19MDTR20_17 19MDTR20

User Manual: 19MDTR20

Open the PDF directly: View PDF PDF.
Page Count: 399 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Color TV with Built-In VCR/DVD Player
First Issue: 5/03
2003 Philips Consumer Electronics Company
Philips Consumer Electronics Company
A Division of Philips Electronics North America Corporation
Technical Service Data
Service Solutions Group
Technical Publications Dept.
P.O. Box 555, 401 E. Old Andrew Johnson Hwy.
Jefferson City,TN 37760
MANUAL 5891
Sec. 1A: Main Section
( 27MDTR20S/17 )
MAGNAVOX
Model: 27MDTR20S/17
Sec. 2: Deck Mechanism Section
MANUAL 5891 Color TV with Built-In VCR/DVD Player Magnavox 27MDTR20S/17, 19MDTR20/17
Color TV with Built-In VCR/DVD Player
Service Manual
MAGNAVOX
Model: 19MDTR20/17
Supplement 1
Sec. 1B: Main Section
( 19MDTR20/17 )
Specifications
Adjustment Procedures
Schematic Diagrams and CBA’s
Exploded Views
Cabinet & Electrical Parts Lists
Philips Consumer Electronics Company
A Division of Philips Electronics North America Corporation
Technical Service Data
Service Solutions Group
Technical Publications Dept.
P.O. Box 555, 401 E. Old Andrew Johnson Hwy.
Jefferson City,TN 37760
MANUAL 5891
MAGNAVOX
Model: 19MDTR20/17
Color TV with Built-In VCR/DVD Player
Service Manual
Color TV with Built-In VCR/DVD Player
First Issue: 5/03
2003 Philips Consumer Electronics Company
Supplement 1
Sec. 1B: Main Section
( 19MDTR20/17 )
Specifications
Adjustment Procedures
Schematic Diagrams and CBA’s
Exploded Views
Cabinet & Electrical Parts Lists
IMPORTANT SAFETY NOTICE
Proper service and repair is important to the safe, reliable operation of all
Philips Consumer Electronics Company** Equipment. The service procedures
recommended by Philips and described in this service manual are effective
methods of performing service operations. Some of these service operations
require the use of tools specially designed for the purpose. The special tools
should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and
NOTICES which should be carefully read in order to minimize the risk of per-
sonal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It also is important to understand that
these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Philips could not
possibly know, evaluate and advise the service trade of all conceivable ways
in which service might be done or of the possible hazardous consequences of
each way. Consequently, Philips has not undertaken any such broad evalua-
tion. Accordingly, a servicer who uses a service procedure or tool which is
not recommended by Philips must first satisfy himself thoroughly that neither
his safety nor the safe operation of the equipment will be jeopardized by the
service method selected.
** Hereafter throughout this manual, Philips Consumer Electronics Company
will be referred to as Philips.
WARNING
Critical components having special safety characteristics are identified
with a # by the Ref. No. in the parts list and enclosed within a broken
line* (where several critical components are grouped in one area) along
with the safety symbol # on the schematics or exploded views.
Use of substitute replacement parts which do not have the same specified
safety characteristics may create shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered
without written permission from Philips. Philips assumes no liability,
express or implied, arising out of any unauthorized modification of
design. Servicer assumes all liability.
* Broken Line
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
TABLE OF CONTENTS
Note:
One model, 19MDTR20/17, is covered by Supplement 1. This section only shows what differs between this model and
its base model covered by Section 1A and the Deck Mechanism Section.
[ Main Section ]
Page
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1-1
PREPARATION FOR SERVICING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2-1
CABINET DISASSEMBLY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3-1
ELECTRICAL ADJUSTMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4-1
Adjustment Points and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4-7
BLOCK DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-1
Servo/System Control Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-1
Video Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-3
Audio Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-5
Hi-Fi Audio Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-7
Chroma Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-9
CRT/H.V. Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-11
Power Supply Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-13
DVD System Control/Servo Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-15
Digital Signal Process Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-17
DVD Audio Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-19
SCHEMATIC DIAGRAMS / CBA’S AND TEST POINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-1
Main 1/5 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-2
Main 1/5 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-3
Main 2/5 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-5
Main 2/5 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-7
Main 3/5 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-8
Main 3/5 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-9
Main 4/5 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-11
Main 4/5 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-13
Main 5/5 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-14
Main 5/5 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-15
Main CBA Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-17
Main CBA Top View <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-19
Main CBA Bottom View <TV/VCR SECTION>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-21
Power Supply/AV CBA Top View <TV/VCR SECTION>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-23
Power Supply/AV CBA Bottom View <TV/VCR SECTION>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-25
Power Supply/AV CBA Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-27
Power Supply/AV 1/2 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-29
Power Supply/AV 1/2 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-31
Power Supply/AV 2/2 Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-33
Power Supply/AV 2/2 Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-35
H.V.Schematic Diagram Parts Location Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-36
H.V. Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-37
Junction A/B CBA Top/Bottom View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-39
H.V. CBA Parts Location Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-40
H.V. CBA Top View <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-41
H.V. CBA Bottom View <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-43
CRT Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-45
Function Schematic Diagram <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-45
CRT CBA Top/Bottom View <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-47
Function CBA Top/Bottom View <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-49
DVD Main 1/3 Schematic Diagram <DVD SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-51
DVD Main 2/3 Schematic Diagram <DVD SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-53
IC101 Voltage Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-55
DVD Main 3/3 Schematic Diagram <DVD SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-57
WIRING DIAGRAM <TV/VCR SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7-1
WIRING DIAGRAM <DVD SECTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7-3
IC PIN FUNCTION DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8-1
LEAD IDENTIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9-1
ELECTRICAL PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10-1
EXPLODED VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11-1
MECHANICAL PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12-1
1-1-1 TD851SP
SPECIFICATIONS
Mode---------SP mode unless otherwise specified
*Test input terminal
<Except Tuner>-------------Video input (1Vp-p)
Audio input (-10dB)
<Tuner>-----------------------Ant. input (80dBµV) Video: 87.5%
Audio: 25kHz dev (1kHz Sin)
<DEFLECTION>
<VIDEO & CHROMA>
<DVD>
Description Condition Unit Nominal Limit
1. Over Scan % 90
2. Linearity Horizontal % 15
Vertical % 10
3. High Voltage kV 25
Description Condition Unit Nominal Limit
1. Misconvergence
Center m/m 0.4
Corner m/m 2.5
Side m/m 1.5
2. Tint Control Range deg ±30
3. Contrast Control Range dB 6 2
4. Brightness (100% White Full Field) Contrast: Max ft-L 35 24
5. Color Temperature K 9200
Description Condition Unit Nominal Limit
1. Horizontal Resolution (TDV-540 TIT.2 CHP.16) Line 330 320
2. Video S/N at CN3400 (TDV-540 TIT.2 CHP.6) dB 60 55
3. S/N Chroma at CN3400 AM dB 58 53
(TDV-540 TIT.2 CHP.17) PM dB 58 53
4. Audio Distortion (LPCM 48 kHz, W/LPF)
(PTD 1-NOR TIT.1 CHP.1)
L
R%0.03
0.03
0.07
0.07
5. Audio freq. response (LPCM 48kHz)
(PTD 1-NOR TIT.1 CHP.5 -- 10)
L, 20 Hz
R, 20 Hz
L, 20 kHz
R, 20 kHz
dB 0 +4/-5
6. Audio S/N (LPCM 48KHz,W/LPF,A-WTD)
(PTD 1-NOR TIT.1 CHP.1 -- 2)
L
RdB 85 75
1-1-2 TD851SP
<VCR>
<TUNER>
<NORMAL AUDIO>
All items are measured across 8 resistor at speaker output terminal.
<Hi-Fi AUDIO>
All items are measured at TP1701 and TP1702.
Note: Nominal specifications represent the design specifications. All units should be able to approximate these.
Some will exceed and some may drop slightly below these specifications. Limit specifications represent the abso-
lute worst condition that still might be considered acceptable. In no case should a unit fail to meet limit specifica-
tions.
Description Condition Unit Nominal Limit
1. Horizontal Resolution (R/P, SP) Line 230 200
2. Jitter (Low) (R/P, SP) µS0.1 0.2
3. S/N Chroma AM(SP) (R/P, SP) dB 38 33
PM(SP) (R/P, SP) dB 38 33
4. Wow & Flutter (JIS, UNWTD) (R/P, SP) % 0.25 0.5
Description Condition Unit Nominal Limit
1. Video S/N (80dBµV, TV4ch) dB 45 40
2. Audio S/N (W/LPF) dB 45 40
Description Condition Unit Nominal Limit
1. Audio Output Power (R/P, SP) W 1.0 0.8
2. Audio S/N (W/LPF) (R/P, SP) dB 40 36
3. Audio distortion (W/LPF,-10dB 1kHz IN) (R/P, SP) % 3.0 5.0
4. Audio Freq. Response (-10dB 1kHz IN) 200 Hz (R/P, SP) dB -2.0 -2.0±5.0
8 kHz (R/P, SP) dB 0 6.0
Description Condition Unit Nominal Limit
1. Output Level (-10dB 1kHz IN) (R/P, SP) dB -8.0 -8±4
2. Audio Distortion (-10dB 1kHz IN) (R/P, SP) % 0.5 1.0
3. Freq. Response (-15dB 1kHz IN) 20 Hz (R/P, SP) dB 0 ±4
20 kHz (R/P, SP) dB 0 ±4
1-2-1 TD857PFS
PREPARATION FOR SERVICING
How to Enter the Service Mode
Caution: 1
1. Optical sensors system are used for Tape Start and
End Sensor on this equipment. Read this page
carefully and prepare as described on this page
before starting to service; otherwise, the unit may
operate unexpectedly.
Preparing: 1
1. Cover Q202 (START SENSOR) and Q201 (END
SENSOR) with Insulation Tape or enter the service
mode to activate Sensor Inhibition automatically.
Note: Avoid playing, rewinding or fast forwarding the
tape to its beginning or end, because both Tape End
Sensors are not active.
How to Enter the Service Mode
1. Turn power on.
2. Use service remote control unit and press DISC
MENU key. (See page 1-4-1)
3. When entering the service mode, one of the num-
ber (1, 2 or 4) will display at corners of the screen.
4. During the service mode, electrical adjustment
mode can be selected by remote control key. (Ser-
vice remote control unit).
Details are as follows.
Caution: 2
1. The deck mechanism assembly is mounted on the
Main CBA directly, and SW1211 (REC-SAFETY
SW) is mounted on the Main CBA. When deck
mechanism assembly is removed from the Main
CBA due to servicing, this switch can not be oper-
ated automatically.
Preparing: 2
1. To eject the tape, press the STOP/EJECT button
on the unit (or Remote Control).
2. When you want to record during the Service mode,
press the Rec button while depressing SW1211
(REC-SAFETY SW) on the Main CBA.
Key Adjustment Mode
MENU
Picture adjustment mode: Press the
MENU button to change from BRT
(Bright), *CNT (Contrast),
*COL(Color), *TNT(Tint) and *V-T.
Press CH UP/DOWN key to adjust Ini-
tial Value. *Marked items are not nec-
essary to adjust normally.
0No need to use.
1No need to use.
2H adjustment mode: See adjustment
instructions page 1-4-2.
3No need to use.
4
Auto record mode: Perform recording
(15 Sec.)-->Stop-->Rewind (Zero
return) automatically.
5
Head switching point adjustment
mode: See adjustment instructions
page 1-4-5.
6No need to use.
7
Purity check mode: Shows Red,
Green, Blue or White cyclically on the
screen each time the “7” key is
pressed.
Key Adjustment Mode
8H. Shift adjustment mode: See adjust-
ment instructions page 1-4-3.
9
V.size/V. shift adjustment: See adjust-
ment instructions pages 1-4-2 and
1-4-3.
VOL pCut-off Adjustment 1-4-3.
(START SENSOR)
(END SENSOR)
(REC-SAFETY SW)
MAIN CBA
Q201
SW1211
Q202
1-3-1 TD857DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
Caution !
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
2. Disassembly Method
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order.These numbers
are also used as the Identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or
Desolder
2(S-2) = two Screw (S-2)
(5): Refer to the following "Reference Notes in the
Table."
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
[1] Rear
Cabinet 1, 2 6(S-1), 1(S-2), 1(S-3) -
[2]
H.V. CBA
(With
Holder)
3, 4,
6
Anode Cap, CN501,
CRT CBA, CN571,
CN1301, CN2602
1
[3]
Tray
Chassis
Unit
3, 6 CN1802, CN2801,
CN2601 -
[4] CRT 4 4(S-4) -
[5] Shield Box 3 5(S-5) -
[6] DVD
Mechanism 3, 6 CN2401, CN2402,
3(S-6) -
[1] Rear Cabinet
[2] H.V. CBA (with Holder)
[3] Tray Chassis Unit
[5] Shield Box
[4] CRT
[6] DVD Mechanism
[10] Deck Assembly
[11] Main CBA
[7] DVD Main
CBA Unit
[9] Function CBA
[8] Power Supply/AV CBA
[7] DVD Main
CBA Unit 5 2(S-7), CN201,
CN301
2-1
2-2
2-3
3
[8]
Power
Supply/AV
CBA
3, 6 4(S-8), CN2803,
CN2804 -
[9] Function
CBA 3 3(S-9) -
[10] Deck
Assembly 3, 6
7(S-10), 2(S-11),
CL1201, CL1401,
CL1402, CL1403
4
[11] Main CBA 3 3(S-12) -
(1)
(2)
(3)
(4)
(5)
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
1-3-2 TD857DC
Reference Notes in the Table
Caution !
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
Reference Notes in the Table
CAUTION 1: Discharge the Anode Lead of the CRT
with the CRT Ground Wire before removing the Anode
Cap.
1. Disconnect the following: Anode Cap, CN501, CRT
CBA, CN571, CN2602, and CN1301.
Then remove H.V. CBA (with Holder).
CAUTION 2: Electrostatic breakdown of the laser
diode in the optical system block may occur as a
potential difference caused by electrostatic charge
accumulated on cloth, human body etc., during
unpacking or repair work.
To avoid damage of pickup follow these procedures.
2-1. Slide out the pickup unit as shown in Fig. 5.
2-2. Short the three short lands of FPC cable with sol-
der before removing the FFC cable (CN201) from
it. If you disconnect the FFC cable (CN201), the
laser diode of pickup will be destroyed. (Fig. 5)
2-3. Disconnect connector (CN301). Remove two
screws (S-7) and lift the DVD Main CBA Unit.
(Fig. 5)
CAUTION 3: When reassembling, confirm the FFC
cable (CN201) is connected completely. Then remove
the solder from the three short lands of FPC cable.
(Fig. 5)
4. Remove screws 7(S-10) and 2(S-11). Then, desol-
der connectors (CL1201, C1401, CL1402, CL1403)
and lift up the Deck Assembly.
1-3-3 TD857DC
Fig. 1
S-1
S-1
S-1
S-1
S-1
S-3
[1] REAR CABINET
S-2
Fig. 2
S-1
S-1
S-2
S-3
S-1
S-1
S-1
S-1
[1] REAR CABINET
1-3-4 TD857DC
Fig. 3
S-5
S-5
S-5
[5] Shield Box
[2] H.V. CBA
(wih Holder)
H.V. CBA
[6] DVD
Mechanism
[11] Main
CBA
[8] Power
Supply/
AV CBA
[9] Function
CBA
S-6
S-6
S-6
S-8
S-9
S-9
S-8
S-8
[10] Deck
Assembly
S-10
S-10
S-10
S-12
S-11
S-11
[3] Tray Chassis Unit
1-3-5 TD857DC
Fig. 4
S-4
S-4
S-4
S-4
[4] CRT
Anode Cap
CRT CBA
Fig. 5
A
View for A
Pickup Unit
BShort the three short
lands by soldering
View for B
Slide
S-7
CN201
[7] DVD Main
CBA Unit
DVD Mechanism
S-7
CN301
1-3-6 TD857DC
Fig. 6
FUNCTION CBA
AC CORD
CL504A
CL501
SCREEN
CN501
FOCUS
ANODE
CRT
GND
CN601 CN401
FACTORY USE
ONLY
DVD MAIN CBA
FE HEAD
CYLINDER
ASSEMBLY
AC HEAD
ASSEMBLY
CAPSTAN
MOTOR
DECK ASSEMBLY
CN571
CL502A
CL503A
CL501A
H.V. CBA
TUNER
CN1802 CL1201 CN1301
CN1803
CN1804
CN1805
CL1402
CL1401
CL1403
MAIN CBA
CN2602
CN2401
CN2402
CN2804
CN2803
CN2601
POWER SUPPLY/
AV CBA
CN2805
CN2801
CRT CBA
TO SPEAKER
TO SPEAKER
1-4-1 TD857EA
ELECTRICAL ADJUSTMENT INSTRUCTIONS
General Note:
"CBA" is abbreviation for "Circuit Board
Assembly."
NOTE:
Electrical adjustments are required after replacing
circuit components and certain mechanical parts.
It is important to perform these adjustments only
after all repairs and replacements have been com-
pleted.
Also, do not attempt these adjustments unless the
proper equipment is available.
Test Equipment Required
1. NTSC Pattern Generator (Color Bar W/White Win-
dow, Red Color, Dot Pattern, Gray Scale, Mono-
scope, Multi-Burst)
2. AC Milli Voltmeter (RMS)
3. Alignment Tape (VFMS0001H6), Blank Tape
4. DC Voltmeter
5. Oscilloscope: Dual-trace with 10:1 probe,
V-Range: 0.001~50V/Div,
F-Range: DC~AC-60MHz
6. Frequency Counter
7. Plastic Tip Driver
8. Color Analyzer
How to make service remote control
unit:
1. Prepare remote control unit (ID No. NE206UD, Part
No. 4835 218 37345). Remove 4 screws from the
back lid (Fig. 1-1).
2. Cut off pin 10 of the remote control microprocessor
and short circuit pins 10 and 17 of the microproces-
sor with a jumper wire.
How to Set Up the Service Mode:
1. Turn the power on. (Use main power on the TV
unit.)
