ArubaOS 6.4.x CLI Reference Guide 1507990161arubaos6.4.xcli Ref Gde En Us
1507984879arubaos6.4.xcli_ref_gde_en-us DELL POWERCONNECT W-3200 pdf | FreeUserManuals.com
User Manual: DELL POWERCONNECT W-3400 pdf | FreeUserManuals.com
Open the PDF directly: View PDF 
.
Page Count: 2113
Reference Guide
Dell Networking W-Series
ArubaOS 6.4.x
Command-Line Interface
Copyright Information
© 2014 Aruba Networks, Inc. Aruba Networks trademarks include
, Aruba Networks®, Aruba
®
Wireless Networks , the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management
System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), or other Open
Source Licenses. Includes software from Litech Systems Design. The IF-MAP client library copyright 2011
Infoblox, Inc. All rights reserved. This product includes software developed by Lars Fenneberg, et al. The Open
Source code used can be found at this site:
arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to
terminate other vendors’ VPN client devices constitutes complete acceptance of liability by that individual or
corporation for this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that
might be taken against it with respect to infringement of copyright on behalf of those vendors.
0511633-01v1 | August 2014
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface
The Dell Networking W-Series ArubaOS 6.4.x command-line interface (CLI) allows you to configure and manage
Dell controllers. The CLI is accessible from a local console connected to the serial port on the controllers or
through a Telnet or Secure Shell (SSH) session from a remote management console or workstation.
Telnet access is disabled by default. To enable Telnet access, enter the telnet CLI command from a serial connection
or an SSH session, or in the WebUI navigate to the Configuration > Management > General page.
What's New In ArubaOS 6.4.x
New Commands
The following commands are introduced in ArubaOS 6.4.2.0:
Command
Description
ap-lacp-striping-ip
This command defines an AP LACP LMS map information profile that
maps a GRE striping IP address to an existing LMS-IP address, allowing
W-AP220 Series and W-AP270 Series AP to form a tunnel to a backup
controller in the event of a controller failover.
kernel coredump
This command enables the controller to capture the snapshot of the
working memory of the control plane when the control plane has
terminated abnormally.
show web-cc
This command display information about web content (web-cc)
classification settings, category and reputation types, classification
statistics and bandwidth contracts.
web-cc
This command defines global bandwidth contracts for HTTP traffic
matching a predefined web content category or reputation type.
Modified Commands
The following commands are modified in ArubaOS 6.4.2.0:
Command
Description
ap-rename
The service-tag parameter is introduced to identify an AP with its
service tag.
ap-regroup
The service-tag parameter is introduced to identify an AP with its
service tag.
ap system-profile
l
l
clear
l
The gre-striping-ip parameter is deprecated. GRE striping IP
settings are defined using the ap-lacp-striping-ip command.
The system-message-frequency parameter now accepts a value
in the range of 1-3600 seconds.
The web-cc cache and web-cc stats parameters are introduced, to
clear the web content classification category cache and statistics.
Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
The ArubaOS Command-Line Interface | 3
Command
firewall
Description
l
The datapath web-cc parameter is introduced, to clear datapath
web content classification statistics.
l
The web-cc parameter is introduced. This parameter enables web
content classification for all HTTP traffic. Once enabled, ArubaOS
enforces ACLs and bandwidth policies associated with web content
categories or reputation levels.
The web-cc-cache-miss-drop parameter is introduced. Issue this
command to allow the controller to drop any packets that do not
match any web content category or reputation levels in the
controller's internal web content cache.
l
ip access-list session
The web-cc-category and web-cc-reputation parameters are
introduced. Use these parameters to define a session ACL for traffic
matching a web content category or reputation level.
provision-ap
The service-tag parameter was introduced under reprovision
parameter.
rf dot11g-radio-profile
The very-high-throughput-rates-enable parameter is introduced.
