Part Numbers & Prices Vectra Machines MSRP 66730 1450 Parts List

User Manual: 66730

Open the PDF directly: View PDF PDF.
Page Count: 5

Vectra On-Line 1450 Part Numbers and Prices Page 1
Vectra On-Line 1450
Part # Part Description
57900 Access Door (painted)
2.5AO Add-on plate- 2.5 pound
5.0AO Add-on plate- 5 pound
66960 Anchor, Cable End
57580 Bar/Shaft- bench where seat bottom and seat back weldments join and pivot
54760 Bar/Shaft- for press adjust- moves into notches (uses 54770 e-ring)
53770 Bar/Shaft- pivot for lat hold down
46140 Bearing- freeway bearing for 1450 main bench (leg developer)
11920 Bearing- freeway for most pivot points, used with #13790 button head bolts
46400 Bench Latch Pawl- slides into notches to adjust bench seat bottom height
65130 Bench Leg Dev Brng Assy
66340 Bench Maing Frame WLDMT
67250 Bench Pulley Assy
64010 Bench Roller, Wlmdt
46430 Bench Seat Adjust
62580 Bench Seat Back weldment (6-hole)
64890 Bench Seat Bottom weldment- has seat adjustment notches (starting in 2006)
52600 Bench Wheel Mount
67260 Bench, 1450 Assy
BFLY*** Bfly Option Kit (Need Machine Color/ Upholstery Color)
13790 Bolt- 1/2-13 X 1 button head for most freeway bearing pivot points
20850 Bolt- 1/4 X 20 X .75 for mounting upholstery
63330 Bolt- 1/4-20 joint connector to mount swivel pulleys (uses #63340 nut)
55870 Bolt- 3/8-16 x ½ blk hex with flange for frame & cable anchor (14 required)
45980 Bolt- 3/8-16 X 1.25 button head to mount 1450 leg developer
23300 Bolt- 3/8-16 X 1.25 to attach some pulleys (metal on 1 side)
52910 Bolt- 3/8-16 X 1.5 for columns, pulley assemblies (double, single, adj., etc.)
12760 Bolt- 3/8-16 X 1.75 for most pulley assemblies & column caps
59230 Bolt- 3/8-16 X 2.5 HEX used in bench pulley assembly (1)
29190 Bolt- 3/8-16 X 3 for top plate
55860 Bolt- 3/8-16 X 3/4 blk hex with flange for frame (10 required)
14210 Bolt- 3/8-16 X 4 for most adjustable pulleys
17080 Bolt- 5/16-18 X 1.5 for guide rod threaded inserts
59240 Bolt- 5/16-18 X 3 HEX used on 1450 bench wheel assembly
52730 Bracket- attached to cable end- hooks onto press adjust lever (used with #59090)
59890 Bracket- for double moving pulley stop assembly used in press post (2)
20000 Bracket- for double-moving pulley (2 required)
55070 Bracket- part of press adjustment assembly that goes into notches
59620 Bracket- used on bench wheel/spring assembly, unpainted, formed
23990 Bracket-High Pulley Cable Adj
66920 Brkt, Bench Pulleys
66940 Brkt, High Pulley Cable Adj
59120 Bumper- double stem for calf block and bench
57670 Bumper weight stack (
two required
)- replaces single piece 20750
54130 Bumper/Plug- 3/4 inch stem for b/fly cam
43780 Bushing- nylon for butterfly arm
24160 Bushing- nylon for pivot pulley
20620 Bushing- weight plate (all) & top plate
47930 Cable- 10-inch extension for low pulley
67130 Cable- 1450 high pulley- 76.80"
Prices are subject to change without notification. Vectra store price takes precedence.
