1628 Stick To It Lift Tape Cat. No. 225 9808 Product Data Bulletin Publication PDF

User Manual: 1628

Open the PDF directly: View PDF PDF.
Page Count: 1

• Easytouse,inexpensive
• Nobaggies,glassslides,orsampleloss
• Consistentsampleareaforbetterdatainterpretation
• Flexibleplasticforsamplingirregularsurfaces
• Individuallyserializedforeasysample
 identication
• Slidemailermaintainssampleintegrity
Description
Stick-to-it is a exible clear plastic microscope slide with an
adhesive area that can be used to sample for possible biologi-
cal and inorganic dust contamination on surfaces. Analysis of
samples can indicate the relative degree of contamination on
surfaces and the types of fungi present.
The Stick-to-it Advantage
•Non-destructive: Use Stick-to-it safely on most surfaces.
•Flexible: No glass slide to break during sample transport.
•Easier to handle: Unlike tape, Stick-to-it allows a quick,
mess-free sample, effective transport to a laboratory, and easy
microscopic analysis. NO baggies, glass slides, cross contami-
nation, sample loss, slide breakage, or slide mounting.
•Time-saving: Good for initial site sampling to indicate whether
or not further sampling is needed. Stick-to-it samples indicate
mold is present in a specic area and may reveal indoor areas
contaminated with spores that have not become airborne.
SKCInc. 724-941-9701 SKCWest 714-992-2780 SKCGulfCoast 281-859-8050 SKCSouth 434-352-7149
www.skcinc.com
Stick-to-it Lift Tape
Publication 1628 Rev 1302
For Surface Sampling of Biological Contaminants
Using Stick-to-it
Remove slide from the mailer.
Document required information for the laboratory.
Remove liner from the adhesive. (Pull liner from top down
for best results.)
Press adhesive area to surface to be sampled.
Place slide into provided slide mailer.
Send to an accredited laboratory for analysis.
Slide mailer
for sample
integrity
Ordering Information
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return
Policy, which provides SKC’s sole liability and the buyer’s exclusive
remedy. To view the complete SKC Limited Warranty and Return Policy,
go to http://www.skcinc.com/warranty.asp.
Adhesive area
Description Cat. No./Qty.
Stick-to-it 225-9808/10
225-9809/50

Navigation menu