and the consolidation
of these different Plans and Budgets at divisional or corporate levels.
These plans and budgets permit the financial evaluation of the
consequences of management decisions. In addition, PLANCODE/S
enables the user to build a Budgetary Control application measuring
actual results against planned objectives.
CUSTOMER INFORMATION FACILITY/VS
5740-XYB (lMS/VS)
5740-XYC (CICS/OS/VS)
5746-XXS (CICS/DOS/VS)
Customer Information Facility/VS Release 1 Modification Level 0 is a
new set of application programs for the management and control of
customer related data in a Financial Institution. This system improves
the efficiency of a Financial Institution by providing a central data base
that contains all customer descriptive data, thus eliminating the
requirement of repeating this data in multiple account files or data
bases.
AUTOMATED OPERATOR FACILITY (AOF)
RELEASE 1, Modification Level 0
5740-XYD
The Automated Operator Facility is a transaction-driven data base/data
communication program that runs as an application under IMS/VS
Version 1, Release 1, Modification Level 5, with the Automated
Operator Interface (AO/) function. AOF improves the operational use of
IMS/VS in the data communication environment, and it can also
improve the availability of service to IMS/VS application users by
re-establishing the system more readily following shutdowns.
OS/VS1 INFORMATION DISTRIBUTION
WORKSTATION SUPPORT
5740-XYE
OS/VS1 Information Distribution Workstation Support provides RJE
support for the 6670 Information Distributor (SDLC Version only). The
6670 users can submit jobs and data to an OS/VS1 host for processing, and receive at the 6670 job output, documents, letters and variable
data generated at the OS/VS1 host. This output at the 6670 can be
processed or merged with constant data such as the body of a letter or
report, and printed on cut sheet paper or recorded on magnetic cards.
------- ----:: - -~~§: ISG
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
SCREEN DEFINITION FACILITY
CUSTOMER INFORMATION CONTROL SYSTEM
SDF/CICS RELEASE 3 Modification Level 0
OS/VS (5740-XYF) - DOS/VSE (5746-XXT)
Screen Definition Facility / Customer I nformation Control System
(SDF /CICS) is an online application development tool for the CICS/VS
application programmer who wants to define or edit maps and map sets
for the CICS/VS Basic Mapping Support (BMS). The online operation
and the ease-of-use oriented functions of the program enhance
productivity in map and map set development and maintenance.
MASS STORAGE SYSTEMS EXTENSIONS (MSSE)
RELEASE 1 (5740-XYG)
Mass Storage System Extensions introduces additional space
management, data management, and problem determination capabilities for users of the 3850 Mass Storage System. This program can be
used with OS/VS2 Release 3.8 (MVS) or OS/VS1 Release 6.7 (VS1).
DISTRIBUTED OFFICE SUPPORT SYSTEM/370
RELEASE 1 Modification Level 0 (5740-XY9)
DISTRIBUTED OFFICE SUPPORT SYSTEM/3730
RELEASE 1 Modification Level 0 (5740-XYK)
The Distributed Office Support System provides document handling
extensions to the 3730 Distributed Office Communication System
(abbreviated to 3730 System in this document). It operates in an
OS/VS
environment
under
the
Information
Management
System/Virtual Storage (lMS/VS) or the Customer Information Control
System/Virtual Storage (CICS/VS) and offers both interactive and
batch communication between 3730 systems and a host system such
as the S/370, the 3031, 3032 or 3033 processors or the 4300
processors. Significant capabilities of the Distributed Office Support
System include: Host document filing with indexing ... filed document
search and retrieval... filed document access protection ... message
switching between users of the same or different 3730 ... submission of
batch jobs to the host system from a 3732 terminal.
ADVANCED TEXT MANAGEMENT SYSTEM - III
ATMS-III FORMATTER FEATURE
RELEASE 1
ATMS-Ill/OS/VS (5740-XYL)
ATMS-Ill/DOS/VS (5746-XXU)
The Advanced Text Management System-III (ATMS-III) is a conversational text processing system designed to enable a terminal user to
enter, edit, store, format, proofread and display textual material in an
efficient manner. ATMS-III is based on, and is an extension to,
previous versions of the ATMS and ATMS-II program products.
ATMS-III runs under control of CICS/VS (5740-XX1 for CICS/OS/VS
and 5746-XX3 for CICS/DOS/VS) Version 1 Release 4.0, and
subsequent releases, unless otherwise identified. Because ATMS-III
executes as a CICS/VS application program. it is capable of being
multi-tasked along with other CICS/VS applications. ATMS-III offers
direct interfacing with the SCRIPT /VS Formatter of the Document
Composition Facility (5748-XX9) or a separate ATMS-III Formatter
Feature, and asynchronous DASD peripheral processing which may be
used for archiving in conjunction with the Document Library Facility
(5748-XXE).
MVS/SYSTEM PRODUCT-JES3
MVS/SP-JES3 RELEASE 1 (5740-XYN)
MVS/System Product-JES3 (MVS/SP-JES3) Release 1 provides all
the performance and functional benefits of MVS/System Extensions
(5740- XE 1) and significant new enhancements. MVS / SP-J ES3
Release 1 is available for the 4341 with ECPS:MVS installed, for the
3031, 3032, 3033 Processors and on the S/370 mdl 158 and 168
Processors with the S/370 Extended Feature installed.
MVS/SYSTEM PRODUCT-JES3
MVS/SP-JES3 RELEASE 2 (5740-XYN)
MVS/System Product-JES3 Release 2 (MVS/SP-JES3 R2) incorporates all of the functional benefits of MVS/System Product-JES3
Release 1 and, in addition, provides functional and device support
enhancements to the MVS Base Control Program and JES3. These
enhancements offer an installation opportunities to reduce the system
virtual storage requirements of system components and major
subsystems, provide new facilities in the areas of multi-system support
and operations management, as well as providing general functional
and device support enhancements.
PS S.45
Aug 83
New
MVS/SYSTEM PRODUCT-JES3
MVS/SP-JES3 RELEASE 3 (5740-XYN)
MVS/System Product-JES3 Release 3 provides all of the functions of
MVS/System Product-JES3 Release 2 together with: The ability to
achieve new levels of capacity and responsiveness on 3033 processors
via performance improvements implemented in conjunction with the
3033. E~tension Feature; support for the Extended Addressing Feature,
permitting up to 32 megabytes of addressable storage on 3033, 3081,
3083 and 3084 processors, thereby providing potential for further
capacity and responsiveness; significant improvements in System RAS;
extensions to the reconfiguration and recovery aspects of Global
Resource Serialization; and the potential further savings in the system
virtual storage requirements. RMF support for MVS/System ProductJES3 Release 3 is provided by a feature for RMF Version 2 Release 4.
MVS/SYSTEM PRODUCT-JES3
VERSION 1 RELEASE 3.1
MVS/SP-JES3 (5740-XYN)
MVS/SP-JES3 Version 1 Release 3.1 is a JES3-only update to
MVS/SP-JES3 Version 1 Release 3. It consists of a complete
replacement for the JES3 component in MVS/SP-JES3 Version 1
Release 3. The JES3 component of MVS/SP-JES3 Version 1 Release
3 provided a generally compatible replacement to the JES3 Release 3
(SU 26) product, together with the functions of the JES3 3800
Enhancement.
DATA FACILITY EXTENDED FUNCTION (DFEF)
RELEASE 1 (5740-XYQ) (OS/VS2 MVS)
Data Facility Extended Function Release 1 consists of the following: A
functional replacement for the VSAM and OS (CVOl) catalogs, to be
called the Integrated Catalog Facility ... additional extensions to VSAM.
The DFEF Integrated Catalog Facility may be used to replace all catalog
functions and facilities.
IBM DATABASE 2 (DB2) RELEASE 1
5740-XYR
IBM Database 2 (DB2) is IBM's relational data base management
system program product for the MVS/XA and MVS/370 environments.
It may coexist with and complements Information Management
System/Virtual Storage Version 1 Data Base System in these
environments.
MVS/SYSTEM PRODUCT-JES2
MVS/SP-JES2 RELEASE 1 (5740-XVS)
MVS / System Product-J ES2 Release 1 provides all the performance
and functional benefits of MVS/System Extensions (5740-XE1) and
significant new enhancements. MVS/SP-JES2 Release 1 is available
for the 4341 with ECPS:MVS installed, for the 3031, 3032, 3033
Processors and on the S/370 mdl 158 and 168 Processors with the
S/370 Extended Feature installed. Note: MVS/System Product
(MVS/SP) is a generic term referring to announced releases of
MVS/System
Product-JES2
(5740-XYS)
and
MVS/Systmm
Product-JES3 (5740-XYN) or topics common to both.
MVS/SYSTEM PRODUCT-JES2
MVS/SP-JES2 RELEASE 2 (5740-XYS)
MVS/System Product-JES2 Release 2 incorporates all of the functional
benefits of MVS/System Product-JES2 Release 1 and, in addition,
provides functional and device support enhancements to the MVS Base
Control Program and JES2. These enhancements offer an installation
opportunities to reduce the system virtual storage requirements of
major subsystem and system components, provide new facilities in the
areas of multi-system support and operations management, as well as
providing general functional and device support enhancements.
MVS/SYSTEM PRODUCT-JES2
MVS/SP-JES2 RELEASE 3 (5740-XYS)
MVS/System Product-JES2 (MVS/SP-JES2) Release 3 provides all of
the functions of MVS/System Product-JES2 Release 2 together with:
The ability to achieve new levels of capacity and responsiveness on
3033 Processors via performance improvements implemented in
conjunction with the 3033 Extension feature; support for the Extended
Addressing feature, permitting up to 32 megabytes of addressable
storage on 3033, 3081, 3083 and 3084 processors, thereby providing
potential for further capacity and responsiveness; significant improvements in System RAS; extensions to the reconfiguration and recovery
aspects of Global Resource Serialization; and the potential further
savings in the system virtual storage requirements. RMF support for
MVS/System Product-JES2 Release 3 is provided by an enhancement
for RMF Version 2 Release 4.
------- -- ---- -------_.- - --- ISG
------
PS S.46
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
MVS/SYSTEM PRODUCT-JES2
VERSION 1 RELEASES 3.2 and 3.3
5740-XYS
MVS/System Product-JES2 Release 3.2 provides support for the
MVS/Operator Communication Control Facility (MVS/OCCF). Release
3.3 provides ten new user exits, improvements to the usability and
operational characteristics of JES2 output processing, and a new
capability to dynamically add and delete spool data sets without warm
starts.
TREND ANALYSIS (CICS/OS/VS)
5740-XYT
Trend Analysis is a business graphics and data base system which
provides a computer-based linkage between an organization's
operating and planning information files and the data presentation
needs of decision makers. Trend Analysis integrates the color graphics
capabilities of the 3279 Color Display Station and the 3287 Color Printer
with the data management capabilities of IMS/VS-DB and the
mo~eling and. projection capabilities o~ PLAN.CODE, IBM's primary
business planning product. Trend AnalysIs functions are invoked from a
display station through easy-to-use menus which can be customized to
m~et s~ecial o~ganizational requirements. Reports can be displayed or
prrnted In a varrety of tabular data or graphic report formats.