2. To enter the TV mode, press "CH o" or "CH p"
button on the TV unit.
3. Press "DISC MENU" button on the service remote
control unit. (Version of micro computer will display
on the CRT. (Ex: 057-001)
X-Ray Protection Test
X-Ray protection test should be done when replacing
any parts of this chassis.
1. Short test points J551 and J552 (on H.V. CBA).
2. Confirm that the main power turns off.
3. If the main power does not turn off, then replace
the following parts (D591, Q591, R592, R593,
R594 and IC1201).
4. Perform steps 1 to 3 again.
1. DC 114V (+B) Adjustment
Purpose: To obtain correct operation.
Symptom of Misadjustment: The picture is dark and
unit does not operate correctly.
Notes: J553(+B), HEAT SINK --- H.V. CBA
VR2601 --- Power Supply/AV CBA
1. Connect the unit to AC power outlet.
2. Connect DC Volt Meter to J553(+B) and HEAT
SINK (on H.V. CBA) (GND).
3. Adjust VR2601 so that the voltage of J553(+B)
becomes +114±0.5V DC.
SCREW
Fig. 1-1
Remote control unit (Bottom)
Test Point Adj. Point
J553(+B)
HEAT SINK (on H.V. CBA)
(GND) VR2601
M. EQ. Spec.
DC Voltmeter +114±0.5V DC
1-4-2 TD857EA
2. H Adjustment
Purpose: To get correct horizontal position and size of
screen image.
Symptom of Misadjustment: Horizontal position and
size of screen image may not be properly displayed.
Note: R583 --- H.V. CBA
1. Connect frequency counter to R583.
2. Operate the unit for at least 20 minutes.
3. Enter the Service mode. (See page 1-4-1.) Press
"2" button on the service remote control unit and
select H-ADJ mode.
4. Press "CH o / p" buttons on the service remote
control unit so that the display will change "0" to
"7." At this moment, choose display "0" to "7" when
the frequency counter display is closest to
15.734kHz±300Hz.
5. Turn the power off and on again.
3. C-Trap Adjustment
Purpose: To get minimum leakage of the color signal
carrier.
Symptom of Misadjustment: If C-Trap Adjustment is
incorrect, stripes will appear on the screen.
Note: D1304 (Cathode) (B-Out)--- Main CBA
1. Connect Oscilloscope to D1304 (Cathode).
2. Input a color bar signal from RF input.
Enter the Service mode. (See page 1-4-1.)
3. Press "0" button on the service remote control unit
and select C-TRAP Mode.
4. Press CH o / p buttons on the service remote
control unit so that the carrier leakage B-Out
(3.58MHz) value becomes minimum on the oscillo-
scope.
5. Turn the power off and on again.
4. V. Size Adjustment
Purpose: To obtain correct vertical height of screen
image.
Symptom of Misadjustment: If V. Size is incorrect,
vertical height of image on the screen may not be
properly displayed.
1. Enter the Service mode. (See page 1-4-1.)
Press "9" button on the service remote control unit
and select V-S mode. (Press "9" button then dis-
play will change to V-P and V-S).
2. Input monoscope pattern.
3. Press "CH o / p" buttons on the service remote
control unit so that the monoscope pattern is
90±5% of display size and the circle is round.
Test Point Adj. Point Mode
R583 CH o / p buttons Video
M. EQ. Spec.
Frequency Counter 15.734kHz±300Hz
Test Point Adj. Point Input
D1304
(Cathode)
(B-OUT)
CH o / p
buttons Color Bar
M. EQ.
Oscilloscope,
Pattern Generator
Figure
minimum
Fig. 2
Adj. Point Input
CH o / p buttons Monoscope
M. EQ. Spec.
Pattern Generator 90±5%
1-4-3 TD857EA
5. V. Shift Adjustment
Purpose: To obtain correct vertical position of screen
image.
Symptom of Misadjustment: If V. shift is incorrect,
vertical position of image on the screen may not be
properly displayed.
1. Enter the Service mode. (See page 1-4-1.)
Press "9" button on the service remote control unit
and select V-P mode. (Press "9" button then dis-
play will change to V-P and V-S).
2. Input monoscope pattern.
3. Press "CH o / p" buttons on the service remote
control unit so that the top and bottom of the mono-
scope pattern are equal to each other.
6. H. Shift Adjustment
Purpose: To obtain correct horizontal position and
size of screen image.
Symptom of Misadjustment: Horizontal position and
size of screen image may not be properly displayed.
1. Enter the Service mode. (See page 1-4-1.)
Press "8" button on the service remote control unit
and select H-P mode.
2. Input monoscope pattern.
3. Press "CH o / p" buttons on the service remote
control unit so that the left and right side of the
monoscope pattern are equal to each other.
4. Turn the power off and on again.
7. Cut-off Adjustment
Purpose: To adjust the beam current of R, G, B, and
screen voltage.
Symptom of Misadjustment: White color may be
reddish, greenish or bluish.
Notes: Screen Control FBT --- H.V. CBA
FBT= Fly Back Transformer
Use the service remote control unit
1. Degauss the CRT and allow CRT to operate for 20
minutes before starting the alignment.
2. Input the Black raster signal from EXT. input.
3. Enter the Service mode. (See page 1-4-1.)
4. Press the "VOL p" button.
(Press "VOL p" then display will change CUT OFF/
DRIVE, 7Fh adjustment and DVD-KEY).
5. Choose CUT OFF/DRIVE mode then press "1" but-
ton. This adjustment mode is CUT OFF (R).
6. Increase the screen control so that the horizontal
line just appears on the CRT.
7. Press the "CH o / p" button until the horizontal line
becomes white.
8. Choose CUT OFF/DRIVE mode then press "2" but-
ton. This adjustment mode is CUT OFF (G). Press
"CH o / p" until the horizontal line becomes white.
9. Choose CUT OFF/DRIVE mode then press "3" but-
ton. This adjustment mode is CUT OFF (B). Press
"CH o / p" until the horizontal line becomes white.
10.Choose CUT OFF/DRIVE mode then press "4" but-
ton.
11.Input the White Raster Signal from Video In.
Adj. Point Input
CH o / p buttons Monoscope
M. EQ.
Pattern Generator
Adj. Point Input
CH o / p buttons Monoscope
M. EQ.
Pattern Generator
Adj. Point Mode Input
Screen-Control Ext. Black Raster /
White Raster
M. EQ. Spec.
Pattern Generator
Color Analyzer See Reference
Notes below
Figure
PATTERN
GENERATOR
EXT. INPUT
Color Analyzer Fig. 3
1-4-4 TD857EA
12.Set the color analyzer to the CHROMA mode and
after zero point calibration, bring the optical recep-
tor to the center on the tube surface (CRT).
13.Adjust the RED DRIVE as needed with the CH o /
p buttons to get the following value, X= 286, Y=
294.
14.Choose CUT OFF/DRIVE mode then press "5."
Adjust the BLUE DRIVE as needed with the CH o /
p buttons to get the following value, X= 286.
15.Turn the power off and on again.
8. Sub-Brightness Adjustment
Purpose: To get proper brightness.
Symptom of Misadjustment: If Sub-Brightness is
incorrect, proper brightness cannot be obtained by
adjusting the Brightness Control.
Note: SMPTE Setup level --- 7.5 IRE
1. Enter the Service mode. (See page 1-4-1.)
Then input SMPTE signal from RF input.
2. Press "PICTURE" button. (Press "PICTURE" but-
ton then display will change B R T, C N T, COL, T N
T and V-T ). Select BRT and press "CH o / p" but-
tons so that the bar is just visible (See above fig-
ure).
3. Turn the power off and on again.
9. Focus Adjustment
Purpose: Set the optimum Focus.
Symptom of Misadjustment: If Focus Adjustment is
incorrect, blurred images are shown on the display.
Notes: Focus VR (FBT) --- H.V. CBA
FBT= Fly Back Transformer
1. Operate the unit more than 30 minutes.
2. Face the unit to the East and degauss the CRT
using a degaussing coil.
3. Input the monoscope pattern.
4. Adjust the Focus Control on the FBT to obtain a
clear picture.
10. SIF Adjustment
Purpose: To set the SIF (Sound Intermediate Fre-
quency).
Symptom of Misadjustment: Audio may not sound
correctly.
Note: This adjustment automatically done by the
chrominance IC (IC1301).
11. CCS Text Box Location
Note: This adjustment automatically done by the
microcomputer.
Adj. Point Input
CH o / p
buttons SMPTE 7.5IRE
M. EQ. Spec.
Pattern Generator See below
Figure
Black
White
This bar
just
visible
Fig. 4
Adj. Point Input
Focus Control Monoscope
M. EQ. Spec.
Pattern Generator See below.
1-4-5 TD857EA
12. Head Switching Position Adjustment
Purpose: Determine the Head Switching Point during
Playback.
Symptom of Misadjustment: May cause Head
Switching Noise or Vertical Jitter in the picture.
Note: Unit reads Head Switching Position automati-
cally and displays it on the screen (Upper Left Corner).
1. Playback test tape (VFMS0001H6).
2. Enter the Service mode. (See page 1-4-1.)
Then press the "5" button on the service remote
control unit.
3. The Head Switching position will display on the
screen; if adjustment is necessary follow step 4.
6.5H(412.7µs) is preferable.
4. Press "CH o" or "CH p" button on the service
remote control unit if necessary. The value will be
changed in 0.5H steps up or down. Adjustable
range is up to 9.5H. If the value is beyond adjust-
able range, the display will change as:
Lower out of range: 0.0H
Upper out of range: -.-H
5. Turn the power off and on again.
The following 2 adjustments normally are not
attempted in the field. They should be done
only when replacing the CRT, then adjust as a
preparation.
13. Purity Adjustment
Purpose: To obtain pure color.
Symptom of Misadjustment: If Color Purity Adjust-
ment is incorrect, large areas of color may not be
properly displayed.
1. Set the unit facing East.
2. Operate the unit for over 30 minutes before adjust-
ing.
3. Fully degauss the unit using an external degauss-
ing coil.
4. Set the unit to the AUX mode, which is located
before CH2, then input a red raster from video in.
5. Loosen the screw on the Deflection Yoke Clamper
and pull the Deflection Yoke back away from the
screen. (See Fig. 6.)
6. Loosen the Ring Lock and adjust the Purity Mag-
nets so that a red field is obtained at the center of
the screen. Tighten Ring Lock. (See Fig. 5,6.)
7. Slowly push the Deflection Yoke toward the bell of
the CRT and set it where a uniform red field is
obtained.
8. Tighten the clamp screw on the Deflection Yoke.
Adj. Point Input
Deflection Yoke Purity Magnet Red Color
M. EQ. Spec.
Pattern Generator See below.
Figure
BLUE
GREEN RED
Fig. 5
1-4-6 TD857EA
14. Convergence Adjustment
Purpose: To obtain proper convergence of red, green
and blue beams.
Symptom of Misadjustment: If Convergence Adjust-
ment is incorrect, the edge of white letters may have
color edges.
1. Set the unit to the AUX mode which is located
before CH2, then input a dot or crosshatch pattern.
2. Loosen the Ring Lock and align red with blue dots
or crosshatch at the center of the screen by rotat-
ing (RB) C.P. Magnets. (See Fig. 7.)
3. Align red / blue with green dots at the center of the
screen by rotating (RB-G) C.P. Magnet.
(See Fig. 8.)
4. Fix the C.P. Magnets by tightening the Ring Lock.
5. Remove the DY Wedges and slightly tilt the Deflec-
tion Yoke horizontally and vertically to obtain the
best overall convergence.
6. Fix the Deflection Yoke by carefully inserting the
DY Wedges between CRT and Deflection Yoke.
Adj. Point Input
C.P. Magnet (RB),
C.P. Magnet (RB-G),
Deflection Yoke
Dot Pattern or
Crosshatch
M. EQ. Spec.
Pattern Generator See below.
Figure
DY WEDGE
DEFLECTION YOKE
C.P. MAGNET
RING LOCK
SCREW
SCREW
RB-G
RB
PURITY
CRT
COIL
COIL CLAMPER
C.P. MAGNET
CLAMPER
Fig. 6
Fig. 7
Fig. 8
B
G
RR
G
B
C.P. MAGNET (RB)
RB
G
RB
G
C.P. MAGNET (RB-G)
1-4-7 TD857EA
Adjustment Points and Test Points
H.V. CBA
R583
H ADJ.
J553
+B
UPPER
FOCUS VR
LOWER
SCREEN VR
Power Supply/AV CBA
VR2601
+B ADJ
CONTROL
HEAD
CL1402
AC HEAD ASSEMBLY
MAIN CBA
POWER SUPPLY / AV CBA
RF-SW
T-REEL
DV-SYNC
C-SYNC C-SYNC
V-ENV
CTL(+)
D1224 S-LED
D1204 REC
D1216 DVD
D1217
TV/VCR
Q1210
Q1211
Q1207
P-ON+5V
REC-LED
KEY0
RS1201
REMOTE
SENSOR
KEY1
DVD-H
TV/VCR-LED
RESET
ROTA
D-REC-H D-REC-H
REC-SAFETY
A-MUTE
SCL
REMOTE
SDA
A-MUTE
CTL(-)
RF-SW
DV-SYNC
V-ENV
ROTA
IC1201
(SERVO/SYSTEM CONTROL)
AL+5V
AL+5V
94
95
80
34
18
15
10
13
74
33
8
44
65
72
CTL-AMP-OUT
DVD-REMOTE
97
CTL-AMP-OUT
TP1201
(DECK ASSEMBLY)
Servo/System Control Block Diagram
BLOCK DIAGRAMS <TV/VCR Section>
T-REEL
Q1206
Q1205
RESET
TIMER+5V
ST/SAP-MODE
4NORMAL-H
22
28
EXT-H 29
RENTAL 30
SPL-PLAY
SP/LP/SLP
EXT-H
RENTAL
SPL-PLAY
32
REC/EE/PB REC/EE/PB
27
VOL-CONT VOL-CONT
11 EXT-H
A-MUTE
JACK-MUTE JACK-MUTE
DVD-MAIN-POWER
67
SW1211
REC
SAFETY
FROM/TO
VIDEO BLOCK
FROM/TO
AUDIO BLOCK
FROM/TO
Hi-Fi AUDIO
BLOCK
1-5-1 1-5-2 TD857BLS
SCL
(MEMORY)
SDA
6
5
P-DOWN 84
P-ON-H P-DOWN
P-ON-H
31
LD-SW1
I2C-OPEN 45
71
AL+5V
SW1212
LD-SW
CS7
FROM/TO
POWER
SUPPLY BLOCK
SDA
SCL FROM/TO
CHROMA
BLOCK
IC1202
WF3
ENV-DET 17
V-H-SW ENV-DET
V-H-SW
16
SDA
SCL
Hi-Fi-H-SW
ST/SAP-IN
NORMAL-H
DVD-MAIN-POWER
Hi-Fi-H-SW
19
26
48
21
DVD-H
DVD-A-MUTE
42
5
KEY SWITCH
SW1201 SW1203,
SW1206 SW1210
5 5KEY1
CN2805
CN2803
CN1805
KEY SWITCH
SW2401 SW2408
14
25
12SDATA
1220 SDATA
FROM/TO
DVD SYSTEM
CONTROL
/SERVO BLOCK
<DVD SECTION>
CN401
CN2402
6
CN1804
13SCLK
14CS
15
DVD-REMOTE
M
1P-ON+12V
5C-CONT
6
FG-GND
7LD-CONT
CAPSTAN
MOTOR
CAPSTAN MOTOR
P-ON+5V
D/L+15V
P-ON+12V
10M-GND
11D/L+12V
9D-PFG
12D/L+15V
END-SENS.
Q201
SENSOR CBA
(END-SENSOR)
ST-SENS.
Q202
SENSOR CBA
(ST-SENSOR)
21 SCLK
18 CS
22
DVD-REMOTE
52
51
50
SDATA
SCLK
CS
69
DVD-A-MUTE
5CTL(+)
6CTL(-)
8D-CONT
4
C-F/R
3C-FG
2P-ON+5V(3)
66
87
76
82
77
90
C-F/R
C-FG
C-CONT
LD-CONT
D-CONT
D-PFG
CL1201
M
LOADING
MOTOR
CYLINDER ASSEMBLY
M
DRUM
MOTOR
PG
SENSOR
9
7
ST-SENS.
END-SENS.