This command enables very high throughput (VHT) rates on the 2.4
GHz band through the addition of VHT Modulation and Coding Scheme
values 8 and 9, providing 256-QAM modulation and encoding that
allows for 600 Mbit/sec performance over 802.11n networks. VHT rates
are supported on W-AP220 Series access points on both 20 and 40
MHz channels.
show ap database
The output of this command can display:
an s flag to indicate that the AP is enabled with a striping IP address.
l the service tag of an AP.
l
show ap debug lacp
If a GRE striping IP address is configured in the ap-lacp-striping-ip
profile, the output of this command displays the GRE striping IP
address.
show ap debug system-status
The format of the System Status Script output is changed to the
following:
function-name(line-num): new-total-drops/total-drops newpriority-drops/total-priority-drops
Example: wlc_dotxstatus(40576): 5034/3231117 4272/1907873
This change helps to determine if priority (voice or video) frames are
dropped from the AP Wi-Fi driver drop-list.
NOTE: The System Status Script is displayed for W-AP200 Series and
W-AP220 Series access points only.
show ap details
The output of this command can display the service tag of an AP.
show datapath
l
l
show firewall
4 | The ArubaOS Command-Line Interface
The session web-cc parameter is introduced. This command
displays web-content category information about the session.
The web-cc parameter is introduced. This command parameter
displays web-content classification table information, including the
web content category ID, reputation score, and URL.
The following parameters are introduced as part of the show firewall
command:
l Web Content Classification
l Web Content Cache Miss Drop
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Command
Description
show provisioning-ap-list
The output of this command can display the service tag of an AP.
user-role
l
l
wlan ssid-profile
The web-cc-category and web-cc-reputation parameters are
introduced. Use these parameters to create a user role that applies
a bandwidth contract to the specified web content category or
reputation level.
The web-cc disable parameter is introduced to disable web
content classification for this particular user-role.
The description of the multicast-rate parameter is changed to denote
the rate for video multicast frames.
Deprecated Commands
The following commands are deprecated in ArubaOS 6.4.2.0:
Command
Description
ap system-profile
The gre-striping-ip parameter is deprecated. GRE striping IP
settings are defined using the ap-lacp-striping-ip command.
New Commands
The following commands are introduced in ArubaOS 6.4.1.0:
Command
Description
ap regulatory activate
This command activates a specified Regulatory Cert and pushes it to
APs associated to the controller.
ap regulatory reset
This commanded deactivates and clears the currently activated
Regulatory Cert from APs associated to the controller.
file syncing profile
This command is used to configure the file syncing profile on the
controller.
show ap regulatory
This command displays the currently active Regulatory Cert on the
controller.
show file syncing profile
This command displays the file syncing configuration on the
controller.
Modified Commands
The following commands are modified in ArubaOS 6.4.1.0:
Command
Description
aaa profile
The user-idle-timeout parameter now accepts a value of 0.
airgroup
l
l
firewall
The Chromecast service is renamed to DIAL.
The googlecast service is introduced.
The following new sub-parameters are introduced:
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface | 5
Command
Description
l
l
ipv6 firewall
rf arm-profile
arp
grat-arp
The valid range for the following parameters is changed to <116384>:
l ping
l session
l tcp-syn
The default values for the following parameters are changed:
cm-band-g-max-signal
l cm-sticky-snr
l cm-sticky-min-signal
l cm-lb-client-thresh
l
show airgroup status
l
l
show airgroupservice
l
l
show ap arm client-match
restriction-table
show ap blacklist-clients
The Chromecast service is renamed to DIAL.
The googlecast service is introduced.
The Chromecast service is renamed to DIAL.
The googlecast service is introduced.
Following parameters are introduced:
PS deauth
l Probe(home/scan/bc_ssid)
l Auth(home/scan)
l Radio Bssid
The following parameters are modified:
l Time last restricted
l Restricted(Cur/Last)
l Time since last restricted
l
The following reason codes are introduced:
ARP-attack
l gratuitous-ARP-attack
l
show datapath
The following parameters are introduced as part of the show
datapath frame command output:
l Excessive ARP Requests
l Excessive Gratuitous ARP Requests
The acl id parameter has been added. This command
displays acl-id related information. The acl {[ap-name
| ip-addr ] name type }
command retrieves ACL related details from an access point using
the access point's name or ip-address.
show firewall
The following parameters are introduced as part of the show
firewall command output:
l Blacklist Grat ARP attack client
l Blacklist ARP attack client
l Monitor ARP attack
l Monitor Gratuitous ARP attack
show switches
The regulatory parameter was added.
show whitelist-db cpsec
The following new parameters are introduced:
cert-type
l page
l
6 | The ArubaOS Command-Line Interface
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Command
Description
l
l
show whitelist-db rap
start
state
The following new parameters are introduced:
apgroup
l apname
l fullname
l
user-role
The check-for-accounting parameter is introduced.