COPICS ONLINE ROUTING
RELEASE 1, Modification Level 0
DOS/VSE (5746-XY1)
OS/VS (5740-XYX)
The COPICS Online Routing program products for DOS/VSE and
OS/VS, referred to as COPICS Online Routing in this document, are a
set of programs for creation, maintenance, and administration of
routings in an interactive system environment using the 3270 Information Display System. These products require either CICS/DOS/VS and
DL/I DOS/VS or CICS/OS/VS and IMS/VS, respectively. COPICS
~nline .Routing is primarily designed for the Manufacturing and Process
Industrres. It can be used both as an integrated building block of the
Communication-Oriented Production Information and Control System
(COPICS) as well as a stand-alone system in non-COPICS environments. COPICS Online Routing DOS/VSE is functionally an enhancement to, and a .replacement of, the current Online Routing program,
5746-XXP. It will also replace the COPICS Routing Data Control Field
Developed Program, Program Number 5798-CXE.
TELECOMMUNICATIONS CONTROL SYSTEM
ADVANCED COMMUNICATIONS FUNCTION
TCS-ACF (5740-XY3)
The Telecommunications Control System - Advanced Communications
F.unction provides enhanced installability and operability for users with
single-system ACF/TCAM or TCAM/NCP/VS-Direct networks or
systems utilizing the ACF /TCAM Multisystem Networking Facility.
These functional capabilities are available to the user through TCS-ACF
and a separately orderable TCS-ACF Networking feature.
RESOURCE MEASUREMENT FACILITY
RMF (5740-XY4)
Versi~n 2 of t~e Resource Measurement Facility is a significant
func!lonal extension of the s~stem measurement capability provided in
VerSion 1. RMF enables an Installation to measure selected areas of
system activity and obtain feedback that can be used to evaluate
system performance.
PROGRAMMED CRYPTOGRAPHIC FACILITY
5740-XY5
The Programmed Cryptographic Facility provides an installation with the
ability. to encipher and decipher ~ata, and create and manage the keys
as~oclated with the data encryption. It employs a software implementation of the Federal Hardware Data Encryption Standard (DES)
algorithm to encipher and decipher data using a 56-bit key. This facility
may be. used in conj,:,nc~ion with. the ACF/VTAM Encrypt/Decrypt
feature In a communications environment with the access method
servic~s RE~RO function of either Access Method Services Cryptographic Option or MVS/XA Data Facility Product, or with installation
encryption / decryption applications for data to be transmitted over
communications lines, or stored on some physical device.
New
CRYPTOGRAPHIC UNIT SUPPORT (5740-XY6)
The ~.ryptographic Unit S.up~ort prog~am pr~duct promotes security for
sensitive data In communication and file applrcations through the use of
~ryptography. It provides an interface to the 3848 Cryptographic Unit,
Includes a process to generate cryptographic keys and a facility to
manage those keys. The 3848 implements the Data Encryption
Standard (DES) as published in Federal Information Processing
Standard #46.
DATA BASE DESIGN AID (DBDA)
5740-XY8 (OS/VS)
5746-XXQ (DOS/VS)
The Data Base Design Aid is a collection of programs that assist the
data base designer by performing a major portion of the data base
logical design process. Data base requirements which have been
collected and recorded on DBDA Requirement Specification Forms are
used to produce a logical design of the data base by mapping the data
elements into segments and a hierarchical structure that shows the
minimum set of relationships required by an integrated data base (one
that services many application programs). The processing aids the data
base designer by identifying inconsistencies or omissions in the input
requirement, specifications, listing redundant data identified by the
designer and producing a series of diagnostic and design reports.
Using DBDA's suggested logical design to design a physical data base,
the data base designer can expect to save from poor initial designs.
DOS SORT/MERGE
5743-SM1
The DOS Sort/Merge provides a number of functional improvements
over the DOS Tape and Disk Sort/Merge 360N-SM-483, including
support of the 3330/3333 Disk Storage Facility and the 3400-series
Magnetic Tape Units. All the functions, facilities and options of the
Type I program 3§ON-SM-483 as well as the earlier program Tape and
Disk Sort/Merge (5736-SM1) are included.
SYSTEM/7 HOST MACRO ASSEMBLER (ASM/7)
OS-VS (5744-AB1) - DOS-VS (5747-AB1)
ASM/7 is a System/7 Language Translator that translates symbolic
instructions into machine-language instructions, assigns storage
locations, and performs auxiliary functions necessary to produce
executable machine-language programs.
ASM/7 is language
compatible with the stand-alone ASM/7. In addition, ASM/7:
Produces object modules suitable for input to the storage load
formatting utility or the Linkage Editor ... allows user macros ... provides
conditional assembly instructions .. , supports new instructions for
System /7 mdl E processor.
1410/7010 EMULATOR PROGRAM for the
S/370 MODELS 145,15511 and 158
Under OS/VS (5744-AG1)
The 1410/7010 Emulator Program executes as a problem program
under the
Operating
System
Virtual
Storage
using
the
1401/1440/1460, 1410/7010 Compatibility feature (#4458). The
combination of the program and the compatibility feature enables
programs written for the 1410 or 7010 Data Processing Systems to be
executed on the mdl 145. Most 1410/7010 programs require no
changes for execution under the emulator, although certain special and
custom features are not emulated.. Emulation is provided for
141 ~/701 0 systems with main storage sizes from 10,000 to 100,000
positions of core storage.
1401/1440/1460 EMULATOR PROGRAM
for the S/370 under OS/VS
5744-AH1
The 1401/1440/1460 Emulator program executes as a problem
program under the Operating System/VS using the IBM Compatibility
feature. (if¥57 or #4458). The combination of the program and the
compatlbllrty featu~e enables programs written for the 1401, 1440, or
1460 Data Processing Systems to be executed on the mdls 135, 145 or
158. Most 1401/1440/1460 programs require no changes for
e~ecution under the emulator, although certain special and custom
features are not emulated. Programs written for the 1401 mdl G are not
emulated. Emulation iSrprovided for 1401/1440/1460 systems with
main storage sizes from 2,000 to 16,000 positions of main storage.
--- - -----
PS S.47
Do not reproduce without written permission
---= =-=- :§~§: ISG
Aug 83
PRODUCT SUMMARY - SOFTWARE
3704/3705 SYSTEM SUPPORT PROGRAMS
for OS/VS and DOS/VS
3704/3705 System Support Programs for OS/VS and DOS/VS consist
of a Generation Procedure which allows generation o.f the N~~work
Control Program/Virtual Storage (NCP /VS), and Its Partitioned
Emulation Programming (PEP) Extension, the Emulation Program/
Virtual Storage (EP /VS), the Load Program, the Dump Program, and the
3704/3705 Assembler for use in conjunction with OS/VS and DOS/VS
systems.
DOS EMULATOR UNDER OS/VS
VERSION 3 (5744-AS1)
The DOS Emulator eases the transition for DOS (Releases 25, 26 27,
28, 29, 30, 31, 32 and 33) user migration to OS/VS and the
System/370 Models 135 (OS/VS1), 145, 155 II, or 158. The Emula~or
program integrates the facilities of the DOS system into the operating
environment of OS/VS. It receives DOS jobs as input and produces
output in the same format as found in DOS. Throug~p!-lt under
emulation is not determined as much by the emulator as It IS by the
DOS program being executed. Throughput of D~S. jobs. is affected by
the amount of interference from higher PriOrity Virtual or real
regions/address spaces, and the paging rate of the system.
PROGRAMMABLE STORE SYSTEM HOST SUPPORT
DOS (5747-016) - OS (5744-016)
3650 PSS and 3680 PSS Programming Support consists of SPPS II and
Host Support.
New
DISK OPERATING SYSTEM/VIRTUAL STORAGE
EXTENDED, RELEASE 3
TOGETHER WITH VSE/ADVANCED FUNCTIONS
5745-030
The Disk Operating System/Virtual Storage Extended (DOS/VSE),
5745-030, is a disk-resident system designed to provide operating
system capabilities together with VSE/ Advanced functions for the 4300
Processors in S/370 mode and ECPS:VSE mode and the 3031 Single
Processor in addition to any virtual storage S/370 processor from
370/115 through 370/158, and their attachable input/ output devices.
VSE requires the clock comparator and the CPU timer feature (standard
on all S /370 mdls except 135 and 145, and also standard on 4300
Processors).
INTERACTIVE PERSONNEL SYSTEM
RELEASE 1 Modification Level 2
CICS/DOS/VS (5746-AM1)
The Interactive Personnel System is designed to assist personnel
functions in performing their required tasks efficiently and competently.
Online-inquiry, online-update, as well as batch processing capabilities
are offered. The data organization methods of the Data Language/I
Disk Operating System/Virtual Storage (DL/I DOS/VS) are used for
data storage and retrieval. The online capability is made possible
through the use of the data communication facilities of the Customer
Information Control System/Virtual Storage (CICS/DOS/VS).
VSE/VSAM RELEASE 1
5746-AM2
The Disk Operating System/Virtual Storage (DOS/VS) is a diskresident system designed to provide operating sy~tem capabilities. for
any virtual storage S/370 Processor and attachable Input/output Units.
VSE/VSAM is an access method designed to operate with direct
access devices and to support both direct and sequential processing .by
means of either an index key (keyed accessing) or by means of relative
byte address (addressed accessing). (Relative byte. address refers to
the displacement of a stored record, or cO'"!trol Inte.rval! from the
beginning of the storage space allocated to the file to which It belongs.)
DISK OPERATING SYSTEM/
VIRTUAL STORAGE EXTENDED
DOS/VSE RELEASE 1 (5745-020)
VSE/VSAM RELEASE 2 with VSE/VSAM
SPACE MANAGEMENT for SAM FEATURE
5746-AM2
DISK OPERATING SYSTEM/VIRTUAL STORAGE
DOS/VS (5745-010)
The Disk Operating System/Virtual St?rage/Ext~nded (DOS/VSE) .i~ a
disk-resident system designed to prOVide operating system capabilities
for the 4300 Processors in S/370 mode and ECPS:VSE mode and the
3031 Single Processor in addition to any virtual storage S/370
Processor from 370/115 through 370/158, and their attachable
input/output devices. DOS/VSE requires the clock comparator and the
CPU timer (standard on all S/370 models except 135 and 145, and also
standard on 4300 Processors).
DISK OPERATING SYSTEM/VIRTUAL STORAGE
EXTENDED, RELEASE 2
TOGETHER with VSE/ADVANCED FUNCTIONS
DOS/VSE RELEASE 2 (5745-030)
The Disk Operating System/Virtual Storage Extende~. i~ a disk-resid~nt
system designed to provide operating system capabilities together With
VSE/ Advanced functions for the 4300 Processors in S/370 mode and
ECPS:VSE mode and the 3031 Single Processor in addition to any
virtual storage S/370 processor from 370/115 through 370/158, and
their attachable input/output devices. VSE requires the clock
comparator and the CPU timer feature (standard on all S/370 mdls
except 135 and 145, and also standard o~ 43~0 Processo~s).