Vectra On-Line 1450 Part Numbers and Prices Page 2
Vectra On-Line 1450
Part # Part Description
67150 Cable- 1450 Leg extenson to bench- 188.50"
67140 Cable- 1450 Low pulley- 322.63"
67120 Cable- 1450 stack- 68.50"
28840 Cable- butterfly station- 70.84" long
59090 Cable- press adjustment
67540 Cable Set/Kit- complete
17160 Cable Tie
63070 Cap, 1" Dia External Tube
65580 Close Grip Press Attachment- left-side
65570 Close Grip Press Attachment- right-side
CGPB
Close Grip Press Attachment Set- Black-
allows close grip exercises on press arms
CGPCP
Close Grip Press Attachment Set- Classic Pewter-
for close grip exercises on press arms
CGPSS
Close Grip Press Attachment Set- Sterling Silver-
for close grip exercises on press arms
CGPW
Close Grip Press Attachment Set- White-
allows close grip exercises on press arms
62730 Closure, 1.75 Dia Notched Tube
67170 Column Stack Assy 1450
67290 Corner to Main Frame/Tube assembly (D)- with pulleys, bearing, etc.
66730 Corner to Main Frame/Tube weldment (D)- without pulleys, bearing, etc.
67300 Corner to Press Frame/Tube assembly (C)- with pulley
66690 Corner to Press Frame/Tube weldment (C)- without pulley
12340 Cotter Pin- 3/16 X 1.5 inch for butterfly arms/cams (used w/#62850 washer)
67180 Cross Chest Arm Left
LEFT-SIDE
67190 Cross Chest Arm Right
RIGHT-SIDE
66260 Cross Chest Arm weldment-
LEFT-SIDE
66250 Cross Chest Arm weldment-
RIGHT-SIDE
63540 Curl Bar assembly- (straight) BLACK only
14180 Double Moving Pulley assembly- with pulleys & hardware
60270 Double Moving Pulley Stop assembly- special version used in 1450 press post
54770 E-Ring- 1/4 external used with 54760 shaft
17990 E-Ring 5/16 Shaft x .035 Thk
53790 E-Ring/Crescent-Ring- used with press adjustment lever assembly
59140 Felt- 1/16 X 2 X 3-13/16 used on bench (2)
59150 Felt- 1/16 X 2-3/4 X 3-1/4 used on top of bench pulley assembly
62140 Fly Pivot Attach weldment used on cross-chest arms
10340 Foam Roller
61960 Foot- 40 X 80 OB Bench
67080 Foot Anchor Lft
67090 Foot Anchor Rht
13240 Grip- 4 Inch for inner section of lat bar
61890 Grip- 8-inch "SS Cap" version- replaces #11760
54740 Guide- nylon, for cable press arm cables
55410 Guide Rods- 63.8 inches with spacer and screw for stack column
61990 Handle- Single Grip 14-inch strap
62000 Handle- Single Grip- 8-inch strap (replaces D-Handle) OPTIONAL
67230 Hardware/Bolt Kit- 1450
60880 High Pulley Adj Bracket
66470 High Pulley assembly
61880 Knob- bench adjust (yellow)
28020 Label- "Manufactured by..."
28010 Label- "Warning..." for wt. guard
Prices are subject to change without notification. Vectra store price takes precedence.
Vectra On-Line 1450 Part Numbers and Prices Page 3
Vectra On-Line 1450
Part # Part Description
48950 Label- "Warning…" for bench
61720 Label- 10-inch Silver Vectra (stack column)- companion to diamond label #65620
65620 Label- 1450 Diamond- companion to 10-inch silver
43820 Label- left-side squat
43830 Label- right-side squat
60600 Label- wt. stack number sheet standard stacks
66900 Label, Bench Seat Angle
62640 Lat Bar assembly
62680 Lat Hold Down Assy, Adj
62160 Lat Hold Down WLDMT
53930 Latch/Lever- current version for squat attachments (uses 54010 spring pin)
65140 Leg Developer- 1450
60010 Leg Developer Cam- 1450
59560 Leg Developer Strut- short, straight 1450
54050 Leg/Ankle Strap
59110 Lever- leg developer 1450- uses 59210 roll pin
52230 Lever- press adjust (include #53790 crescent ring when ordering)
52980 LHD Latch WLDMT
67320 Low Pulley assembly- 1450 (uses 4.5 inch pulley)
66220 Low Pulley WLDMT
67220 Low Row/Calf Block 1450
67240 Main Column assembly 1450- butterfly and lat stations
66420 Main Column weldment only- 1450 butterfly and lat stations
67070 Manual- 1450
66190 Member, High Pulley
63340 Nut- 1/4-20 joint connector- used to mount swivel pulley (used w/#63330 bolt)
58880 Nut- 10-24 with nylon insert- used with 58900 washer & 60330/58870 bolts
58920 Nut- 10-32 used on bench and as jam nut on press cable adjustment screw
50430 Nut- 5/16-18 hex locking for bench wheel bolt (59240)
10600 Nut- locking 3/8-16 hex for most pulley assemblies
1450BSOK Option Kit- Black
1450CPSOK Option Kit- Classic Pewter
1450SSOK Option Kit- Silver
1450WSOK Option Kit- White
61730 Pad, Lat Hold Down
53920 Pad, Leg Developer
57570 Padding- center of curl and lat bar, etc. (1 per bar)- replaces 23330
27990 Plug (Christmas tree)- black plastic for cable retainer openings
57080 Plug- 7/16 inch DIA black- used in press post
67060 Poster- 1450
64990 Press Arm/Press Handle assembly
58850 Press Arm/Press Handle weldment only
67160 Press Pick Up Assy
67310 Press Post assembly (L-shaped support)
67000 Press Post weldment
58910 Pulley- 2 inch used with bench pulley assembly
46060 Pulley- 3.5 Inch used in press post (2)
10580 Pulley- 4.5-inch
63080 Pulley Cable Stop- plastic-
66950 Rack, Adj Press Arm
Prices are subject to change without notification. Vectra store price takes precedence.
