15008 15008A

User Manual: 15008

Open the PDF directly: View PDF .
Page Count: 18

Download
Open PDF In Browser	View PDF

TECHNICAL SCHOOL

From the Principal’s desk
Take your next step now!

Follow through on your decision to
enhance your life and your future prospects
by enrolling in one of INTEC’s Draughting
courses today!

Why study with us?

•
•
•
•
•
•
•
•

Quality study material designed
specifically for home study.
The freedom to study at YOUR own pace, where and when it suits
YOU.
The widest range of courses for today’s world.
Free consultations with INTEC’s career counselling and
development specialists.
Free study choice advice from INTEC’s Student Consultants.
The convenience of online enrolment, contact and advice.
Affordable, easy payment options.
Ongoing study support and attention from qualified tutors.

Draughting

Umalusi Accreditation

INTEC College (Pty) Ltd has been awarded provisional accreditation by Umalusi.
Umalusi is the Council for Quality Assurance in General and Further Education
and Training in South Africa - see www.umalusi.org.za
Umalusi Provisional Accreditation No.: FET 00037 PA.

DHET Registration
INTEC College (Pty) Ltd has been granted provisional registration by the
Department of Higher Education and Training as a private FET College,
until 31 December 2014.
Provisional registration No. 2008/FE07/025 - see www.dhet.gov.za. For further
information please refer to our website: www.intec.edu.za
INTEC College (Pty) Ltd is committed to meeting legislative requirements
regarding accreditation and registration of private education and training
providers in South Africa.
Wishing you every success in your studies and your future!

Phillip Slatter
INTEC College Principal

go to: www.intec.edu.za or email: info@intec.edu.za
Call a Student Consultant:
HEAD OFFICE
JOHANNESBURG
PRETORIA
BENONI
WITBANK
NELSPRUIT
ERMELO
CAPE TOWN
PORT ELIZABETH
DURBAN
PHOENIX
PIETERMARITZBURG
VRYHEID
ESTCOURT
POLOKWANE
PHUTHADITJHABA
BLOEMFONTEIN
WELKOM
WINDHOEK
NATIONAL CALL CENTRE

Tel: (+27) 21 417 6700
Tel: (+27) 11 712 2555
Tel: (+27) 12 352 9000
Tel: (+27) 11 749 2001
Tel: (+27) 13 692 5400
Tel: (+27) 13 752 2427
Tel: (+27) 17 811 2102
Tel: (+27) 21 426 0626
Tel: (+27) 41 585 0777
Tel: (+27) 31 374 9700
OPENING SOON
Tel: (+27) 33 345 1665
Tel: (+27) 34 980 9603
Tel: (+27) 36 352 5083
Tel: (+27) 15 291 4384
Tel: (+27) 58 713 1336
Tel: (+27) 51 430 8030
Tel: (+27) 57 352 8599
Tel: (+264) 61 308 834
Tel: 0800 012 311

INTEC College (PTY) LTD FET 00037 PA is a member of both the
National Association of Distance Education Organisations in South
Africa (NADEOSA) and the Association of Private Providers of
Education, Training and Development (APPETD).
INTEC is a Registered Credit Provider: NCRCP 2325
15008A

Fax: (+27) 21 419 6721
Fax: (+27) 11 712 2521
Fax: (+27) 12 322 6369
Fax: (+27) 86 609 2284
Fax: (+27) 86 557 3505
Fax: (+27) 13 752 6184
Fax: (+27) 17 811 2105
Fax: (+27) 21 426 0771
Fax: (+27) 86 262 1089
Fax: (+27) 31 301 8184
Fax: (+27) 33 345 1055
Fax: (+27) 34 980 8917
Fax: (+27) 36 352 5867
Fax: (+27) 15 291 1956
Fax: (+27) 58 713 1352
Fax: (+27) 86 541 4614
Fax: (+264) 61 308 691
Fax: 0860 103 242

12-13

(E & OE)

Build your future the INTEC way

Contents
Draughting Endorsement
Why Should Students Join the SA Institute of
Draughting?
South African Council for the Architectural
Profession (SACAP)
INTEC Introduction to Draughting Certificate
Certificate General Draughting
Further Education and Training Certificate:
Draughting
INTEC Architectural Draughting Professional Certificate
Diploma: Architectural Draughting
INTEC Mechanical Draughting Certificate
Diploma: Mechanical Draughting
Diploma: Pipe Draughting
Autodesk AutoCAD® 2014
Certificate: Autocad
Autodesk® Revit® Architecture 2014
Autodesk® Inventor® 2014
SHORT COURSES IN DRAUGHTING
• INTEC Architectural Draughting
Short Course Certificate
• INTEC Mechanical Draughting
Short Course Certificate
• INTEC Piping Draughting
Short Course Certificate
• INTEC Structural Steel Detailing Draughting
Short Course Certificate
• INTEC Reinforced Concrete Detailing Short
Course Certificate

1
2
3
4
6
7
8
10
12

Agent
Programme

15
16
19
20
24

28
29
30
31
32

National Qualifications are credit-bearing qualifications registered on the NQF

(National Qualifications Framework) and accredited by a Quality Assurance Body,
such as a SETA (Sector Education and Training Authority). A skills programme is an
accredited component of a national qualification.

Agent Programmes are programmes for which INTEC offers tuition, but where

INTEC does not issue the final certificate. The Agent body issues the final certificate
and manages the final examinations.

INTEC
Programme

INTEC Programmes are INTEC’s own programmes that are not linked to the NQF

Career
Programme

• INTEC Career Programmes are INTEC’s own programmes that are designed to
teach you the skills and knowledge to succeed in a particular career.

Career
Booster

• INTEC Career Booster courses are continuous professional development (CPD)
short courses that help you add to your current professional knowledge in a
particular field, and hence boost your abilities within your career.

Career
Star ter
Job
Creator
Self
Enrichment

and are not credit-bearing. However, they are in high demand and carry the approval
of the INTEC Academic Board. INTEC Programmes fall into FIVE categories:

• INTEC Career Starter courses are short courses that introduce
you to a particular field or career; and that offer you the opportunity
to explore an interest or a skills set without having to enrol on a full
programme.
• INTEC Job Creator courses are designed to refine your skills in
a particular field of interest; to teach you how to make a living from
a particular skill, interest or hobby, and to help you start your own
business.
• INTEC Self-Enrichment courses are offered for self-enrichment
purposes. They will add value to your experience of life in a
particular chosen field of interest.

INTEC College offers you Draughting
training that is approved by the South
African Institute of Draughting (SAID)
and is fully endorsed by the International
Academy of Draughting − recognised leaders
in the Draughting field.
INTEC College has enhanced and adapted the learning material to
suit distance learning.

Programme Types offered at INTEC College

NQF

Draughting
Endorsement

What is the South African Institute of Draughting (SAID)?
The SAID is a professional body that was established in 1953,
with the objective of improving the academic and technical
qualifications of draughtspersons.

Why register with INTEC and the SAID?
Registering with INTEC and a recognised body such as the SAID
will assist you in today’s extremely competitive employment
market. More and more employers are giving preference to
members of the SAID. Members of the public may also contact
the SAID to check registration of draughtspersons. This has
become even more important for draughtspersons with the new
statutory requirements of the Engineering Council of SA (ECSA)
and the SA Council of the Architectural Profession (SACAP).

SABS Code of Practice
SABS Code of Drawing Practice
SABS Code of Practice is the standard for draughtspersons
in South Africa, based on international drawing standards.
Adherence to these standards will ensure that you’ll be able
to effectively communicate to any other person within the
draughting and construction fields.

Why Should Students
Join the SA Institute
of Draughting?
• SAID is a professional, multi-disciplinary institute
representing all disciplines of draughting.
• SAID is the only institute in South Africa that is
recognised by both the architectural and engineering
statutory bodies, which control all aspects of the
architectural and engineering professions.
• SAID is recognised as a Voluntary Association by the SA
Council for the Architectural Profession (SACAP).
• SAID is also recognised as a Voluntary Association by the
Engineering Council of SA (ECSA).
• SAID is the only Institute for the registration of all
disciplines of engineering draughtspersons.
• SAID membership has become a requirement by some
companies as a criterion for employment.
• SAID registers employees from some of South Africa’s
largest multi-national consulting engineering companies
and also the utility provider ESKOM.
• SAID has members who are employed worldwide — in
Australia, New Zealand, England, Ireland, France, Germany,
Namibia, Zambia, Botswana, Mozambique, Zimbabwe and
Angola.
• Registering as a Student Member is the easiest way of
obtaining membership of the institute.
• Recognition of your SAID membership is not only valuable
now, but will assist in your future career advancement.

South African Council for
the Architectural Profession
(SACAP)
On completion of their studies, students undertaking an
architectural career are required to complete a minimum of
two years’ supervised architectural draughting experience,
prior to applying to SACAP for registration as a Candidate
Architectural Draughtsperson (CAD).
Once registered, candidates are required to work under
the direct supervision of a professionally registered person
(Mentor) for three years, in accordance with the
SACAP Practical Training and Examination Policy.
During the three years of Mentorship, candidates are
required to follow a curriculum, as set out by SACAP, and to
build up a portfolio of evidence, documenting the work and
activities that they have undertaken during this three-year
period. Monthly Training Records, as specified in the SACAP
Practical Training and Examination Policy documentation,
must be completed and submitted to SACAP on a monthly
basis.
The SACAP Practical Training and Examination Policy
document, outlining the curriculum and documents required
for record keeping purposes, is downloadable
from the registration section of the SACAP website
www.sacapsa.com.
After 18 months of practical training, and after obtaining
a minimum of 50% of the value units required, candidates
may apply to SACAP to write the Professional Practice
Examination (PPE). However, Candidates must complete
the balance of the Practical Training period of 36 months,
and obtain the balance of the value units required, before
the Candidate applies to be upgraded to Professional
Architectural Draughtsperson (PAD).
Note: Submission of drawings to local authorities, for approval,
may only be carried out by SACAP Registered Professionals.