13
14
15
AFT
AFT
D-REC-H
SP/LP/SLP
FUNCTION CBA
Q2621
Q2622
Q2623
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
Video Block Diagram
1-5-3 1-5-4 TD857BLV
REC VIDEO SIGNAL PB VIDEO SIGNAL MODE: SP/REC
LUMINANCE
SIGNAL PROCESS
MAIN CBA
CL1401
Q1401
TP1402
V-OUT
V-AGC
R P
FBC
Y/C
MIX
CCD 1H
DELAY
R
P
DOC YNR Y/C COMB
CHROMINANCE
SIGNAL PROCESS
IC1401
VIDEO/AUDIO
SIGNAL PROCESS 35
42
38
17
CHARA
MIX
6dB
AMP
VXO
ENV
DET
AGC
AMP
HPF
FROM
SERVO/SYSTEM
CONTROL BLOCK
RF-SW
TP1401
WF1
TP1403
HA-MONITOR
BUFFER
DV-SYNC
SP/LP/SLP
ROTA
DV-SYNC
ROTA
14
36
16
71
39
59
73
SPL-PLAY
REC/EE/PB
RENTAL
SPL-PLAY
REC/EE/PB
RENTAL
42
EXT-H
74
45 47 49 44
Q1402
WF6
WF5
WF4
WF2
L
R
VIDEO (R)-1 HEAD
VIDEO (L)-1 HEAD
(DECK ASSEMBLY)
V(R)-1
V-COM
V(L)-1
9
8
7
V(L)-2
V-COM
V(R)-2
6
5
4
13
88
89
90
91
FROM/TO
SERVO/SYSTEM
CONTROL BLOCK
CYLINDER ASSEMBLY
R
L
RF-SW
93
V-ENV
V-H-SW
ENV-DET ENV-DET
VIDEO (L)-2 HEAD
VIDEO (R)-2 HEAD
15
94
82
83
84
85
SP
EP
TO
CHROMA
BLOCK
62 61
X1401
3.58MHz
VIDEO
V-OUT
TV-
EXT-V-IN
VIDEO
TU1001
(TUNER UNIT)
JK1701
VIDEO-IN
SP/LP/SLP
BUFFER
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
Audio Block Diagram
BLOCK DIAGRAM FOR SECTION 2 (DECK MECHANISM)
MAIN CBA
POWER SUPPLY / AV CBA
PB-AUDIO SIGNAL DVD AUDIO SIGNAL
REC-AUDIO SIGNAL
1-5-5
IC1401
TD857BLA1-5-6
BIAS
OSC
Q1872
P-ON+5V
P-ON+5V
Q1871
Q1873
Q1874
Q1875
(AUDIO PROCESS)
N-A-IN
N-A-OUT TP1802
NA-IN-YCA
AUDIO
HEAD
AC HEAD ASSEMBLY
A-COM
A-PB/REC
CL1402
CN1804CN2803
AUDIO
ERASE
HEAD
AE-H
AE-H/FE-H
1
2
FE-H
FE-H GND
FULL
ERASE
HEAD
CN1403
4
3
1
2
FE HEAD UNIT
REC
AMP
798
6
AUTO
BIAS
99
LINE
AMP MUTE 96
P
R
ALC
7112
D-REC-H
D-REC-H
EXT-H
A-MUTE
EXT-H FROM SERVO/SYSTEM
CONTROL BLOCK
4
78
11
WF7
WF8
FROM/TO SERVO/SYSTEM
CONTROL BLOCK
3
1
EQ
AMP
100
SP/LP-ON
2
IC1802
(OUTPUT SELECT)
IC2201
(OP AMP)
JK1801
HEADPHONE
JACK
SPEAKER
R-CH
CN1802
CN1805
SP1802
FROM/TO
Hi-Fi AUDIO
BLOCK
FROM DVD
AUDIO BLOCK
<DVD SECITON>
CN601
FROM
Hi-Fi AUDIO
BLOCK
SW CTL.
Q2204 Q1803
CN2401
Q2202
JK2201
DIGITAL
A-OUT
(COXIAL)
A-OUT(L)
A-OUT(R)
A-OUT(R)
A-OUT(L)
2
1
12
13 14
15
1110
6
2 1
7
Q2205
BUFFER
IC1801
(AUDIO AMP)
DC VOL.
5
2 12
7
6
Q2207
76
80
7
DVD-A-MUTE
1 SPDIF
4 DVD-A(R)
6 DVD-A(L)
8 8DVD-A(R)
7 7DVD-A(L)
11 11JACK-MUTE
10 10
DVD-A-MUTE
5 5
JACK-OUT(R)
4 4
JACK-OUT(L)
FUNCTION CBA
SPEAKER
L-CH
CN2801CN2805
SP2801
SP-R 1
SP-GND 2
SP-L 1
SP-GND 2
2 2SP-L
DVD-A-MUTE
CL1802
CL2801
FROM SERVO/SYSTEM
CONTROL BLOCK
VOL-CONT
Q1212
DVD-H
JACK-MUTE
AL+5V
WF19
WF20
DATA(AUDIO) SIGNAL
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
57
7
48 47
13 14
69
6
7
R-CH
INSEL
L-CH
INSEL
NOR
SW
SERIAL
DATA
DECODER
OUTPUT
SELECT
VCO LPF
L-CH BPF
R-CH
PNR
PILOT
DET
CONT
STEREO
PLL
STEREO
FILTER
SAP
FILTER
SAP
DET
SIF
DEMOD
SAP
DEMOD L-R
DEMOD
ST/SAP
SW MATRIX
L-CH
PNR
LIM DEV
COMP
SW
NOISE
VCO LPF
LIM DEV
COMP
COMP
DC
SW
NOISE
dBX
DEC
ENV
DET
MODE
OUT
RIPPLE
FILTER
DO
DET
MATRIX
R-CH BPF
P
R
R
L
P
R
HOLD
PULSE
NOISE
DET
34 33
23
4
80
78
37
38
54
77
1
39
26
24
27
N-A-OUT
LIM
49
A-OUT (L)
A-OUT (R)
N-A-IN
Hi-Fi-H-SW
A-MUTE
NORMAL-H
40 ST/SAP-MODE
FROM/TO AUDIO
BLOCK
SCL
P-ON+9V
TO SERVO/SYSTEM
CONTROL BLOCK
Hi-Fi
AUDIO
(R) HEAD
Hi-Fi
AUDIO
(L) HEAD
CYLINDER
ASSEMBLY
MAIN CBA
Hi-Fi-A(R) 3
Hi-Fi-COM 2
Hi-Fi-A(L) 1
CL1401
IC1751(MTS/ SAP/ Hi-Fi AUDIO PROCESS/ Hi-Fi HEAD AMP)
Hi-Fi Audio Block Diagram
TD857BLH1-5-7 1-5-8
REC-AUDIO SIGNALPB-AUDIO SIGNAL
PILOT
CANCEL
TO
AUDIO BLOCK
FROM/TO
SERVO/ SYSTEM
CONTROL BLOCK
FROM
SERVO/SYSTEM
CONTROL BLOCK
62 63
JK1702
AUDIO-IN(L)
JK1703
AUDIO-IN(R)
BUFFER
Q1010
SIF
TU1001
(TUNER UNIT)
Q1701
TP1701 TP1702
SDA
Hi-Fi-L Hi-Fi-R
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
TD857BLC
X1301
3.58MHz
CN1301
IC1301
(VIDEO/AUDIO/CHROMA/DEFLECTION)
SDA
SCL
FSC
10
9
13
16
IC1201 (OSD)
V-SYNC
H-SYNC
OSD-R
OSD-G
OSD-B
59
58
60
62
63
64
OSD-BLK
EXT-V-IN
FROM
VIDEO BLOCK
V-OUT
FROM/TO
CRT/H.V. BLOCK
CN503
12
GREEN11
BLUE
FBP3
H-DRIVE4
ACL/ABL
V-DRIVE8
V-RAMP-FB
Chroma Block Diagram
SDA
AFT
SCL
FROM/TO
SERVO/
SYSTEM
CONTROL
BLOCK
REC VIDEO SIGNAL PB VIDEO SIGNAL DVD VIDEO SIGNAL
WF16
WF15 WF9
56
CV-IN
10
18
28
29
34
35
8
9
31
13
10
11
12
15
14
4
5
3
2
40
41
16
6
20
25
23
CHROMA
TRAP
SERIAL
I/F
INTELLIGENT
MONITORING
CHROMA
BPF
SYNC
SEPARATION
LUMA
SIGNAL
PROCESS
CIRCUIT
CHROMA
SIGNAL
PROCESS
CIRCUIT
H-SYNC
PROCESS
CIRCUIT
V-SYNC
PROCESS
CIRCUIT
OSD MIX/RBG MATRIX/
BLIGHT/DRIVE AMP/
HV BLANKING
TUNER
TUNER
FILTER
TUNING VXCO
C-SYNC
LINE
VCR
VCR
LINE
RED
AFT
TU1001
(TUNER UNIT)
1-5-9
SWCTL
IC1802
(OUTPUT SELECT)
Q1806
D-REC-H
S-C
S-Y
DVD-Y12
DVD-C10
BUFFER
BUFFER
CN1803 CN2804 Q2210
Q2211
CN2401
DVD-C
TP2204
DVD-Y
TP2203
POWER SUPPLY/AV CBA
TV-VIDEO
7
5
FROM DIGITAL
SIGNAL PROCESS
BLOCK
<DVD SECTION>
CN601
1-5-10
5
3
9
4
VCR
DVD
MAIN CBA
WF17
WF18
+5.7V
REG. 27 +5V CTRL TO POWER
SUPPLY BLOCK
30
+8V
14 14DVD-Y
15 15DVD-C
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
PULSE
UP
AMP
THERMAL
PROTECTION
3
6
7
15
V-DRIVE
8
H-DRIVE
4
8
10
7
9
6
GREEN AMP
BLUE AMP
Q501 Q502
Q503
H.DRIVE
Q572
Q571 T572
TD857BLCRT
FBP
ACL/ABL
CRT/H.V. Block Diagram
V-
DRIVE
H-
DRIVE
D.Y.
L551
IC551 (V-DEFLECTION CONTROL)
T571 F.B.T.
ANODE
FOCUS
SCREEN
3
5
CL503A
7
H.V. CBA
CRT CBA
CL504A
R
G
B
HEATER
ANODE
GND
V501
CRT
GND
FOCUS
SCREEN
JK501
HEATER 11
CN501
CL501BCL501A
REC VIDEO SIGNAL PB VIDEO SIGNAL
CN571
+180V 33
11
S
F
HV
FOCUS VR
SCREEN VR
1-5-121-5-11
+B5
CL502A
2
3
4 RED
GREEN
BLUE
6+B
3DEF+B
H.OUTPUT
V-RAMP-FB
1
3
5
4
5
4
3
1
WF13WF12
WF14
WF10
WF11
RED AMP
J553
+B
J563
GND
5
FROM
POWER
SUPPLY
BLOCK
CN2602
CN502 CL502B
CN503 CL503B
CN503 CL504B
JUNCTION-B
CBA
JUNCTION-A
CBA
3
7
4
8
2
3
4
5
6
3
V-DRIVE
8
H-DRIVE
4
FBP
ACL/ABL
3
5
7
RED
12
GREEN
11
BLUE
10
V-RAMP-FB
FROM
CHROMA
BLOCK
CN1301
5 +B
6 +B
3 DEF+B
DVD VIDEO SIGNAL
FROM/TO
CHROMA
BLOCK
CN1301
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
TEST POINT INFORMATION
:INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB.
:USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE.
:USED TO INDICATE A TEST POINT WITH NO TEST PIN.
:USED TO INDICATE A TEST POINT WITH A TEST PIN.
Power Supply Block Diagram
LINE
FILTER
BRIDGE
RECTIFIER
T2601
IC2601
ERROR
VOLTAGE DET
W2601 F2601
4A/125V L2601 D2603 D2606
TD857BLP
DEGAUSSING
COIL
CN2601
PS2601
HOT COLD
1-5-141-5-13
POWER SUPPLY/AV CBA
MAIN CBA
DVD MAIN CBA UNIT
NOTE :
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
CAUTION !
Fixed voltage power supply circuit is used in this unit.
If Main Fuse (F2601) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
4A 125V
SWITCHING
Q2601
IC1602
P-DOWN
(TO PIN84 OF IC1201)
Q2604
IC2603
IC2604
VR2601
Q2602
+5V REG.
+B ADJ
5 +B
6 +B
3 DEF+B
Q1608
SW+5V
Q1611
SW+5V
Q1613
SW+5V
P-ON+5V
P-ON+5V
P-ON+5V
T+5V
P-ON+9V
P-ON+12V
AL+5V
P-ON+12V
Q1612
AL+33V
D/L+15V
P-ON+5V
+5V-CTRL
P-ON-H
(FROM PIN31 OF IC1201)
DVD-MAIN-POWER
(FROM PIN42 OF IC1201)
CN2602 TO CN502
TO
CRT/H.V.
BLOCK
CN2804 CN1803
CN2803 CN1804
CN2402 CN401
DVD-ON+3.3V
1
23
4
13 13DVD-ON+5V
16 16
DVD-MAIN-POWER
9 9P-ON-H
2 2P-ON+9V(3)
19 19AC-DOWN
19 19D/L+15V
4 4P-ON+9V(1)
10 10P-ON+12V
18 18P-ON+12V
9 9AL+33V
8 8AL+5.7V
6 6P-ON+9V(2)
3 3EV+1.5V
2 2EV+1.5V
1 1EV+1.5V
4 4EV+3.3V
5 5EV+3.3V
17 17DVD-ON+3.3V
14 14AL+9V
15 15AL+9V
19 19PWRCON
DVD-ON+5V
EV+3.3V
EV+1.5V
AL+9V
12
16
15
14
11
13
10
92
3
5
7
FEED
BACK
+3.3V
REG.
REG.
Q2606
Q2614
Q2607
Q2613
Q2609
Q2605
Q2615
Q2617
1 2
4
IC2602
+1.5V
REG.
1 2
4
Q2611
Q2610
Q2612
Q2608
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE 4 A, 125V FUSE.
CAUTION:
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE 4A, 125V.
4A 125V
FROM CHROMA
BLOCK
P-ON+9V
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
PWRCON
FROM DVD SYSTEM
CONTROL
/SERVO BLOCK
<DVD SECTION>
DVD System Control/Servo Block Diagram
TD857BLDS
27
7
8
3
15
10
14
26
1
2
3
4
6
23
5
17
18
12
11
14
13
15
16 25
24
54CS
55
SDATA
61
REMOTE
PWRCON PWRCON
53
SCLK
CN401
DVD MAIN CBA UNIT
DRIVE CBA
IC301
(SERVO DRIVE)
IC451
(CLOCK GENERATOR)
BLOCK DIAGRAMS < DVD Section >
IC202
(OP AMP)
12 14
CN301
FG CBA
FG
SENSOR
M
SLED
MOTOR
M
SPINDLE
MOTOR
IC101
(MICRO CONTROLLER)
+
-+
-
+
-
+
-
+
-
+
-
+
-
SLED
MOTOR
DRIVE
FOCUS
ACTUATOR
DRIVE
1/4
1/4 PLL2
X451
MULTI
PLL X'TAL
OSC 36.864MHz
OSC
SPINDLE
MOTOR
DRIVE
TRACKING
ACTUATOR
DRIVE
EXT CLOCK
CLK33M
BE CLOCK
172
170
150
TRAY-OUT
TRAY-IN
FG-IN
97
SLD70
SPDL71
TRACKING
DRIVE
152
FOCUS DRIVE
60
66
TO DIGITAL SIGNAL
PROCESS BLOCK
FS(+)
FS(-)
TS(+)
TS(-)
TO DVD/ AUDIO
BLOCK 51
ADAC-MD
50 ADAC-MC
96 ADAC-ML
ADAC-MC
ADAC-ML
PCM-SCLK
95
A-MUTE
ADAC-MD
A-MUTE
17
92
FSEL
RESET68
RESET
IC461
5 4
+3.3V
TRAY-OUT
TRAY-IN
FOCUS SERVO SIGNAL TRACKING SERVO SIGNAL SLED SERVO SIGNAL SPINDLE SERVO SIGNAL
3SP(+)
4SP(-)
5TRAY-OUT
6TRAY-IN
7GND
8SL(-)
9SL(+)
1FG-IN
18 CS
20 SDATA
21 SCLK
22
DVD-REMOTE
FROM/TO SERVO
/SYSTEM CONTROL
BLOCK
<TV/VCR SECTION>
CN2402
63 TO POWER
SUPPLY BLOCK
<TV/VCR SECTION>
1-5-161-5-15
DVD-
" " = SMD
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
Digital Signal Process Block Diagram
TD857BLD
C 6
D 7
A 8
B 5
F 10
E 2
DVD-LD 14
CD-LD 12
PD-MONI 13
FS(+) 18
FS(-) 19
TS(+) 20
TS(-) 17
CN201
CN201
CN201
IC201
(SW)
IC105 (LATCH)
IC102 (SDRAM) IC101 (MICRO CONTROLLER)
FS
FS(+)
CD/DVD
FS(-)
TS(+)
TS(-)
TS
PICK-UP
UNIT
DETECTOR
CD/DVD 9
Q251,Q252
CD DVD
AMP
Q253,Q254
AMP
4
1 3
6
GND(DVD-PD)
15
GND(CD-PD)
16
GND(LD)
11
FROM DVD SYSTEM
CONTROL/SERVO
BLOCK
RF
SIGNAL
PROCESS
CIRCUIT
DVD/CD
FORMATTER
AUDIO
I/F
VIDEO
I/F
NTSC/PAL
ENCODER
DMA
BCU
INST.
ROM 32BIT
CPU
DATA
ROM
INTERRUPT
CONTROLLER
WATCH DOG
TIMER
CPU
I/F
TIMER
DECODER
I/F
CPU
I/F
READ
MEMORY
DATA
ROM
DSP
DECODER
PIXEL
OPERATION
I/O
PROCESSOR
INST.
ROM
DATA
ROM
INST.
ROM
DATA
ROM
INST.
ROM
SERIAL
D/A
GENERAL
I/O
INTERRUPT
CONTROLLER
TIMER
WATCH DOG
TIMER
32BIT CPU
STREAM
I/F
EXTERNAL
MEMORY
I/F
SDRAM
ECC
UMAC
124
125
122
123
128
129
126
127
131
130
135
133
132
134
78
DEBUG
BCU
INST
CACHE
D TYPE
LATCH
DATA
CACHE
D/A
TO CHROMA
BLOCK
CN2401
158
164
YCN601
C
TO DVD
AUDIO
BLOCK
181
SPDIF
175
PCM-BCK
176
PCM-DATA0
174
PCM-LRCLK
EXADT (0-15), EXADR (16-19)
EXADT (0-15), EXADR (16-19)
EXADT (0-7)
EXADT (8-15)
EXADR (0-7)
EXADR (0-15)
EXADR (8-15)
SDRAM DATA(0-31)SDRAM DATA(0-31)
SDRAM ADDRESS(0-10)SDRAM ADDRESS(0-10)
2
9
~
12
19
~
210
235
~
IC104 (LATCH)
D TYPE
LATCH
2
9
~
12
19
~
2
13
184
205
247
256
~~~
2
13
31
56
74
85
~~~
IC103 (FLASH ROM)
FLASH
ROM
29
36
38
45
~
~
DVD MAIN CBA UNIT
DATA(VIDEO/AUDIO) SIGNAL DVD VIDEO SIGNAL DATA(AUDIO) SIGNAL FOCUS SERVO SIGNAL TRACKING SERVO SIGNAL
24
27
60
66
~~
EXADT (0-15)
EXADR (16-19)
~
1
9
16
25
48
~
1 DVD-Y
3 DVD-C
1-5-181-5-17
<TV/VCR SECTION>
" " = SMD
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
DVD Audio Block Diagram
TD857BLAD
IC601 (AUDIO DAC)
7
8CN601
1
2
3
13
14
15
16
FROM
DVD SYSTEM
CONTROL
/SERVO
BLOCK
FROM
DIGITAL
SIGNAL
PROCESS
BLOCK
SERIAL
PORT
SERIAL
CONTROL
4X/8X
OVERSAMPLING
DIGITAL FILTER
/FUNCTION
CONTROLLER
ENHANCED
MULTI-LEVEL
DELTA-SIGMA
MODULATOR
DAC LPF+AMP L-CH
R-CH
LPF+AMP
DAC
SYSTEM CLOCK
PCM-BCK
SPDIF
PCM-DATA0
PCM-LRCLK
ADAC-MD
ADAC-MC
ADAC-ML
PCM-SCLK
DVD MAIN CBA UNIT
DATA(AUDIO) SIGNAL
A-MUTE
12 SPDIF
7 DVD-A(L)
9 DVD-A(R)
6 DVD-A-MUTE
TO AUDIO BLOCK
<TV/VCR SECTION>
CN2401
DVD AUDIO SIGNAL
1-5-201-5-19
" " = SMD
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
1-6-1 SC_5
231 5.0
(2.5)
PLAY mode
STOP mode
5.0
The same voltage for
both PLAY & STOP modes Indicates that the voltage
is not consistent here.
