1207 MI

User Manual: Home

Open the PDF directly: View PDF PDF.
Page Count: 2

Qualified, IEC 61215
Safety tested,
IEC 61730
Periodic inspection
Mechanical Characteristics
Dimensions 987 mm (38.86”) (W) × 1,965.5 mm (77.38”) (L) × 50 mm (1.97”) (H)
Weight Approx. 29.0 kg (63.9 Ibs)
Solar cells 72 cells in series (6 × 12 matrix)
Output cables 4 mm2 (12AWG) cables with polarized weatherproof connectors,
IEC certied (UL listed), Length 1.2 m (47.2”)
Junction box IP65, weatherproof, IEC certied (UL listed)
Bypass diodes 3 bypass diodes to prevent power decrease by partial shade
Construction Front : High transmission low-iron tempered glass, 4.0 mm (0.157”)
Encapsulant : EVA Back Sheet : Weatherproof lm
Frame Clear anodized aluminum alloy type
Hyundai
Solar Module
www.hyundaisolar.com
MI-Series Mono-crystalline Type
HiS-S290MI | HiS-S295MI | HiS-S300MI | HiS-S305MI
Multi-crystalline Type
HiS-M275MI | HiS-M280MI | HiS-M285MI | HiS-M290MI | HiS-M295MI
High Quality
• IEC 61215 (Ed.2) and IEC 61730 by TÜV Rheinland
• UL listed (UL 1703), Class C Fire Rating
• Output power tolerance +3/-0 %
• ISO 9001:2000 and ISO 14001:2004 Certified
Advanced Mechanical Test (5,400 Pa) Passed (IEC)
/ Mechanical Load Test (40 lbs/ft2) Passed (UL)
• Ammonia Corrosion Resistance Test Passed
Fast and Inexpensive Mounting
• Delivered ready for connection
• Pre-confectioned cables
• IEC (UL) certified and weatherproof connectors
• Integrated bypass diodes
Limited Warranty
• 10 years for product defect
• 10 years for 90 % of warranted min. power
• 25 years for 80 % of warranted min. power
Important Notice on Warranty
The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s
logo (shown below) and product serial number on it.
Electrical Characteristics
All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
| Multi-crystalline Type |
HiS-M
MI
275 280 285 290 295
Nominal output (Pmpp) W 275 280 285 290 295
Voltage at Pmax (Vmpp) V 36.3 36.5 36.7 37.0 37.3
Current at Pmax (Impp) A 7.6 7.7 7.8 7.9 7.9
Open circuit voltage (Voc) V 44.0 44.4 44.7 45.1 45.4
Short circuit current (Isc) A 8.2 8.3 8.3 8.3 8.3
Output tolerance % +3/-0
No. of cells & connections pcs 72 in series
Cell type - 6” Multi-crystalline silicon
Module eciency %14.2 14.4 14.7 14.9 15.2
Temperature coecient of Pmpp %/K -0.43 -0.43 -0.43 -0.43 -0.43
Temperature coecient of Voc %/K -0.32 -0.32 -0.32 -0.32 -0.32
Temperature coecient of Isc %/K 0.048 0.048 0.048 0.048 0.048
| Installation Safety Guide |
• Only qualified personnel should install or perform maintenance.
• Be aware of dangerous high DC voltage.
• Do not damage or scratch the rear surface of the module.
• Do not handle or install modules when they are wet.
Nominal Operating Cell Temperature 46˚C ± 2
Operating Temperature -40 - 85˚C
Maximum System Voltage DC 1,000 V (IEC)
DC 600 V (UL)
Maximum Reverse Current 15 A
HiS-S
MI
290 295 300 305
Nominal output (Pmpp) W 290 295 300 305
Voltage at Pmax (Vmpp) V 37.0 37.2 37.4 37.6
Current at Pmax (Impp) A 7.9 8.0 8.0 8.0
Open circuit voltage (Voc) V 45.0 45.1 45.4 45.6
Short circuit current (Isc) A 8.3 8.4 8.4 8.4
Output tolerance % +3/-0
No. of cells & connections pcs 72 in series
Cell type - 6” Mono-crystalline silicon
Module eciency %14.9 15.2 15.5 15.7
Temperature coecient of Pmpp %/K -0.45 -0.45 -0.45 -0.45
Temperature coecient of Voc %/K -0.33 -0.33 -0.33 -0.33
Temperature coecient of Isc %/K 0.032 0.032 0.032 0.032
| Mono-crystalline Type |
1,965.5 (77.38”)
987 (38.86”)
50 (1.97”)
654.8 (25.78”)
935 (36.81”)
246.5 (9.7”)
1,100 (43.3”)
4 (0.15”)
18 (0.7”)
50 (1.96”)
9 (0.35”)
8.5 (0.33”)
26 (1.02”)
35 (1.38”)
12 (0.47”)
432.8 (17.03”)
A
B
C
C'
4-Ø4.2 THRU
GROUND HOLE
GROUND MARK
1,200 mm
4 mm2
CABLE AND
CONNECTOR
1,200 mm
4 mm2
CABLE AND
CONNECTOR
(+)
(-)
SECTION C-C'
DETAIL A
DETAIL B
4-Ø7 SLOT THRU
0
1
2
3
4
5
6
7
8
9
10
01020304050
Operating Cell Temp = 5˚C
Operating Cell Temp =
25
˚C
Operating Cell Temp =
45
˚C
Operating Cell Temp =
65
˚C
0
1
2
3
4
5
6
7
8
9
0510 15 20 25 30 35 40 45 50
Incid. Irrad =
1,000
W/m
2
Incid. Irrad =
800
W/m
2
Incid. Irrad =
600
W/m
2
Incid. Irrad =
400
W/m
2
Incid. Irrad =
200
W/m
2
Voltage [V]
Current [A]
Voltage [V]
Current [A]
Incid. Irrad = 1,000 W/m2
Cell temp.
= 25
˚C
| Module Diagram | | I-V Curves |
(unit : mm, inch)
[ Printed Date : July 2012 ]
Sales & Marketing
12th Fl., Hyundai Bldg., 75, Yulgok-ro, Jongno-gu, Seoul 110-793, Korea
Tel : +82-2-746-8406, 7422, 8525 Fax : +82-2-746-7675

Navigation menu