INTEC Introduction to
Draughting Certificate

Career
Star ter

Enter the world of Draughting and be introduced to
the fundamentals, your draughting tools, and various
draughting disciplines such as Architectural, Mechanical
and Electrical draughting.

Assessment

Programme Type

On successful completion of this course, you will receive your
INTEC Introduction to Draughting Certificate.

The INTEC Introduction to Draughting Certificate is part of
the INTEC Career Starter series. The INTEC Introduction to
Draughting Certificate is an INTEC certificate. This Programme is
approved by the INTEC College Academic Board.*

You are required to complete and submit your assignments to the
college for marking. All assignments must be successfully passed
in order to obtain the award.

Award

FREE SABS Codes

The SABS codes that you will require are included with your course
material.

Entrance Requirements

Grade 10 (Std. 8) or equivalent, or relevant work experience
(2 years).

Course Duration
You should be able to complete this course within 12 months.

Course Content
This course consists of the following topics:

•
•
•
•
•
•
•
•
•

Using Drawing Instruments

Your kit items
• At an additional special fee,
you can add a set of highquality, precision draughting
instruments in an INTEC
portfolio bag to your
course.*

Lines and Lettering
Geometric Terms and Construction

*INTEC College reserves the right to change
the kit items without prior notice.

Basic Engineering Draughting
Projections and Auxiliary Views
Architectural and Electrical Draughting
Pipe Draughting
Reinforced Concrete
Hydraulics

* This programme does not lead to a qualification on the NQF.

Certificate:
General Draughting

NQF
Qualification: CertGenDrau (INTEC) NQF 3
SAQA ID: 21152
NQF Level 3
Credits: 120

Further Education and
Training Certificate:
NQF
Draughting
Qualification: FETCCertDrght (INTEC) NQF 4
SAQA ID: 71589
NQF Level 4
Credits: 136

This entry-level qualification will empower you with the
skills and competencies required to accurately copy a
given drawing to scale, trace given drawings, interpret
drawings and use and apply geometric constructions in
the operational draughting environment. Draughting
skills can be applied in the fields of architecture, civil and
mechanical engineering and construction, to name but
a few. The programme will also enable access to further
studies in this field.

The Further Education and Training Certificate: Draughting
equips you with an understanding of the fundamentals of
draughting. The skills and competencies resultant from
this programme will support the ability to handle accurate
architectural drawings, mechanical drawings, and pipe
drawings, as well as isometric drawings. Students will be
taught to use scales and to read and interpret drawings
within the field of draughting. This programme enables
access into further studies in this field.

Entrance Requirements

Grade 10 (Standard 8) or equivalent, or verifiable and relevant
working experience (2 years) preferably in a technical environment.

Course Duration

You should be able to complete this course within 18 months.

Certification

On successful completion of this course, you will receive a
Certificate: General Draughting.

Career Opportunities

This qualification will enable you to pursue a career in:
• Architectural Draughting
• Mechanical Draughting
• Pipe Draughting

Grade 11 (Standard 9) with Engineering/Technical Drawing, or
National Certificate Vocational L2 Engineering qualification or
verifiable and relevant working experience (2 years) preferably in a
technical environment.

Course Duration

You should be able to complete this course within 18 months.

Certification

On successful completion of this course, you will receive a Further
Education and Training Certificate: Draughting.

Career Opportunities

This qualification will enable you to pursue a career in:
•
•
•
•

Architectural Draughting
Piping Draughting
Mechanical Draughting
Autodesk Inventor Draughting

INTEC Architectural Draughting
Professional Certificate
Career
Programme

Please note your exam fees are not
included in your tuition fee.

Apply the knowledge of producing accurate plans and
drawings to scale once you have successfully completed
this course. This knowledge can be applied to your building
construction work, using drawings to turn concepts into
reality. This course teaches you to produce a sketch plan
to a client’s requirements, a presentation drawing, working
drawings, schedules and specifications for a single-storey
domestic building, and work satisfactorily under an
architect’s supervision.

Award

On successful completion of this course, you will
receive your INTEC Architectural Draughting Professional
Certificate.

FREE SABS Codes

The SABS codes that you will require are included with your
course material.

Programme Type

The INTEC Architectural Draughting Professional Certificate is an
INTEC Career Programme. This Programme is approved by the
INTEC College Academic Board.*

Entrance Requirements

Grade 11 (Std. 9) with Technical Drawing N2 or equivalent, or
INTEC Introduction to Draughting Certificate, or relevant work
experience (2 years).

Your kit items
• At an additional special
fee, you can add a set
of high-quality, precision
draughting instruments in
an INTEC portfolio bag
to your course.*

Course Duration

You should be able to complete this course within 24 months.

Course Content

• Instruments
• Freehand Technical Sketching
• Plans, Sections and Elevations
• The Site Plan and Survey
• Sketch Plan Elevations
• Working Drawings: Plan, Sections and Elevations
• Structural and Masonry Details
• Roof Structure
• Electrical Layout
• Concrete Structures
• Three-dimensional Drawings
• Presentation Techniques
• Professional Procedure and Practice

Assessment and Exam Information

All assignments are optional, but you are required to write and
pass five formal examinations. Please note that examinations are
written in June and October of each year. You should complete
an exam entry form and submit it to the college, together with
the prescribed examination fee, before the closing date of the
next examination.
* This programme does not lead to a qualification on the NQF.

AutoCAD 2014
• OPTIONAL:
Add on the AutoCAD course
at an additional special fee.

REVIT 2014
• OPTIONAL:
Add on the Revit Architecture course
at an additional special fee.

*INTEC College reserves the right to change the
kit items without prior notice.

Diploma:
Architectural Draughting

NQF

Qualification: DipArcDrau (INTEC) NQF 6
SAQA ID: 21153
NQF Level 6
Credits: 240

The Diploma: Architectural Draughting will provide
you with a broad knowledge and understanding of
the use of drawing instruments and equipment, use
of scale, reading, interpretation and drawing of site
plans, sections, elevations and working drawings. In
addition, you will gain the skills and competencies to
use and apply geometric and construction principles
relevant to architectural requirements and the drawing
up of complete presentation drawings for submission
to local authorities.
Entrance Requirements

Grade 12 (Standard 10), N3, or an INTEC General Draughting
Certificate or equivalent, or verifiable and relevant working
experience (3 years) preferably in a technical environment.

Course Duration

You should be able to complete this course within 24 months.

Certification

On successful completion of this course, you will receive a
Diploma: Architectural Draughting.

Career Opportunities

This qualification will enable you to pursue a career in:
• Architectural Draughting
• Autodesk Inventor Draughting
• Civil Draughting

INTEC Mechanical
Draughting Certificate

Career
Programme

Learn to focus on drawings that contain comprehensive
information, from dimensions, tolerances, surface
finishes, materials, and heat treatments to
manufacturing methods. This course helps you
understand the purpose of engineering drawings, the
line-work and symbols used in these drawings, and will
teach you to construct a vector diagram.
Programme Type

The INTEC Mechanical Draughting Certificate is an INTEC
Career Programme. This Programme is approved by the
INTEC College Academic Board.*

Entrance Requirements
Grade 11 (Std. 9) with Technical Drawing N2 or equivalent, or
relevant work experience (2 years).

Course Duration
You should be able to complete this course within 18 months.

Course Content
•
•
•
•
•
•
•
•

Introduction to Mechanical Draughting
Geometric Terms
Machine Drawing and Design
Principles of Mechanics
Platework
Welding
Mechanical Devices
Mechanical Handling

Assessment and Exam Information

All assignments are optional, but you are required to
write and pass four formal examinations. Please note that
examinations are written in June and October of each year.
You should complete an exam entry form and submit it to
the college, together with the prescribed examination fee,
before the closing date of the next examination.

Award
After you successfully complete the
course, you will receive your INTEC
Mechanical Draughting Certificate.

FREE SABS Codes

The SABS codes that you will require is included
with your course material.

Your kit items
• A
t an additional special
fee, you can add a set
of high-quality, precision
draughting instruments in
an INTEC portfolio bag
to your course.*

*INTEC College reserves the right to change the kit items without prior notice.

AutoCAD 2014
• OPTIONAL:
Add on the AutoCAD course
at an additional special fee.

Inventor 2014
• OPTIONAL:
Add on the Inventor course
at an additional special fee.

Please take note that your examination fee is not
included in your tuition fee.
* This programme does not lead to a qualification on the NQF.

*INTEC College reserves the right to
change the kit items without prior notice.

Diploma:
Mechanical Draughting

NQF

Qualification: DipMecDrau (INTEC) NQF 6
SAQA ID: 21157
NQF Level 6
Credits: 240

Diploma:
Pipe Draughting

NQF

Qualification: DipPipeDraught (INTEC) NQF 5
SAQA ID: 21158
NQF Level 5
Credits: 240

This programme enables a solid understanding of
the use of drawing instruments, equipment and
principles in order to draw machine components,
mechanical devices, handling equipment, gears,
hydraulic presses and turntables to scale. In addition,
skills and competencies covered include the ability
to calculate the strength of materials and conduct
other calculations relevant to mechanical and machine
component planning and design. The programme
will thus prepare you for draughting within a range of
fields by means of the use of computer-aided design.