< DVD Section >
231 5.0
(2.5)
[ ]
5.0
Indicates that the voltage
is not consistent here.
< TV/VCR Section >
Unit: Volts
PLAY mode
REC mode
DVD mode
The same voltage for
PLAY, REC & DVD
modes
(Top View) (Bottom View)
(Bottom View)
Electrolytic Capacitor
+
Transistor or Digital Transistor
NPN Transistor PNP Transistor
NPN Digital Transistor PNP Digital
Transistor
(Top View)
(Top View)
E C B
E C B
< PCB Symbols >
E C B
(Top View)
(Top View)
E C B
E C B
Digital Transistor
< Schematic Diagram Symbols >
SCHEMATIC DIAGRAMS / CBA’S AND TEST POINTS
Standard Notes
WARNING
Critical components having special safety characteris-
tics are identified with a # by the Ref. No. in the parts
list and enclosed within a broken line* (where several
critical components are grouped in one area) along
with the safety symbol # on the schematics or
exploded views.
Use of substitute replacement parts which do not have
the same specified safety characteristics may create
shock, fire or other hazards.
Under no circumstances should the original design be
modified or altered without written permission from
Philips Consumer Electronics Company. Philips
assumes no liability, express or implied, arising out of
any unauthorized modification of design. Servicer
assumes all liability.
* Broken Line :
Capacitor Temperature Markings
Capacitors and transistors are represented by the fol-
lowing symbols.
Notes:
1. Do not use the part number shown on these draw-
ings for ordering. The correct part number is shown
in the parts list, and may be slightly different or
amended since these drawings were prepared.
2. To maintain original function and reliability of
repaired units, use only original replacement parts
which are listed with their part numbers in the parts
list section of the service manual.
3. Prefix symbol "CN" means "connector" (can dis-
connect and reconnect).
Prefix symbol "CL" means "wire-solder holes of the
PCB" (wire is soldered directly).
4. How to read converged lines.
Examples:
(1). "1-D3" means that line number "1" goes to area
"D3."
(2). "1-B1" means that line number "1" goes to area
"B1."
5. All resistance values are indicated in ohms
(K=103, M=106).
6. Resistor wattages are 1/4W or 1/6W unless other-
wise specified.
7. All capacitance values are indicated in µF
(P=10-6 µF).
8. All voltages are DC voltages unless otherwise
specified.
9. Voltage indications for PLAY and REC modes on
the schematics are as shown below
Mark Capacity
change rate Standard
temperature Temperature
range
(B) ±10% 20°C -25~+85°C
(F) +30 - 80% 20°C –25~+85°C
(SR) ±15% 20°C –25~+85°C
(Z) ±22.5% 20°C –25~+85°C
1-D3
Distinction Area
Line Number
(1 to 3 digits)
3
2
1
ABCD
1-B1
1-D3
AREA D3
AREA B1
1-6-2
Main 1/5 Schematic Diagram Parts Location Guide
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1207 A-1 D1207 A-1 R1214 A-4 R1259 D-1
C1208 A-1 D1208 B-1 R1215 A-4 R1260 D-1
C1209 B-1 D1210 D-1 R1216 A-4 R1262 D-3
C1210 B-1 D1213 C-4 R1217 A-4 R1263 D-3
C1211 B-1 D1216 A-1 R1218 A-4 R1267 D-4
C1212 B-1 D1217 A-2 R1219 B-3 R1269 C-4
C1213 C-1 D1219 E-1 R1220 A-3 R1270 C-4
C1214 C-1 D1224 B-4 R1221 B-3 R1271 A-2
C1216 C-1 D1227 D-3 R1222 A-3 R1272 C-4
C1217 C-1 D1229 E-3 R1223 B-3 R1273 C-4
C1218 C-1 D1230 E-4 R1224 A-1 R1274 C-4
C1219 C-1 D1231 E-3 R1225 A-1 R1275 C-1
C1220 D-1 D1964 E-4 R1226 B-2 R1277 B-4
C1221 D-1 D1965 E-4 R1227 B-4 R1278 A-2
C1222 D-2 R1228 A-1 R1280 B-4
C1223 D-2 IC1201 C-3 R1229 A-2 R1290 D-2
C1224 D-2 IC1202 D-1 R1230 B-2 R1291 D-1
C1225 D-2 R1232 A-2 R1292 D-1
C1226 D-2 L1202 D-2 R1233 A-1 R1294 D-2
C1233 D-1 L1203 E-1 R1234 A-1 R1299 D-2
C1235 D-3 L1211 F-4 R1235 B-1 R1971 D-4
C1236 D-3 R1236 B-1 R1980 E-4
C1238 C-4 Q1205 A-1 R1237 B-1 R1981 E-4
C1239 C-4 Q1206 D-3 R1238 C-1 R1990 D-3
C1240 C-4 Q1207 A-2 R1239 C-1
C1241 C-4 Q1210 A-1 R1240 C-1 SW1201 A-3
C1243 B-4 Q1211 A-1 R1241 C-1 SW1202 A-4
C1244 B-4 Q1212 D-3 R1243 D-2 SW1203 A-4
C1245 B-4 R1244 D-2 SW1206 A-4
C1246 B-4 R1200 D-3 R1245 D-2 SW1207 A-4
C1247 B-4 R1201 B-4 R1246 D-2 SW1208 A-4
C1252 F-4 R1202 B-4 R1247 D-2 SW1209 A-4
C1253 E-4 R1203 B-4 R1248 D-2 SW1210 A-4
C1254 F-4 R1204 B-4 R1249 D-2 SW1211 B-1
C1260 E-4 R1205 B-4 R1250 D-2 SW1212 B-4
R1206 B-4 R1251 D-2
CL1201 F-4 R1207 A-4 R1252 D-2 X1201 B-1
R1208 A-3 R1253 D-2 X1202 C-1
D1201 A-3 R1209 D-2 R1254 D-2
D1203 A-4 R1210 A-3 R1255 D-3RS1201B-1
D1204 A-2 R1211 A-3 R1256 D-1
D1205 A-3 R1212 A-4 R1257 D-1 TP1201 B-4
D1206 A-2 R1213 A-3 R1258 D-3
RESISTORS
DIODES
CAPACITORS RESISTORS
CONNECTOR
RESISTORS
TRANSISTORS
COILS
ICS
DIODES
SWITCHES
CRYSTAL OSCILLATORS
MISCELLANEOUS
TEST POINT
Main 1/5 Schematic Diagram < TV/VCR Section >
1-6-3 1-6-4 TD857SCM1
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
1-6-5 1-6-6 TD857SCM2
Main 2/5 Schematic Diagram < TV/VCR Section >
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
1 2 3
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
1-6-7
Main 2/5 Schematic Diagram Parts Location Guide
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1410 I-2 C1445 G-3 Q1401 K-2 R1435 H-3
C1411 J-2 C1446 H-3 Q1402 K-3 R1853 H-4
C1412 J-2 C1447 G-3 Q1403 K-4 R1856 H-4
C1413 J-2 C1449 K-2 Q1871 G-2 R1857 H-4
C1414 J-2 C1452 K-4 Q1872 H-1 R1858 H-2
C1416 J-2 C1854 H-4 Q1873 G-2 R1859 H-2
C1417 J-2 C1856 H-4 Q1874 G-1 R1861 H-2
C1418 K-2 C1857 H-4 Q1875 G-1 R1862 H-2
C1420 K-3 C1858 H-2 R1863 H-2
C1421 K-3 C1859 H-2 R1406 I-2 R1864 H-2
C1423 K-3 C1860 H-2 R1407 I-1 R1865 H-2
C1424 K-3 C1862 H-1 R1408 I-1 R1866 H-2
C1425 K-3 C1863 H-1 R1409 I-2 R1867 H-1
C1426 K-3 C1865 H-2 R1413 J-2 R1868 H-2
C1427 J-4 C1866 H-2 R1414 J-2 R1869 I-2
C1428 J-4 C1872 H-2 R1415 J-2 R1871 H-2
C1429 J-4 C1873 G-2 R1416 J-2 R1872 H-2
C1430 J-4 C1874 H-2 R1417 K-2 R1873 H-2
C1431 J-4 C1875 H-1 R1418 K-2 R1874 H-2
C1434 J-4 R1419 K-2 R1875 G-1
C1435 I-4 D1401 K-3 R1423 K-3 R1876 G-1
C1436 I-4 R1424 K-3 R1877 H-2
C1437 K-4 IC1401 H-2 R1425 K-3
C1438 I-4 R1426 K-3 X1401 I-4
C1439 I-4 L1402 J-4 R1427 J-4
C1440 I-4 L1403 G-2 R1428 J-4 TP1401 I-2
C1441 I-4 L1404 G-3 R1429 I-4 TP1402 K-3
C1442 I-4 L1405 K-4 R1430 K-4 TP1403 H-4
C1443 I-4 L1871 G-2 R1431 I-4 TP1802 G-2
C1444 H-3 L1872 H-1 R1434 G-3
CRYSTAL OSCILLATOR
TEST POINTS
RESISTORS
DIODE
IC
COILS
CAPACITORS CAPACITORS RESISTORSTRANSISTORS
Main 3/5 Schematic Diagram Parts Location Guide
1-6-8
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1002 P-1 C1333 N-1 D1352 Q-3 R1311 N-4
C1003 P-1 C1336 O-2 R1312 O-4
C1005 Q-1 C1337 O-2 IC1301 N-2 R1314 N-4
C1006 P-1 C1338 O-2 R1315 N-4
C1007 Q-1 C1339 O-2 L1001 P-1 R1316 N-4
C1008 Q-1 C1342 O-1 L1002 Q-2 R1320 N-2
C1009 P-1 C1343 O-1 L1302 N-1 R1329 M-4
C1010 Q-2 C1344 Q-3 R1330 N-1
C1011 P-1 C1345 Q-3 Q1010 Q-2 R1331 N-1
C1012 P-1 C1346 Q-3 Q1301 N-1 R1332 N-1
C1301 O-1 C1394 Q-3 Q1351 O-4 R1333 N-2
C1309 O-4 C1701 M-4 R1334 O-2
C1311 O-1 R1001 Q-1 R1335 O-2
C1314 N-4 CN1301 R-4 R1003 Q-1 R1336 O-2
C1316 N-4 R1006 P-1 R1337 O-2
C1317 N-4 D1302 Q-3 R1007 P-1 R1339 O-2
C1318 N-4 D1303 Q-3 R1008 Q-1 R1352 O-2
C1319 M-3 D1304 Q-3 R1010 Q-2 R1353 Q-3
C1321 M-2 D1305 O-1 R1011 Q-2 R1701 M-4
C1322 N-2 D1306 O-4 R1012 Q-2
C1323 N-2 D1307 O-4 R1013 Q-2 X1301 N-4
C1325 N-2 D1308 O-4 R1301 Q-3
C1327 N-1 D1309 O-2 R1303 Q-3 JK1701 M-4
C1330 N-1 D1311 O-4 R1305 Q-3 TU1001 P-2
C1331 N-1 D1318 N-4 R1308 O-4
C1332 N-1 D1351 M-4 R1310 O-4
CAPACITORS CAPACITORS DIODES
IC
COILS
TRANSISTORS
RESISTORS
RESISTORS
CRYSTAL OSCILLATOR
MISCELLANEOUS
CONNECTOR
DIODES
1-6-9 1-6-10 TD857SCM3
Main 3/5 Schematic Diagram < TV/VCR Section >
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
1 2 3
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
1-6-11 1-6-12 TD857SCM4
Main 4/5 Schematic Diagram < TV/VCR Section >
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
Main 4/5 Schematic Diagram Parts Location Guide
1-6-13
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1722 V-1 C1769 V-4 C1793 T-2 R1756 V-2
C1732 V-1 C1770 V-4 C1794 V-2 R1757 T-3
C1747 V-3 C1771 V-4 C1795 T-2 R1758 T-3
C1748 U-4 C1772 U-4 C1797 T-4 R1759 T-2
C1749 S-4 C1773 U-4 C1798 U-1 R1761 T-2
C1751 T-1 C1774 U-4 C1800 V-4 R1764 V-3
C1752 U-1 C1775 U-4 R1766 U-4
C1753 U-2 C1776 U-4 IC1751 T-2 R1767 T-2
C1754 U-2 C1777 U-4 R1768 T-2
C1755 U-2 C1778 T-4 L1751 W-3 R1769 U-4
C1756 V-1 C1779 T-4 L1752 W-4 R1770 V-3
C1757 V-1 C1780 T-4 R1771 V-3
C1758 V-2 C1781 T-4 Q1701 W-2 R1772 W-3
C1759 V-2 C1782 T-3 R1773 W-2
C1760 V-2 C1783 T-3 R1721 W-1 R1774 W-2
C1761 V-2 C1784 T-3 R1722 V-1
C1762 V-2 C1786 T-3 R1731 W-1 JK1702 W-1
C1763 V-3 C1787 T-3 R1732 V-1 JK1703 W-1
C1764 V-3 C1788 T-3 R1751 T-1
C1765 V-3 C1789 T-3 R1752 U-1 TP1701 T-2
C1766 U-4 C1790 T-3 R1753 U-1 TP1702 T-2
C1767 W-2 C1791 T-2 R1754 U-1
C1768 W-2 C1792 T-2 R1755 V-2
CAPACITORS RESISTORS
TRANSISTOR
TEST POINTS
IC
COILS
RESISTORS
MISCELLANEOUS
CAPACITORS CAPACITORS
Main 5/5 Schematic Diagram Parts Location Guide
1-6-14
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1419 Y-3 C1825 Y-4 L1804 BB-1 R1805 AA-2
C1627 Y-2 C1826 Z-4 L1806 BB-1 R1806 AA-1
C1628 Y-2 L1807 BB-1 R1807 AA-1
C1629 Y-2 CN1802 BB-1 R1808 AA-1
C1631 X-2 CN1803 X-2 Q1608 Y-2 R1809 AA-1
C1634 Y-2 CN1804 CC-3 Q1611 Y-2 R1814 Z-1
C1635 Y-1 CN1805 CC-2 Q1612 BB-3 R1815 BB-2
C1636 BB-3 Q1613 Y-1 R1816 AA-2
C1802 BB-2 D1632 X-2 Q1803 Y-3 R1820 Y-4
C1803 AA-1 D1633 X-2 Q1806 Y-4 R1821 Y-4
C1804 AA-2 D1635 Z-2 R1822 Y-4
C1805 AA-1 D1638 Z-2 R1645 Y-2 R1823 Y-4
C1806 AA-1 D1640 Z-2 R1646 Y-2 R1824 Y-3
C1807 AA-1 D1801 AA-2 R1648 Y-2 R1825 Y-4
C1808 AA-1 D1806 BB-1 R1649 Y-2 R1826 Y-4
C1809 AA-1 D1807 BB-1 R1656 Y-2 R1827 X-3
C1810 AA-1 R1657 Y-2 R1828 X-3
C1812 AA-1 IC1602 Y-2 R1659 Y-2 R1829 X-3
C1814 BB-1 IC1801 AA-2 R1660 Y-2
C1815 AA-1 IC1802 X-4 R1661 Y-1 JK1801 CC-1
C1816 BB-1 R1801 BB-1
C1823 X-4 L1802 BB-1 R1802 BB-1 TP1632 Z-3
C1824 X-3 L1803 BB-1 R1804 AA-2 TP1801 Z-4
RESISTORSCOILS
CAPACITORSCAPACITORS
CONNECTORS
DIODES
ICS
TEST POINTS
MISCELLANEOUS
COILS
TRANSISTORS
RESISTORS
1-6-15 1-6-16 TD857SCM5
Main 5/5 Schematic Diagram < TV/VCR Section >
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
Main CBA Parts Location Guide
1-6-17 1-6-18
Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C1002 A-5 C1327 A-4 C1634 A-1 C1800 C-2 D1231 D-5 Q1205 F-2
C1003 A-5 C1330 A-4 C1635 A-1 C1802 B-3 D1302 B-5 Q1206 E-3
C1005 A-5 C1331 A-4 C1636 E-2 C1803 A-3 D1303 B-5 Q1207 F-2
C1007 B-5 C1332 B-5 C1701 F-5 C1804 B-3 D1304 B-5 Q1210 F-1
C1008 A-5 C1333 A-5 C1722 F-5 C1805 A-3 D1305 A-4 Q1211 F-1
C1009 A-5 C1336 B-4 C1732 F-5 C1806 B-3 D1306 B-4 Q1212 E-1
C1010 A-5 C1337 B-4 C1747 C-1 C1807 A-3 D1307 B-4 Q1301 A-4
C1011 A-5 C1338 B-4 C1748 C-2 C1808 B-3 D1308 B-4 Q1351 A-4
C1012 A-5 C1339 B-4 C1749 C-2 C1809 B-3 D1309 B-4 Q1401 E-3
C1207 F-4 C1342 B-4 C1751 C-2 C1810 B-3 D1311 A-5 Q1402 D-3
C1208 F-2 C1343 B-4 C1752 C-2 C1812 A-3 D1318 B-5 Q1403 D-2
C1209 E-2 C1344 C-5 C1753 C-3 C1814 A-3 D1351 B-5 Q1608 A-2
C1210 E-2 C1345 B-5 C1754 C-2 C1815 A-3 D1352 C-5 Q1611 A-1
C1211 F-2 C1346 B-5 C1755 C-3 C1816 A-3 D1401 E-4 Q1612 E-2
C1212 F-2 C1394 C-5 C1756 C-3 C1823 B-3 D1632 E-2 Q1613 B-1
C1213 F-2 C1410 D-3 C1757 C-3 C1824 B-2 D1633 E-2 Q1701 C-3
C1214 F-2 C1411 D-3 C1758 C-2 C1825 B-2 D1635 B-1 Q1803 B-2
C1216 E-1 C1412 D-3 C1759 C-3 C1826 A-2 D1638 A-2 Q1806 B-3
C1217 F-2 C1413 D-3 C1760 C-2 C1854 D-2 D1640 A-1 Q1871 C-3
C1218 E-2 C1414 D-3 C1761 C-2 C1856 D-2 D1801 A-2 Q1872 C-3
C1219 E-2 C1416 D-3 C1762 C-2 C1857 D-2 D1806 E-5 Q1873 C-3
C1220 E-3 C1417 D-3 C1763 C-1 C1858 C-3 D1807 F-5 Q1874 C-3
C1221 E-3 C1418 D-3 C1764 C-1 C1859 D-3 D1964 C-5 Q1875 C-3
C1222 E-3 C1419 E-2 C1765 C-1 C1860 D-3 D1965 C-5
C1223 E-2 C1420 D-3 C1766 B-1 C1862 D-3 R1001 B-5
C1224 E-3 C1421 E-3 C1767 C-1 C1863 C-3 IC1201 F-3 R1003 B-5