What’s New In ArubaOS 6.4.0.0
New Commands
The following commands are introduced in the ArubaOS 6.4.0.0:
Command
Description
airgroup static mdns-record
This command enables an administrator to add mDNS static
records to cache using the following methods:
Group mDNS static records
Individual mDNS static records
app lync traffic-control
This command creates a traffic control profile that allows the
controller to recognize and prioritize a specific type of Lync traffic in
order to apply QoS through the Lync Application Layer Gateway
(ALG).
dpi
This command configures Deep-Packet Inspection and the global
bandwidth contract for an application or application category for the
AppRF feature.
iap trusted-branch-db
This command configures an IAP-VPN branch as trusted.
pan active-profile
This command activates a configured PAN profile.
pan profile
This command is used to configure a PAN profile.
show aaa load-balance statistics
This command displays the load balancing statistics for RADIUS
servers.
show lldp interface
This command displays the LLDP interfaces information.
show lldp neighbor
This command displays information about LLDP peers.
show lldp statistics
This command displays the LLDP statistics information.
show iap detailed-table
This command displays the details of all the branches terminating at
the controller.
show pan active-profile
This command displays the currently active PAN profile.
show pan profile
This command displays all configured PAN profiles.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface | 7
Command
Description
show pan state
This command displays the current status of associated PAN
firewalls.
show pan statistics
This command displays PAN profile statistics.
show sso idp-profile
This command displays the configured SSO IDP profiles.
show ucc call-info cdrs
This command displays the Call Detailed Report (CDR) statistics for
Unified Communication and Collaboration (UCC).
show ucc client-info
This command displays the UCC client status and CDR statistics.
show ucc configuration
This command displays the UCC configuration in the controller.
show ucc statistics
This command displays the UCC call statistics in the controller.
show ucc trace-buffer
This command displays the UCC call message trace buffer for Lync,
SCCP, and SIP ALGs. Events such as establishing voice, video,
desktop sharing, and file transfer are recorded.
sso idp-profile
This command creates an SSO profile.
wlan hotspot advertisementprofile
This command configures a WLAN advertisement profile for an
802.11u public access service provider.
wlan hotspot anqp-3gpp-nwkprofile
This profile defines information for a 3rd Generation Partnership
Project (3GPP) Cellular Network for hotspots that have roaming
relationships with cellular operators.
wlan hotspot anqp-domain-nameprofile
This command defines the domain name to be sent in an Access
Network Query Protocol (ANQP) information element in a Generic
Advertisement Service (GAS) query response.
wlan hotspot anqp-ip-addr-availprofile
This command defines available IP address types to be sent in a
Access network Query Protocol (ANQP) information element in a
Generic Advertisement Service (GAS) query response.
wlan hotspot anqp-nai-realmprofile
This command defines a Network Access Identifier (NAI) realm
whose information can be sent as an Access network Query
Protocol (ANQP) information element in a Generic Advertisement
Service (GAS) query response.
wlan hotspot anqp-nwk-authprofile
This command configures an ANQP Network Authentication profile
to define authentication type being used by the hotspot network.
wlan hotspot anqp-roam-consprofile
This command configures the Roaming Consortium OI information
to be sent in an Access network Query Protocol (ANQP) information
element in a Generic Advertisement Service (GAS) query response.
wlan hotspot anqp-venue-nameprofile
This command defines venue information be sent in an Access
network Query Protocol (ANQP) information element in a Generic
Advertisement Service (GAS) query response.
wlan hotspot h2qp-conncapability-profile
This command defines a Hotspot 2.0 Query Protocol (H2QP) profile
that advertises hotspot protocol and port capabilities.
wlan hotspot h2qp-op-cl-profile
This command defines a Hotspot 2.0 Query Protocol (H2QP) profile
that defines the Operating Class to be sent in the ANQP IE.