DOS/VSE together with VSE/ Advanced functions IS an operating
system optimized to the function and performance need~d by the small
and intermediate users of 4300 Processors, the 3031 Single Processor
and the S/370. It gives the user the ability to multiprogram up to
twelve job streams concurrently which generally include ~he interactive
functions provided with VSE/ICCF, VSE/POWER spooling product, a
real time subsystem, such as CICS/VS, a TP access method such as
ACF/VTAM, one or two batch job streams, and an unscheduled work
partition for quick turn-around jc;>bs. Th~ op~rating system supports
most terminals and DASD deVices. ThiS gives the VSE user the
capability to start out on a small model of either S/370 or the 4300
Processors and grow his system and workload up through the S/370
and / or 4300 Processor line, as his DP business needs increase.
DOS/VSE is classified as System Control Programming (SCP) for
distribution, installation, and programming support purposes.
VSE/VSAM is an access method designed to operate with direct
access devices and to support both direct and sequential processing .by
means of either an index key (keyed accessing) or by means of relative
byte address (addressed accessing). (Relative byte. address refers to
the displacement of a stored record, or cO'"!trol Inte.rval! from the
beginning of the storage space allocated to the file to which It belongs.)
VSE/VSAM RELEASE 2 BACKUP/RESTORE FEATURE
5746-AM2
VSE/VSAM Backup/Restore Feature Release 2 offers enhancements
to the support provided in the initial release. Files and their related
catalog information, includ.i~g empty objects, .may be restored to .a
different device type. Additionally, the 3375 Direct Access Storage IS
supported for all operations.
VSE/VSAM RELEASE 3
5746-AM2
VSE/VSAM Release 3 provides significant enhancements designed to
improve catalog reliability and integrity while providing additional
serviceability and usability.
VSE/SYSTEM/3-3340 DATA IMPORT
RELEASE 1 (5746-AM3)
VSE/System/3 - 3340 Data Import to DOS/VSE is a utility program
that assists the user in converting System/3 3348 files into DOS/VSE
SAM or VSE/VSAM files. The VSE/System/3 - 3340 Data Import
Release 1 runs as a problem program under control of DOS/VSE with
VSE/ Advanced Functions and requires a minimum of 256K bytes of
storage in a virtual partition. This program requires the 3340/3344
Direct Attachment feature #7851 on a 4331 Processor. The
VSE/System/3 - 3340 Data Import Release 1 program executes on
any 4331 Processor supported by DOS/VSE with VSE/ Advanced
Functions.
- --------= ::-:. :§':f§: ISG
Do not reproduce without written permission
PS S.48
Aug 83
PRODUCT SUMMARY - SOFTWARE
VSE/FAST COpy DATA SET PROGRAM
RELEASE 1 (5746-AM4)
VSE/Fast Copy Data Set Program Release 1 is an enhanced version of
the Fast Copy Disk Utility contained in DOS lYSE providing additional
functions and improved performance. VSE/Fast Copy Data Set
Program Release 1 executes in tlw minimum virtual partition of
VSE/ Advanced Functions Release 2. The VSE/Fast Copy Data Set
Program Release 1 is designed to operate with VSE/ Advanced
Functions Release 2 and executes on any configuration supported by
this operating system.
VSE/FAST COpy DATA SET PROGRAM
RELEASE 2 Modification Level 0
5746-AM4
VSE/Fast Copy Version 1, Release 2, Modification Level 0 (V1.2.0) is an
enhanced version of the VSE/ Fast Copy Data Set Program Version 1.1
providing improved performance. The enhancement is a multibuffering concept developed in order to provide streaming for the 8809
Tape Unit in most instances where alternate blocks are assigned or
temporary read errors occur. VSE/Fast Copy V1.2.0 is designed to
operate with VSE/ Advanced Functions Version 1, Release 3, Modification Level 5, and VSE/SP Version 1, Release 1, Modification Level 0
and executes on any configuration which they support. VSE/Fast Copy
V1.2.0 requires a minimum virtual partition size of 148K bytes for FBA
disks. The minimum virtual partition size required for CKD devices
depends on the CKD device type.
VSE/3270 BISYNC PASS-THROUGH
5746-AM5
New
INTERACTIVE FINANCIAL SYSTEM 2 - DOS/VS
PROFIT & LOSS, BALANCE SHEET,
FINANCIAL STATUS REPORTS
IFS 2 RELEASE 2 (5746-F53)
The Interactive Financial System 2 is part of the Interactive Financial
System (IFS). The Interactive Financial System is a set of application
programs designed to perform accounting and related functions. The
set consists of the programs IFS 1, IFS 2, IFS 3 and IFS 4. IFS 1
Release 2 Modification Level 0 is a prerequisite to IFS 2. With IFS 2,
the user can define the profit and loss statement, balance sheet and
financial status report to his individual requirements.
INTERACTIVE FINANCIAL SYSTEM 3 - DOS/VS
OPEN ITEM ACCOUNTING
IFS 3 RELEASE 2 (5746-F54)
The Interactive Financial System 3 is part of the Interactive Financial
System (lFS), The Interactive Financial System is a set of application
programs designed to perform accounting and related functions. The
set consists of the programs IFS 1, IFS 2, IFS 3 and IFS 4. IFS 1
Release 2 Modification Level 0 is a prerequisite to IFS 3. IFS 3 extends
the account management functions provided by IFS 1 by the open item
accounting procedure for debtor, creditor and impersonal accounts.
INTERACTIVE FINANCIAL SYSTEM 4 - DOS/VS
PAYMENT PROCESSING
IFS 4 RELEASE 2 (5746-F55)
VSE/3270 Bisync Pass-Through allows a 4300, S/370 or 3031
Processor running under DOS/VSE to appear as a remotely attached
BSC 3271 control unit to an S/370, a 303X Processor or another 4300
Processor. 3270-type displays attached to the remote processor may
alternately access local CICS/VS applications within it or new or
currently existing applications on the remote host processor over a
binary synchronous communications link.
The Interactive Financial System 4 is part of the Interactive Financial
System (lFS). The Interactive Financial System is a set of application
programs designed to perform accounting and related functions. The
set consists of the programs I FS 1, I FS 2, I FS 3 and I FS 4. I FS 1
Release 2 Modification Level 0 and I FS 3 Release 2 Modification Level 0
are prerequisites to IFS 4. IFS 4 is designed to determine the maturity
of open items by user-specified criteria, such as settiement periods and
payment strategy, and to prepare and print a payment proposal list of
the selected items.
DOS/VS COBOL COMPILER AND LIBRARY (5746-CB1)
DOS/VS COBOL OBJECT LIBRARY (5746-LM4)
COST ACCOUNTING SYSTEM DOS/VSE
RELEASE 1 (5746-F58)
The DOS/VS COBOL Compiler and Library provide a number of
improvements in function and performance over previous DOS IBM Full
American National Standard COBOL Compilers. The Library is required
for execution of compiled programs. The compiler and library operate
under control of DOS/VSE, and support American National Standard
COBOL, X3.23-1968. Release 3 supports American National Standard
COBOL, X3.23-1974. These program products are designed for use in
a virtual storage environment under the DOS/VSE Operating System.
VSE/3890 DOCUMENT PROCESSOR SUPPORT
5746-DC1
The 3890 VSE Support (5746-DC1) is used to read and stacker-select
banking documents using the 3890 Document Processor. This support
operates under VSE/ Advanced Functions Release 2, SSX/VSE Release
3 and later releases. Device-dependent macros called stacker control
instructions (SCls) are provided with the support. These instructions
are used to code an SCI program that controls stacker selection when
loaded into the 3890.
.
ELECTRONIC PAYMENT SYSTEMS SUPPORT/
CHECK PROCESSING DOS/VS(DOSCHECK)
(5746-F12)
Electronic Payment Systems Support/Check Processing DOS/VS
(DOSCHECK) provides the DOS/VS user with a comprehensive
check-processing system designed to exploit the advanced functional
capabilities of the 3890 Document Processor.
INTERACTIVE FINANCIAL SYSTEM 1 - DOS/VS
POSTINGS AND GENERAL LEDGER
IFS 1 RELEASE 2 (5746-F52)
The Interactive Financial System 1 is part of the Interactive Financial
System (IFS). The Interactive Financial System is a set of application
program products designed to perform accounting and related
functions. The set consists of the programs IFS 1, IFS 2, IFS 3 and IFS
4. IFS 1 allows posting either in interactive mode using 3277, 3278 or
3279 Display Stations or in batch mode. Any account and any voucher
can be displayed and, if necessary, processed randomly at the terminal.
Accounts can be processed in a foreign currency. IFS 1 (DOS/VS)
Release 2.0 is functionally compatible with IFS 1 (OS/VS) Release 2.0.
The Cost Accounting System DOS/VSE is designed to meet cost
accounting requirements in most companies.
COMMERCIAL BANK APPLICATION SYSTEM (CBAS)
CBAS BASE PRODUCT ... 5746-F60
DEMAND DEPOSIT ACCOUNTING ... 5746-F61
SAVINGS ACCOUNTING ... 5746-F62
TIME CERTIFICATES of DEPOSIT ACCOUNTING ...
5746-F63
GENERAL LEDGER ACCOUNTING ... 5746-F64
REVOLVING CREDIT ACCOUNTING ... 5746-F65
Commercial Bank Application System, a set of applications software for
commercial banks, complements Customer Information Facility /VS and
uses the DOS/VSE environment to provide financial account processing. CBAS consists of the following program products: Commercial
Bank Application System Base Product Support (CBAS Base) (The base
programs provide common support for anyone or more of the five
application products in CBAS, Program Number 5746-F60. ...
Commercial Bank Application System Demand Deposit Accounting
(CBAS DDA), 5746-F61 ... Commercial Bank Application System
Savings Accounting (CBAS SAY), 5746-F62 ... Commercial Bank
Application System Time Certificates of Deposit (CBAS TCD),
5746-F63 ... Commercial Bank Application System General Ledger
Accounting (CBAS GNL), 5746-F64 Commercial Bank Application
System Revolving Credit Accounting (CBAS RVCi, 5746-F65. The
Commercial Bank Application System provides a commercial bank with
batch application software to support key application areas. Using
IBM's Data System products, CICS/DOS/VS, DL/I DOS/VS and
CIF/VS, the product will support Demand Deposit Accounting, Savings
Accounting, Time Certificates of Deposit Accounting, Revolving Credit
Accounting and General Ledger Accounting.
----- ---
PS S.49
Do not reproduce without written permission
= - - :E'f~ ISG
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
COMMERCIAL BANK APPLICATION SYSTEM (CBAS)
CLUB ACCOUNTING '" 5746-F66
INSTALLMENT LOAN ACCOUNTING ... 5746-F67
COMMERCIAL LOAN ACCOUNTING ... 5746-F68
The Commercial Bank Application System is a set of interrelated
It complements Customer
applications for commercial banks.
Information Facility/Virtual Storage (CIF /VS) and uses a DOS/VSE
environment to provide financial account processing for the following
new CBAS programs: Commercial Bank Application System Club
Accounting (CBAS CLB) (5746-F66) ... Commercial Bank Application
System Installment Loan Accounting (CBAS ILN) (5746-F67) ...