This programme is designed to enable the application
of draughting principles to create geometric
constructions, use third angle orthographic projection
and draw pipes, fitments and more. Additional skills
and competencies include detailing of piping, the
drawing of expansion joints and the use of different
calculations relevant to strengths of supports, pipe
fitment supports and the detailing and design of small
pipelines. The ability to use automation and select
tundishes, launders and channels further support to
the relevant skill sets related to the programme.

Entrance Requirements

Course Duration

Certification

Career Opportunities

•
•
•
•

•
•
•
•
•
•

Grade 12 (Standard 10), N3, or the Certificate: General
Draughting with INTEC, or verifiable and relevant working
experience (3 years) preferably in a technical environment.

You should be able to complete this course within 24 months.

On successful completion of this course, you will receive a
Diploma: Mechanical Draughting.

This qualification will enable you to pursue a career in/as a:

CAD Operator
Autodesk Inventor Draughting
Civil and Architectural Draughting
Mechanical Draughting

Grade 12 (Standard 10), N3, or an INTEC General Draughting
Certificate, or verifiable and relevant working experience (3
years) preferably in a technical environment.

You should be able to complete this course within 24 months.

On successful completion of this course, you will receive a
Diploma: Pipe Draughting.

This qualification will enable you to pursue a career in/as a:
Pipeline Project Manager
Piping Draughting
CAD Operator Draughting
Pipe Designer
Senior Pipe Designer
Civil Draughting

Autodesk
AutoCAD® 2014

Agent
Programme

Design and shape the world around you with the powerful,

flexible features found in AutoCAD® 2014 software, one of
the world’s leading 2D and 3D CAD design tools. Maximise
productivity by using powerful tools for design aggregation
and documentation, connecting and streamlining your design
and documentation workflows. AutoCAD will give you an
understanding of the art of technical design and the effect of
manipulation of technical drawings. It offers innovations that
increase design and documentation efficiency enabling you
to share those designs with colleagues in a more securely,
accurate and seamless way.
Programme Type
Autodesk AutoCAD® 2014 is an Agent Programme.

Autodesk
AutoCAD® 2014

Cont.

For 32-Bit AutoCAD® 2014
• Windows® 8 Standard, Enterprise, or Professional edition,
Windows® 7 Enterprise, Ultimate,
Professional, or Home Premium edition (compare Windows versions), or
Windows XP® Professional or Home edition (SP3 or later) operating system
• For Windows 8 and Windows 7: Intel® Pentium® 4 or AMD Athlon™
dual-core processor, 3.0 GHz or higher with SSE2 technology
• For Windows XP: Pentium 4 or Athlon dual-core processor, 1.6 GHz or higher
with SSE2 technology
• 2 GB RAM (4 GB recommended)
• 6 GB free disk space for installation
• 1024x768 display resolution with true colour (1600x1,050 recommended)
• Microsoft® Internet Explorer® 7 or later web browser
• Install from download or DVD

AutoCAD 2014 System Requirements
For 64-Bit AutoCAD® 2014
• Windows 8 Standard, Enterprise, or Professional edition, Windows 7 Enterprise,
Ultimate, Professional, or Home Premium edition (compare Windows versions), or
Windows XP Professional (SP2 or later)
• Athlon 64 with SSE2 technology, AMD Opteron™ processor with SSE2 technology,
Intel® Xeon® processor with Intel EM64T support and SSE2 technology, or Pentium
4 with Intel EM64T support and SSE2 technology
• 2 GB RAM (4 GB recommended)
• 6 GB free space for installation
• 1,024 x 768 display resolution with true color (1,600 x 1,050 recommended)
• Internet Explorer 7 or later
• Install from download or DVD
Additional requirements for large datasets, point clouds, and 3D modeling
(all configurations)
• Pentium 4 or Athlon processor, 3 GHz or greater, or Intel or AMD dual-core
processor,
2 GHz or greater
• 4 GB RAM or more
• 6 GB hard-disk space available in addition to free space required for installation
• 1,280 x 1,024 true colour video display adapter 128 MB or greater, Pixel Shader 3.0
or greater, Microsoft® Direct3D®-capable workstation-class graphics card

Entrance Requirements

Grade 11 (Std.9) with Technical Drawing or N2 with
Engineering Drawing, or relevant work experience (2 years).

Course Duration

You should be able to complete this course within 18 months.

Course Content
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Getting Started
Basic Drawing Skills
Using Drawing Aids
Editing Entities
Shaping Curves Controlling Object Visibility and
Appearance
Organizing Objects
Hatching and Gradients
Working with Blocks and Xrefs
Creating and Editing Text
Dimensioning
Keeping In Control with Constraints
Working with Layouts and Annotative Objects
Printing and Plotting
Working with Data
Navigating 3D Models
Modeling in 3D
Presenting and Documenting 3D Design

Autodesk
AutoCAD® 2014

Cont.

Assessment and Award

On successful completion of your INTEC assignments, you will
receive a progress report. Once you have acquired the practical
experience on the software package (recommended 50 hours)
and successfully passed your assignments, you will be able to
enrol for the Internationally-accredited Autodesk exam. The
recommended hours before attempting the exam is 400 hours
of practical hands-on application.
Please log onto http://www.autodesk.co.za to register for the
exam. Please note: your exam fees are not included in your
tuition fee.
Upon successful completion of your exam, you will receive your
International certification from Autodesk.

Autodesk AutoCAD 2014 Textbook

Certificate:
AutoCAD NQF
Qualification: CertAutoCAD (INTEC) NQF 4
SAQA ID: 21149
NQF Level 4
Credits: 120

AutoCAD Drafters are design professionals who use
computer-aided design (CAD) software for drafting
technical drawings used in the production and
construction of complex objects and structures. The
technical drawings that AutoCAD drafters create are
used in architecture, engineering, aerospace and
just about any discipline where something is being
designed and built. The programme provides you
with the relevant skills and competencies to apply
drawing instructions and use CAD-specific editing
and commands used for dimensioning as well as the
handling of mechanical and construction-related
drawings.

Autodesk AutoCAD 2014 textbook

Entrance Requirements

Grade 10 (Standard 8), N1 or equivalent, or relevant working
experience (2 years) preferably in a technical environment.
*INTEC College reserves the right
to change the kit items without prior notice.

Your kit items
• Laptop bag
• External drive
• Wacom
• AutoCAD® 2014
textbook
• AutoCAD® 2014
Software

*INTEC College reserves
the right to change the
kit items without prior
notice.

Course Duration

You should be able to complete this course within 18 months.

Certification

On successful completion of this course, you will receive a
Certificate: AutoCAD.

Career Opportunities

This qualification will enable you to pursue a career in:
• Architectural Draughting
• Civil Draughting
• Mechanical Draughting

Autodesk® Revit®
Architecture 2014

Agent
Programme

Autodesk® Revit® Architecture building
design software works the way architects and
designers think, so you can develop higher-quality,
more accurate architectural designs. Built for Building
Information Modelling (BIM), Autodesk Revit Architecture helps
you capture and analyse concepts and maintain your vision
through design, documentation, and construction. Make more
informed decisions with information-rich models to support
sustainable design, construction planning, and fabrication. This
programme is specifically developed for Building Information
Modelling (BIM), helping building professionals to design, build
and maintain higher-quality, more energy-efficient buildings.

Autodesk® Revit®
Architecture 2014 Cont.

Programme Type

• 8 GB RAM (Usually sufficient for a typical editing session
for a single model up to approximately 300 MB on disk.
This estimate is based on internal testing and customer reports.
Individual models will vary in their use of computer resources and
performance characteristics).
• Models created in previous versions of Revit software products may require more
available memory for the one-time upgrade process
• 5 GB free disk space
• 1,680 x 1,050 monitor with true colour
• DirectX 11 capable graphics card with Shader Model 3 as recommended by
Autodesk
• Internet Explorer 7 (or later)
• MS-Mouse or 3Dconnexion-compliant device
• Download or installation from DVD9 or USB key
• Internet connectivity for license registration and prerequisite component download

Autodesk® Revit® Architecture 2014 is an Agent Programme.

Performance: Large, complex models

Autodesk Revit 2014 Product System Requirements
For Autodesk® Revit® 2014, Autodesk® Revit® Architecture
2014, Autodesk® Revit® MEP 2014, and Autodesk® Revit®
Structure 2014
Minimum entry-level configuration
• Windows® 7 32-bit Enterprise, Ultimate, Professional, or Home Premium edition
operating system
• Single- or multi-core Intel® Pentium®, Intel® Xeon®, or i-Series processor or
AMD equivalent with SSE2 technology (highest affordable CPU speed rating
recommended)
• Multiple cores for many tasks, up to 16 cores for near-photorealistic rendering
operations
• 4 GB RAM (Usually sufficient for a typical editing session for a single model up
to approximately 100 MB on disk. This estimate is based on internal testing and
customer reports. Individual models will vary in their use of computer resources and
performance characteristics.)
• Models created in previous versions of Revit products may require more available
memory for the one-time upgrade process
• /3GB RAM switch not recommended. Revit software and system stability can be
affected by memory conflicts with video drivers when the /3GB switch is active.
• 5 GB free disk space
• 1280x1024 monitor with true colour
• Display adapter capable of 24-bit colour for basic graphics, 256 MB DirectX®
11-capable graphics card with Shader Model 3 as recommended by Autodesk
• Microsoft® Internet Explorer® 7 (or later)
• MS-Mouse or 3Dconnexion®-compliant device
• Download or installation from DVD9 or USB key
• Internet connectivity for license registration and prerequisite component download