C1225 E-3 C1423 D-3 C1768 C-1 C1865 C-3 IC1202 E-4 R1006 A-5
C1226 E-4 C1424 D-3 C1769 C-1 C1866 D-3 IC1301 A-4 R1007 A-5
C1233 E-4 C1425 D-3 C1770 B-1 C1872 C-3 IC1401 D-2 R1008 A-5
C1235 F-4 C1426 D-3 C1771 C-1 C1873 C-3 IC1602 A-1 R1010 A-5
C1238 F-4 C1427 D-2 C1772 C-1 C1874 C-3 IC1751 C-2 R1011 A-5
C1239 F-4 C1428 D-2 C1773 C-1 C1875 C-3 IC1801 A-3 R1012 A-5
C1240 F-3 C1429 E-2 C1774 C-2 IC1802 B-2 R1013 A-5
C1241 F-3 C1430 E-2 C1775 C-2 CN1301 C-5 R1200 E-5
C1243 F-3 C1431 E-2 C1776 B-1 CN1802 E-5 L1001 A-5 R1201 F-3
C1244 F-3 C1434 E-2 C1777 C-2 CN1803 A-1 L1002 A-5 R1202 E-4
C1245 F-3 C1435 E-2 C1778 B-2 CN1804 B-1 L1202 E-2 R1203 E-4
C1246 F-3 C1436 E-2 C1779 C-2 CN1805 F-1 L1203 E-2 R1204 E-5
C1247 F-3 C1437 D-2 C1780 B-1 L1211 C-5 R1205 E-4
C1252 C-5 C1438 D-2 C1781 C-2 D1201 F-3 L1302 A-3 R1206 E-5
C1253 D-5 C1439 E-2 C1782 B-2 D1203 F-3 L1402 E-3 R1207 F-3
C1254 D-5 C1440 D-2 C1783 C-2 D1204 F-2 L1403 C-4 R1208 F-2
C1260 E-5 C1441 D-2 C1784 B-2 D1205 E-1 L1404 D-2 R1209 E-4
C1301 B-4 C1442 E-2 C1786 C-2 D1206 F-2 L1405 E-2 R1210 F-3
C1309 B-4 C1443 E-2 C1787 B-2 D1207 E-2 L1751 C-1 R1211 F-3
C1311 B-4 C1444 D-2 C1788 B-2 D1208 E-2 L1752 C-2 R1212 F-3
C1314 A-4 C1445 D-2 C1789 B-2 D1210 E-4 L1802 E-5 R1213 F-2
C1316 A-4 C1446 C-3 C1790 B-2 D1213 F-3 L1803 F-4 R1214 F-2
C1317 A-4 C1447 C-3 C1791 B-2 D1216 F-1 L1804 F-4 R1215 F-2
C1318 B-4 C1449 E-2 C1792 C-2 D1217 F-1 L1806 F-4 R1216 F-2
C1319 A-4 C1452 E-2 C1793 C-2 D1219 E-2 L1807 E-5 R1217 F-2
C1321 A-4 C1627 A-1 C1794 C-2 D1224 E-3 L1871 C-3 R1218 F-3
C1322 A-4 C1628 A-1 C1795 B-2 D1227 F-3 L1872 C-3 R1219 F-3
C1323 A-4 C1629 A-1 C1797 C-2 D1229 C-5 R1220 E-1
C1325 A-5 C1631 A-1 C1798 C-3 D1230 D-5 Q1010 A-5 R1221 F-2
CAPACITORS CAPACITORS CAPACITORS CAPACITORS DIODES TRANSISTORS
DIODES
CONNECTORS
TRANSISTORS
COILS
ICS
RESISTORS
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
R1222 E-5 R1301 B-4 R1721 F-5 R1866 D-3
R1223 F-2 R1303 B-4 R1722 F-5 R1867 D-3
R1224 F-1 R1305 B-4 R1731 F-5 R1868 D-3
R1225 F-4 R1308 B-4 R1732 F-5 R1869 D-3
R1226 F-4 R1310 B-5 R1751 B-3 R1871 C-3
R1227 E-3 R1311 B-4 R1752 B-3 R1872 C-3
R1228 F-1 R1312 B-4 R1753 B-3 R1873 C-3
R1229 F-2 R1314 A-4 R1754 C-3 R1874 C-3
R1230 F-2 R1315 A-4 R1755 C-2 R1875 C-3
R1232 F-1 R1316 A-4 R1756 C-2 R1876 C-3
R1233 F-2 R1320 A-4 R1757 B-2 R1877 C-3
R1234 F-2 R1329 A-4 R1758 B-2 R1971 E-1
R1235 E-2 R1330 A-4 R1759 C-2 R1980 C-5
R1236 E-2 R1331 A-4 R1761 B-2 R1981 C-5
R1237 F-2 R1332 A-4 R1764 C-2 R1990 F-3
R1238 F-2 R1333 B-5 R1766 B-2
R1239 F-2 R1334 B-5 R1767 C-2 SW1201 F-4
R1240 E-2 R1335 B-4 R1768 B-2 SW1202 F-3
R1241 E-2 R1336 B-4 R1769 C-2 SW1203 F-3
R1243 E-2 R1337 B-4 R1770 C-1 SW1206 F-1
R1244 E-3 R1339 B-4 R1771 C-1 SW1207 F-2
R1245 E-3 R1352 A-4 R1772 C-3 SW1208 F-2
R1246 E-4 R1353 C-5 R1773 C-3 SW1209 F-2
R1247 E-4 R1406 E-2 R1774 C-3 SW1210 F-3
R1248 E-4 R1407 E-3 R1801 F-4 SW1211 F-1
R1249 E-4 R1408 E-2 R1802 F-4 SW1212 E-5
R1250 E-4 R1409 D-3 R1804 A-2
R1251 E-4 R1413 D-3 R1805 A-2 X1201 F-2
R1252 E-4 R1414 D-3 R1806 B-3 X1202 E-2
R1253 E-4 R1415 D-3 R1807 B-3 X1301 A-4
R1254 E-4 R1416 D-3 R1808 B-3 X1401 D-2
R1255 F-4 R1417 D-3 R1809 B-3
R1256 E-4 R1418 E-3 R1814 A-2 JK1701 F-5
R1257 E-4 R1419 E-2 R1815 B-3 JK1702 F-5
R1258 F-4 R1423 E-3 R1816 B-3 JK1703 F-5
R1259 E-4 R1424 D-3 R1820 B-2 JK1801 F-4
R1260 E-4 R1425 D-3 R1821 B-2 RS1201 F-4
R1262 E-2 R1426 D-3 R1822 B-2 TU1001 A-5
R1263 F-4 R1427 D-2 R1823 B-2
R1267 E-3 R1428 E-2 R1824 B-2 TP1201 B-3
R1269 F-4 R1429 E-2 R1825 B-2 TP1401 B-1
R1270 F-4 R1430 D-2 R1826 B-3 TP1402 B-1
R1271 F-1 R1431 E-2 R1827 B-2 TP1403 B-1
R1272 F-3 R1434 D-3 R1828 B-2 TP1632 C-1
R1273 F-3 R1435 C-3 R1829 B-2 TP1701 B-3
R1274 F-3 R1645 A-1 R1853 D-2 TP1702 B-2
R1275 E-2 R1646 A-1 R1856 D-2 TP1801 A-4
R1277 F-3 R1648 A-1 R1857 D-2 TP1802 B-3
R1278 F-1 R1649 A-1 R1858 C-3
R1280 F-3 R1656 A-1 R1859 C-3
R1290 E-4 R1657 A-1 R1861 C-3
R1291 E-2 R1659 A-1 R1862 C-3
R1292 E-2 R1660 A-1 R1863 D-3
R1294 E-2 R1661 A-1 R1864 D-3
R1299 E-5 R1701 F-5 R1865 D-3
RESISTORSRESISTORS RESISTORS RESISTORS
SWITCHES
CRYSTAL OSCILLATORS
MISCELLANEOUS
TEST POINTS
CTL-AMP-OUT
TP1201
WF3
NA-IN-YCA
TP1802
WF7
RF-SW
TP1401
WF1
V-OUT
TP1402
WF5
GND
TP1632
HA-MONITOR
TP1403
WF6
Main CBA Top View < TV/VCR Section >
1-6-19 BTD850F01011
1-6-20
BHB300F01014-A
BHB300F01014-B
Sensor CBA Top View
PIN 58
OF IC1201
PIN 59
OF IC1201
PIN 61
OF IC1401
PIN 42
OF IC1401
PIN 7
OF IC1401
PIN 41
OF IC1301
WF8
WF4
WF16
WF15
WF2
WF9
Main CBA Bottom View < TV/VCR Section >
1-6-21 1-6-22 BTD850F01011
2
+B ADJ
VR2601
DVD-C
TP2204
WF18
DVD-Y
TP2203
WF18
Power Supply / AV CBA Top View < TV/VCR Section >
1-6-23 1-6-24 BTD850F01021A
BECAUSE A HOT CHASSIS GROUND IS PRESENT IN THE POWER
SUPPLY CIRCUIT, AN ISOLATION TRANSFORMER MUST BE USED.
ALSO, IN ORDER TO HAVE THE ABILITY TO INCREASE THE INPUT
SLOWLY, WHEN TROUBLESHOOTING THIS TYPE POWER SUPPLY
CIRCUIT, A VARIABLE ISOLATION TRANSFORMER IS REQUIRED.
NOTE :
The voltage for parts in hot circuit is measured
using hot GND as a common terminal.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK
OF FIRE, REPLACE ONLY WITH SAME TYPE 4A, 125V FUSE.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE
MÊME TYPE DE 4A, 125V.
4A 125V
CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F2601) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
Power Supply / AV CBA Bottom View < TV/VCR Section >
1-6-25 1-6-26 BTD850F01021A
BECAUSE A HOT CHASSIS GROUND IS PRESENT IN THE POWER
SUPPLY CIRCUIT, AN ISOLATION TRANSFORMER MUST BE USED.
ALSO, IN ORDER TO HAVE THE ABILITY TO INCREASE THE INPUT
SLOWLY, WHEN TROUBLESHOOTING THIS TYPE POWER SUPPLY
CIRCUIT, A VARIABLE ISOLATION TRANSFORMER IS REQUIRED.
NOTE :
The voltage for parts in hot circuit is measured
using hot GND as a common terminal.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK
OF FIRE, REPLACE ONLY WITH SAME TYPE 4A, 125V FUSE.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE
MÊME TYPE DE 4A, 125V.
4A 125V
CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F2601) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
Power Supply / AV CBA Parts Location Guide
1-6-27 1-6-28
Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C2217 D-2 C2616 A-3 D2245 D-2 D2646 B-3 Q2207 D-2 R2233 D-2
C2218 D-2 C2617 A-3 D2412 D-2 D2648 C-4 Q2210 D-1 R2236 D-2
C2222 A-1 C2618 B-3 D2413 C-2 D2649 B-4 Q2211 D-1 R2237 D-2
C2224 B-1 C2619 A-4 D2403 C-4 D2650 D-4 Q2601 B-2 R2252 D-2
C2225 A-1 C2620 B-4 D2603 B-1 D2651 D-4 Q2602 B-2 R2253 D-2
C2226 A-1 C2621 A-4 D2604 B-1 D2657 A-4 Q2604 A-2 R2254 D-2
C2228 D-3 C2622 A-2 D2605 B-2 D2660 A-4 Q2605 A-4 R2255 D-2
C2229 D-1 C2624 A-4 D2606 A-1 D2661 D-3 Q2606 A-3 R2256 D-2
C2230 D-1 C2625 B-4 D2607 C-2 D2662 D-4 Q2607 A-4 R2257 D-2
C2231 D-2 C2626 A-3 D2609 B-2 D2663 A-4 Q2608 D-3 R2258 D-2
C2232 D-2 C2630 A-3 D2610 B-2 Q2609 A-4 R2261 D-2
C2233 D-2 C2631 D-1 D2611 B-2 IC2201 D-2 Q2610 C-4 R2262 D-2
C2236 A-1 C2632 A-4 D2613 A-3 IC2601 A-2 Q2611 C-4 R2263 D-2
C2238 D-2 C2633 A-4 D2614 A-3 IC2602 C-4 Q2612 C-3 R2283 D-2
C2239 D-4 C2637 B-4 D2615 B-3 IC2603 B-4 Q2613 A-4 R2284 D-1
C2261 A-1 C2640 B-3 D2616 B-3 IC2604 C-3 Q2614 A-4 R2301 D-1
C2262 D-2 C2642 A-4 D2617 B-3 Q2615 B-4 R2302 D-1
C2303 D-1 C2643 B-3 D2618 B-3 L2201 A-1 Q2617 D-3 R2303 D-1
C2401 D-3 C2645 C-3 D2619 B-4 L2203 A-1 Q2621 D-3 R2304 D-1
C2416 D-1 C2646 B-3 D2620 A-2 L2204 B-1 Q2622 D-3 R2305 D-1
C2418 C-3 C2647 C-4 D2621 A-2 L2205 B-1 Q2623 D-3 R2306 D-1
C2423 C-2 C2650 B-3 D2622 A-2 L2206 D-2 R2418 C-3
C2427 C-2 C2651 B-3 D2623 A-4 L2403 D-4 R2202 A-1 R2428 D-2
C2429 C-2 C2661 A-4 D2625 B-4 L2410 C-1 R2203 A-1 R2601 D-1
C2432 D-1 C2662 D-3 D2626 A-4 L2414 C-1 R2204 A-1 R2602 B-1
C2604 C-4 C2671 A-3 D2627 C-4 L2415 D-3 R2205 A-1 R2603 B-2
C2605 A-2 D2628 A-3 L2416 D-3 R2206 D-1 R2604 C-2
C2606 B-1 CN2401 D-1 D2631 A-2 L2417 D-4 R2207 D-1 R2605 B-2
C2607 B-1 CN2402 C-2 D2634 A-4 L2420 D-4 R2213 A-1 R2606 B-2
C2610 B-1 CN2601 B-2 D2635 A-4 L2421 C-3 R2214 B-1 R2607 B-2
C2611 B-2 CN2602 A-3 D2636 A-3 L2601 A-1 R2225 A-1 R2608 B-2
C2612 B-2 CN2803 B-4 D2640 A-3 R2226 A-1 R2609 A-4
C2613 B-2 CN2804 A-4 D2641 B-2 Q2202 A-1 R2227 A-1 R2610 B-2
C2614 B-2 D2644 D-3 Q2204 A-1 R2228 A-1 R2613 B-2
C2615 A-3 D2206 A-1 D2645 B-3 Q2205 A-1 R2229 A-1 R2614 B-2
DIODESDIODES
CAPACITORS
ICS
CAPACITORS TRANSISTORS
DIODES
TRANSISTORS
CONNECTORS
RESISTORS
COILS
RESISTORS
Ref No. Position Ref No. Position Ref No. Position
R2615 D-1 R2656 C-4 BC2412 C-3
R2616 B-3 R2657 C-3 BC2600 B-2
R2617 A-2 R2659 C-4 BC2601 A-2
R2618 A-3 R2660 C-4 BC2604 B-3
R2619 A-3 R2661 C-4 BC2605 A-3
R2620 A-3 R2662 B-2 BC2606 A-3
R2621 A-3 R2663 B-2 JK2201 A-1
R2622 A-3 R2664 A-4 F2601 A-2
R2623 A-2 R2665 A-4 PS2601 B-2
R2624 A-3 R2666 A-4 SA2601 A-2
R2625 A-3 R2667 A-4 SG2601 A-2
R2629 A-3 R2669 D-3 T2601 B-3
R2630 A-3 R2671 D-3 W2601 A-2
R2631 A-2 R2672 D-3
R2632 A-2 R2673 D-4 VR2601 A-2
R2633 A-2 R2676 B-3
R2634 A-4 R2678 D-3 TP2201 C-1
R2635 A-4 R2681 D-3 TP2202 C-1
R2636 D-3 R2682 D-3 TP2203 D-1
R2638 D-1 R2683 D-4 TP2204 D-1
R2639 A-4 R2684 D-4
R2640 A-4 R2685 D-4
R2641 A-3 R2686 B-4
R2642 A-4 R2687 B-4
R2643 C-3 R2689 B-4
R2644 A-4 R2690 C-3
R2645 A-3 R2691 B-4
R2646 C-4 R2696 D-3
R2647 B-4 R2697 D-3
R2649 C-3 R2698 D-3
R2650 B-4
R2651 C-4 BC2201 A-1
R2653 C-4 BC2202 A-1
R2654 A-4 BC2401 C-1
R2655 A-4 BC2410 D-1
MISCELLANEOUSRESISTORS RESISTORS
VARIABLE RESISTOR
TEST POINTS
MISCELLANEOUS
1-6-29 1-6-30
Power Supply /AV 1/2 Schematic Diagram Parts Location Guide
Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C2401 D-3 C2651 B-2 D2628 D-3 Q2607 E-1 R2629 C-2 R2665 D-3
C2604 C-2 C2661 E-3 D2631 A-4 Q2608 D-3 R2630 C-2 R2666 D-3
C2605 A-3 C2671 B-3 D2634 E-2 Q2609 E-3 R2631 C-1 R2667 D-3
C2606 A-3 D2635 E-2 Q2610 C-1 R2632 B-1 R2669 E-2
C2607 A-3 CN2601 A-4 D2636 E-2 Q2611 D-1 R2633 B-1 R2671 D-2
C2610 B-3 CN2602 F-4 D2640 C-3 Q2612 C-1 R2634 D-1 R2672 D-2
C2611 A-3 CN2804 F-4 D2641 A-2 Q2613 E-3 R2635 D-1 R2673 D-2
C2612 B-3 D2644 D-2 Q2615 D-2 R2636 D-2 R2676 C-2
C2613 A-3 D2403 C-1 D2645 B-2 Q2617 C-2 R2639 D-3 R2678 D-1
C2614 A-2 D2603 B-3 D2646 B-2 R2640 D-3 R2686 C-2
C2615 B-3 D2604 B-3 D2648 C-2 R2428 D-3 R2641 D-3 R2687 C-1
C2616 C-3 D2605 B-3 D2649 C-2 R2602 B-3 R2642 E-1 R2689 D-2
C2617 C-3 D2606 B-3 D2650 E-2 R2603 A-2 R2643 C-2 R2690 E-2
C2618 C-2 D2607 A-2 D2651 E-2 R2604 B-3 R2644 D-1 R2691 C-2
C2619 C-3 D2609 A-2 D2657 E-2 R2605 B-3 R2645 D-3
C2620 C-3 D2610 B-2 D2660 D-3 R2606 B-3 R2646 C-2 BC2600 B-3
C2622 B-2 D2611 B-2 D2663 E-3 R2607 A-3 R2647 D-4 BC2601 A-4
C2624 C-3 D2613 B-3 R2608 A-3 R2649 C-2 BC2604 B-3
C2625 C-3 D2614 B-3 IC2601 B-2 R2610 B-2 R2650 C-2 BC2605 B-3
C2626 E-1 D2615 B-3 IC2602 C-2 R2613 B-2 R2651 C-1 BC2606 B-3
C2630 B-1 D2616 B-3 IC2603 C-2 R2614 B-2 R2653 D-1 F2601 A-3
C2632 E-3 D2617 B-3 IC2604 D-2 R2616 B-3 R2654 E-3 PS2601 B-4
C2633 E-2 D2618 B-3 R2617 B-2 R2655 E-3 SA2601 A-3
C2637 D-1 D2619 C-3 L2403 D-1 R2618 C-1 R2656 C-1 SG2601 A-4
C2640 C-3 D2620 B-1 L2601 A-4 R2619 C-2 R2657 C-1 T2601 B-3
C2642 E-1 D2621 C-1 R2620 C-2 R2659 C-1 W2601 A-3
C2643 C-2 D2622 C-2 Q2601 A-3 R2621 C-3 R2660 C-1
C2645 D-2 D2623 E-2 Q2602 A-2 R2622 C-3 R2661 C-1 VR2601 C-2
C2646 C-2 D2625 C-2 Q2604 B-2 R2623 C-2 R2662 A-3
C2647 D-1 D2626 C-3 Q2605 D-1 R2624 C-2 R2663 A-3
C2650 B-2 D2627 C-3 Q2606 D-3 R2625 C-2 R2664 E-3
RESISTORSDIODES
CAPACITORS
CONNECTORS
DIODES
ICS
COILS
TRANSISTORS
RESISTORS
MISCELLANEOUS
VARIABLE RESISTOR
CAPACITORS RESISTORSTRANSISTORS
NOTE :
The voltage for parts in hot circuit is measured
using hot GND as a common terminal.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK
OF FIRE, REPLACE ONLY WITH SAME TYPE 4A, 125V FUSE.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE
MÊME TYPE DE 4A, 125V.