8 | The ArubaOS Command-Line Interface
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Command
Description
wlan hotspot h2qp-operatorfriendly-name-profile
This command defines a Hotspot 2.0 Query Protocol (H2QP)
operator-friendly name profile. The operator-friendly name
configured in this profile is a free-form text field that can identify the
operator and also something about the location.
wlan hotspot h2qp-wan-metricsprofile
This command creates a Hotspot 2.0 Query Protocol (H2QP) profile
that specifies the hotspot WAN status and link metrics.
wlan hotspot hs2-profile
This command configures a hotspot profile for an 802.11u public
access service provider.
Modified Commands
The following commands are modified in ArubaOS 6.4.0.0:
Command
Description
airgroup
The dlna and mdns parameters are introduced.
aaa authentication captive-portal
The url-hash-key parameter is introduced.
aaa authentication-server radius
The called-station-id parameter is introduced.
aaa authentication via authprofile
The pan-integration parameter is introduced.
aaa authentication vpn
The pan-integration parameter is introduced.
aaa profile
The multiple-server-accounting and download-role parameters
are introduced.
The pan-integration parameter is introduced.
aaa server-group
The load-balance parameter is introduced.
clear
The lldp parameter is introduced.
The Server and User options are introduced under airgroup
parameter.
crypto dynamic-map
The disable/enable parameters are introduced.
crypto isakmp policy
The disable/enable and no parameters are introduced.
firewall
The following parameters are added:
allow-stun
l dpi
l stall-crash
l
ha
The following parameters are introduced to support the high
availability inter-controller heartbeat, controller oversubscription
and state synchronization features.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface | 9
Command
Description
l
l
l
l
l
l
heartbeat:
heartbeat-interval
heartbeat-threshold
over-subscription
pre-shared-key
state-sync
interface fastethernet |
gigabitethernet
The lldp parameter is introduced.
interface vlan
The dhcp parameter for configuring dynamic host configuration
protocol for IPv6 is introduced.
interface tunnel
Tunnel destination ipv6, tunnel mode gre ipv6, tunnel source ipv6,
parameters are introduced.
ip access-list session
The redirect parameter is introduced under action. The app, and
appcategory parameters are introduced under service.
ip igmp
The ssm-range parameter is introduced.
ipv6 mld
The ssm-range parameter is introduced.
ipv6 route
The vlan parameter is introduced.
ntp server
The IPv6 parameter is introduced.
show aaa authentication-server
radius
The called-station-id parameter is added to the output of this
command.
show airgroup
The dlna and mdns parameters were introduced in the following
commands:
l show airgroup blocked-queries
l show airgroup blocked-service-id
l show airgroup internal-state statistics
The dlna, mdns , and verbose parameters were introduced in the
following commands:
l show airgroupservice
l show airgroup servers
l show airgroup users
The dlna, mdns , and static parameters were introduced in the
following command:
l show airgroup cache entries
show airgroupservice
The dlna, mdns, and verbose parameters were introduced.
show app lync traffic-control
The profile-name parameter is introduced.
show datapath
The following parameters are introduced:
dpi
l session dpi
l session ipv6 dpi
l session session-id dpi
l
show ipv6 interface
10 | The ArubaOS Command-Line Interface
The tunnel parameter is introduced in the output.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Command
Description
show ipv6 mld config
The ssm-range parameter is introduced.
show ipv6 mld group
The mode and age parameters are introduced.
show ntp peer
The IPv6 parameter is introduced.
show ntp servers
Flags indicating the status of the server, are introduced.
show ntp status
The following parameters are introduced:
time since restart
l packets received
l packets processed
l current version
l previous version
l declined
l access denied
l bad length or format
l bad authentication
l rate exceeded
l
show voice real-time-analysis
The following parameters are deprecated:
Jitter(U)(msec)
l rvalue(U)
l Pkt-loss(U)(%)
l Delay(U)(usec)
l Jitter(D)(msec)
l rvalue(D)
The following new parameters are introduced:
l Jitter(D)(usec)
l UCC Score
l
show vrrp
The ipv6, stats, and summary parameters are introduced.
snmp-server
The IPv6 parameter is introduced.
user-role
The following parameters are introduced:
bandwidth-contract app
l bandwidth-contract appcategory
l bandwidth-contract exclude
l traffic-control-profile
l sso
l
vrrp
The IPv6 parameter is introduced.
web-server
The idp-certificate parameter is introduced.
wlan ssid-profile
l
l
The mfp-capable and mfp-required parameters are added.