Value: Balanced performance
• Windows® 8 64-bit Enterprise or Professional edition, or Windows 7 64-bit
Enterprise, Ultimate, Professional, or Home Premium edition operating system
• Multicore Xeon or i-Series processor or AMD equivalent with SSE2 technology
(highest affordable CPU speed rating recommended)
• Multiple cores for many tasks, up to 16 cores for near-photorealistic rendering
operations

• Windows 8 64-bit Enterprise or Professional edition, or Windows 7 64-bit Enterprise,
Ultimate, Professional, or Home Premium edition
• Multicore Xeon or i-Series processor or AMD equivalent with SSE2 technology
(highest affordable CPU speed rating recommended)
• Multiple cores for many tasks, up to 16 cores for near-photorealistic rendering
operations
• 16 GB RAM (Usually sufficient for a typical editing session for a single model up
to approximately 700 MB on disk. This estimate is based on internal testing and
customer reports. Individual models will vary in their use of computer resources and
performance characteristics)
• Models created in previous versions of Revit software products may require more
available memory for the one-time upgrade process
• 5 GB free disk space; 10,000+ RPM for Point Cloud interactions
• 1920x1200 monitor with true colour
• DirectX 10 capable graphics card with Shader Model 3 as recommended by
Autodesk
• Internet Explorer 7 (or later)
• MS-Mouse or 3Dconnexion-compliant device
• Download or installation from DVD9 or USB key
• Internet connectivity for license registration and prerequisite component download

For Autodesk Revit Server 2014, less than 75 concurrent users
• Microsoft® Windows® Server 2012 64-bit, Microsoft® Windows® Server 2008 R2
64-bit, or Microsoft® Windows® Server 2008 64-bit
• Processor with 4 or more cores and at least 2.6 GHz (6 or more cores and 3 GHz for
maximum performance)
• Microsoft® Internet Information Server 7 (or later)
• 4 GB RAM (8 GB RAM for value performance, 16 GB for maximum performance)
• 7,200 or more RPM hard drive with 6Gbps link (10,000+ RPM recommended for value
performance, 15,000 or more RPM for maximum performance)

For Autodesk Revit Server 2014, 75 or more concurrent users
• Windows Server 2012 64-bit, Windows Server 2008 R2 64-bit, or Windows Server
2008 64-bit
• Processor with 6 or more cores and at least 2.6 GHz (8 or more cores and at least 2.6
GHz for value performance, 12 or more cores and 3 GHz for maximum performance)
• Internet Information Server 7 (or later)

Autodesk® Revit®
Architecture 2014 Cont.

• 8 GB RAM (16 GB RAM for value performance, 32 GB RAM for

maximum performance)

• 15,000 or more RPM hard drive (high-speed RAID array of more than
15,000 RPM drives for maximum performance)

Autodesk® Revit®
Architecture 2014 Cont.
•
•
•
•

Details and Annotations
Creating Drawing Sets
Workflow and Site Modeling
Repeating Objects, Best Practices, and Quick Tips

• VMware® Support
• Microsoft® Hyper-V® Support (See Revit Server Administrator’s Guide)

Revit Architecture for Citrix[2] 2014
• Windows 8 64-bit, Windows 7 32- and 64-bit
• Citrix system with XenApp® 6.0 or 6.5, Citrix® License Manager, and Citrix® Profile
Manager
• Microsoft® Active Directory with support for roaming profiles
• Dedicated Autodesk license server for session-specific licenses
• Microsoft Internet Explorer 7 (or later)
• Client computers should be bound to the network domain, and each client computer
should install either the full or web client plug-in
• Users should use their domain logins to access both the Citrix web console and the LAN
________________________________________
1. Learn more about using Revit Architecture 2014, Revit MEP 2014, Revit Structure 2014,
and Revit 2014 software with Boot Camp®, part of Mac OS® X that enables you to
install and run Windows (and Windows-based applications) on a Mac® computer or with
Parallels Desktop®, a system utility available from Parallels, Inc. that enables you to run
applications in each operating system without restarting your computer.
2. Revit Architecture 2014, Revit MEP 2014, and Revit Structure 2014 software products
are Citrix Ready™ Applications. Disclaimer: The Citrix application is network-based and
performance of Autodesk Citrix Ready Applications may vary with network performance.
These Revit software products do not include the Citrix application, nor does Autodesk
provide direct support for issues with the Citrix application. Users should contact Citrix
directly with questions related to procurement and operation of the Citrix application.

Entrance Requirements

Grade 12 (Std. 10) with Technical Drawing and PC literacy
using a Windows Operating System or equivalent, or relevant
work experience (2 years).

Assessment and Award

On successful completion of your INTEC assignments, you will
receive a progress report. Once you have acquired the practical
experience on the software package (recommended 50 hours) and
successfully passed your assignments, you will be able to enrol for
the internationally-accredited Autodesk exam. The recommended
hours before attempting the exam is 50 hours of practical handson application.
Please log onto http://www.autodesk.co.za to register for the
exam.
Please note: your exam fees are not included in your tuition
fee.
Upon successful completion of your exam, you will receive your
International certification from Autodesk.

Your kit items
• Laptop bag
• Wireless mouse
• External drive
• Wacom
• Revit® Architecture
2014 textbook
• Revit® Architecture
2014 Software

Course Duration
You should be able to complete this course within 18 months.

Table of Contents
•
•
•
•
•
•
•
•
•
•

Introducing the Autodesk Revit Architecture Interface
Walls and Curtain Walls
Floors, Roofs, and Ceilings
Stairs, Ramps, and Railings
Adding Families
Modifying Families
Schematic Design
Rooms and Color-Fill Plans
Materials, Rendering, and Visualisation
Worksharing

*INTEC College reserves the right to change the kit items without prior notice.

Autodesk Revit Architecture
2014 Textbook

*INTEC College
reserves the right
to change the kit
items without prior
notice.

Autodesk®
Inventor® 2014

Agent
Programme

Autodesk® Inventor® 3D CAD software

products offer a comprehensive, flexible

set of software for 3D mechanical design, product
simulation, tooling creation, and design communication.
Inventor takes you beyond 3D to Digital Prototyping by
enabling you to produce an accurate 3D model that can
help you design, visualise, and simulate your products
before they are built.
Digital Prototyping with Inventor helps companies design
better products, reduce development costs, and get to
market faster.

• Internet connection for web
downloads and Subscription Aware access
• Microsoft-compliant mouse or pointing device
• DVD-ROM drive

For complex models, complex mold assemblies, and
large assemblies (typically more than 1,000 Parts):
•
•
•
•
•
•
•
•

Programme Type

Autodesk® Inventor® 2014 is an Agent Programme.

•
•

Autodesk® Inventor® system requirements

•
•

System requirements for Autodesk Inventor 2014 products
For Inventor 2014 Windows users

For general part and assembly design (typically fewer
than 1,000 parts):

• Windows® 7 (32-bit minimum, 64-bit recommended) or
Windows® 8 64-bit operating system
• Intel® Pentium® 4, AMD Athlon™ 64 with SSE2 technology,
3 GHz or greater, or AMD dual-core processor with SSE2, 2
GHz or greater recommended, or Intel® Xeon® E3 or Core i7
or equivalent with SSE2, 3.0 GHz or greater
• 4 GB RAM minimum for less than 500 part assemblies (8 GB
recommended)
• 15 GB free disk space for installation
• 1,280 x 1,024 or higher screen resolution
• Microsoft® Direct3D 9® or compatible graphics card (Micro
soft® Direct3D 11® or higher recommended)
• Microsoft® Internet Explorer® 6 or later (.NET Framework
Version 4.5 web browser)
• Microsoft® Excel® 2003 or later software for iFeatures, iParts,
iAssemblies, thread customization, and spreadsheet-driven
designs
• Adobe® Flash® Player 10

Cont.

64-bit Windows 7 or Windows 8
Xeon E3 or Core i7 or equivalent, 3.3 GHz or greater
16 GB RAM or greater
15 GB free disk space for installation
1280x1024 or higher screen resolution
Direct3D 9 or compatible graphics card (Direct3D 11 or
higher recommended)
Internet Explorer 6 or later (.NET Framework Version 4.5
web browser)
Excel 2003 or later for iFeatures, iParts, iAssemblies, thread
customisation, and spreadsheet-driven designs
Flash Player 10
Internet connection for web downloads and Subscription
Aware access
Microsoft-compliant mouse or pointing device
DVD-ROM drive

For Inventor 2014 Mac® users
On Boot Camp®:

You can install Autodesk Inventor Professional software on a
Mac computer on a Windows partition. The system must use
Apple Boot Camp to manage a dual OS configuration and
meet the minimum system requirements.
•
•
•
•

Mac OS® X 10.6 (10.8 or higher recommended)
Boot Camp v2.0 or higher
Windows 7 64-bit
Intel® Core 2® Duo or greater processor with SSE2
technology, 3.0 GHz or greater
• 8 GB RAM or greater
• 64 GB free disk space on Windows OS partition (250 GB
recommended)

Mac Virtualisation on Parallels Desktop:
•
•
•
•

Mac OS X 10.6 (10.8 or higher recommended)
Parallels Desktop 8.0 or higher
64-bit Windows 7 or Windows 8
Core 2 Duo or greater with SSE2 technology, 3.0 GHz or
greater
• 8 GB RAM (16 GB recommended)
• 500 GB free disk space or greater

Autodesk® Inventor®
2014 Cont.
Agent
Programme

1. Autodesk Inventor 2014 software is
provided both as 32-bit application and as

64-bit application for installation and use on
the corresponding operating system only. Windows XP
Professional 32-bit is not recommended for Inventor. English
versions of Inventor will run on any language operating system.
Other language versions of these applications will run on
operating systems of that same language. Inventor and
Autodesk® Vault® software must both be the same language
on a given computer.
2. Autodesk recommends settings which allow Windows to manage virtual memory as needed. There should always be at least
twice as much free hard disk space as system memory (RAM).
Recommended minimum RAM for using Inventor Tooling is 3 GB.
3. Inventor 2014 is available only on DVD media (or electronic
download in some situations). A DVD-ROM drive is not required if
installing via electronic download.