Commercial Bank Application System Commercial Loan Accounting
(CBAS CML) (5746-F58). The Commercial Bank Application System
provides a commercial bank with batch application software to support
key application areas. Using IBM's data systems and data communications products (CICS/ DOS/VS, DL/I DOS/VS and CIF/VSl, CBAS
now supports club accounting, installment loan accounting and
commercial loan accounting.
HEALTH CARE SUPPORT ACCOUNTING SYSTEM
5746-H14
The Health Care Support/Accounting System consists of the Health
Care Support/Accounting Base Program and the Health Care
Support/ Accounting Application Program. The Accounting System
provides hospital accounting for the single or multiple hospital
environment. The Accounting Application Program includes patient
billing, accounts receivable, general ledger and inquiry.
VSE INTERACTIVE PROBLEM CONTROL SYSTEM
VSE/IPCS RELEASE 3 (5746-SA1)
VSE/IPCS assists in problem determination by providing a uniform
mechanism for reporting and diagnosing software faiiures.
DOS/VS SORT/MERGE
5746-SM1
The DOS/VS Sort/Merge provides additional features and improved
performance in virtual mode over the DOS Sort/Merge (5743-SM1).
All sort and merge applications that run on 5743-SM1 will run on the
DOS/VS Sort/Merge without changes to the control statements or to
the interface with user programs with the following exceptions: 2311
workfiles are not supported ... The design point is 16K virtual storage
(10K for 5743-SM1). DOS/VS Sort/Merge operates only in a S/370
virtual systems environment on DOS/VS Release 29 and subsequent
releases.
DOS/VS-VM/SP SORT/MERGE
VERSION 2 RELEASE 5 (5746-SM2)
DOS/VS-VM/SP Sort/Merge Version 2 Release 5 provides additional
functions that improve the productivity of DOS/VS-VM /SP
Sort/Merge Version 2 users running under the control of DOS/VS
Releases 33 and 34, DOS/VSE with VSE/ Advanced Functions, and
CMS with VM/SP.
DOS FORTRAN IV LIBRARY OPTION 1 (5746-LM3)
SYSTEMS 1401/1440/1460
EMULATOR PROGRAM RELEASE 1
5746-SU1
The DOS FORTRAN IV Library Option 1 is an optional feature of the
DOS FORTRAN IV Library that provides the ability to use S/370 I/O
devices with larger block sizes and to create and process magnetic tape
files that conform to the American National Standard Code for
Information Interchange. Library Option 1 is required for 3330, 3340,
3330 mdl 11, 3350, fixed block devices, 2560 and 5425 object time
support. Library Option 1 is required for FORTRAN support of
DOS/VSE with VSE Advanced Functions Release 2. Support of other
card readers, card punches and printers is commensurate with current
DOS FORTRAN support for these device classes. Support of fixed
block devices does not include object time support of direct access
files.
The Systems 1401 /1440/1460 Emulator Program - - hereafter referred
to as the 1400 Emulator - - allows the execution of 1400 programs on
4331 Processors equipped with the 1400 Compatibility feature and on
4341 Processors with the 1400 Simulator generated as part of the 1400
Emulator. The simulation of disk I/O on fixed block mode devices is
provided. The 1400 Emulator runs as a problem program under control
of DOS Release 26, DOS/VS Release 34 and DOS/VSE with
VSE/ Advanced Functions. As a problem program it is possible to
integrate the 1400 Emulator into a DOS, DOS/VS or DOS/VSE system
and to take advantage of the capabilities of such a system. Several
1400 Emulators, up to the number of partitions available, can run
concurrently.
LIFE INQUIRY/DATA ENTRY
5746-N11
VSE/INTERACTIVE COMPUTING AND
CONTROL FACILITY - RELEASE 1
VSE/ICCF (5746-TS1)
Life Inquiry/Data Entry provides online terminal capability for inquiry
into Consolidated Functions Ordinary (CFO) policy master records,
policy value quotations, and direct entry of the file maintenance,
accounting, and status transactions. Normally these transactions are
input to the batch daily cycle programs, CFO \I (5736-N13) and '62
CFO (Type II program 1401-IL-02X). Life Inquiry/Data Entry utilizes
the 3270 Information Display System and operates under control of
CICS/DOS/VS, CICS/OS/VS or IMS/VS.
BASIC TELECOMMUNICATIONS ACCESS METHOD
EXTENDED SUPPORT (BTAM-ES)
5746-RC5
The Basic Telecommunications Access Method Extended Support
provides basic support for data communications on DOS lYSE systems.
ADVANCED COMMUNICATIONS FUNCTION for
VTAM ENTRY
ACF/VTAME (5746-RC7)
Advanced Communications Function for VTAME Entry is a program for
users of the Disk Operating System /Virtual Storage Extended
(DOS/VSE). ACF /VTAME provides support for the Communications
Adapter (CA) of the 4331 Processor and also provides support for
various channel attached devices. Key ACF/VTAM and ACF/NCP/VS
functions are supported in ACF/VTAME including support for
multisystem networking. The functions provided by ACF/VTAME are
compatible with the analogous functions provided by ACF/VTAM
Version 1 Release 2.
DOS/VSE REMOTE JOB ENTRY
WORKSTATION PROGRAM
5746-RC9
The DOS lYSE Remote Job Entry Workstation Program enables a
S/370, 3031 Processor Complex or the 4300 Processor to function
simultaneously as: A Multi-leaving Remote Job Entry Workstation for
submitting jobs to a central system for execution under OS /VS ... a
local processor for execution of DOS/VSE batch jobs in other
DOS/VSE partitions.
VSE/lnteractive Computing and Control Facility is an interactive system
designed to run on DOS/VSE with VSE/ Advanced Functions. It is an
extension of the ETSS FOPs (ETSS I, ETSS \I and TCS/VS). The
VSE/lnteractive Computing and Control Facility extends the benefits of
interactive computing to the DOS lYSE users of the 4300 Processors
and S/370 across all industries. The VSE/lnteractive Computing and
Control Facility is a tool for productivity increase, ease-of-use
improvements and data security assistance (access control). The
VSE/ICCF changes DOS/VSE from a batch to an intera9tive operating
system, by adding interactive capabilities to the DOS/VSE batch
operating system.
VSE/DATA INTERFILE TRANSFER, TESTING
AND OPERATIONS UTILITY, RELEASE 3
VSE/DITTO (5746-UT3)
VSE/Data Interfile Transfer, Testing and Operations Utility is a
general- purpose utility program for card, magnetic tape and disk
input/ output devices. It provides the facility to list, copy, alter and
create files or portions of files. The wide range of user-oriented
functions is intended to aid programmer testing, reduce the need for
separate specialized utility programs and provide greater operational
productivity. VSE/DITTO offers the user an efficient and easy-to-use
tool for testing and file-handling in both a batch and interactive
environment.
--- --------
.:...::..:=~= ISG
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
VSE/OPERATOR COMMUNICATIONS CONTROL
FACILITY RELEASE 1
VSE/OCCF (5746-XC5)
PS S.50
Aug 83
New
VSE ADVANCED FUNCTIONS RELEASE 2
5746-XES
The VSE/Operator Communication Control Facility (VSE/OCCF) is
designed to reduce operator interaction for the operation of a
DOS/VSE-controlled computing system and to allow operation of the
system from a remote console. The program provides functions and
services that allow the user to reduce the activities normally executed
by an operator at the system console by predefined certain activities.
The functions and services of VSE/OCCF are of particular interest in a
distributed data processing (DDP) environment where a network
operator controls one or more DOS/VSE satellite systems. In this
environment, operator attendance and DP skill at the satellite systems
can be reduced to a minimum. VSE/OCCF is also applicable in
environments with several single systems. For example, a number of
single systems can be controlled via terminals that are centralized at
one location remote from the systems.
VSE/ Advanced Functions Release 2 provides all functions of
VSE/ Advanced Functions Release 1 and significant new facilities: ...
3262 Line Printer support .. , Listlog utility ... additional DLBL information '" SYSLNK in VSAM managed space ... extended VOLUME
command ... support of VOLUME mount requests ... DASD hharing
across processors ... library sharing across processors ... assembler
language macros to use DASD sharing services ... 208 tasks/12
partitions ... extended label area support ... system tailoring at IPL ...
library sharing across partitions ... library concatenation ... online system
generation ... DASD device independence for SAM/DAM files ...
B-Transient area contention removal... VSE-VM/370 linkage
enhancements in an ECPS:VSE mode supervisor ... List VTOC
Improvements ... Removal of Certain Hardwaits ... Extended Problem
Determination Functions ... MSHP Support of Local APAR Fixes ...
Reduced SYSGEN Options.
ADVANCED FUNCTIONS - DOS/VS
5746-XE2
VSE/ADVANCED FUNCTIONS RELEASE 3
5746-XES
Advanced Functions - DOS/VS provides additional facilities and
improved performance over DOS/VS.
VSE/ Advanced Functions Release 3 provides all functions
VSE/ Advanced Functions Release 2 and significant new facilities.
of
VSE/POWER RELEASE 1 with
VSE/POWER REMOTE JOB ENTRY FEATURE
5746-XE3
VSE/ ADVANCED FUNCTIONS
VERSION 1 RELEASE 3 Modification Level 5
5746-XES
VSE/POWER Release 1 is a program developed on the POWER/VS
component of DOS/VS Release 34. It is a spooling system that
provides the user with automatic staging of unit-record input and
output and priority scheduling for all programs executed under its
control. VSE/POWER resides in one partition and is able to control all
remaining partitions of the DOS/VSE environment placed under its
control, provided these have a lower system dispatching priority than
that of the VSE/POWER partition.
VSE/ Advanced Functions ·1.3.5 (VSE/ AF 1.3.5) provides support for
the 3430 Tape Unit, the 3262-5, and 4245 Line Printers and incorporates functional enhancements (hardware support) previously announced and shipped as Small Programming Enhancements (SPEs)
after VSE/ AF 1.3.0 availability. Ease-of-use, availability and reliability
of VSE/ Advanced Functions are improved.
VSE/POWER RELEASE 2 WITH
VSE/POWER SHARED SPOOLING FEATURE
5746-XE3
VSE/POWER Release 2 is an enhancement of VSE/POWER Release 1.
It i.s a spooli~g system that provides the user with automatic staging of
unit-record JnP~t and output and priority scheduling for all programs
executed under Its control. VSE/POWER resides in one partition and is
able to control all remaining partitions of the DOS/VSE environment
placed under its control, provided these have a lower system dispatching priority than that of the VSE/POWER partition.
JOB ENTRY PROGRAM (JEP) (5746-XE6)
FILE TRANSFER PROGRAM (574S-XE6)
The Job Entry Program provides the basic interconnection mechanism
between a DOS/VSE subhost, either a S/370, a 3031 Processor or
4300 Processors, to a job entry subsystem host, either under OS/VS or
DOS/VSE, using ACF/VTAM Version 1 with the Multisystem
Networking Facility (MSNF) feature or ACF/VTAM Version 2 or
ACF /VTAME. It offers job submission from a subhost to a job entry
subsystem at the host and routing of job output back to the originating
subhost or to an alternate destination.