4A/125V
CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F2601) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
Power Supply/AV 1/2 Schematic Diagram < TV/VCR Section >
1-6-31 1-6-32 TD857SCP1
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
1 2 3
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
VOLTAGE CHART (Power off mode)
Ref. No. 1 4
IC2601 13.2 2.3
IC2602 2 0
IC2603 1.8 1.9
IC2604 0 ---
Ref. No.
Q2601
Ref. No.
Q2602
Q2603
Q2604
Q2605
Q2606
Q2607
Q2608
Q2609
Q2610
Q2611
Q2612
Q2613
Q2614
Q2615
Q2617
S
0
E
0
0
6.8
0
10.3
0
0.1
5.9
10.3
0.2
0
0.9
0.9
0
0.2
2
12.1
0
0.3
0D
140.7
C
1.4
4.9
12.1
8.0
10.2
0.1
9.8
9.3
0.2
10.3
10.2
4.6
4.6
2.5
1.8
3
0.3
0
0
0.2 G
1.4
B
0.3
0
7.4
0
9.6
0.7
0.2
6.6
10.2
0.3
0
1.4
1.4
0
0.5
Power Supply/AV 2/2 Schematic Diagram < TV/VCR Section >
1-6-33 1-6-34 TD857SCP2
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
Power Supply/AV 2/2 Schematic Diagram Parts Location Guide
1-6-35
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C2217 I-2 D2206 I-4 Q2623 H-2 R2302 H-3
C2218 I-2 D2245 I-3 R2303 H-3
C2222 K-4 D2412 K-2 R2202 H-4 R2304 I-3
C2224 K-4 D2413 K-1 R2203 H-4 R2305 I-3
C2225 H-4 D2661 H-4 R2204 H-4 R2306 I-3
C2226 H-4 D2662 G-1 R2205 H-4R2418K-2
C2228 I-1 R2206 K-3 R2601 I-3
C2229 J-2 IC2201 I-2 R2207 K-3 R2609 G-3
C2230 J-2 R2213 I-4 R2615 I-3
C2231 I-2 L2201 K-4 R2214 I-4 R2638 I-2
C2232 I-2 L2203 I-4 R2225 J-4 R2681 G-4
C2233 I-2 L2204 K-4 R2226 J-4 R2682 G-4
C2236 J-4 L2205 I-4 R2227 J-4 R2683 G-1
C2238 J-2 L2206 I-3 R2228 J-4 R2684 G-2
C2239 H-2 L2410 J-3 R2229 J-4 R2685 G-2
C2261 I-4 L2414 K-1 R2233 I-4 R2696 H-1
C2262 J-1 L2415 K-1 R2236 I-3 R2697 H-2
C2303 H-3 L2416 K-1 R2237 H-3 R2698 H-2
C2416 K-3 L2417 K-1 R2252 I-1
C2418 K-2 L2420 K-1 R2253 I-2 BC2201 K-4
C2423 K-1 L2421 J-2 R2254 I-1 BC2202 K-4
C2427 K-1 R2255 I-2 BC2401 K-3
C2429 J-1 Q2202 I-4 R2256 J-2 BC2410 J-3
C2432 K-2 Q2204 H-4 R2257 I-2 BC2412 K-1
C2621 G-3 Q2205 J-4 R2258 I-2 JK2201 K-4
C2631 I-2 Q2207 I-3 R2261 J-2
C2662 G-4 Q2210 I-3 R2262 H-2 TP2201 K-3
Q2211 I-3 R2263 I-2 TP2202 K-3
CN2401 L-3 Q2614 H-3 R2283 J-2 TP2203 K-3
CN2402 L-2 Q2621 H-1 R2284 J-1 TP2204 K-3
CN2803 G-4 Q2622 H-2 R2301 I-3
CONNECTORS
CAPACITORS RESISTORSDIODES
RESISTORS
TEST POINTS
COILS
TRANSISTORS
TRANSISTORS
MISCELLANEOUS
IC
1-6-36
H.V. Schematic Diagram Parts Location Guide
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C552 A-2 D571 B-2 R559 A-2 R587 C-1
C553 A-1 D572 C-2 R560 A-1 R588 C-1
C555 A-2 D584 C-2 R561 A-1 R589 B-2
C556 A-1 D585 C-2 R562 A-1 R590 B-2
C558 A-2 D591 B-1 R563 A-1 R591 B-1
C559 A-2 D595 B-2 R564 A-1 R592 C-1
C560 A-1 D596 B-1 R565 B-2 R593 C-1
C572 B-2 D597 B-1 R566 B-2 R594 C-1
C574 C-1 D598 C-1 R567 B-2 R596 C-2
C577 B-2 R568 B-2 R597 B-1
C578 B-2 IC551 A-2 R570 A-2 R598 C-1
C580 C-2 R571 B-2 R599 B-1
C581 C-2 L505 B-1 R572 A-2
C584 C-2 R573 A-3 BC571 C-2
C591 B-1 Q571 C-2 R574 B-2 T571 C-2
C592 C-1Q572B-2R575 B-2 T572 B-2
C594 B-1 Q591 B-1 R576 B-2
R577 B-2 J551 C-1
CL501A D-2 R536 C-2 R579 A-1 J552 C-1
CL502A A-1 R551 A-1 R580 B-2 J553 C-2
CL503A D-1 R552 A-2 R583 C-2 J563 B-2
CN571 B-2 R556 A-2 R584 C-2
R557 A-2 R585 C-2
D552 A-2 R558 A-2 R586 C-2
CONNECTORS
IC
MISCELLANEOUS
TEST POINTS
DIODES
RESISTORS
TRANSISTORS
CAPACITORS DIODES RESISTORSRESISTORS
COIL
1-6-37 TD857SCHV
H.V. Schematic Diagram < TV/VCR Section >
1-6-38
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
1-6-39 1-6-40
H.V. CBA Parts Location Guide
Junction-A CBA
Top View < TV/VCR Section >
Junction-A CBA
Bottom View < TV/VCR Section >
Junction-B CBA
Top View < TV/VCR Section >
Junction-B CBA
Bottom View < TV/VCR Section >
BTD850F01031-C
BTD850F01031-D
Ref No. Position Ref No. Position Ref No. Position
C552 B-2 D597 C-2 R574 C-1
C553 C-2 D598 C-2 R575 C-1
C555 B-2 R576 C-1
C556 B-2 IC551 B-2 R577 C-1
C558 B-2 R579 C-2
C559 B-2 L505 C-1 R580 C-1
C560 B-2 R583 A-2
C572 C-1 Q571 B-1 R584 A-1
C574 A-2 Q572 C-1 R585 A-1
C577 C-1 Q591 C-2 R586 A-1
C578 C-1 R587 C-1
C580 B-1 R536 A-1 R588 C-1
C581 B-1 R551 B-2 R589 C-1
C584 B-1 R552 C-2 R590 C-1
C591 C-1 R556 B-2 R591 C-2
C592 C-2 R557 B-2 R592 B-2
C594 C-2 R558 B-2 R593 C-2
R559 B-2 R594 C-2
CL501A B-2 R560 C-2 R596 C-2
CL502A C-1 R561 B-2 R597 C-2
CL503A C-2 R562 C-2 R598 C-2
CN571 A-1 R563 C-2 R599 C-2
R564 C-2
D552 B-2 R565 C-2 BC571 B-1
D571 B-2 R566 C-2 T571 A-2
D572 B-2 R567 C-2 T572 C-1
D584 C-1 R568 C-2
D585 C-2 R570 C-2 J551 A-2
D591 C-1 R571 C-1 J552 B-2
D595 C-2 R572 B-1 J553 B-2
D596 C-2 R573 B-1 J563 B-2
RESISTORS
DIODES
IC
COIL
MISCELLANEOUS
TEST POINTS
CAPACITORS
CONNECTORS
DIODES
TRANSISTORS
RESISTORS
FOCUS-VR
(UPPER SIDE)
SCREEN-VR
(LOWER SIDE)
+B ADJ
J553 R583
(H Adjustment) GND
J563
H.V. CBA Top View < TV/VCR Section >
1-6-41 1-6-42 BTD850F01031-A
WF11
PIN 5
OF CN571
Q571
Collector
WF10
1-6-43 1-6-44
H.V. CBA Bottom View < TV/VCR Section >
BTD850F01031-A
1-6-46
TD857SCCRT
CRT Schematic Diagram < TV/VCR Section >
TD857SCF
Function Schematic Diagram < TV/VCR Section >
1-6-45
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
1 2 3
5.0
(2.5)
<
0
>
~
5.0
THE SAME VOLTAGE FOR
PLAY,REC & DVD MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
REC MODE
DVD MODE
CRT SCHEMATIC DIAGRAM PARTS LOCATION GUIDE
Ref No. Position Ref No. Position Ref No. Position
C501 A-1 Q503 B-1 R515 B-1
C502 B-1 R516 B-1
C503 B-1 R501 B-2 R517 B-1
C504 C-1 R502 B-2 R518 B-1
C505 C-2 R503 B-2 R519 B-1
R504 B-2 R520 B-1
CL504A A-2 R505 B-2 R521 B-1
CN501 C-1 R506 B-2 R522 B-1
R507 B-2 R523 B-1
L501 A-2 R508 B-1 R524 B-1
R509 B-1
Q501 B-2 R513 A-1 JK501 C-2
Q502 B-2 R514 B-1
CONNECTORS
COIL
CAPACITORS
TRANSISTORS
TRANSISTORS
MISCELLANEOUS
RESISTORS
RESISTORS
FUNCTION SCHEMATIC DIAGRAM PARTS LOCATION GUIDE
Ref No. Position Ref No. Position
CN2801 C-1 R2406 C-1
CN2805 A-1 R2407 C-1
L2401 B-1 SW2401 A-2
L2402 C-1 SW2402 B-2
SW2403 B-2
R2401 A-1 SW2404 B-2
R2402 B-1 SW2405 B-2
R2403 B-1 SW2406 C-2
R2404 B-1 SW2407 C-2
R2405 B-1 SW2408 C-2
CONNECTORS RESISTORS
SWITCHES
RESISTORS
COILS
WF12
Q501
Collector
WF13
Q502
Collector
WF14
Q503
Collector
1-6-47 1-6-48 BTD850F01031-B
CRT CBA Top View < TV/VCR Section > CRT CBA Bottom View < TV/VCR Section >
CRT CBA PARTS LOCATION GUIDE
Ref No. Position Ref No. Position Ref No. Position Ref No. Position
C501 A-1Q501A-2R507 B-2 R520 A-2
C502 A-2Q502A-2R508 A-2 R521 A-2
C503 A-1Q503A-2R509 B-2 R522 A-2
C504 A-1 R513 A-2 R523 A-2
C505 B-2 R501 A-2 R514 A-1 R524 A-2
R502 A-2 R515 A-2
CL504A A-1 R503 A-2 R516 A-2 JK501 B-1
CN501 A-1 R504 B-2 R517 A-1
R505 B-2 R518 A-1
L501 A-2 R506 B-2 R519 A-2
CONNECTORS
COIL
TRANSISTORS
MISCELLANEOUS
RESISTORS
CAPACITORS RESISTORS RESISTORS
1-6-49 BTD850F01021B
1-6-50
Function CBA Top View < TV/VCR Section >
Function CBA Bottom View < TV/VCR Section >
Ref No. Position
CN2801 A-2
CN2805 D-1
L2401 A-1
L2402 A-2
R2401 D-1
R2402 D-1
R2403 C-1
R2404 C-1
R2405 C-1
R2406 C-1
R2407 C-1
SW2401 D-1
SW2402 D-1
SW2403 D-1
SW2404 C-1
SW2405 C-1
SW2406 C-1
SW2407 B-1
SW2408 B-1
FUNCTION CBA PARTS
LOCATION GUIDE
CONNECTORS
COILS
SWITCHES
RESISTORS
1-6-51 1-6-52 TD857SCD1
DVD Main 1/3 Schematic Diagram < DVD Section >
Voltage indications for PLAY and STOP modes
on the Schematic Diagrams are as shown below:
123 5.0
(2.5)
~
5.0
THE SAME VOLTAGE FOR
BOTH PLAY & STOP MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
STOP MODE
“ “ = SMD
1-6-53 1-6-54 TD857SCD2
DVD Main 2/3 Schematic Diagram < DVD Section >
Voltage indications for PLAY and STOP modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
~
5.0
THE SAME VOLTAGE FOR
BOTH PLAY & STOP MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
STOP MODE
“ “ = SMD
1-6-55 1-6-56
IC101 VOLTAGE CHAR
T
PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP
1 3.3 3.3 33 2.2 2.9 65 0.1 0.1 97 3.4 3.4 129 2.0 2.0
2 ~ ~ 34 ~ ~ 66 1.2 2.5 98 1.6 1.6 130 2.2 2.2
3 ~ ~ 35 ~ ~ 671.61.699 0 01312.32.3
4 0 0 36 ~ ~ 68 3.4 3.4 100 ----- ----- 132 0.4 0.1
5 ~ ~ 37 ~ ~ 69 0 0 101 ----- ----- 133 1.2 0.4
6 ~ ~ 38 0.3 0.5 70 1.7 1.7 102 ----- ----- 134 0.4 0.1
7 3.3 3.3 39 0.1 0.1 71 2.4 1.7 103 ----- ----- 135 0.2 0.2
8 ~ ~ 40 ~ ~ 72 ----- ----- 104 3.3 3.3 136 2.3 2.3
9 ~ ~ 41 ~ ~ 73 ----- ----- 105 0.9 0.9 137 1.7 1.7
10 ~ ~ 42 3.3 3.3 74 ----- ----- 106 0 0 138 0 0
11 0 0 43 0 0 75 3.4 3.4 107 0.8 0.8 139 1.7 1.7
12 ~ ~ 44 ~ ~ 76 ----- ----- 108 1.6 1.6 140 1.7 1.7
13 ~ ~ 45 ~ ~ 77 ----- ----- 109 2.1 2.1 141 1.7 1.7
14 3.3 3.3 46 2.0 2.6 78 0.1 0.1 110 2.6 2.6 142 1.7 1.7
15 1.5 1.5 47 ----- ----- 79 3.3 3.3 111 2.0 2.0 143 0.5 0.5
16 0 0 48 ----- ----- 80 0 0 112 0.7 0.9 144 1.6 1.6
17 3.4 3.4 49 ----- ----- 81 ----- ----- 113 ----- ----- 145 3.3 3.3
18 3.4 3.4 50 3.4 3.4 82 ----- ----- 114 1.8 1.8 146 1.8 1.8
19 ~ ~ 51 3.4 3.4 83 ----- ----- 115 1.4 1.4 147 ----- -----
20 ~ ~ 52 ----- ----- 84 ----- ----- 116 0.3 0.3 148 ----- -----
21 ~ ~ 53 3.4 3.4 85 ----- ----- 117 1.6 1.6 149 3.3 3.3
22 ~ ~ 54 3.4 3.4 86 ----- ----- 118 3.3 3.3 150 1.7 1.7
23 3.3 3.3 55 3.3 3.3 87 ----- ----- 119 0 0 151 0 0
24 0 0 56 3.3 3.3 88 ----- ----- 120 1.9 1.9 152 1.7 1.7
25 0.4 0.4 57 0 0 89 ----- ----- 121 1.9 1.9 153 3.3 3.3
26 0.9 0.6 58 0 0 90 ----- ----- 122 2.4 2.4 154 1.4 1.4
27 ~ ~ 59 ----- ----- 91 3.3 3.3 123 2.4 2.4 155 0 0
28 ~ ~ 60 3.4 3.4 92 1.7 1.5 124 2.4 2.4 156 2.2 2.2
29 3.3 3.3 61 3.1 3.1 93 0 0 125 2.4 2.4 157 3.3 3.3
30 0 0 62 ----- ----- 94 ----- ----- 126 2.0 2.0 158 0.7 0.7
31 ~ ~ 63 3.4 3.4 95 3.4 0.1 127 2.0 2.0 159 0 0
32 ~ ~ 64 ----- ----- 96 3.4 3.4 128 2.0 2.0 160 ----- -----
PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP
161 ----- ----- 193 ~ ~ 225 1.9 1.9
162 1.4 1.4 194 0 0 226 3.3 3.3
163 ----- ----- 195 3.3 3.3 227 ~ ~
164 0.9 0.9 196 ~ ~ 228 ~ ~
165 3.3 3.3 197 ~ ~ 229 ~ ~
166 1.5 1.5 198 0 0 230 0 0
167 0 0 199 ~ ~ 231 ----- -----
168 2.1 2.1 200 ~ ~ 232 3.3 3.3
169 0 0 201 ~ ~ 233 3.3 3.3
170 0.8 0.8 202 3.3 3.3 234 1.6 1.6
171 3.3 3.3 203 ~ ~ 235 ~ ~
172 1.6 1.6 204 ~ ~ 236 0 0
173 ----- ----- 205 ~ ~ 237 1.7 1.7
174 1.8 1.8 206 0 0 238 3.0 3.0
175 1.7 1.7 207 2.4 3.5 239 3.3 3.3
176 1.4 0.1 208 2.4 2.1 240 3.3 3.3
177 0 0 209 3.3 3.3 241 0 0
178 ----- ----- 210 ~ ~ 242 3.2 3.2
179 ----- ----- 211 0 0 243 2.4 2.1
180 ----- ----- 212 ~ ~ 244 1.5 1.5
181 1.7 1.7 213 1.5 1.5 245 0 0
182 3.3 3.3 214 ~ ~ 246 2.4 2.1
1830 02150 0247~ ~
184 ~ ~ 216 ~ ~ 248 0 0
185 ~ ~ 217 ~ ~ 249 ~ ~
186 1.5 1.5 218 3.3 3.3 250 3.3 3.3
187 ~ ~ 219 ~ ~ 251 ~ ~
188 ~ ~ 220 ~ ~ 252 ~ ~
189 3.3 3.3 221 0 0 253 ~ ~
190 ~ ~ 222 1.5 1.5 254 0 0
191 ~ ~ 223 1.9 1.9 255 ~ ~
192 ~ ~ 224 0 0 256 ~ ~
1-6-57 1-6-58 TD857SCD3
DVD Main 3/3 Schematic Diagram < DVD Section >
Voltage indications for PLAY and STOP modes
on the Schematic Diagrams are as shown below:
123
5.0
(2.5)
~
5.0
THE SAME VOLTAGE FOR
BOTH PLAY & STOP MODES. INDICATES THAT THE VOLTAGE
IS NOT CONSISTENT HERE.