Vectra On-Line 1450 Part Numbers and Prices Page 4
Vectra On-Line 1450
Part # Part Description
20660 Retainer- for cable at top of weight stack
63940 Ring 25mm External Retaining
59210 Roll Pin- 5/16D X 1.875 used with leg developer lever and struts
27910 Roll Pin- 5/32D X 7/8L for swivel pulleys, butterfly arm pawls, etc.
63060 Roller, Bench Leg
59130 Safety Tread- calf/row block
59100 Safety Tread- squat foot plate (2 required)
60330 Screw- 10-24 X 3/4 phillips used for press cable guide at stack column
53710 Screw- 10-32 X 1.25 phillips for press adjust cable tension (uses #58920 jam nut)
14500 Screw, 1/4-20 x .50 BLK PHP ZN
66910 Screw, 3/8-16x3 Full Thrd ZN HX
20050 Screw, 5/16-18 x .75 HEX BLK
60610 Selector Pin- new style / can not be used with original plates
20630 Selector Shaft- for 210 pound weight stacks (20 hole)
46700 Selector Shaft- for light/160# weight stack (15 hole)
17750 Shaft Retainer- .5 shaft (large) for most shafts
60510 Single Moving Pulley assembly- with pulley & hardware- used in main/lat column
60500 Single Moving Pulley bracket- without pulley
16520 Spacer- .81 X .52 X .5 nylon for guide rods
52530 Spring- .42OD X 1.25" long for bench wheel assembly (2 required)
53990 Spring- both sides current version squat attachment latches (9/00)
27900 Spring- ext. 1.25FL for lat hold down, press handle & bench
59220 Spring- extension for 1450 leg developer
17930 Spring Pin- .25 X 2.75 for lat/leg hold down & press handle
54010 Spring Pin- 5/32 X 1-1/4 for current version squat latch (9/00)
41430 Squat Attachment- left-side
41440 Squat Attachment- right-side
67280 Squat Foot Plate/Platform- 1450
60700 Top Plate- weight stack
49090 Touch-Up Paint- Black bottle
20800 Touch-Up Paint- Black spray can
49100 Touch-Up Paint- Classic Pewter bottle
15520 Touch-Up Paint- Classic Pewter can
63360 Touch-Up Paint- Sterling Silver bottle
63350 Touch-Up Paint- Sterling Silver can
49080 Touch-Up Paint- White bottle
20790 Touch-Up Paint- White spray can
60080 Trim- 5/16 inch- for top of stack column
62940 Trim, 5/16 BLK Edge 19.70"
53940 Tube Closure/End Cap- 1 inch round for current squat attachments (9/00)
42250 Tube Closure/End Cap- 1.75 inch for end of press handle
51330 Tube Closure/End Cap- round single piece closure/retainer for foam rollers
11340 Tube Connector- 5/16-18 X 1" threaded insert for guide rods
62610 Upholstery- bench seat back
66580 Upholstery- full set
59200 Upholstery- seat back butterfly station 1450
43210 Upholstery- seat bottom bench
61330 Upholstery, Seat Bottom Butterfly
67270 Upper Stack Frame assly (gussett) w/upper pulley- bolts to stack column (part - R)
Prices are subject to change without notification. Vectra store price takes precedence.
Vectra On-Line 1450 Part Numbers and Prices Page 5
Vectra On-Line 1450
Part # Part Description
66990 Upper Stk Gusset WLDMT
50580 Washer- .438 X .322 X.020 for bench against wheel on bolt head side
59670 Washer- .5ID used w/button head bolt attaching press arm w/adjustment plate
46970 Washer- .688 X .39 X .03 black nylon for 1450 bench
42240 Washer- 3/8 blk SAE flat, for #14210 bolt in high pulley bracket (2 required)
12620 Washer- 7/8-16 X ½ X 14GA used on press post
26130 Washer- neoprene bumper for top plate- standard
17950 Washer- nylon for leg developer
58900 Washer- used with 58880 nut
62850 Washer/Bushing- 1-1/2 X 1 X 14GA for b/fly arms/cams (uset w/#12340 cotter)
60680 Weight Plate- 10 pound
60710 Weight Plate- box of five 10 pound plates
65470 Weight Stack Hardware Kit- 160 pound standard stack
60740
Weight Stack Hardware Kit- for
16UG21 Weight Stack Upgrade Kit to 210 pounds from 160 pounds
46440
Wheel- used on bench
Prices are subject to change without notification. Vectra store price takes precedence.

Navigation menu