MSDS_Fuser Cleaning Felt L1524_181784 181784

181784 181784

181784 181784

181784 181784

User Manual: 181784

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadMSDS_Fuser Cleaning Felt L1524_181784 181784
Open PDF In BrowserView PDF
Material Safety Data Sheet

U.S. Department of Labor

May be used to comply with
OSHA's Hazard Communication
Standard. 29 CFR 1910.1200. Standard
must be consulted for specific requirements.

Occupational Safety and Health Administration
(Non-Mandatory Form)
Form Approved
OMB No. 1218-0072

End-User Copy
____________________________________________________________________________________________________
Identity
L1524 Fuser Cleaning Felt

Printronix P/N 704539-146

____________________________________________________________________________________________________
Section 1
____________________________________________________________________________________________________
Manufacturer's Name

Emergency Telephone Number

Printronix, Inc.

(714) 368-2300

Address (Number, Street, City, State, and ZIP Code)

Telephone number for information

Irvine, CA 92606

Date Prepared

14600 Myford Road

(714) 368-2573
June 23, 2003

Signature of Preparer (Optional)

Robert J. Bilanchone, CSP

Section II - Hazardous Ingredients/Identity Information
___________________________________________________________________________________________________
Hazardous Components
(Specific Chemical Identity: Common Name(s)

OSHA PEL

ACGIH TLV

Other Limits
Other Limits
Recommended

% (Optional)

___________________________________________________________________________________________________
Poly (dimethylsiloxane)

CAS# 63148-62-9

<1%

__________________________________________________________________________________________________
Section III - Physical/Chemical Characteristics
___________________________________________________________________________________________________
Boiling Point:

N/A

Specific Gravity (H2O = 1)

N/A

Vapor Pressure (mm Hg.):

N/A

Melting Point:

N/A

Vapor Density (AIR = 1):

N/A

Evaporation Rate
(Butyl Acetate = 1):

N/A

Solubility in Water: N/A
Appearance and Odor: Felt pad with faint odor.

181784-000 Rev A

Page 1 of 3

Section IV - Fire and Explosion Hazard Data
____________________________________________________________________________________________________
Flash Point (Method Used): N/A

Flammable Limits:

LEL:

UEL:

N/A

Extinguishing Media: Use water, foam or dry chemical.
Special Fire Fighting Procedures: Avoid inhalation of smoke. Use NIOSH-approved self-contained breathing apparatus if large

quantity of product is involved in a fire.
Unusual Fire and Explosion Hazards: Never use a welding or cutting torch on or near.

Section V - Reactivity Data
____________________________________________________________________________________________________
Stability

Unstable

Conditions to avoid

X

Stable

None

Incompatibility (Materials to avoid):
Hazardous Decomposition or Byproducts: Products of combustion are toxic. Avoid breathing smoke.
Hazardous
Polymerization:

Conditions to Avoid:

May Occur
Will Not
Occur

X

None

Section VI - Health Hazard Data
____________________________________________________________________________________________________
Route(s) of Entry:

and non-sensitizer.

Inhalation? Breathing small amounts of this material is not likely to be harmful.
Ingestion? Practically non-toxic.

Skin? A non-irritant

Health Hazards (Acute and Chronic): Not an irritant to eyes.
Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Signs and Symptoms of Exposure:
Medical Conditions
Generally Aggravated by Exposure:
Emergency and First Aid Procedures: In case of contact with eyes, flush eyes thoroughly with water. In case of skin contact, wash
with soap and cool water. If ingested, dilute stomach contents by drinking several glasses of water. In case of inhalation,
remove from exposure.

Section VII - Precautions for Safe Handling and Use
_____________________________________________________________________________________________________
Steps to be Taken in Case Material is Released or Spilled: Due to small quantity contained in product, this is unlikely to occur.
Waste Disposal Method: Do not incinerate. No special techniques beyond normal practice. Dispose of in conformity with

181784-000 Rev A

Page 2 of 3

applicable local, state and federal regulations.
Precautions to be Taken in Handling and Storing: None
Other Precautions: Avoid contamination of food, drink, etc.

Section VIII - Control Measures
____________________________________________________________________________________________________
Respiratory Protection (Specify Type): None required when used as intended in printer equipment.
Ventilation

Local Exhaust

Special:

Mechanical (General)

Other:

Protective Gloves: None required when used as intended in

Eye Protection: None required when used as intended in printer

printer equipment.

equipment.

Other Protective Clothing or Equipment: N/A
Work/Hygienic Practices: None

Section IX- Regulatory Information
_________________________________________________________________________________________________________________
No data given.

Section X- Toxicological Information
_____________________________________________________________________________________________________
This material, when used as intended, does not represent a health or safety hazard.

Section XI- Ecological Information

_______________________________________________________________________________________________________________

No data given.

Section XII- Transport Information

_______________________________________________________________________________________________________________
No data given.

________________________________________________________________________________________________________
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best
of the knowledge and belief of Printronix, Inc., but is not guaranteed to be so. Since conditions of use are beyond the control of
Printronix, Inc., no warranties are made, expressed or implied, except those that may be contained in the written contract of sale or
acknowledgement. It is the user’s responsibility to determine the suitability of this material for a specific purpose and to adopt such
safety precautions as may be necessary.
________________________________________________________________________________________________________

181784-000 Rev A

Page 3 of 3
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2004:02:04 14:39:11-08:00
Modify Date                     : 2004:02:04 14:39:11-08:00
Page Count                      : 3
Creation Date                   : 2004:02:04 22:39:11Z
Mod Date                        : 2004:02:04 22:39:11Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : vale_ca
Metadata Date                   : 2004:02:04 22:39:11Z
Creator                         : vale_ca
Title                           : Microsoft Word - MSDS_Fuser Cleaning Felt L1524_181784.doc
EXIF Metadata provided by EXIF.tools

Navigation menu