PLAY MODE
STOP MODE
“ “ = SMD
WIRING DIAGRAM < TV/VCR SECTION >
1-7-1 TD857WIT
1-7-2
CRT CBA
BTD850F01031-B
H.V. CBA
BTD850F01031-A
FOCUS SCREEN
GND
L551
D.Y. HD
VD
CL501A
CL501
CL503A
MAIN CBA
BTD850F01011
POWER SUPPLY /AV CBA
BTD850F01021A
FUNCTION CBA
BTD850F01021B
CN1301
CN501
W2601
1
2
3
4
5
T571
FBT
CL504A
ANODE
1
2
3
4
5
1
2
3
4
9
10
11
12
6
7
8
1
2
3
4
5
6
7
8
CL504B
CL503B CN503
CL502A
CN571
4
6
1
2
3
3
4
5
2
1
CL502BCN502
JUNCTION-A CBA
BTD850F01031-C
JUNCTION B CBA
BTD850F01031-D
SP1802
SPEAKER
R-CH
SP2801
SPEAKER
L-CH
CL1802
CONTINUE
WIRING DIAGRAM
(DVD SECTION)
5
6
CN2601
FULL
ERASE HEAD
WIRING DIAGRAM FOR SECTION 2
(DECK MECHANISM)
CL1403
FE HEAD
AUDIO HEAD
CONTROL
HEAD
AC HEAD ASSEMBLY
AUDIO ERASE
HEAD
M
LOADING
MOTOR
CYLINDER
ASSEMBLY
1P-ON+12V
P-ON+5V(3)
2
3C-FG
C-F/R
4
C-CONT
5
FG-GND
6
LD-CONT
7
D-CONT
8
D-PFG
9
M-GND
10
D/L+12V
11
D/L+15V
12
CL1201
CL1401
CN2804CN1803
CN2401
CN2602
SP-GND
1
SP-L
2
CN2801
CN1802
CN2402
CN2803
CN1804
CN2805CN1805
CAPSTAN
MOTOR
Hi-Fi-
AUDIO(L)
HEAD
Hi-Fi-
AUDIO(R)
HEAD
VIDEO
(R)-2
HEAD
VIDEO
(L)-2
HEAD
VIDEO
(L)-1
HEAD
VIDEO
(R)-1
HEAD
M
DRUM
MOTOR
PG
SENSOR
CL1402
1
2
SP-GND
SP-R1
2
TO CN401
TO CN601
CL2801
SENSOR CBA
(END-SENSOR)
BHB300F01014-A,B
SENSOR CBA
(ST-SENSOR)
BHB300F01014-A,B
Hi-Fi-A(L)
1
Hi-Fi-COM
2
Hi-Fi-A(R)
3
V(R)-2
4
V-COM
5
V(L)-2
6
V(L)-1
7
V-COM
8
V(R)-1
9
AE-H
1
AE-H/FE-H
2
A-COM
3
A-PB/REC
4
CTL(+)
5
CTL(-)
6
FE-H
1
FE-H-GND
2
P-SAFETY2 1
GND 1
BLUE 2
GREEN 3
RED 4
P-SAFETY1 2
FBP 3
H-DRIVE 4
V-RAMP-FB 5
GND 6
ACL/ABL 7
V-DRIVE 8
GND
9
BLUE
10
GREEN
11
RED
12
P-SAFETY2
1
P-SAFETY1
2
FBP
3
H-DRIVE
4
V-RAMP-FB
5
GND
6
ACL/ABL
7
V-DRIVE
8
HEATER
1 1
GND
2 2
+180V
3 3
GND
1
GND
2
DEF+B
3
GND
4
+B
5
+B
6
GAP-GND
1 1
GAP-GND
2 2
GND
3 3
P-ON+9V(1)
4 4
NU
5 5
P-ON+9V(2)
6 6
NU
7 7
AL+5.7V
8 8
AL+33V
9 9
P-ON+12V
10 10
GND
11 11
GND
12 12
GND
13 13
DVD-Y
14 14
DVD-C
15 15
GND
16 16
GND
17 17
P-ON+12V
18 18
D/L+15V
19 19
GND
1 1
P-ON+9V(3)
2 2
GND
3 3
JACK-OUT(L)
4 4
JACK-OUT(R)
5 5
GND
6 6
DVD-A(L)
7 7
DVD-A(R)
8 8
P-ON-H
9 9
DVD-A-MUTE
10 10
JACK-MUTE
11 11
SDATA
12 12
SCLK
13 13
CS
14 14
DVD-REMOTE
15 15
DVD-MAIN-POWER
16 16
P-SAFETY2
17 17
P-SAFETY3
18 18
AC-DOWN
19 19
GND
1 1
SP-L
2 2
NU
3 3
NU
4 4
KEY1
5 5
GND
6 6
GND
7 7
SPDIF 1
AUDIO+5V 2
NU 3
DVD-A(R) 4
NU 5
DVD-A(L) 6
DVD-A-MUTE 7
GND 8
GND 9
DVD-C 10
GND 11
DVD-Y 12
EV+1.5V 1
EV+1.5V 2
EV+1.5V 3
EV+3.3V 4
EV+3.3V 5
GND 6
GND 7
GND 8
GND 9
GND 10
GND 11
GND 12
DVD-ON+5V 13
AL+9V 14
AL+9V 15
NU 16
DVD-ON+3.3V 17
CS 18
PWRCON 19
SDATA 20
SCLK 21
DVD-REMOTE 22
GND 1
GND 2
DEF+B 3
GND 4
+B 6
+B 5
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "JP" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
DVD MECHA
1-7-3 1-7-4
WIRING DIAGRAM < DVD SECTION >
DVD MAIN CBA UNIT
TD857WID
PICK UP UNIT
CN201
CN301
1
2
3
4
TRAY-OUT
TRAY-IN
GND
5
6
SP(-)
7
SP(+)
8 SL(-)
9 SL(+)
FG-IN
DVD-ON+3.3V
TRAY-IN
CN401
CN601
DRIVE CBA
FSTS
DETECTOR
11
2
3
5
6
4
7
FG CBA
FG
SENSOR
TRAY-OUT
SW3001
SW3002
M
SLED
MOTOR
MSPINDLE
MOTOR
1GND
2E
3DVD-ON+5V
4VREF
5B
6C
7D
8A
9CD/DVD
10 F
11 GND(LD)
12 CD-LD
13 PD-MONI
14 DVD-LD
15
GND(DVD-PD)
16 GND(CD-PD)
17 TS(-)
18 FS(+)
19 FS(-)
20 TS(+)
TO CN2402
TO CN2401
SPDIF 12
AUDIO+5V 11
NU 10
DVD-A(R) 9
NU 8
DVD-A(L) 7
DVD-A-MUTE 6
GND 5
GND 4
DVD-C 3
GND 2
DVD-Y 1
EV+1.5V 1
EV+1.5V 2
EV+1.5V 3
EV+3.3V 4
EV+3.3V 5
GND 6
GND 7
GND 8
GND 9
GND 10
GND 11
GND 12
DVD-ON+5V 13
AL+9V 14
AL+9V 15
NU 16
DVD-ON+3.3V 17
CS 18
PWRCON 19
SDATA 20
SCLK 21
DVD-REMOTE 22
CONTINUE
WIRING DIAGRAM
(TV/VCR SECTION)
NOTE FOR WIRE CONNECTORS:
1. PREFIX SYMBOL "CN" MEANS CONNECTOR.
(CAN DISCONNECT AND RECONNECT.)
2. PREFIX SYMBOL "JP" MEANS WIRE-SOLDER
HOLES OF THE PCB.
(WIRE IS SOLDERED DIRECTLY.)
1-8-1 TD857PIN
IC PIN FUNCTION DESCRIPTIONS
IC1201 (TV/VCR Micro Computer)
“H” 4.5V, “L1.0V
Pin
No. IN/
OUT Signal
Name Function
1 IN LD-SW Loading Switch Input
2 IN P-SAFETY 1 Power Supply Failure
Detection 1
3 IN P-SAFETY 2 Power Supply Failure
Detection 2
4IN ST/SAP-IN Tuner Stereo/Sap Detector
Signal Input
5 IN KEY0 Key 0 Input
6 IN KEY1 Key 1 Input
7 IN END-SENS End-Sensor
8 IN AFT AFT Input
9 IN ST-SENS Start-Sensor
10 IN V-ENV Video Envelope Input
11 OUT VOL-CONT Output Volume Control
Signal
12 - NU Not Used
13 OUT DV SYNC Artificial V-Sync Output
14 IN REMOTE Remote Signal Input
15 OUT ROTA Color Phase Rotary
Changeover SIgnal
16 OUT V-H-SW Video Head Amp Switching
Pulse
17 IN ENV-DET Envelope Comparator
Signal
18 OUT RF-SW Video Head Switching
Pulse
19 OUT HiFi-H-SW HiFi Audio Head Switching
Pulse
20 - NU Not Used
21 OUT REC-LED Recording LED Control
Signal
22 IN NORMAL-H Audio Mode Input Signal
23 OUT ACL-CONT ACL Control Signal
24 - NU Not Used
25 - DVD-
REMOTE
Remote Control Signal to
DVD
26 OUT TV/VCR-
LED
TV/VCR Mode LED Control
Signal
27 OUT REC/EE/PB YCA IC Mode Output
28 IN/
OUT SP/LP/SLP Tape Speed Control Output
29 OUT EXT-H External Input or Playback
SIgnal Output
30 OUT RENTAL Rental Position Control
Signal
31 OUT P-ON-H Power On Signal at High
32 OUT SPL-PLAY Special Playback Control
Signal
33 IN REC-
SAFETY
Record Protection Tab
Detection
34 IN RESET System Reset Signal
(Reset=”L”)
35 IN XC-IN Sub Clock 32 kHz
36 OUT XC-OUT Sub Clock 32 kHz
37 - TIMER+5V Vcc
38 IN X-IN Main Clock Input
39 OUT X-OUT Main Clock Output
40 - GND GND
41 OUT SPOT-KILL Counter-measure for Spot
42 IN DVD-MAIN-
POWER
Power On Signal to High for
DVD
43 IN CLKSEL Clock Select (GND)
44 OUT D-REC-H Delayed Record Signal
45 IN I2C-OPEN White Balance Adjust
Mode Judgment
46 - GND GND
47 - NU Not Used
48 OUT DVD-H DVD at High
49 - GND OSD GND
50 - CS Chip Select
51 OUT SCLK HiFi Communication Clock
52 IN/
OUT SDATA Serial Data
53 - P-ON+5V OSD Vcc
54 - HLF HLF
55 IN V-HOLD VHOLD
56 IN CV-IN Video Signal Input
57 - GND GND
58 IN H-SYNC H-SYNC Input
Pin
No. IN/
OUT Signal
Name Function
1-8-2 TD857PIN
59 IN V-SYNC V-SYNC Input
60 OUT OSD-BLK Output for Picture Cut off
61 - NU Not Used
62 OUT OSD-B Blue Output
63 OUT OSD-G Green Output
64 OUT OSD-R Red Output
65 OUT A-MUTE Audio Mute Output
66 OUT C-F/R Capstan Motor FWD/REV
Control Signal
67 OUT JACK-MUTE Earphone Jack Audio Mute
Output
68 - NU Not Used
69 OUT DVD-A-
MUTE DVD Audio Mute Signal
70 - NU Not Used
71 OUT SCL
E2PROM/CHROMA IC
Tuner Communication
Clock
72 IN/
OUT SDA E2PROM/CHROMA IC
Tuner Communication Data
73 - NU Not Used
74 IN C-SYNC C-Sync Input
75 - NU Not Used
76 OUT C-CONT Capstan Motor Control
Signal
77 OUT D-CONT Drum Motor Control Signal
78 IN P-SAFETY 3 Power Supply Failure
Detection 3
79 - NU Not Used
80 IN T-REEL Take Up Reel Rotation
Signal
81 - NU Not Used
82 OUT LD-CONT Loading Motor Control
Signal
83 - NU Not Used
84 IN P-DOWN Power Voltage Down
Detector Signal
85 - NU Not Used
86 - NU Not Used
87 IN C-FG Capstan Motor Rotation
Detection Pulse
88 - GND GND (AMP)
89 - NU Not Used
Pin
No. IN/
OUT Signal
Name Function
90 IN D-PFG Drum Motor Phase/
Frequency Generator
91 - NU Not Used
92 OUT AMP VREF
IN Standard Voltage Input
93 - C C
94 IN/
OUT CTL (-) CTL (-)
95 IN/
OUT CTL (+) CTL (+)
96 - AMPC AMPC
97 OUT CTL-AMP-
OUT Control Amp Output
98 - P-ON+5V Power Supply for AMP
99 - AL+5V A/D, D/A Standard Voltage
100 - NU Not Used
Pin
No. IN/
OUT Signal
Name Function
1-9-1 TD857LE
2SC3331(T,U)
2SC1627Y-TPE2
2SA950(Y,O)
KTA1271(Y)
2SC3400
2SA1175(F)
KTA1267(GR)
KRC103M
KTC3199(GR)
2SC2785(J,H,F)
BA1F4M-T
BN1F4M-T
KRA103M
2SD400(F)
2SC2482 TPE6
2SC3468(E,D)-AE
E C B
E C B
2SC1815-GR(TPE2)
2SC2120-(O,Y)(TPE2)
KTA1266(GR)
KTC3198(GR)
2SA1015-GR(TPE2)
KIA7805API
KA7805A
AN7805F
IN G OUT
KE
LTV-817(B,C)-F
PC817X6
AC
LA78041
LA78045
17
M37762MCA-BA4GP
LA71091M
80 51
81
100
130
50
31
5
4
8
1
BR24C02F-W
AT24C02N-10SC
M24C02-MN6
BR24C02F
CAT24WC02JI
M24C02-WMN6
MID-32A22
E
C
60
LA72670M
21
40
41
20
1
80
61
RAK
KIA431-AT
1 4
8 5
NJM4558D
1234
PQ070XF01SZ
PQ018EF01SZ
16 9
8
TC4053BF(N)
CD4053BCSJX
1
42 22
21
M61275FP
M61275FP-61
1
Note:
A: Anode
K: Cathode
E: Emitter
C: Collector
B: Base
R: Reference
S: Source
G: Gate
D: Drain
112
AN17805A
1: Vin
2: Vo
3: GND
4: Vc
1234
AN5522
LA78040A
B C E
TT2140LS-YB11
2SC5885000RF
S D G
2SK2662
LEAD IDENTIFICATIONS
20030411 1-10-1 TD857EL
ELECTRICAL PARTS LIST
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read care-
fully the product safety notice in this service manual.