Entrance Requirements

Grade 12 (Std. 10) with Technical Drawing and PC literacy using
a Windows Operating System or equivalent, or relevant work
experience (2 years).

Course Duration

You should be able to complete this course within 18 months.

Autodesk®Inventor®
2014 Cont.
Agent
Programme

Assessment and Award

On successful completion of your
INTEC assignments, you will receive a
progress report. Once you have acquired the
practical experience on the software package (recommended
50 hours) and successfully passed your assignments, you will
be able to enrol for the Internationally-accredited Autodesk
exam. The recommended hours before attempting the exam
is 50 hours of practical hands-on application.
Please log onto http://www.autodesk.co.za to register for the
exam. Please note: your exam fees are not included in your
tuition fee.
Upon successful completion of your exam, you will receive
your International certification from Autodesk.

Your kit items
• Laptop bag
• Wireless mouse
• External drive
• Wacom
• Inventor®
2014 textbook
• Inventor®
2014 Software

Course Content
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Connecting to the Interface
Introducing Parametric Sketching
Introducing Part Modeling
Creating 2D Drawings f rom 3D Data
Introducing Assembly Modeling
Exploring Part Modeling
Advanced Part Modeling
Creating Advanced Drawings and Annotations
Advanced Assembly and Engineering Tools
Creating Sculpted and Multibody Parts
Working with Sheet Metal Parts
Building with the Frame Generator
Working in a Weldment Environment
Appendix Autodesk Inventor Certification

*INTEC College reserves the right to change the kit items without prior notice.

Inventor 2014 Textbook

*INTEC College
reserves the right to
change the kit items
without prior notice.

Short courses in Draughting

The INTEC short courses in Draughting provide a
broad base of knowledge in draughting, and the skills
needed for entry into the draughting industry.

INTEC Architectural
Draughting Short Course
Certificate

Career
Star ter

The INTEC Architectural Draughting Short Course
Certificate enables you to read, interpret, and produce
working architectural drawings for the construction field.
You will understand the drawings and symbols used in
working architectural drawings, interpret those drawings,
use them to interpret the structure of a building, and
produce working architectural drawings.
Entrance Requirements
Grade 11 (Std. 9) with Mathematics or Technical Drawing or
equivalent, or relevant work experience (2 years).

Programme Type
The INTEC Architectural Draughting Short Course Certificate is
part of the INTEC Career Starter series. The INTEC Architectural
Draughting Short Course Certificate is an INTEC short course. This
Programme is approved by the INTEC College Academic Board.*

Course Duration

You should be able to complete this course within 12 months.

Course Outcomes
• Explain building practice in relation to architectural drawing.
• Read and interpret working architectural drawings.
• Use drawings to interpret the structure of a building.
• Produce working architectural drawings.
• Verify that information from drawings conforms to the
construction activities.
• Issue, use and store architectural drawings.
• Submit architectural drawings for approval to a local authority.

Assessment

You are required to complete and submit one assignment to the
college for marking. All assignments must be successfully passed in
order to obtain the award.

Award

INTEC Mechanical
Draughting Short
Course Certificate

Acquire the knowledge and skills needed to produce a
variety of mechanical drawings! The INTEC Mechanical
Draughting Short Course Certificate introduces you to the
production of working mechanical drawings.
Entrance Requirements

Grade 11 (Std. 9) with Mathematics or Technical Drawing or
equivalent, or relevant work experience (2 years).

Programme Type

The INTEC Mechanical Draughting Short Course Certificate is
part of the INTEC Career Starter series. The INTEC Mechanical
Draughting Short Course Certificate is an INTEC short course. This
Programme is approved by the INTEC College Academic Board.*

Course Duration

You should be able to complete this course within 12 months.

Course Outcomes
• Demonstrate an understanding of conventional representation
for mechanical draughting.
• Draw cam profiles.
• Produce sectional drawings.
• Produce detailed mechanical drawings.
• Produce an assembly drawing.

Assessment

You are required to complete and submit one assignment to the
college for marking. All assignments must be successfully passed
in order to obtain the award.

Award

On successful completion of this course, you will receive your
INTEC Mechanical Draughting Short Course Certificate.

On successful completion of this course, you will receive your INTEC
Architectural Draughting Short Course Certificate.
* This programme does not lead to a qualification on the NQF.

* This programme does not lead to a qualification on the NQF.

INTEC Piping
Draughting Short
Course Certificate

Career
Star ter

The INTEC Piping Draughting Short Course Certificate
introduces you to the production and understanding of
working piping drawings.
Entrance Requirements

Grade 11 (Std. 9) with Mathematics or Technical Drawing or
equivalent, or relevant work experience (2 years).

Programme Type

The INTEC Piping Draughting Short Course Certificate is
part of the INTEC Career Starter series. The INTEC Piping
Draughting Short Course Certificate is an INTEC short course.
This Programme is approved by the INTEC College Academic
Board.*

Course Duration

You should be able to complete this course within 12 months.

Course Outcomes

• Demonstrate an understanding of piping draughting.
• Identify and draw schematic drawings.
• Identify, describe and draw isometric layouts and
flow diagrams.

INTEC Structural Steel
Detailing Draughting
Short Course Certificate

Career
Star ter

Acquire the necessary knowledge of various
components of structural steel in order to produce
detailed drawings for fabrication purposes. These
structural steel components include beams, latticed
girders, columns, roof trusses, bracings and portal
frames. The details in the drawings include dimensions,
notes and other fabrication-related information.
Entrance Requirements

Grade 11 (Std. 9) with Mathematics or Technical Drawing or
equivalent, or relevant work experience (2 years) .

Programme Type

The INTEC Structural Steel Detailing Draughting Short Course
Certificate is part of the INTEC Career Starter series. The INTEC
Structural Steel Detailing Draughting Short Course Certificate
is an INTEC short course. This Programme is approved by the
INTEC College Academic Board.*

Course Duration

You should be able to complete this course within 12 months.

Course Outcomes

You are required to complete and submit one assignment to
the college for marking. All assignments must be successfully
passed in order to obtain the award.

• Demonstrate an understanding of structural steel detailing .
• Apply knowledge of beams, plates and box girders to produce
a workshop fabrication drawing.
• Identify and detail bolted and welded columns and welded
latticed girders.
• Identify and detail bolted welded roof trusses, detail bracings
and portal frames.
• Compile fabrication documentation.

Award

Assessment

On successful completion of this course, you will receive your
INTEC Piping Draughting Short Course Certificate.

You are required to complete and submit one assignment to the
college for marking. All assignments must be successfully passed
in order to obtain the award.

Award

On successful completion of this course, you will receive your
INTEC Structural Steel Detailing Draughting Short Course
Certificate.

* This programme does not lead to a qualification on the NQF.

Career
Star ter

DIPLOMA: PIPE
DRAUGHTING
(NQF5)

The INTEC Reinforced Concrete Detailing Draughting
Short Course Certificate is suitable for learners
entering the field of reinforced concrete detailing
draughting. It exposes learners to the basic commands
needed to draw a 2D object. Learn how to to draw and
manipulate basic single component 2D drawings
related to concrete reinforcing.

DIPLOMA:
MECHANICAL
DRAUGHTING
(NQF6)

Agent
Programme

DIPLOMA:
ARCHITECTURAL
DRAUGHTING
(NQF6)

INTEC Reinforced Concrete
Detailing Draughting
Short Course Certificate

Entrance Requirements

Award

On successful completion of this course, you will receive
your INTEC Reinforced Concrete Detailing Draughting Short
Course Certificate.
* This programme does not lead to a qualification on the NQF.

Grade 10 (Std. 8)

CERTIFICATE:
AUTOCAD (NQF 4)
Grade 10 (Std. 8)

CERTIFICATE: GENERAL
DRAUGHTING (NQF 3)

You are required to complete and submit one assignment to
the college for marking. All assignments must be successfully
passed in order to obtain the award.

Grade 11 (Std. 9) with Technical
Drawing N2 or equivalent,
or INTEC Introduction to
Draughting Certificate

Assessment

INTEC ARCHITECTURAL
DRAUGHTING
PROFESSIONAL
CERTIFICATE

• Understand reinforced concrete detailing.
• Produce detailed concrete reinforcing drawings.
• Compile drawings to detail and position columns
and piles.
• Compile detailed floor slab drawings.
• Produce detailed drawings for staircases.
• Produce and present bending schedules.

Articulation Mind Map

Course Outcomes

INTEC
INTRODUCTION
TO
DRAUGHTING
CERTIFICATE

You should be able to complete this course within 12 months.

CERTIFICATE:
AUTOCAD
(NQF4)

Course Duration

INTEC MECHANICAL
DRAUGHTING CERTIFICATE

The INTEC Reinforced Concrete Draughting Short Course
Certificate is part of the INTEC Career Starter Series. The
INTEC Reinforced Concrete Detailing Draughting Short
Course Certificate is an INTEC short course. This Programme
is approved by the INTEC College Academic Board.*

Grade 10 (Std. 8) with Technical
Drawing and Mathematics/Physical
Science or N2 with Engineering
Drawing

FURTHER EDUCATION &
TRAINING CERTIFICATE:
DRAUGHTING (NQF4)

Programme Type

FURTHER EDUCATION &
TRAINING CERTIFICATE
DRAUGHTING (NQF 4)

Grade 11 (Std. 9) with Mathematics or Technical Drawing or
equivalent, or relevant work experience (2 years).