VSE/ACCESS CONTROL - LOGGING and REPORTING
RELEASE 1 (5746-XE7)
The VS~/ Access Control - Log~ing a':1d Reporting Release 1 program
product IS part of the data security assist functions offered for all users
of DOS/VSE and designed to assist in auditing a DOS/VSE data
processing installation.
VSE/ADVANCED FUNCTIONS RELEASE 1
5746-XES
VSE/ Advanced Functions provides all functions of Advanced Functions
DOS/VS and significant new facilities: 7 Partitions for all SYSRES
DASD types ... support of 3310 and 3370 in S/370 compatibility mode
under VMLE ... impliCit Link ... area for job-to-job communication ...
multiple label areas on SYSRES ... retain message with outstanding
reply... elimination of LBLTYP statement ... automated system
initialization ... dump improvements ... fast B- and C-transient fetch ...
fast OPEN of hard-copy file ... high-level SDL search ... multiple extent
page data set ... JCL option for fast CCW translate ... VMLE enhancements.
STORAGE and INFORMATION RETRIEVAL SYSTEM/
DISK OPERATING SYSTEM with VIRTUAL STORAGE
STAIRS/DOS/VS (5746-XR4)
The conventional method used for indexing documents in a specialized
information system or library is tiring and cumbersome work for
specialists. Now, documents, articles from periodicals and magazines,
patent texts, as well as their abstracts, can be converted into machinereadable form for entry into a computer system. Once entered, the
material can be used during subsequent searches, using the language of
the technical area involved, to retrieve the desired information. The full
texts, or associated bibliographic identifiers (such as title, author,
publisher and source), make up a dynamically growing file of data which
can be searched by specialists in law, engineering, medicine, sales,
marketing, management and others seeking material of interest
pertaining to their own spheres.
CICS/DOS/VS EXTM (5746-XXB)
The basic function of the Extended Telecommunications Modules
(EXTM) feature of CICS/DOS/VS is to establish and support data flow
between a CICS/DOS/VS application and a corresponding user
application for IBM advanced communication subsystems and pre-SNA
terminals.· Services required to support the necessary data flow
(System Services Control Point Session Control, etc.) are an integral
part of EXTM. EXTM uses the functional capability of the 3704/3705
Network Control Program/VS (NCP /VS) for controlling terminal
operations. Support utilities for the IBM advanced communication
subsystems and utility services such as load and dump for 3704/3705
are included. A preprocessor is provided to aid the user during system
generation. Normal CICS/DOS/VS functions are supported when
using this program. EXTM has been designed to share and take
advantage of the functions of CICS/DOS/VS in order to optimize
attachment of SNA terminals to a CICS/DOS/VS system and can
co-exist in the same partition with BTAM.
COMMUNICATION-ORIENTED MESSAGE SYSTEM
CORMES RELEASE 1 Modification Level 0
5746-XXM
The Communication-Oriented Message System is designed to build the
central 'paperless' message exchange system in an organization
connecting terminal users and application programs of different
functions.
------- ----:: - - :§'fE: ISG
Do not reproduce without written permission
PS S.51
Aug 83
New
PRODUCT SUMMARY - SOFTWARE
ENTRY LEVEL INTERACTIVE APPLICATION SYSTEM-ONE
VERSION 1 RELEASE 1 (ELIAS-I)
5746-XXV
ELIAS-I is an interactive program which uses the facilities of the
Interactive Productivity Facility (5748-MS1). When correctly installed in
its Specified Operating Environment (SOE). ELIAS-I is designed to
provide a system which will facilitate the design, development and
implementation of D8 and or DB/DC programs with CICS/DOS/VS
and/or DL/I DOS/VS using COBOL or PL/I and, optionally,
DMS/CICS/VS-DOS.
ENTRY LEVEL INTERACTIVE APPLICATION SYSTEM-ONE
RELEASE 2
ELIAS-I (5746-XXV)
ELIAS-I is an interactive program which runs under the control of the
Interactive Productivity Facility, 5748-MS1. When correctly installed in
its Specified Operating Environment (SOE), ELIAS-I is designed to
provide a system which will facilitate the design, development and
implementation of VSAM, DB, DC and/or DB/DC programs with
CICS/DOS/VS, DL/I DOS/VS, and/or VSE/VSAM using COBOL or
PL/I and, optionally, DMS/CICS/VS DOS. ELIAS-I presents, via its
optional documentation and with supporting education, a design
methodology, especially oriented towards DB/DC applications, tailored
to the user who is not experienced in DB/DC implementation and who
has limited in-house skill. Hints and tips are provided to help facilitate
the use of improved programming techniques in the smaller system
environment. ELIAS-I interactive procedures are designed to provide
assistance with VSAM, DB, DC, and/or DB/DC program implementation by providing a dialog capability for the programmer. ELIAS-I bricks
are also included in the product. These bricks are designed to be
included in VSAM, DB, DC, and/or DB/DC application programs and to
provide assistance in utilizing standard CICS/DOS/VS, DL/I DOS/VS
and VSE/VSAM facilities.
DATA LANGUAGE/I-ENTRY DOS/VS
DL/I-Entry DOS/VS (5746-XX7)
DL/I-Entry DOS/VS is a data base management system developed to
improve the user's ability to implement data base processing applications. It provides data organization methods conducive to the creation,
interrelation and support of large common data bases. DL/I-Entry
DOS /VS executes as an application program in a virtual storage
environment under DOS/VS.
DOS/VSE 3800 PRINTING SUBSYSTEM
INDEPENDENT RELEASE
5747-CC1
Support for the 3800 Printing Subsystem consists of Support Code
within DOS/VSE and this Independent Release (lR). Together they
provide the DOS/VSE user with the same 3800 Printing Subsystem
support as previously announced for DOS /VS Release 34
DEVICE SUPPORT FACILITIES - STAND-ALONE
5747-DS1
Initializes count-key-data (CKD) or fixed block architecture (FBA) direct
access storage device (DASD) volumes fo operating system use,
inspects DASD volumes for defective tracks or blocks, conditionally
reclaims tracks or blocks previously flagged as defective, and analyzes
the operational status of supported FBA and CKD DASD and their data
and control paths. These functions aid the user in determining whether
an error situation is drive or media related so that the appropriate
recovery actions can be initiated. For the IBM 3340, 3344, 3350, 3375
and 3380, Device Support Facilities utilizes the skip displacement bytes
in an attempt to recover a defective track before assigning an alternate.
VSAPL
RELEASE 4.0 (5748-AP1)
VS APL interprets statements written in APL. The APL language has a
simple and uniform notation, tailored to interactive use at a terminal.
The language was originated to define programs concisely using
well-known symbols.
3650 PROGRAMMABLE STORE SYSTEM
POS APPLICATION/RETAIL ENVIRONMENT PROGRAM
VERSION 1 RELEASE 2.1
5748-014
3650 Programmable Store System POS Application / Retail Environment
provides basic controller and POS terminal application programs
necessary to perform sales and nonsales functions for the retail
environment.
3650 PROGRAMMABLE STORE SYSTEM POINT of SALE
APPLICATION/REPORT CUSTOMIZER PROGRAM
VERSION 1 RELEASE 2
5748-015
3650 Programmable Store System POS Application/Report Customizer
provides the user with the capability to prepare customized reports from
data accumulated at the Store Controller.
3650 PROGRAMMABLE STORE SYSTEM
POINT of SALE APPLICATION/
SUPERMARKET ENVIRONMENT PROGRAM
VERSION 1 RELEASE 2
5748-021
3650 Programmable Store System POS Application/Supermarket
Environment provides the basic controller and supermarket terminal
application programs necessary to perform the checkout and accounting functions for the supermarket store environment similar to those
provided in the 3660 Supermarket Scanning and Key Entry Systems.
3650 PROGRAMMABLE STORE SYSTEM
POINT of SALE APPLICATION/
STORE DATA MANAGEMENT
VERSION 1 RELEASE 3
5748-022
3650 Programmable Store System Point of Sale Appiication/Store D&ta
Management is a store controller program which aids in the building
and maintenance of user files in the store controllers.
VSPC FORTRAN
5748-F02
The VSPC FORTRAN processor is a one-pass, reenterable compiler
that includes its own library of mathematical, input/output, and service
routines. It runs under VSPC (Virtual Storage Personal Computing)
under OS/VS1, OS/VS2 (MVS) and DOS/VS. VSPC FORTRAN is a
terminal-oriented compiler, with performance and ease-of-use as
important considerations.
VS FORTRAN RELEASE 3.0
COMPILER and LIBRARY (5748-F03)
LIBRARY ONLY (5748-LM3)
VS FORTRAN includes and extends most of the features of the current
OS/DOS FORTRAN products (i.e., H Extended, Gl, F and their
Libraries), it supports the new Standards language for FORTRAN (ANSI
X3.9-1978 and ISO 1539-1980) and it provides IBM enhancements
designed to improve the usability of this new FORTRAN offering. It is a
single product usable in mUltiple operating systems. It compiles on and
its object code runs on the then current release of each supported
operating system at the time of availability of VS FORTRAN. Ease of
migration is provided by source and object level compatibility with
current IBM OS/DOS FORTRAN compilers (i.e., OS FORTRAN Gl, OS
FORTRAN H Extended and DOS FORTRAN F).
ELECTRONIC PAYMENT SYSTEMS SUPPORT/
CHECK REPORTS
5748-F13
Check Reports Release 1 is a new tool for timely management decision
making in a bank's check processing operation. The program generates
a wide range of statistics, and computes a number of ratios, at a
user-controlled frequency.
CHECK PROCESSING EXECUTIVE/3694
CHX/3694 (5748-F53)
Check Processing Executive/3694 (CHX/3694) provides the application
and device control functions for the 3694 Document Processor
transport and operator interfaces.
CHECK PROCESSING EXECUTIVE/VIRTUAL STORAGE
CHX/VS RELEASE 1 (5748-F54)
Check Processing Executive/Virtual Storage (CHX/VS) provides host
support for transmission of document data captured at a 3694
Document Processor.
Additionally, CHX/VS provides a Cycle
Sort/Statement Preparation Fine Sort interface to support the related
application facilities of Check Processing Executive/3694 (CHX/3694).
CHX/VS may be used to communicate with CHX/3694 (5748-F53)
operating in either individual 3694s or in a 3694 or 3602 operating as a
cluster coordinator.
-------
----
.:. =::: :5~§: ISG
Do not reproduce without written permission
PS S.52
PRODUCT SUMMARY - SOFTWARE
Aug 83
New
3600 ADMINISTRATIVE APPLICATION SUPPORT
5748-F55
VM PASS-THROUGH FACILITY
5748-RC1
The 3600 Administrative Application Support program product is a
Finance Communication System (FCS) application program which
executes in a 3601 or 3602 and provides field-oriented operation on the
3604-7 or the 3278-2 attached via the Device Cluster Adapter (DCA
3278). The program supports SLU type 2 communication protocol
(SNA 3270) and 3270 formatted datastreams to/from the user host
application programs. Local print support is provided to allow printing
the display image on a 3615 Administrative Printer. Use of the 3600
Administrative Application Support program allows existing user
applications written for the 3270 keyboard display under CICS,VS or
IMS/VS to be implemented on a 3600 FCS without modification to
host programs.
