1073. COLOUR CONTROL CAMERA KIT
User Manual: 1073. COLOUR CONTROL CAMERA KIT
Open the PDF directly: View PDF 
.
Page Count: 1
REF. 01073
COLOUR CONTROL CAMERA KIT
This equipment makes it possible to extend the audio/video door entry installation
with a 2nd additional aerial camera which can be viewed from the monitor of the
home where it is installed.
This application is useful to watch the back of the house in villas, monitor the access
door from a high position, with a perfect view of the person entering the villa from an
additional angle to the camera located in the outdoor panel, check the garage... etc.
The aerial camera is manufactured in Zamak and 2.5 mm thick impact resistant
polycarbonate glass. The special chassis forming a 90º angle and its reversible wall support mean it can be anchored on
all types of ceiling profiles, walls, corner units, at a 45º angle, etc. Requires scene illumination.
COLOUR TV camera with built
-
in lighting and pan&tilt regulation system to adjust the camera lens. For video door entry
system installations with colour monitor.
TECHNICAL SPECIFICATIONS
Power supply: 15
-
20 Vdc.
Consumption:
In standby: 7 mA.
Active: 210 mA.
Aerial Camera
-
Power supply: 12 Vdc.
-
Camera Lens: 3.6 mm. focal distance.
-
Compound video output: 1 Vpp.
-
Resolution: 450 lines (H) x 380 lines (V).
-
Sensitivity: 1 lux. Lighting required for night vision.
Adaptor module
This device is used to power 12 Vdc cameras from the general power supply.
of the video door entry system installation (18 Vdc).
Operating temperature:
-
10 to 60°C.
Installation: Maximum distance: 200 metres (without amplification).
Power supply: 18 Vdc
Consumption: 150 mA.
Pan&tilt: 10º
V, M: Impedance 75 Ohm 1 Vpp
Size of product when packed: 25x23,5x7
Weight: 1,25 kg
EAN 13: 8424299010731