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Instance ID                     : uuid:bd7f228a-baf6-b24b-887c-864f9bcc279a
Document ID                     : xmp.did:C0265ECD1F2068118083AEA87DD0DB0F
Original Document ID            : adobe:docid:indd:92ec735c-2c3f-11df-8e01-f04eeb2a7573
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:907C75C41F2068118083AEA87DD0DB0F
Derived From Document ID        : xmp.did:FC91581B0F2068118083C2D72DAE4C98
Derived From Original Document ID: adobe:docid:indd:92ec735c-2c3f-11df-8e01-f04eeb2a7573
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:0680117407206811A87FCB8CAB879825, xmp.iid:0780117407206811A87FCB8CAB879825, xmp.iid:060A6780322068119457C427840E199E, xmp.iid:01801174072068118EF1F61FBA8735A8, xmp.iid:05801174072068118EF1F61FBA8735A8, xmp.iid:B54AC0A216206811BFC1C167B9F99786, xmp.iid:B64AC0A216206811BFC1C167B9F99786, xmp.iid:FC7F117407206811A749B38523530C77, xmp.iid:FD7F117407206811A749B38523530C77, xmp.iid:FE7F117407206811A749B38523530C77, xmp.iid:19F3DF6B08206811B699FDAC1C591CCF, xmp.iid:C37260960B206811B699FDAC1C591CCF, xmp.iid:C47260960B206811B699FDAC1C591CCF, xmp.iid:C57260960B206811B699FDAC1C591CCF, xmp.iid:C67260960B206811B699FDAC1C591CCF, xmp.iid:C77260960B206811B699FDAC1C591CCF, xmp.iid:C87260960B206811B699FDAC1C591CCF, xmp.iid:0180117407206811A7BAD07AF04069DF, xmp.iid:FC7F11740720681188C6D90B78340966, xmp.iid:D2BAFF560E2068119457D164F2531730, xmp.iid:D3BAFF560E2068119457D164F2531730, xmp.iid:D4BAFF560E2068119457D164F2531730, xmp.iid:6A6191E3622068119457D164F2531730, xmp.iid:F97F117407206811A961CDE4B9BE6554, xmp.iid:FA7F117407206811A961CDE4B9BE6554, xmp.iid:FB7F117407206811A961CDE4B9BE6554, xmp.iid:FB7F117407206811A961C40BFAAFDD09, xmp.iid:B6ABF24A16206811A961C40BFAAFDD09, xmp.iid:F77F117407206811A613A9CF20EC11E6, xmp.iid:54EB2BD117206811B1A4AC3B2F2930F1, xmp.iid:9E8F330F4B206811AE56F18939A88C60, xmp.iid:9F8F330F4B206811AE56F18939A88C60, xmp.iid:F87F117407206811A7BA9ACB59B6669B, xmp.iid:CB4A880B35206811871F867C90D28EB0, xmp.iid:CC4A880B35206811871F867C90D28EB0, xmp.iid:E6857C1A37206811871F867C90D28EB0, xmp.iid:E7857C1A37206811871F867C90D28EB0, xmp.iid:E8857C1A37206811871F867C90D28EB0, xmp.iid:E9857C1A37206811871F867C90D28EB0, xmp.iid:48FCAF6A10206811822AAC2E83AAA467, xmp.iid:49FCAF6A10206811822AAC2E83AAA467, xmp.iid:D98BC5EC10206811822AAC2E83AAA467, xmp.iid:39BE3B8711206811822AAC2E83AAA467, xmp.iid:184F1A4014206811822AAC2E83AAA467, xmp.iid:714F602B15206811822AAC2E83AAA467, xmp.iid:47B32E0C16206811822AAC2E83AAA467, xmp.iid:A1737CC416206811822AAC2E83AAA467, xmp.iid:D9057F3B17206811822AAC2E83AAA467, xmp.iid:5FF6DE6C17206811822AAC2E83AAA467, xmp.iid:5081218F17206811822AAC2E83AAA467, xmp.iid:64C275A217206811822AAC2E83AAA467, xmp.iid:2A986FBF17206811822AAC2E83AAA467, xmp.iid:1E7C9DF119206811822AAC2E83AAA467, xmp.iid:466FF4121B206811822AAC2E83AAA467, xmp.iid:76057F9C1B206811822AAC2E83AAA467, xmp.iid:63BF3CC31B206811822AAC2E83AAA467, xmp.iid:7B0CD6F91B206811822AAC2E83AAA467, xmp.iid:97F230951C206811822AAC2E83AAA467, xmp.iid:8348A9C81D206811822AAC2E83AAA467, xmp.iid:CD28CAF31D206811822AAC2E83AAA467, xmp.iid:4CABC95F1E206811822AAC2E83AAA467, xmp.iid:28C9A9E71E206811822AAC2E83AAA467, xmp.iid:7274724A1F206811822AAC2E83AAA467, xmp.iid:24AAAA6E1F206811822AAC2E83AAA467, xmp.iid:943C6CB71F206811822AAC2E83AAA467, xmp.iid:5E23430624206811822AAC2E83AAA467, xmp.iid:72DDB9E338206811822AAC2E83AAA467, xmp.iid:6908B4BACE206811822AAC2E83AAA467, xmp.iid:BB0D8C06CF206811822AAC2E83AAA467, xmp.iid:BC0D8C06CF206811822AAC2E83AAA467, xmp.iid:BEC030E6CF206811822AAC2E83AAA467, xmp.iid:94F895F3CF206811822AAC2E83AAA467, xmp.iid:2E8BE506D0206811822AAC2E83AAA467, xmp.iid:DD289243D0206811822AAC2E83AAA467, xmp.iid:E5DAF78FD0206811822AAC2E83AAA467, xmp.iid:8D449A51D1206811822AAC2E83AAA467, xmp.iid:1382C06FD1206811822AAC2E83AAA467, xmp.iid:9D7CA68FD1206811822AAC2E83AAA467, xmp.iid:1E8A71FDD1206811822AAC2E83AAA467, xmp.iid:06A62C1ED2206811822AAC2E83AAA467, xmp.iid:AE4DB124D2206811822AAC2E83AAA467, xmp.iid:4A5FD758D2206811822AAC2E83AAA467, xmp.iid:27E41597D2206811822AAC2E83AAA467, xmp.iid:67C34CCBD2206811822AAC2E83AAA467, xmp.iid:8433F6DCD2206811822AAC2E83AAA467, xmp.iid:4BFC6200D3206811822AAC2E83AAA467, xmp.iid:647F6B49D3206811822AAC2E83AAA467, xmp.iid:0A4AE0CCD3206811822AAC2E83AAA467, xmp.iid:92BFA4B1D4206811822AAC2E83AAA467, xmp.iid:6B62C580D5206811822AAC2E83AAA467, xmp.iid:586759C1D5206811822AAC2E83AAA467, xmp.iid:0C1D3C17D6206811822AAC2E83AAA467, xmp.iid:FDCE6827D6206811822AAC2E83AAA467, xmp.iid:FECE6827D6206811822AAC2E83AAA467, xmp.iid:FFCE6827D6206811822AAC2E83AAA467, xmp.iid:1C25A536E0206811822AAC2E83AAA467, xmp.iid:37F3C53FE0206811822AAC2E83AAA467, xmp.iid:BED0B756E0206811822AAC2E83AAA467, xmp.iid:2AF9875CF2206811822AAC2E83AAA467, xmp.iid:2F7FDCB2F2206811822AAC2E83AAA467, xmp.iid:D0B1B0D2F2206811822AAC2E83AAA467, xmp.iid:D1B1B0D2F2206811822AAC2E83AAA467, xmp.iid:7445A735F3206811822AAC2E83AAA467, xmp.iid:B45A3E58F3206811822AAC2E83AAA467, xmp.iid:BDE4FFCDF3206811822AAC2E83AAA467, xmp.iid:B07DA71FF4206811822AAC2E83AAA467, xmp.iid:13E10F82AF216811822AAC2E83AAA467, xmp.iid:4C84D092AF216811822AAC2E83AAA467, xmp.iid:36F82CA5AF216811822AAC2E83AAA467, xmp.iid:37F82CA5AF216811822AAC2E83AAA467, xmp.iid:38F82CA5AF216811822AAC2E83AAA467, xmp.iid:475DC03F7E226811822AAC2E83AAA467, xmp.iid:B7FDECDB8A226811822AAC2E83AAA467, xmp.iid:468DED092E2068118C14BCB7A4B16D8F, xmp.iid:9AE31F122E2068118C14BCB7A4B16D8F, xmp.iid:27233D0B25236811822A9DA0F09BC5D3, xmp.iid:28233D0B25236811822A9DA0F09BC5D3, xmp.iid:355E111E25236811822A9DA0F09BC5D3, xmp.iid:087227F72111E1119F17904E59DB6F18, xmp.iid:4490E56D2511E1119F17904E59DB6F18, xmp.iid:2EB492BC2511E1119F17904E59DB6F18, xmp.iid:2873296F2811E1119F17904E59DB6F18, xmp.iid:02105E392911E1119F17904E59DB6F18, xmp.iid:E30CAB682911E1119F17904E59DB6F18, xmp.iid:62F63BDB2911E1119F17904E59DB6F18, xmp.iid:2B8687D12A11E1119F17904E59DB6F18, xmp.iid:779FDAE82A11E1119F17904E59DB6F18, xmp.iid:3A4A07302B11E1119F17904E59DB6F18, xmp.iid:3918AF7A2B11E1119F17904E59DB6F18, xmp.iid:EDEF3BAF2B11E1119F17904E59DB6F18, xmp.iid:C46EE6