The eapol-rate-opt parameter is enabled by default.
Deprecated Commands
The following commands are deprecated in ArubaOS 6.4.0.0:
Command
Description
interface tunnel
The checksum parameter is deprecated.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface | 11
Command
Description
app lync traffic-control
(deprecated)
This command is deprecated and replaced by app lync trafficcontrol .
About this Guide
This guide describes the Dell Networking W-Series ArubaOS 6.4.x command syntax. The commands in this
guide are listed alphabetically.
The following information is provided for each command:
l
Command Syntax—The complete syntax of the command.
l
Description—A brief description of the command.
l
Syntax—A description of the command parameters, including license requirements for specific parameters
if needed. The applicable ranges and default values, if any, are also included.
l
Usage Guidelines—Information to help you use the command, including: prerequisites, prohibitions, and
related commands.
l
Example—An example of how to use the command.
l
Command History—The version of ArubaOS in which the command was first introduced. Modifications and
changes to the command are also noted.
l
Command Information—This table describes any licensing requirements, command modes and platforms
for which this command is applicable. For more information about available licenses, see the Licenses
chapter of the Dell Networking W-Series ArubaOS 6.4.x User Guide.
Connecting to the Controller
This section describes how to connect to the controller to use the CLI.
Serial Port Connection
The serial port is located on the front panel of the controller. Connect a terminal or PC/workstation running a
terminal emulation program to the serial port on the controller to use the CLI. Configure your terminal or
terminal emulation program to use the following communication settings.
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
9600
8
None
1
None
The Dell W-7200 Series controller supports baud rates between 9600 and 115200.
Telnet or SSH Connection
Telnet or SSH access requires that you configure an IP address and a default gateway on the controller and
connect the controller to your network. This is typically performed when you run the Initial Setup on the
controller, as described in the Dell Networking W-Series ArubaOS 6.4.x Quick Start Guide. In certain deployments,
you can also configure a loopback address for the controller; see interface loopback on page 410 for more
information.
12 | The ArubaOS Command-Line Interface
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Configuration changes on Master Controllers
Some commands can only be issued when connected to a master controller. If you make a configuration
change on a master controller, all connected local controllers will subsequently update their configurations as
well. You can manually synchronize all of the controllers at any time by saving the configuration on the master
controller.
CLI Access
When you connect to the controller using the CLI, the system displays its host name followed by the login
prompt. Log in using the admin user account and the password you entered during the Initial Setup on the
controller (the password displays as asterisks). For example:
(host)
User: admin
Password: *****
When you are logged in, the user mode CLI prompt displays. For example:
(host) >
User mode provides only limited access for basic operational testing such as running ping and traceroute.
Certain management functions are available in enable (also called “privileged”) mode. To move from user mode
to enable mode requires you to enter an additional password that you entered during the Initial Setup (the
password displays as asterisks). For example:
(host) > enable
Password: ******
When you are in enable mode, the > prompt changes to a pound sign (#):
(host) #
Configuration commands are available in config mode. Move from enable mode to config mode by entering
configure terminal at the # prompt:
(host) # configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
When you are in basic config mode, (config) appears before the # prompt:
(host) (config) #
There are several other sub- command modes that allow users to configure individual interfaces, subinterfaces,
loopback addresses, GRE tunnels and cellular profiles. For details on the prompts and the available commands for
each of these modes, see Appendix A: Command Modes on page 2111.
Command Help
You can use the question mark (?) to view various types of command help.
When typed at the beginning of a line, the question mark lists all the commands available in your current mode
or sub-mode. A brief explanation follows each command. For example:
(host) > ?
enable
logout
ping
traceroute
Turn on Privileged commands
Exit this session. Any unsaved changes are lost.