The VM Pass-Through Facility provides the VM/370 user with
interactive remote access to host facilities that support the 3271 and
3274 Control Units over BSC multi-point lines. This product supports
connection to host systems such as OS/VS2, OS/VS1, DOS/VS, VSE
and other VM/370 systems. Host applications supporting 3270 BSC
remote displays such as TSO, CICS and CMS, may be accessed via the
VM Pass-Through Facility. A user connected through the VM
Pass-Through Facility interfaces with the host application, and the
user's screen duplicates exactly what the host displays as though the
3270 were attached directly to the host system. When connected to a
SNA host the VM Pass-Through user will have full 3270 BSC access_to
the SNA network. In this environment, VM Pass-Through can be used
as the first step towards full participation in a SNA network.
IBM 3694 APPLICATION MACRO EXPANSIONS
VERSION 1 Modification Level 1
5748-F56
This licensed program contains the 3694 Application Macro Expansions.
These macro definitions can be utilized, in conjunction with the 3600
Finance Communications Assembler language (through host processor
assembly), in a user-supplied application program to generate
instructions which, when executed in the 3694 Document Processor
mdl1 or 2, perform the following document processing functions: 3694
initialization ... operational control ... 3694 document control section.
INTERACTIVE PRODUCTIVITY FACILITY
VM ENVIRONMENT
RELEASE 3 Modification Level 0
5748-MS1
The Interactive Productivity Facility is designed to simplify the tasks and
increase the productivity of those who use and manage IBM computer
resources. Release 3.0 of Interactive Productivity Facility is specifically
designed to assist users of the VM/SP System Installation Productivity
Option/Extended (VM/SP System IPO/E) by providing the user a
simplified and productive interface to VM/370 systems.
INTERACTIVE PRODUCTIVITY FACILITY
VSE ENVIRONMENT RELEASE 4.0
VM/VSE ENVIRONMENT RELEASE 4.0
5748-MS1
The Interactive Productivity Facility Release 4.0 (VSE, VM /VSE
Environments) is designed to simplify the tasks and increase the
productivity of those who use and manage IBM computer res9urces.
Release 4.0 of the Interactive Productivity Facility is specifically
designed to assist users of Release 3.0 of System Installation
Productivity Option/Extended (VSE System IPO/E) by providing the
user a simplified and productive interface to VSE systems.
INTERACTIVE PRODUCTIVITY FACILITY
VM ENVIRONMENT RELEASE 4.0
5748-MS1
The Interactive Productivity Facility is designed to simplify the tasks and
increase the productivity of those who manage, service and use VM/SP
systems. Release 4.0 of Interactive -Productivity Facility is specifically
designed to assist users of the VM/SP System Installation Productivity
Option/Extended (VM/SP System IPO/E) by providing the user a
simplified and productive interface to VM/SP systems.
INTERACTIVE PRODUCTIVITY FACILITY
VSE ENVIRONMENT RELEASE 4.1
VM/VSE ENVIRONMENT RELEASE 4.1
5748-MS1
Release 4.1 of the Interactive Productivity Facility enhances the VSE
System IPO/E Release 3.1. The Interactive Productivity Facility
provides the intermediate system user with a simplified and productive
interface to VSE systems.
INTERACTIVE PRODUCTIVITY FACILITY
VM ENVIRONMENT RELEASE 5.0
5748-MS1
The VM/lnteractive Productivity Facility Release 5.0 is designed to
simplify the user interface to the VM/SP System. VM/IPF communicates with the user through dialogs (panels) that support Administrative,
Operations and General User functions, and thus can reduce the skill
level required to use the system while improving user productivity. This
offering enhances the user's capabilities in the Application Development, Information Center, and Engineering/Scientific environments in
both autonomous departments and large establishments with distributed processing.
VM/INTERACTIVE PROBLEM CONTROL SYSTEM
EXTENSION (lPCS)
5748-SA1
IPCS is a software problem handling facility intended for use by
customer personnel and, where appropriate, IBM Program Support
Representatives (PSRs). IPCS will reduce the time, effort and expense
required to resolve software problems by providing facilities for
Problem Reporting, Problem Management and Problem Diagnosis.
AIRLINE CONTROL PROGRAM/
TRANSACTION PROCESSING FACILITY
ACP /TPF (5748-T11 )
ACP is a reliable, highly responsive, performance-oriented operating
system for realtime transaction-driven applications. The ACP System
provides the Multisystem Networking Facility within the framework of
the Advanced Communications Functions (ACF) of SNA. The
Multisystem Networking Facility is offered as a feature in a separatelyorderable component called ACP / ACF. The ACP /TPF is a prerequisite
to the ACP / ACF feature.
AIRLINE CONTROL PROGRAM/
TRANSACTION PROCESSING FACILITY (TPF)
VERSION 2 (TPF2)
TPF2/ACF FEATURE - TPF2/HPO FEATURE
5748-T12
TPF2 is a high-performance, high-ayailability system for realtime
applications. TPF2 systems are characterized by thousands of terminals
dispersed over a large geographical area where each location may have
from one to several hundred terminals. TPF2 provides realtime inquiry
and update to a large centralized data base. Key attributes of TPF2 are
its reliability and availability. This results from a well managed
operation and the use of support tools provided with the TPF2 system:
24-hour operation .. , Multi-application support and portability ... Over
300 operator commands ... Online debugging aids and offline test tools
... CPU, line and I/O error recovery and recording. TPF2 is a system
control program which has been designed for high performance and
high availability as a transaction processor. The TPF2/ ACF2 feature
provides the facility for multi-system networking and distributed
processing facilities at SNA3 levels. ACF2 is a prerequisite of the
High-Performance Option. The TPF2 HPO feature provides the ability
to share a data base in a loosely coupled multi-processor environment.
OFFLINE 3800 UTILITY PROGRAM PRODUCT
5748-UT2
The Offline 3800 Utility provides the offline 3800 user with the same
functional capability as is available to the online 3800 user. The utility,
which is executed in an online S/360 or 370 environment, can be used
to create control information and place it on magnetic tape which can
be used to set up the 3800 for the printing of user data.
DISPLAY MANAGEMENT SYSTEM/3790
5748-XC2
This program is a productivity aid for users of the 3790 Communication
System that eases the design, coding, testing and support of the 3790
application programs. The DMS/3790 program product consists of a
forms-oriented program generator for modules interfacing with the
operator terminals, a teleprocessing interface program, and a set of
macros to invoke functions, retrieve data, and manage the program's
working storage.
------
--- ----
Do not reproduce without written permission
==:: :S~E: ISG
PRODUCT SUMMARY - SOFTWARE
DISPLAY MANAGEMENT SYSTEM/3770
(DMS/3770), RELEASE 1
5748-XC3
This program is a productivity aid for users of the 3770 Communication
System that simplifies the design, coding, testing and maintenance of
the 3770 application programs. The DMS/3770 program product
consists of an interactive or forms driven panel definition program, a
screen handler program generator, a local data set access manager, a
host communication access manager and an application function
manager.
DEVELOPMENT MANAGEMENT SYSTEM/
DISTRIBUTED PROCESSING CONTROL EXECUTIVE
DMS/DPCX (5748-XC4)
Development Management System / Distributed Processing Control
Executive offers productivity gains in the development of applications
for the 8100/DPCX Information System. Running a host S/370, 4300
or 3000-Series Processor, DMS/DPCX assists the user in complete
application definition and subsequent maintenance. The DMS/DPCX
generated applications execute on 8100/DPCX systems. DMS/DPCX
minimizes the data processing experience and aptitude required to
generate new application programs. Programmers can use DMS/DPCX
to develop application programs with a minimum learning period.
Complete applications are generated into source code for the
8100/DPCX system. As application complexity increases, so does the
requirement for DP expertise. DMS/DPCX is a member of the
Cross-System Generator Set of programs which also contains
DMS/DPPX and DMS/CSP. Each of these program products share a
common, proven architecture and all are highly compatible in their
implementation. They are all intended to simplify application development and increase programmer productivity.
VM/SYSTEM EXTENSIONS
5748-XE1
VM/System Extensions provides performance and usability extensions
to VM/370 as described in the VM/370 SCP section. This support is
recommended primarily for users running MVS, SVS or VS1 under
VM/370, users with the 2305-11 fixed head storage device for paging,
and/or CMS intensive users on S/370 mdls 15511 or above.
VM/System Extensions Release 1 Modification Level 1 requires
VM/370 Release 5 as a base. VM/System Extensions Release 2
requires VM/370 Release 6 as a base.
P55.53
Aug 83
New
--------.! =:: :5~5: ISG
-
PS S.54
Do not reproduce without written permission
Aug 83
PRODUCT SUMMARY - SOFTWARE
VM/DIRECTORY MAINTENANCE
574S-XE4
The manual procedures to maintain the VM Directory have been
cumbersome, time consuming and error prone. The objective of
VM / Directory Maintenance is to provide efficient, easy-to- use, and
secure interactive facilities to address these problems.
VM/370 REMOTE SPOOLING COMMUNICATIONS
SUBSYSTEM (RSCS) NETWORKING
574S-XP1
This product permits CMS users to transmit jobs to other systems for
execution. Output may occur at the other system, or on the VM/370
System unit record devices. Remote users may transmit jobs for
execution to a CMS batch virtual machine, and can specify that the
output can be sent to any terminal or system defined on the network.
This product can be used to submit jobs for execution in other batch
systems (DOS/VSE, OS/VS) running in a virtual machine. If the other
batch systems support the NJE/NJI protocol, output can be directed to
any virtual machine or system defined in the network.
VM/CMS - 3270 DISPLAY SUPPORT and
STRUCTURED PROGRAMMING FACILITY
SPF/CMS (574S-XT3)
VM/CMS - 3270 Display Support and Structured Programming Facility
is functionally equivalent to Version 2.2 of the SPF /TSO program
product. The two programs are fully compatible in display formats and
operation, except for those features which are explicitly oriented to the
VS2/TSO or VM/CMS environment. SPF/CMS also includes a utility
which permits transfer of SPF program libraries from VS2/TSO to
VM/CMS.
DISPLAY MANAGEMENT SYSTEM/CMS
RELEASE 2
DMS/CMS (574S-XXB)
Display
Management System/CMS
provides display-oriented
interactive function to the CMS user. DMS/CMS requires VM/370
Release 6 and VM/Basic System Extension, VM System Extensions or
VM /System Product as prerequisites.
VM/INTERACTIVE FILE SHARING
574S-XXC
VM/lnteractive File Sharing is designed primarily for CMS users. It
provides (1) the capability of sharing user VSAM data sets among
multiple CMS virtual machines in a single processor and (2) significant
usability enhancements for VSAM/AMS users. VM/lnteractive File
Sharing requires VM/370 Release 6, VSE/VSAM Release 1 and
VM/370 Basic System Extensions Release 2 as prerequisites.