C92B11E1119F17904E59DB6F18, xmp.iid:B150BB1B2C11E1119F17904E59DB6F18, xmp.iid:48BD3A242C11E1119F17904E59DB6F18, xmp.iid:6DA4A56D2C11E1119F17904E59DB6F18, xmp.iid:B04B61832C11E1119F17904E59DB6F18, xmp.iid:27E208072D11E1119F17904E59DB6F18, xmp.iid:13108A882D11E1119F17904E59DB6F18, xmp.iid:924DBFD92D11E1119F17904E59DB6F18, xmp.iid:7FB9C6F42D11E1119F17904E59DB6F18, xmp.iid:F58BCB482E11E1119F17904E59DB6F18, xmp.iid:7013AE742E11E1119F17904E59DB6F18, xmp.iid:179F9C902E11E1119F17904E59DB6F18, xmp.iid:466F0BD42E11E1119F17904E59DB6F18, xmp.iid:C8409BDA2E11E1119F17904E59DB6F18, xmp.iid:95BD0E152F11E1119F17904E59DB6F18, xmp.iid:6EDCFB262F11E1119F17904E59DB6F18, xmp.iid:F5939D572F11E1119F17904E59DB6F18, xmp.iid:956FE5622F11E1119F17904E59DB6F18, xmp.iid:E890902F3211E1119F17904E59DB6F18, xmp.iid:27F13DC9B011E11182FADC29903EF3C8, xmp.iid:032D5D70B311E11182FADC29903EF3C8, xmp.iid:114128A7B311E11182FADC29903EF3C8, xmp.iid:18F0FE0DB411E11182FADC29903EF3C8, xmp.iid:71515838B411E11182FADC29903EF3C8, xmp.iid:D8AFD44CB411E11182FADC29903EF3C8, xmp.iid:8ED99D97B411E11182FADC29903EF3C8, xmp.iid:FD51A3E2B511E11182FADC29903EF3C8, xmp.iid:C0117921B611E11182FADC29903EF3C8, xmp.iid:5D98615EB611E11182FADC29903EF3C8, xmp.iid:0B2C336FB611E11182FADC29903EF3C8, xmp.iid:4485398EB711E11182FADC29903EF3C8, xmp.iid:553FB4D1B711E11182FADC29903EF3C8, xmp.iid:7B2887E3B711E11182FADC29903EF3C8, xmp.iid:2F02D46DB811E11182FADC29903EF3C8, xmp.iid:69D242B1B811E11182FADC29903EF3C8, xmp.iid:42460F9ABC11E11182FADC29903EF3C8, xmp.iid:4310C482BD11E11182FADC29903EF3C8, xmp.iid:E538EB3CBF11E11182FADC29903EF3C8, xmp.iid:94008FB6BF11E11182FADC29903EF3C8, xmp.iid:7B446339C111E11182FADC29903EF3C8, xmp.iid:46309F76C111E11182FADC29903EF3C8, xmp.iid:E065C0EAC111E11182FADC29903EF3C8, xmp.iid:FB947046C211E11182FADC29903EF3C8, xmp.iid:0AC4518AC211E11182FADC29903EF3C8, xmp.iid:61CA01A2C211E11182FADC29903EF3C8, xmp.iid:27C120BBC211E11182FADC29903EF3C8, xmp.iid:9C81F48DC411E11182FADC29903EF3C8, xmp.iid:5C28A67A4514E1118235CAFD6D09573E, xmp.iid:61B2F0904614E1118235CAFD6D09573E, xmp.iid:62B2F0904614E1118235CAFD6D09573E, xmp.iid:4691A3745A14E11191DDC3D6C41BBAF0, xmp.iid:7F0A93ED5A14E11191DDC3D6C41BBAF0, xmp.iid:AC601D87D414E111A5F2BC9784DBBA40, xmp.iid:4B5502EFD514E111A5F2BC9784DBBA40, xmp.iid:8F08B32E962068118083C717E18CB450, xmp.iid:9008B32E962068118083C717E18CB450, xmp.iid:714F7933962068118083C717E18CB450, xmp.iid:724F7933962068118083C717E18CB450, xmp.iid:DCC7F6BC962068118083C717E18CB450, xmp.iid:00BF3E74072068118A6DC307B279E57D, xmp.iid:4D2C12F80920681180838463045A8E2A, xmp.iid:41ABBABA0D20681180838463045A8E2A, xmp.iid:D051A5C49420681180838463045A8E2A, xmp.iid:7C1192D0182068118083B205A78E9A04, xmp.iid:BDF311F8182068118083B205A78E9A04, xmp.iid:BEF311F8182068118083B205A78E9A04, xmp.iid:17055531202068118083B205A78E9A04, xmp.iid:9E33F79A212068118083B205A78E9A04, xmp.iid:1BDD4149222068118083B205A78E9A04, xmp.iid:522C343ED32068118C149EF3AED82261, xmp.iid:86FBF05D552368118083A0A6928A0132, xmp.iid:87FBF05D552368118083A0A6928A0132, xmp.iid:22F34D61552368118083A0A6928A0132, xmp.iid:F1E3E723592368118083A0A6928A0132, xmp.iid:AAF7298AE32368118083A0A6928A0132, xmp.iid:31A84886E82368118083A0A6928A0132, xmp.iid:8E93C4B9E82368118083A0A6928A0132, xmp.iid:BE21F97DE92368118083A0A6928A0132, xmp.iid:EA5B3D81F02368118083A0A6928A0132, xmp.iid:CB410C861D2068118083EC532C416293, xmp.iid:E0F314ADB52168118083EC532C416293, xmp.iid:E50986EEBA2168118083EC532C416293, xmp.iid:05CFA77FC52168118083EC532C416293, xmp.iid:3784E9B8C52168118083EC532C416293, xmp.iid:A6C7D419692268118083EC532C416293, xmp.iid:21A18B30D92368118083EC532C416293, xmp.iid:AE8688600A20681180838C33D9B19554, xmp.iid:8BAEB1BD2B20681180838C1DAB4C64E7, xmp.iid:586188652D20681180838C1DAB4C64E7, xmp.iid:05CC90243820681180838C1DAB4C64E7, xmp.iid:4A7659E6512268118C14D13EA5C9D52D, xmp.iid:52498AB50D2068118083D65509A20315, xmp.iid:3E638D67172068118083D65509A20315, xmp.iid:CBF5FB8A172068118083D65509A20315, xmp.iid:CCF5FB8A172068118083D65509A20315, xmp.iid:CDF5FB8A172068118083D65509A20315, xmp.iid:927093861A2068118083D65509A20315, xmp.iid:88930D931A2068118083D65509A20315, xmp.iid:58B6B2B11D20681180839578044679AE, xmp.iid:05D5576A362068118A6DAC47BD5FAC54, xmp.iid:323D5FBD0C21681180839787DCE4DEDB, xmp.iid:51A388BD0C21681180839787DCE4DEDB, xmp.iid:AB545374082068118083D21FEAB92C7F, xmp.iid:A892E1170F2068118083C2D72DAE4C98, xmp.iid:A992E1170F2068118083C2D72DAE4C98, xmp.iid:AA92E1170F2068118083C2D72DAE4C98, xmp.iid:FC91581B0F2068118083C2D72DAE4C98, xmp.iid:8E7C75C41F2068118083AEA87DD0DB0F, xmp.iid:8F7C75C41F2068118083AEA87DD0DB0F, xmp.iid:907C75C41F2068118083AEA87DD0DB0F, xmp.iid:C0265ECD1F2068118083AEA87DD0DB0F, xmp.iid:C8683094BE2068118A6DFA56F36192A4, xmp.iid:BDCE559ECB2068118A6DFA56F36192A4, xmp.iid:0B276FA9B72068118083F6ED946A2E38, xmp.iid:D4A7DE0A422168118083F6ED946A2E38, xmp.iid:D09B8DC8532168118083F6ED946A2E38
History When                    : 2010:05:05 10:26:41+02:00, 2010:05:05 10:26:41+02:00, 2010:05:06 15:04:54+02:00, 2010:05:17 09:21:03+02:00, 2010:05:17 09:49:27+02:00, 2010:09:13 14:14:53+02:00, 2010:09:13 14:16:51+02:00, 2010:09:16 11:10:58+02:00, 2010:09:16 11:12:10+02:00, 2010:09:16 11:13:05+02:00, 2010:10:05 09:57:58+02:00, 2010:10:05 11:55:56+02:00, 2010:10:05 14:35:59+02:00, 2010:10:05 14:54:14+02:00, 2010:10:05 15:30+02:00, 2010:10:05 15:42:58+02:00, 2010:10:05 15:51:15+02:00, 2010:10:06 10:36:48+02:00, 2010:10:27 13:04:13+02:00, 2010:11:04 16:55:12+02:00, 2010:11:05 08:22:13+02:00, 2010:11:05 08:31:30+02:00, 2010:11:05 14:32:50+02:00, 2010:11:08 09:09:32+02:00, 2010:11:08 09:12:57+02:00, 2010:11:08 10:25:11+02:00, 2010:11:09 08:22:13+02:00, 2010:11:09 13:35:34+02:00, 2010:11:10 07:59:14+02:00, 2010:11:15 15:45:15+02:00, 2010:11:17 16:35:17+02:00, 2010:11:17 16:36:29+02:00, 2010:11:18 08:37:26+02:00, 2010:11:18 14:45:44+02:00, 2010:11:18 14:46:02+02:00, 2010:11:18 14:49:09+02:00, 2010:11:18 14:56:11+02:00, 2010:11:18 14:56:25+02:00, 2010:11:18 14:56:25+02:00, 2011:10:31 10:00:17+02:00, 2011:10:31 10:00:17+02:00, 2011:10:31 10:03:55+02:00, 2011:10:31 10:08:14+02:00, 2011:10:31 