Send ICMP echo packets to a specified IP address.
Trace route to specified IP address.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
The ArubaOS Command-Line Interface | 13
When typed at the end of a possible command or abbreviation, the question mark lists the commands that
match (if any). For example:
(host) > c?
clear
clock
configure
copy
Clear configuration
Configure the system clock
Configuration Commands
Copy Files
If more than one item is shown, type more of the keyword characters to distinguish your choice. However, if
only one item is listed, the keyword or abbreviation is valid and you can press tab or the spacebar to advance
to the next keyword.
When typed in place of a parameter, the question mark lists the available options. For example:
(host) # write ?
erase
file
memory
terminal
Erase
Write
Write
Write
and start from scratch
to a file in the file system
to memory
to terminal
The indicates that the command can be entered without additional parameters. Any other parameters are
optional.
Command Completion
To make command input easier, you can usually abbreviate each key word in the command. You need type
only enough of each keyword to distinguish it from similar commands. For example:
(host) # configure terminal
could also be entered as:
(host) # con t
Three characters (con) represent the shortest abbreviation allowed for configure. Typing only c or co would
not work because there are other commands (like copy) which also begin with those letters. The configure
command is the only one that begins with con.
As you type, you can press the spacebar or tab to move to the next keyword. The system then attempts to
expand the abbreviation for you. If there is only one command keyword that matches the abbreviation, it is
filled in for you automatically. If the abbreviation is too vague (too few characters), the cursor does not
advance and you must type more characters or use the help feature to list the matching commands.
Deleting Configuration Settings
Use the no command to delete or negate previously-entered configurations or parameters.
l
To view a list of no commands, type no at the enable or config prompt followed by the question mark. For
example:
(host) (config) # no?
l
To delete a configuration, use the no form of a configuration command. For example, the following
command removes a configured user role:
(host) (config) # no user-role
l
To negate a specific configured parameter, use the no parameter within the command. For example, the
following commands delete the DSCP priority map for a priority map configuration:
(host) (config) # priority-map
(host) (config-priority-map) # no dscp priority high
14 | The ArubaOS Command-Line Interface
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide
Saving Configuration Changes
Each Dell controller contains two different types of configuration images.
The running-config holds the current controller configuration, including all pending changes which have yet
to be saved. To view the running-config, use the following command:
l
(host) # show running-config
The startup config holds the configuration which will be used the next time the controller is rebooted. It
contains all the options last saved using the write memory command. To view the startup-config, use the
following command:
l
(host) # show startup-config
When you make configuration changes via the CLI, those changes affect the current running configuration
only. If the changes are not saved, they will be lost after the controller reboots. To save your configuration
changes so they are retained in the startup configuration after the controller reboots, use the following
command in enable mode:
(host) # write memory
Saving Configuration...
Saved Configuration
Both the startup and running configurations can also be saved to a file or sent to a TFTP server for backup or
transfer to another system.
Commands That Reset the Controller or AP
If you use the CLI to modify a currently provisioned and running radio profile, those changes take place
immediately; you do not reboot the controller or the AP for the changes to affect the current running
configuration. Certain commands, however, automatically force the controller or AP to reboot. You may want
to consider current network loads and conditions before issuing these commands, as they may cause a
momentary disruption in service as the unit resets. Note also that changing the lms-ip parameter in an AP
system profile associated with an AP group will cause all APs in that AP group to reboot.
Table 1: Reset Commands
Commands that Reset an AP
l
l
l
l
l
l
l
l
l
ap-regroup
ap-rename
apboot
provision-ap
ap wired-ap-profile forward-mode {bridge|splittunnel|tunnel}
wlan virtual-ap {aaa-profile |forward-mode {tunnel|bridge|splittunnel|decrypt-tunnel} |ssid-profile |vlan
...}
ap system-profile {bootstrap-threshold
|lms-ip |}
wlan ssid-profile {battery-boost|denybcast|essid|opmode|strict-svp |wepkey1
|wepkey2 |wepkey3 |wepkey4
|weptxkey |wmm |wmm-be-dscp |wmm-bk-dscp |wmm-ts-min-inactint |wmm-vi-dscp