National Certificate Or Diploma In Classification (Descriptor) (Level) With Strands 26939 1473

User Manual: 26939

Open the PDF directly: View PDF PDF.
Page Count: 5

NZQF NQ Ref
1473
Version
3
Page 1 of 5
Building and Construction Industry Training
Organisation
SSB Code 101562
New Zealand Qualifications Authority 2017
National Certificate in Design (Level 2) with strands in Kitchen Design,
and Bathroom Design
Level
Credits
This qualification has been reviewed. The last date to meet the requirements is 31
December 2019.
Transition Arrangements
Version 3 of this qualification was republished to extend the last date for entry into
programmes (enrolment) leading to this qualification from 31 December 2017 to 31
December 2018. The last date for assessment is unchanged.
This qualification has been reviewed and will not be replaced.
The last date for entry into programmes leading to this qualification is 31 December 2018.
The last date for assessment is December 2019.
For detailed information see Review Summaries on the NZQA website.
NZQF National Qualification Registration Information
Process
Version
Date
Last Date for Assessment
Registration
1
February 2009
December 2012
Review
2
July 2011
December 2019
Review
3
April 2016
December 2019
Republication
3
July 2017
December 2019
Standard Setting Body
Building and Construction Industry Training Organisation
PO Box 2615
Wellington 6140
Telephone 04 385 8814
Email
national.office@bcito.org.nz
Website www.bcito.org.nz
NZQF NQ Ref
1473
Version
3
Page 2 of 5
Building and Construction Industry Training
Organisation
SSB Code 101562
New Zealand Qualifications Authority 2017
National Certificate in Design (Level 2) with strands in Kitchen Design,
and Bathroom Design
Level
Credits
Purpose
This qualification is an entry qualification for people who want to work in the kitchen or
bathroom design sector.
People entering this qualification may hold the National Certificate in Joinery (Introduction)
[Ref: 0385] or the National Certificate in Design (Introductory Skills) (Level 2) [Ref: 0461].
The compulsory section of the qualification covers the knowledge and skills related to
solving kitchen or bathroom design problems, building construction, workplace health and
safety, providing customer service, and work documents.
The kitchen design strand covers the knowledge and skills related to cabinet installation,
surface materials, space planning and kitchen appliances and interpreting a design brief.
The bathroom design strand covers the knowledge and skills related to materials used in
bathroom design and interpret a design brief, and plumbing systems and their impact on
bathroom design.
This qualification may lead to the National Certificate in Design (Level 4) with strands in
Kitchen Design, and Bathroom Design [Ref: 1300].
Credit Range
Compulsory
Kitchen Design
Strand
Bathroom Design
Strand
Level 1 credits
3
-
-
Level 2 credits
13
20
18
Level 3 credits
12
-
-
Minimum totals
28
20
18
NZQF NQ Ref
1473
Version
3
Page 3 of 5
Building and Construction Industry Training
Organisation
SSB Code 101562
New Zealand Qualifications Authority 2017
Requirements for Award of Qualification
Award of NZQF National Qualifications
Credit gained for a standard may be used only once to meet the requirements of this qualification.
Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the
purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications
Authority (NZQA) website: http://www.nzqa.govt.nz/qualifications-standards/standards/standards-exclusion-
list/.
Reviewed standards that continue to recognise the same overall outcome are registered as new versions
and retain their identification number (ID). Any version of a standard with the same ID may be used to meet
qualification requirements that list the ID and/or that specify the past or current classification of the standard.
Summary of Requirements
• Compulsory standards
One of the following strands is required
• Kitchen Design Strand
• Bathroom Design Strand
Detailed Requirements
Compulsory
The following standards are required
Engineering and Technology > Design > Kitchen and Bathroom Design
ID
Title
Level
Credit
26934
Solve kitchen or bathroom design problems
3
12
26939
Create kitchen or bathroom sketches and concept
drawings
2
4
26945
Demonstrate knowledge of building construction for use
in a kitchen or bathroom design
2
2
Health > Occupational Health and Safety > Occupational Health and Safety Practice
ID
Title
Level
Credit
497
Demonstrate knowledge of workplace health and safety
requirements
1
3
Manufacturing > Glass and Glazing > General Glass and Glazing
ID
Title
Level
Credit
19605
Provide customer service in the glass, joinery or joinery
related industries
2
4
NZQF NQ Ref
1473
Version
3
Page 4 of 5
Building and Construction Industry Training
Organisation
SSB Code 101562
New Zealand Qualifications Authority 2017
Manufacturing > Joinery > Stairs and Other Joinery Trade Skills
ID
Title
Level
Credit
2545
Demonstrate knowledge of work documents in joinery
2
3
Kitchen Design Strand
The following standards are required
Engineering and Technology > Design > Kitchen and Bathroom Design
ID
Title
Level
Credit
25208
Demonstrate knowledge of cabinet construction,
installation and maintenance for use in a kitchen design
2
6
25209
Demonstrate knowledge of surface materials for use in
a kitchen design
2
6
25210
Demonstrate knowledge of space planning and kitchen
appliances for use in a kitchen design
2
8
Bathroom Design Strand
The following standards are required
Engineering and Technology > Design > Kitchen and Bathroom Design
ID
Title
Level
Credit
26937
Demonstrate knowledge of materials for use in
bathroom design and interpret a design brief
2
12
26938
Demonstrate knowledge of plumbing systems and their
impact on bathroom design
2
6
Transition Arrangements
Version 2
Version 2 was issued following a review.
Changes to structure and content
• Credit total was increased from 44 to 46-48.
• Two strands in Kitchen Design and Bathroom Design were added.
• Unit standards 1277, 2543, 7485, 22607, 24353 and 24361 were removed from the
compulsory section.
• Unit standards 497, 26934, 26939 and 26945 were added to the compulsory section.
• Unit standards 25208, 25209 and 25210 were moved from the compulsory section to
the Kitchen Design strand.
• Unit standard titles and credits were updated following review.
For detailed information see Review Summaries on the NZQA website.
People currently working towards version 1 of this qualification may either complete the
requirements of that version or transfer their results to this version of the qualification.
NZQF NQ Ref
1473
Version
3
Page 5 of 5
Building and Construction Industry Training
Organisation
SSB Code 101562
New Zealand Qualifications Authority 2017
Any candidate who feels that they have been disadvantaged by these transition
arrangements should contact the Joinery Industry Training Organisation at the address
given below.
Other standard setting bodies whose standards are included in the
qualification
New Zealand Industry Training Organisation
Certification
This certificate will display the logos of NZQA, the Joinery Industry Training Organisation
and the organisation that has been granted consent to assess against standards that meet
the requirements of the qualification (accredited).
Classification
This qualification is classified according to the classification system listed on the Directory
of Assessment Standards (DAS) and the New Zealand Standard Classification of
Education (NZSCED) system as specified below.
DAS Classification
NZSCED
Code
Description
Code
Description
53
Engineering and Technology >
Design
040107
Architecture and
Building>Architecture and Urban
Environment>Interior and
Environmental Design
Quality Management Systems
Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality
Assurance Body before they can register credits from assessment against standards. Organisation with
consent to assess and Industry Training Organisations assessing against standards must engage with the
moderation system that applies to those standards. Consent to assess requirements and the moderation
system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.

Navigation menu