10:27:43+02:00, 2011:10:31 10:34:18+02:00, 2011:10:31 10:40:35+02:00, 2011:10:31 10:45:44+02:00, 2011:10:31 10:49:04+02:00, 2011:10:31 10:50:27+02:00, 2011:10:31 10:51:24+02:00, 2011:10:31 10:51:57+02:00, 2011:10:31 10:52:45+02:00, 2011:10:31 11:08:28+02:00, 2011:10:31 11:16:34+02:00, 2011:10:31 11:20:25+02:00, 2011:10:31 11:21:30+02:00, 2011:10:31 11:23:01+02:00, 2011:10:31 11:27:22+02:00, 2011:10:31 11:35:58+02:00, 2011:10:31 11:37:10+02:00, 2011:10:31 11:40:11+02:00, 2011:10:31 11:43:59+02:00, 2011:10:31 11:46:45+02:00, 2011:10:31 11:47:46+02:00, 2011:10:31 11:49:48+02:00, 2011:10:31 12:20:38+02:00, 2011:10:31 14:49:59+02:00, 2011:11:01 08:42:34+02:00, 2011:11:01 08:44:41+02:00, 2011:11:01 08:46:16+02:00, 2011:11:01 08:50:56+02:00, 2011:11:01 08:51:18+02:00, 2011:11:01 08:51:51+02:00, 2011:11:01 08:53:33+02:00, 2011:11:01 08:55:41+02:00, 2011:11:01 09:01:06+02:00, 2011:11:01 09:01:56+02:00, 2011:11:01 09:02:50+02:00, 2011:11:01 09:05:54+02:00, 2011:11:01 09:06:49+02:00, 2011:11:01 09:07+02:00, 2011:11:01 09:08:27+02:00, 2011:11:01 09:10:12+02:00, 2011:11:01 09:11:39+02:00, 2011:11:01 09:12:09+02:00, 2011:11:01 09:13:08+02:00, 2011:11:01 09:15:11+02:00, 2011:11:01 09:18:51+02:00, 2011:11:01 09:25:15+02:00, 2011:11:01 09:31:03+02:00, 2011:11:01 09:32:51+02:00, 2011:11:01 09:35:15+02:00, 2011:11:01 09:35:42+02:00, 2011:11:01 09:48:53+02:00, 2011:11:01 09:59:13+02:00, 2011:11:01 10:47:43+02:00, 2011:11:01 10:47:58+02:00, 2011:11:01 10:48:37+02:00, 2011:11:01 12:57:37+02:00, 2011:11:01 13:00:02+02:00, 2011:11:01 13:00:55+02:00, 2011:11:01 13:01:59+02:00, 2011:11:01 13:03:41+02:00, 2011:11:01 13:04:39+02:00, 2011:11:01 13:07:57+02:00, 2011:11:01 13:10:14+02:00, 2011:11:02 11:31:33+02:00, 2011:11:02 11:32:01+02:00, 2011:11:02 11:32:32+02:00, 2011:11:02 11:33:12+02:00, 2011:11:02 11:34:02+02:00, 2011:11:03 12:11:26+02:00, 2011:11:03 13:41:42+02:00, 2011:11:07 14:30:01+02:00, 2011:11:07 14:30:14+02:00, 2011:11:15 15:37:48+02:00, 2011:11:15 15:38:20+02:00, 2011:11:15 15:38:20+02:00, 2011:11:17 15:42:17+02:00, 2011:11:17 16:07:05+02:00, 2011:11:17 16:09:17+02:00, 2011:11:17 16:33:07+02:00, 2011:11:17 16:34:15+02:00, 2011:11:17 16:35:34+02:00, 2011:11:17 16:38:46+02:00, 2011:11:17 16:45:39+02:00, 2011:11:17 16:46:19+02:00, 2011:11:17 16:48:18+02:00, 2011:11:17 16:50:23+02:00, 2011:11:17 16:51:51+02:00, 2011:11:17 16:52:36+02:00, 2011:11:17 16:54:53+02:00, 2011:11:17 16:55:08+02:00, 2011:11:17 16:57:11+02:00, 2011:11:17 16:57:47+02:00, 2011:11:17 17:01:28+02:00, 2011:11:17 17:05:06+02:00, 2011:11:17 17:07:22+02:00, 2011:11:17 17:08:07+02:00, 2011:11:17 17:10:28+02:00, 2011:11:17 17:11:42+02:00, 2011:11:17 17:12:29+02:00, 2011:11:17 17:14:22+02:00, 2011:11:17 17:14:33+02:00, 2011:11:17 17:16:11+02:00, 2011:11:17 17:16:41+02:00, 2011:11:17 17:18:02+02:00, 2011:11:17 17:18:21+02:00, 2011:11:17 17:38:24+02:00, 2011:11:18 08:44:38+02:00, 2011:11:18 09:03:38+02:00, 2011:11:18 09:05:09+02:00, 2011:11:18 09:08:02+02:00, 2011:11:18 09:09:13+02:00, 2011:11:18 09:09:47+02:00, 2011:11:18 09:11:53+02:00, 2011:11:18 09:21:08+02:00, 2011:11:18 09:22:54+02:00, 2011:11:18 09:24:36+02:00, 2011:11:18 09:25:04+02:00, 2011:11:18 09:33:06+02:00, 2011:11:18 09:34:59+02:00, 2011:11:18 09:35:29+02:00, 2011:11:18 09:39:21+02:00, 2011:11:18 09:41:14+02:00, 2011:11:18 10:09:13+02:00, 2011:11:18 10:15:43+02:00, 2011:11:18 10:28:06+02:00, 2011:11:18 10:31:29+02:00, 2011:11:18 10:42:18+02:00, 2011:11:18 10:44:01+02:00, 2011:11:18 10:47:16+02:00, 2011:11:18 10:49:50+02:00, 2011:11:18 10:51:44+02:00, 2011:11:18 10:52:23+02:00, 2011:11:18 10:53:06+02:00, 2011:11:18 11:06:09+02:00, 2011:11:21 15:34:04+02:00, 2011:11:21 15:41:51+02:00, 2011:11:21 15:49:10+02:00, 2011:11:21 18:04:13+02:00, 2011:11:21 18:07:36+02:00, 2011:11:22 08:38:03+02:00, 2011:11:22 08:48:06+02:00, 2011:11:23 09:03:27+02:00, 2011:11:23 09:03:34+02:00, 2011:11:23 09:03:35+02:00, 2011:11:23 09:06:39+02:00, 2011:11:23 09:07:25+02:00, 2012:10:02 15:46:56+02:00, 2012:10:11 16:10:37+02:00, 2012:10:11 16:37:32+02:00, 2012:10:12 08:44:11+02:00, 2012:10:12 11:25:19+02:00, 2012:10:12 11:26:25+02:00, 2012:10:12 12:15:34+02:00, 2012:10:12 12:18:07+02:00, 2012:10:12 12:28:14+02:00, 2012:10:12 12:33:07+02:00, 2012:11:01 09:26:33+02:00, 2012:11:06 17:00:42+02:00, 2012:11:06 17:00:48+02:00, 2012:11:06 17:00:48+02:00, 2012:11:06 17:27:43+02:00, 2012:11:07 09:58:25+02:00, 2012:11:07 10:34:06+02:00, 2012:11:07 10:35:32+02:00, 2012:11:07 10:41:02+02:00, 2012:11:07 11:31:14+02:00, 2012:11:07 15:08:15+02:00, 2012:11:09 15:49:55+02:00, 2012:11:09 16:27:32+02:00, 2012:11:09 17:43:11+02:00, 2012:11:09 17:44:47+02:00, 2012:11:10 13:14:17+02:00, 2012:11:12 09:09:46+02:00, 2012:11:19 09:42:32+02:00, 2012:11:27 14:11:32+02:00, 2012:11:27 14:23:23+02:00, 2012:11:27 15:40:18+02:00, 2013:02:25 14:31:51+02:00, 2013:11:05 12:55:47+02:00, 2013:11:05 12:55:48+02:00, 2013:11:05 12:56:47+02:00, 2013:11:05 12:58:33+02:00, 2013:11:05 13:18:08+02:00, 2013:11:05 13:18:08+02:00, 2013:11:05 13:18:29+02:00, 2013:11:06 15:32:03+02:00, 2013:11:07 16:03:14+02:00, 2013:11:19 16:35:59+02:00, 2013:11:19 16:35:59+02:00, 2013:11:28 17:17:42+02:00, 2013:11:29 10:52:17+02:00, 2013:11:29 10:52:17+02:00, 2013:11:29 10:52:22+02:00, 2013:11:29 10:52:23+02:00, 2013:12:02 11:46+02:00, 2013:12:02 11:46+02:00, 2013:12:02 11:46:14+02:00, 2013:12:02 11:46:15+02:00, 2013:12:06 14:06:40+02:00, 2013:12:06 15:40:01+02:00, 2013:12:19 11:28:40+02:00, 2013:12:20 15:59:08+02:00, 2013:12:20 18:24:09+02:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Create Date                     : 2013:12:20 18:24:22+02:00
Modify Date                     : 2013:12:20 18:28:04+02:00
Metadata Date                   : 2013:12:20 18:28:04+02:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 8979 bytes, use -b option to extract), (Binary data 8786 bytes, use -b option to extract)
Doc Change Count                : 12786
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 18
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools

15008 15008A

Navigation menu

Versions of this User Manual:

Views

Navigation