DOCUMENT LIBRARY FACILITY
RELEASE 1 (574S-XXE)
The Document Library Facility (the library) is a service program that
supports the storage of text documents and other types of data. It
operates in a batch environment under OS/VS2 (MVS), OS/VS1 or
DOS/VS and uses the Virtual Storage Access Method (VSAM). When
installed with the Document Composition Facility (5748-XX9), it
enables the SCRIPT /VS Formatter to run as a batch job in these
environments. The Foreground Environment feature of the Document
Composition Facility is not required.
DOCUMENT LIBRARY FACILITY
RELEASE 3 (574S-XXE)
The Document Library Facility (the library) is a service program that
supports the storage of text documents and other types of data. It
operates in a batch environment under OS/VS2 (MVS) or VSE and uses
the Virtual Storage Access Method (VSAM). When installed with the
Document Composition Facility (5748-XX9), it enables the SCRIPT /VS
Formatter to run as a batch job in these environments. The Foreground
Environment feature of the Document Composition Facility is not
required.
DISTRIBUTED SYSTEMS EXECUTIVE
DSX RELEASE 2.2 (574S-XXG)
Distributed Systems Executive (DSX) is a set of programs and files that
give 8100 Information System and 3790 network users a simple,
comprehensive and effective means of data and network management.
DSX combines, in one product, the host libraries, holding files and
control files, and the transmission, formatting and reporting functions
needed for library and transmission control in 8100 and 3790 networks.
New
GRAPHICAL DATA DISPLAY MANAGER (GDDM)
RELEASE 3
PRESENTATION GRAPHICS FEATURE (PGF) and
INTERACTIVE MAP DEFINITION (lMD)
574S-XXH
The term GDDM is used generically to include GDDM Base, IMD, and
PGF, as appropriate. GDDM provides advanced function device
support which reduces apparent complexity for the user who is creating
screen and printer layouts.
SQL DATA SYSTEM (SQL/DS)
VERSION 1 RELEASE 2
574S-XXJ
SOLI OS provides relational data base management facilities for
customers executing in the VM/SP Release 3, VSE AF Release 3, and
SSX/VSE Release 2 environments. SOL/OS provides multi-user
read/write sharing of a data base. It also provides online query/report
writing facilities, and operates with, and extends the capabilities of
IBM's data systems offerings. Release 2 contains all of the functions
currently available in Release 1 (which executes in the native VSE
environment).
VS BASIC
574S-XX1
VS BASIC is a language processor which provides a problem solving
capability in both interactive and batch environments. The BASIC
language is relatively easy to learn and easy to use. Its simplicity has
broad appeal to non-computer professionals (business analysts,
engineers, scientists, students, etc.) as well as to the professional
programmer. The language is widely used as a problem solving tool
across a broad range of scientific and business oriented applications.
VS BASIC is designed to operate in virtual storage systems. It will
operate in the time-sharing environments CMS (Conversational Monitor
System) of VM/370, TSO (Time Sharing Option) under OS/VS2 (SVS
and MVS) and VSPC (Virtual Storage Personal Computing) under
OS/VS1, OS/VS2 (MVS) and DOS/VS. It also operates as a batch
compiler under control of OS/VS1, OS/VS2 (SVS and MVS), DOS/VS
and CMS Batch.
CHAINED FILE - DL/I BRIDGE
DOS/VS and OS/VS (574S-XX3)
The Chained File - Dl/ I Bridge provides assistance in converting data
base applications to Data language/I (DL/I) from current chained file
systems.
INTERACTIVE INSTRUCTIONAL SYSTEM
574S-XX6
The Interactive Instruction System provides a realtime training and
instructional capability for course creation and presentation by utilizing
available Data Base/Data Communication Systems (lMS/VS and
CICS/VS), Interactive Systems (CMS and TSO) and Terminal Access
Methods (VTAM and TCAM). No modification is necessary to the
programs of the host system. The Interactive Instructional Systems
provides an environment in which users create, execute, maintain and
administer a realtime training system. They can use their existing data
processing equipment and teleprocessing terminal network for online
training or instructional applications while at the same time executing
other telecommunications programs.
VM/BASIC SYSTEM EXTENSIONS
574S-XXS
VM/Basic System Extensions is designed for use by DOS/VS,
DOS/VSE, VS1 and MVS users running under VM/370, and/or CMS
users running on S/370 mdls 135, 135-3, 138, 145, 145-3, 15511, 158,
158-3, 158AP, 158MP (in uniprocessor mode and in MP mode with I/O
attached to only one side), 16511, 168, 168-:3, 168AP, 168MP (in
uniprocessor mode and in MP mode with I/O attached to only side),
3031, 3031AP, 3032, 3033, 3033AP and 3033MP (in uniprocessor
mode and in MP mode with I/O attached to only one side) and on the
4321, 4331 and 4341 Processors.
--- -----
Do not reproduce without written permission
:: - -~~~ ISG
PRODUCT SUMMARY - SOFTWARE
DOCUMENT COMPOSITION FACILITY
RELEASE 2 (5748-XX9)
Document Composition Facility is a text processing application that
promotes the use of computers in the preparation of printed materials.
The Document Composition Facility consists of two parts: A formatter
and general purpose document processor called SCRIPT /VS, and an
optional feature called the Foreground Environment feature. This
optional feature enables the base program, SCRIPT /VS, to be used
with the OS/VS2 (MVS) Time Sharing Option (TSO)' the Advanced
Text Management System-III Release 1.0 under CICS/VS, and the
VM/370 Conversational Monitor System (CMS). The use of
SCRIPT /VS in a batch environment requires the Document Library
Facility program product.
DOCUMENT COMPOSITION FACILITY
RELEASE 3 (5748-XX9)
Document Composition Facility is a text processing application that
promotes the use of computers in the preparation of printed materials.
The Document Composition Facility consists of two parts: A formatter
and general purpose document processor called SCRIPT /VS, and an
optional feature called the Foreground Environment feature. This
optional feature enables the base program, SCRIPT /VS, to be used
with the OS/VS2 (MVS) Time Sharing Option (TSO), the Advanced
Text Management System-III Release 2.0 under CICS/VS, and the
VM/370 Conversational Monitor System (CMS). The use of
SCRIPT /VS in a batch environment requires the Document Library
Facility program product.
VIRTUAL MACHINE FACILITY
VM/370 (5749-010)
Virtual Machine Facility /370 (VM /370), a multiple-access system for
S/370 mdls 135, 135-3, 138, 145, 145-3, 148, 15511, 158, 158AP,
16511, 168, 168AP, the 3031, 3031AP, 3032, 3033, 4321, 4331 and
4341 Processors contains four major elements: [1] A control program,
CP, which controls the resources of the real computer to provide
mUltiple virtual machines. Each virtual machine can run a different
operating system such as OS (jVS), DOS (/VSl, CMS, and RSCS and
can provide virtual storage support for operating systems that do not
offer such support, [2] The Conversational Monitor System, CMS, a
component that gives users a wide range of conversational facilities
including creation and management of files and compilation, testing,
and execution of problem programs, [ 3] The Remote Spooling
Communications Subsystem, RSCS, a component that enables users to
transmit files to and receive files from remote stations in the RSCS
teleprocessing network, [4] The Interactive Problem Control System,
IPCS, a component that enhances the support of VM/370 by providing
interactive online facilities for problem management, problem determination and problem isolation. VM/370 also supports the S/370 mdls
158AP, 168AP, 3031AP and 3033AP. S/370 mdls 158MP, 168MP,
4321, 4331 and 4341 are also supported but only when running in
uniprocessor mode or with an asymmetric I/O configuration. In an
asymmetric I/O configuration, all I/O attached to the system must be
attached to one processor. Operation of VM/SP on a 4321 processor
is recommended in a VM/CMS-only environment.
OPERATING SYSTEM/VIRTUAL STORAGE 2
OS/VS2 (5752-VS2)
OS /VS2 (also known as VS2) is an operating system, upward
compatible from MFT, MVT and OS/VS1. OS/VS2 Release 1 (SVS)
makes available a single address space of 16 megabytes for programs
and data. In MVS (VS2 Release 2 and subsequent MVS releases), each
job or timesharing user is provided with individual 16 megabyte virtual
address space. The 16 me9abytes include the space required for
system code and tables. OS/VS2 Release 2 supports the S/370 mdls
145, 148, 15511, 158, 16511, 168 and the 3031, 3032 and 3033
Processors.
In
addition,
MVS
supports
the
158MP,
168MP, 158AP, 168AP and 3031AP systems.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DPPX ASSEMBLER
DPPX/ASM (5760-AS1)
DPPX Assembler translates source programs written in DPPX
Assembler language into 8100 Information System machine language
and processes macro instructions, both user-written and those that are
included with Distributed Processing Programming Executive
(DPPX/ BASE, 5760-010), or Distributed Processing Programming
Executive/System Product (DPPX/SP, 5660-281).
PS S.55
Aug 83
New
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
COBOL COMPILER and RUNTIME LIBRARY
DPPX/COBOL COMPILER (5760-CB1)
DPPX/COBOL RUNTIME LIBRARY (5760-LB1)
DPPX/COBOL offers a COBOL compiler and a runtime library
containing reentrant routines which support arithmetic, logic, and data
conversion, as well as input and output operations.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PARAMETER TABLE GENERATION FACILITY
FOR THE 3644 AUTOMATIC DATA UNIT
DPPX/GEN3644 (5760-ED1)
The DPPX Parameter Table Generation Facility, executing on an 8100
Information System with the Distributed Processing Programming
Executive Base (DPPX/BASE) or Distributed Processing Programming
Executive/System Product (DPPX/SPl, provides an efficient means for
customizing the 3644 Automatic Data Unit. This customization consists
of selecting 3644 functions and specifying the initial values of stored
data items. DPPX/GEN3644 translates the customization data
(developed on worksheets) into the format necessary for transmission
to the 3644. Translation is performed by editing the source data and
converting it into a parameter table format for loading into the 3644.
The resulting parameter table works with the 3644 microcode provided
by IBM.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
FORTRAN COMPILER and LIBRARY
DPPX/FORTRAN COMPILER (5760-F01)
DPPX/FORTRAN LIBRARY (5760-LM1)
DPPX/FORTRAN is a high-level mathematically-oriented programming
language suited to manipulations of numerical data and formatted
input/output operations on the 8100 Information System with
Distributed Processing Programming Executive Base (DPPX/BASE)
licensed program or DPPX/SP. DPPX/FORTRAN provides high-level
language support for scientific and engineering applications.
DPPX/FORTRAN can also be used in a wide range of other application
areas for general problem solving.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PL/I COMPILER and LIBRARY (DPPX PL/I)
DPPX PL/I COMPILER (5760-Pl1)
DPPX PL/I LIBRARY (5760-LM2)
DPPX PL/ I offers a compiler and library to support the use of the PL/ I
language with 8100/DPPX or DPPX/SP. PL/I is a programming
language designed for applications that involve the manipulation of
numerical and non-numerical data. The program compiled by the DPPX
PL/I Compiler and the DPPX PL/I Library routines they invoke are
reentrant, and can be used with other DPPX or DPPX/SP programs to
give access, for example, to interactive, data base, and presentation
services provided by DPPX program products.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DATA STREAM COMPATIBILITY
DPPX/DSC (5760-RC1)
This DPPX licensed program allows certain keyboard/displays, printers
and selected controllers and communication systems attached to the
8100 communication system with Distributed Processing Programming
Executive Base (DPPX/BASE) to communicate with S/370, 303X or
4300 hosts as though they were directly attached by data link to the
host processor.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DPPX SORT/MERGE
DPPX/SORT (5760-SM1)
The DPPX Sort/Merge is a sort product for the 8100 Information
System that runs under control of the Distributed Processing Program
Executive Base (DPPX/BASE) and provides users with facilities for
extracting data from their data sets and sequencing it. It is designed to
address the users' needs not only for straightforward sorting and
merging of records of a single type but also for related tasks such as
selecting certain records from one or more files and handling multiple
record types (records which do not have their fields - for instance their
sort keys - in the same position) as well as ordering according to
user-specified collating sequences.
---------- ----
= - -:§~§: ISG
Do not reproduce without written permission
PS S.56
Aug 83
PRODUCT SUMMARY - SOFTWARE
New
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DATA BASE and TRANSACTION MANAGEMENT SYSTEM
DPPX/DTMS (5760-TD1)
8100 INFORMATION SYSTEM
DPPX/BASE COMMAND FACILITY
EXTENSIONS FEATURE
5760-010 FEATURES #6005, #6006, #6007
Distributed Processing Programming Executive Data Base and
Transaction Management System (DPPX/DTMS) is the data management and transaction management system that provides ease-of-use
facilities for the 8100 Information System application programmers and
system programmers in the online transaction-oriented environment.
DPPX/DTMS operates under the control of Distributed Processing
Programming Executive Base (DPPX/BASE). The facilities provided by
DPPX/DTMS are designed to enable the programmers to concentrate
on application system program development rather than data and
transaction management.
The DPPX/ BASE Command Facility Extensions feature is a prerequisite
for the DPPX/lnteractive Productivity Facility. It provides the logic,
display and table management services for DPPX/lnteractive Productivity Facility operation and use. The DPPX/BASE Command Facility
Extensions feature Level 2 will provide a dialog development facility
which simplifies the development of dialogs and the installation of
customer-developed dialog hierarchies. It is a prerequisite for
DPPX/lnteractive Productivity Facility Release 2.
DPPX/BASE
Command Facility Extensions feature Level 2 is a complete replacement
of DPPX/BASE Command Facility Extensions feature Level 1 and will
delete all Level 1 modules and catalogs. DPPX/BASE Command
Facility Extensions feature Level 2 is intended for systems operations
usage and is not designed for application development.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
REMOTE JOB ENTRY WORKSTATION FACILITY
DPPX/RJE (5760-XC1)
DPPX Remote Job Entry Workstation Facility (DPPX/RJE) permits the
8100 Information System to function as a multi-leaving or multiple
logical unit remote job entry workstation for submitting jobs to a host
S/370 or 4300 for execution under OS/VS, DOS/VS, DOS/VSE and
VM/370 operating systems with a job entry subsystem installed.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
APL (DPPX APL)
5760-XR2
The DPPX APL program product provides the APL programming
language for use on the 8100 Information System. DPPX APL supports
application program development and personal computing in the
distributed data processing environment. DPPX APL complements VS
APL on the host with local APL processing of local data. DPPX APL
enables users to write, debug and execute APL programs - from
informal casual programs to full size interactive application programs
using local data bases.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
PERFORMANCE TOOL (DPPX/PT) MONITOR
with REPORTER FEATURE
DPPX/PT RELEASE 2 (5760-XR5)
The DPPX/PT Monitor, together with the DPPX/PT Reporter feature, is
a program that monitors and reports on the activity of components of
the Distributed Processing Programming Executive Base (DPPX/BASE),
the Distributed Processing Programming Executive/ System Product
(OPPX/SP), and DPPX Data Base and Transaction Management
System (DPPX/DTMS) programs. The DPPX/PT Monitor is a program
which collects performance data. The DPPX/PT Reporter feature is a
program that generates reports on the basis of the data collected by the
DPPX/PT Monitor. The regular use of DPPX/PT can provide a basis
for performance management of an 8100 DPPX or DPPX/SP system.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTI"VE
DATA CAPTURE and MANAGEMENT SYSTEM
DCMS/DPPX RELEASE 1 (5760-XR6)
This licensed program is a data entry package for users of the 8100
Information System that simplifies the design, setup, and execution of
the user's data entry applications. The DCMS/DPPX licensed program
consists of an interactive job definition program, an online executor for
data capture, and two batch utility programs for DCMX/DPPX local
data interchange and statistical recording.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING PROGRAMMING EXECUTIVE
DPPX/BASE (5760-010)
The following paragraphs contain general information pertaining to
DPPX/BASE through the Functional Enhancements Package 5 (FEP 5)
service level. DPPX/BASE is designed for distributed data processing
applications running on 8100 Information Systems. It provides
multi-programming, multi-user and multi-level system support for
concurrent application environments. Interactive, batch, and plant floor
applications are supported. DPPX/BASE provides a variety of
functions to communicate with S/370, 4300, other 8100 systems, and
terminals. There are facilities to simplify installation, application design,
program development and system operation. DPPX/ BASE provides
general usage system support which may be tailored or modified to suit
unique user requirements.
8100 INFORMATION SYSTEM
DISTRIBUTED PROCESSING CONTROL EXECUTIVE
VERSION 1 RELEASE 1 (DPCX)
5761-DS1
The 8100 Information System, under control of the Distributed
Processing Control Executive (DPCX), offers to the user a programmable multi-application display oriented system. It primarily provides the
functions for interactive processing at distributed sites as well as
between the host and distributed sites. With DPCX, the user may start
utilizing the system in 3270 Data Stream Compatibility mode for
existing 3270/SNA applications and progress to distributed processing
by adding store and forward processing, RJE, and Host interactive
processing such as inquiry and update of IMS/VS or CICS/VS data
bases. DPCX, which is based upon the field tested 3790 control
program, gives 3790 users a growth path with enhanced support for
performance, installability, usability and serviceability.
DISTRIBUTED PROCESSING CONTROL EXECUTIVE__
VERSION 1, RELEASE 2.2 and 3
DPCX (5761-DS1)
DPCX offers users a multi-application display oriented operating
system designed for the distributed environment. It provides functions
especially designed for combined text and data processing applications
with local and host interactions. With up to 31 concurrent applications
multiprogrammed by DPCX in Release 2 and 62 in Release 3, a wide
variety of office needs can be satisfied. The user can start to use the
system without user programming. Integral to DPCX are 3270 Data
Stream Compatibility for access to existing host applications, online
bulk print for outputting host data and a comprehensive RJE facility. A
text system application program, the Distributed Office Support Facility
(DOSF) is available which has extensive functions without the need for
user programming. In addition, applications and procedures can be
developed for both DPCX and DOSF expanding the usefulness of the
distributed system. DPCX Release 2 has been developed specifically to
extend DPCX Release 1 for both data processing and text applications.
It includes all the functions of Release 1 and provides enhancements.
Feature #6001 is available and is enhanced. In particular, the new
functions provide the installation with the ability to better balance the
system against the demands of multiple applications. DPCX Release 3
is designed to take advantage of the increased storage and performance improvements available with the 8140 model C processor. It also
increases the allowable number of concurrent active user tasks from 31
to 62, providing improved system flexibility; supports data link attached
loops and new printer functions; provides a new network installation
management capability; and contains several usability and serviceability
enhancements. Feature #6001 is integrated into Release 3, simplifying
both the ordering and installation processes.
8100 DISTRIBUTED OFFICE SUPPORT FACILITY (DOSF)
RELEASES 2 and 3
5761-XR1
DOSF is a DPCX system application designed to meet company-wide
requirements for document creation, revision, formatting, storage,
retrieval, printing, archiving and host transfer. DOSF supports the
development of office correspondence, business related documents and
automated text generation using local data.· DOSF aiong with the other
components of the Distributed Office System provides a host document
data base with search, retrieval and archiving capabilities; and
document exchange capability with other host text processing
programs. In addition to these comprehensive functions available
without user programming, the user can write text application programs
to enhance capability. DOSF executes with the DPCX operating system
which provides extensive data processing and I/O device attachment
capability. Thus, DOSF is a component of a distributed system ready to
meet today's office needs in text and data processing.
------- - - - -:: - - :§-=f§: ISG
Do not reproduce without written permission
PRODUCT SUMMARY - SOFTWARE
IBM TYPOGRAPHIC FONTS FOR THE 4250 PRINTER
ITC AVANT GARDE GOTHIC ... 5771-AAA*
MONOTYPE BASKERVILLE ... 5771-AAB**
MONOTYPE BODONI ... 5771-AAC**
CANDIDA ... 5771-AAD***
MONOTYPE CENTURY ... 5771-AAE**
MONOTYPE CENTURY SCHOOLBOOK ... 5771-AAF**
EXCELSIOR ... 5771-AAG+
FUTURA ... 5771-AAH++
MONOTYPE GARAMOND ... 5771-AAJ**
HELVETICA ... 5771-AAK+
OPTIMA ... 5771-AAL+
PALATINO ... 5771-AAN+
MONOTYPE ROCKWELL ... 5771-AAP**
ITC SOUVENIR ... 5771-AAQ*
MONOTYPE TIMES NEW ROMAN ... 5771-AAR**
UNIVERS ... 5771-AAT +
TYPEWRITER and PI ... 5771-AAW
Provides a wide selection of digitized, typographic quality fonts for use
by the 4250 Printer.
Typeface names are registered trademarks of the following enterprises:
International Typeface Corporation.
Monotype Corporation Ltd.
Ludwig and Mayer GmbH & Co.
+ Mergenthaler Linotype Co.
++ Fundicion Tipografica Neufville, S.A.
TELEX SUPPORT for
DISTRIBUTED OFFICE SUPPORT SYSTEM
5785-DEP
Telex Support for Distributed Office Support System provides an
interface between DISOSS and a telex network with the following
functions: External distribution ... DISOSS Telex-out online processor
... DISOSS Telex-in online processor ... DISOSS Telex-in filing and
internal distribution ... DISOSS Telex batch processors.
P88.57
Aug 83
New
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Create Date : 2013:04:04 07:23:50-08:00 Modify Date : 2013:04:04 08:48:45-08:00 Metadata Date : 2013:04:04 08:48:45-08:00 Producer : Adobe Acrobat 9.52 Paper Capture Plug-in Format : application/pdf Document ID : uuid:d50fbf81-362b-424d-a091-621ff4c86c12 Instance ID : uuid:7c8cef00-9175-4b5d-82d3-678cae1fefd2 Page Layout : SinglePage Page Mode : UseNone Page Count : 57EXIF Metadata provided by EXIF.tools