Don't degrade the safety of the product through
improper servicing.
To order parts call the TOLL FREE Philips Sales
Center number: 1 - 800 - 851 - 8885
(In Canada) 1 - 800 - 363 - PART.
1 - 800 - 535 - 3715 (Fax).
NOTES:
1. Parts that are not assigned part numbers
(---- --- ----- or blank) are not normally available.
2. ”=SMD
DVD MAIN CBA UNIT
MMA CBA
MAIN CBA
Ref. #Description ID No. Part No.
DVD MAIN CBA UNIT N79V0GUP 4835 214 38202
Ref. #Description ID No. Part No.
MMA CBA
Consists of the following: 0ESA05251 ---- --- -----
MAIN CBA
SENSOR CBA ----------
0ESA04524 ---- --- -----
---- --- -----
Ref. #Description ID No. Part No.
MAIN CBA
Consists of the following: ---------- ---- --- -----
CAPACITORS
C1002 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1003 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1005 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1006 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1007 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
C1008 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1009 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1010 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1011 CERAMIC CAP.(AX) 100pF/50V ±10% (B) CCA1JKT0B101 4835 122 47014
C1012 CERAMIC CAP.(AX) 100pF/50V ±10% (B) CCA1JKT0B101 4835 122 47014
C1207 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1208 ELECTROLYTIC CAP. 47µF/6.3V ±20% H7 CE0KMAVSL470 4835 124 47265
C1209 CERAMIC CAP.(AX) 0.022µF/6V ±30% (Y) CCA0KNT0Y223 4835 122 47723
C1210 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1211 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1212 CERAMIC CAP.(AX) 20pF/50V ±5% (CH) CCA1JJTCH200 4835 122 47547
C1213 CERAMIC CAP.(AX) 20pF/50V ±5% (CH) CCA1JJTCH200 4835 122 47547
C1214 ELECTROLYTIC CAP. 47µF/6.3V ±20% H7 CE0KMAVSL470 4835 124 47265
C1216 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1217 CERAMIC CAP.(AX) 10pF/50V ±5% (CH) CCA1JJTCH100 4835 122 47003
C1218 CERAMIC CAP.(AX) 15pF/50V ±5% (CH) CCA1JJTCH150 4835 122 47085
C1219 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1220 ELECTROLYTIC CAP. 47µF/6.3V ±20% H7 CE0KMAVSL470 4835 124 47265
C1221 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1222 CERAMIC CAP.(AX) X M 2200pF/16V CCA1CMT0X222 4835 122 47727
C1223 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1224 CERAMIC CAP.(AX) 1000pF/50V ±10% (B) CCA1JKT0B102 4835 122 47004
C1225 CERAMIC CAP.(AX) 560pF/50V ±10% (B) CCA1JKT0B561 4835 122 47206
C1226 CERAMIC CAP.(AX) 1000pF/50V ±10% (B) CCA1JKT0B102 4835 122 47004
C1233 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1235 CERAMIC CAP.(AX) 4700pF/16V ±10% (X) CCA1CKT0X472 4835 122 47743
C1236 CERAMIC CAP.(AX) 0.047µF/16V +80/-20%
(F) CCA1CZTFZ473 4835 122 47603
C1238 CERAMIC CAP.(AX) 1000pF/50V ±10% (B) CCA1JKT0B102 4835 122 47004
C1239 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1240 CERAMIC CAP.(AX) 560pF/50V ±10% (B) CCA1JKT0B561 4835 122 47206
C1241 CERAMIC CAP.(AX) 4700pF/16V ±10% (X) CCA1CKT0X472 4835 122 47743
C1243 ELECTROLYTIC CAP. 22µF/16V ±20% LL or CE1CMASLL220 4835 124 47175
ELECTROLYTIC CAP. 22µF/16V ±20% LL CE1CMASLH220 4835 124 47175
C1244 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1245 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1246 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1247 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1252 ELECTROLYTIC CAP. 100µF/16V ±20% or CE1CMASDL101 4835 124 47033
ELECTROLYTIC CAP. 100µF/16V ±20% CE1CMASTL101 4835 124 47033
C1253 ELECTROLYTIC CAP. 100µF/10V ±20% or CE1AMASDL101 4835 124 47323
ELECTROLYTIC CAP. 100µF/10V ±20% CE1AMASTL101 4835 124 47323
C1254 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1260 CERAMIC CAP.(AX) 1000pF/50V ±10% (B) CCA1JKT0B102 4835 122 47004
C1301 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1309 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1311 ELECTROLYTIC CAP. 470µF/10V ±20% or CE1AMASDL471 4835 124 47286
ELECTROLYTIC CAP. 470µF/10V ±20% CE1AMASTL471 4835 124 47286
C1314 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1316 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1317 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1318 ELECTROLYTIC CAP. 100µF/6.3V ±20% or CE0KMASDL101 4835 124 47165
ELECTROLYTIC CAP. 100µF/6.3V ±20% CE0KMASTL101 4835 124 47263
C1319 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1321 ELECTROLYTIC CAP. 330µF/6.3V ±20% or CE0KMASDL331 4835 124 47153
ELECTROLYTIC CAP. 330µF/6.3V ±20% CE0KMASTL331 4835 124 47131
C1322 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1323 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1325 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1327 ELECTROLYTIC CAP. 100µF/10V ±20% or CE1AMASDL101 4835 124 47323
ELECTROLYTIC CAP. 100µF/10V ±20% CE1AMASTL101 4835 124 47323
C1330 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1331 ELECTROLYTIC CAP. 220µF/10V ±20% or CE1AMASDL221 4835 124 47099
ELECTROLYTIC CAP. 220µF/10V ±20% CE1AMASTL221 4835 124 97065
Ref. #Description ID No. Part No.
20030411 1-10-2 TD857EL
C1332 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1333 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1336 TF CAP. 0.47µF/50V ±5% or CT1J474MS045 4835 124 47764
FILM CAP. 0.47µF/50V ±5% 122Z317S 4835 121 47721
C1337 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1338 ELECTROLYTIC CAP. 2.2µF/50V ±20% or CE1JMASDL2R2 4835 124 47086
ELECTROLYTIC CAP. 2.2µF/50V ±20% CE1JMASTL2R2 4835 124 47049
C1339 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1342 ELECTROLYTIC CAP. 470µF/10V ±20% or CE1AMASDL471 4835 124 47286
ELECTROLYTIC CAP. 470µF/10V ±20% CE1AMASTL471 4835 124 47286
C1343 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1344 CERAMIC CAP.(AX) 68pF/50V ±5% (SL) CCA1JJTSL680 4835 122 47217
C1345 CERAMIC CAP.(AX) 68pF/50V ±5% (SL) CCA1JJTSL680 4835 122 47217
C1346 CERAMIC CAP.(AX) 68pF/50V ±5% (SL) CCA1JJTSL680 4835 122 47217
C1394 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1410 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1411 ELECTROLYTIC CAP. 100µF/6.3V H7 CE0KMAVSL101 4835 124 47127
C1412 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1413 CERAMIC CAP.(AX) 390pF/50V ±10% (B) CCA1JKT0B391 4835 122 47041
C1414 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1416 CERAMIC CAP.(AX) 180pF/50V ±10% (B) CCA1JKT0B181 4835 122 17015
C1417 CERAMIC CAP.(AX) 22pF/50V ±5% (SL) CCA1JJTSL220 4835 122 37016
C1418 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
C1419 ELECTROLYTIC CAP. 0.1µF/50V ±20% H7 CE1JMAVSLR10 4835 124 47048
C1420 ELECTROLYTIC CAP. 22µF/16V ±20% H7 CE1CMAVSL220 4835 124 47175
C1421 ELECTROLYTIC CAP. 4.7µF/50V ±20% H7 CE1JMAVSL4R7 4835 124 97061
C1423 ELECTROLYTIC CAP. 10µF/50V ±20% H7 CE1JMAVSL100 4835 124 47037
C1424 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1425 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1426 ELECTROLYTIC CAP. 22µF/16V ±20% H7 CE1CMAVSL220 4835 124 47175
C1427 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1428 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1429 ELECTROLYTIC CAP. 47µF/6.3V ±20% H7 CE0KMAVSL470 4835 124 47265
C1430 CERAMIC CAP.(AX) 0.022µF/25V +80/-20%
(F) CCA1EZTFZ223 4835 122 47736
C1431 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1434 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1435 ELECTROLYTIC CAP. 2.2µF/50V ±20% H7 CE1JMAVSL2R2 4835 124 47049
C1436 CERAMIC CAP.(AX) XM 3900pF/16V CCA1CMT0X392 4835 122 47677
C1437 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1438 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1439 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1440 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1441 ELECTROLYTIC CAP. 1µF/50V ±20% H7 CE1JMAVSL1R0 4835 124 47014
C1442 CERAMIC CAP.(AX) 0.047µF/50V ±10% (B) CA1J473TU011 4835 122 47083
C1443 CERAMIC CAP.(AX) 0.047µF/50V ±10% (B) CA1J473TU011 4835 122 47083
C1444 ELECTROLYTIC CAP. 22µF/16V ±20% H7 CE1CMAVSL220 4835 124 47175
C1445 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1446 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1447 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1449 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1452 CERAMIC CAP.(AX) 0.022µF/25V +80/-20%
(F) CCA1EZTFZ223 4835 122 47736
C1627 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1628 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1629 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
Ref. #Description ID No. Part No.
C1631 ELECTROLYTIC CAP. 220µF/16V ±20% or CE1CMASDL221 4835 124 47209
ELECTROLYTIC CAP. 220µF/16V ±20% CE1CMASTL221 4835 124 47081
C1634 ELECTROLYTIC CAP. 100µF/16V ±20% or CE1CMASDL101 4835 124 47033
ELECTROLYTIC CAP. 100µF/16V ±20% CE1CMASTL101 4835 124 47033
C1635 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1636 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1701 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1722 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1732 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1747 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1748 CERAMIC CAP.(AX) 0.033µF/50V ±10% (B) CA1J333TU011 4822 121 42772
C1749 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1751 ELECTROLYTIC CAP. 47µF/25V ±20% or CE1EMASDL470 4835 124 47102
ELECTROLYTIC CAP. 47µF/25V ±20% CE1EMASTL470 4835 124 47102
C1752 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1753 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1754 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1755 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1756 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1757 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1758 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1759 ELECTROLYTIC CAP. 22µF/16V ±20% H7 CE1CMAVSL220 4835 124 47175
C1760 CERAMIC CAP.(AX) 4700pF/16V ±10% (X) CCA1CKT0X472 4835 122 47743
C1761 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1762 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1763 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1764 ELECTROLYTIC CAP. 220µF/6.3V ±20% or CE0KMASDL221 4835 124 47168
ELECTROLYTIC CAP. 220µF/6.3V ±20% CE0KMASTL221 4835 124 47168
C1765 CERAMIC CAP.(AX) 0.022µF/25V +80/-20%
(F) CCA1EZTFZ223 4835 122 47736
C1766 ELECTROLYTIC CAP. 2.2µF/50V ±20% or CE1JMASDL2R2 4835 124 47086
ELECTROLYTIC CAP. 2.2µF/50V ±20% CE1JMASTL2R2 4835 124 47049
C1767 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1768 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1769 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1770 CERAMIC CAP.(AX) 4700pF/16V ±10% (X) CCA1CKT0X472 4835 122 47743
C1771 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1772 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1773 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1774 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1775 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1776 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
Ref. #Description ID No. Part No.
20030411 1-10-3 TD857EL
C1777 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1778 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1779 ELECTROLYTIC CAP. 2.2µF/50V ±20% or CE1JMASDL2R2 4835 124 47086
ELECTROLYTIC CAP. 2.2µF/50V ±20% CE1JMASTL2R2 4835 124 47049
C1780 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1781 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1782 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1783 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1784 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1786 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1787 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1788 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1789 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1790 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1791 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1792 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1793 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1794 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1795 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1797 ELECTROLYTIC CAP. 100µF/16V ±20% or CE1CMASDL101 4835 124 47033
ELECTROLYTIC CAP. 100µF/16V ±20% CE1CMASTL101 4835 124 47033
C1798 ELECTROLYTIC CAP. 100µF/6.3V ±20% or CE0KMASDL101 4835 124 47165
ELECTROLYTIC CAP. 100µF/6.3V ±20% CE0KMASTL101 4835 124 47263
C1800 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1802 ELECTROLYTIC CAP. 22µF/50V ±20% or CE1JMASDL220 4835 124 47051
ELECTROLYTIC CAP. 22µF/50V ±20% CE1JMASTL220 4835 124 47051
C1803 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
C1804 ELECTROLYTIC CAP. 100µF/16V ±20% or CE1CMASDL101 4835 124 47033
ELECTROLYTIC CAP. 100µF/16V ±20% CE1CMASTL101 4835 124 47033
C1805 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1806 ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL1R0 4835 124 47305
ELECTROLYTIC CAP. 1µF/50V ±20% or CE1JMASDL010 4835 124 47014
ELECTROLYTIC CAP. 1µF/50V ±20% CE1JMASTL1R0 4835 124 47014
C1807 CERAMIC CAP.(AX) 560pF/50V ±10% (B) CCA1JKT0B561 4835 122 47206
C1808 CERAMIC CAP.(AX) 560pF/50V ±10% (B) CCA1JKT0B561 4835 122 47206
C1809 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1810 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1812 ELECTROLYTIC CAP. 1000µF/16V ±20% or CE1CMZPDL102 4835 124 47005
ELECTROLYTIC CAP. 1000µF/16V
±20%(VR/HC) CE1CMZNTL102 4835 124 47005
C1814 ELECTROLYTIC CAP. 330µF/16V ±20% or CE1CMASDL331 4835 124 47008
ELECTROLYTIC CAP. 330µF/16V ±20% CE1CMASTL331 4835 124 47409
C1815 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1816 ELECTROLYTIC CAP. 330µF/16V ±20% or CE1CMASDL331 4835 124 47008
Ref. #Description ID No. Part No.
ELECTROLYTIC CAP. 330µF/16V ±20% CE1CMASTL331 4835 124 47409
C1823 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1824 ELECTROLYTIC CAP. 10µF/50V ±20% or CE1JMASDL100 4835 124 47202
ELECTROLYTIC CAP. 10µF/50V ±20% CE1JMASTL100 4835 124 47037
C1825 CERAMIC CAP.(AX) 0.022µF/25V +80/-20%
(F) CCA1EZTFZ223 4835 122 47736
C1826 ELECTROLYTIC CAP. 470µF/16V ±20% or CE1CMASDL471 4835 124 47286
ELECTROLYTIC CAP. 470µF/16V ±20% CE1CMASTL471 4835 220 17118
C1854 ELECTROLYTIC CAP. 22µF/16V ±20% H7 CE1CMAVSL220 4835 124 47175
C1856 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1857 ELECTROLYTIC CAP. 33µF/6.3V ±20% H7 CE0KMAVSL330 4835 124 47169
C1858 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1859 CERAMIC CAP.(AX) 0.1µF/50V +80/-20% (F) CCA1JZTFZ104 4835 122 47731
C1860 CERAMIC CAP.(AX) 1000pF/50V ±10% (B) CCA1JKT0B102 4835 122 47004
C1862 CERAMIC CAP.(AX) 0.01µF/50V ±10% (B) CCA1JKT0B103 ---- --- -----
C1863 ELECTROLYTIC CAP. 4.7µF/50V ±20% or CE1JMASDL4R7 4835 124 47088
ELECTROLYTIC CAP. 4.7µF/50V ±20% CE1JMASTL4R7 4835 124 47506
C1865 CERAMIC CAP.(AX) 1200pF/16V ±10% (X) CCA1CKT0X122 4835 122 47739
C1866 CERAMIC CAP.(AX) 2700pF/16V ±10% (X) CCA1CKT0X272 4835 122 47728
C1872 ELECTROLYTIC CAP. 47µF/25V ±20% H7 CE1EMAVSL470 4835 124 47084
C1873 ELECTROLYTIC CAP. 100µF/16V ±20% or CE1CMASDL101 4835 124 47033
ELECTROLYTIC CAP. 100µF/16V ±20% CE1CMASTL101 4835 124 47033
C1874 CERAMIC CAP. 470pF/100V ±10% (B) or CCD2AKS0B471 4835 122 47691
CERAMIC CAP. 470pF/500V ±10% (B) CCD2JKS0B471 4835 122 47211
C1875 FILM CAP.(P) 0.018µF/100V ±5% or CMA2AJS00183 4835 121 47665
FILM CAP.(P) 0.018µF/50V ±5% CA1J183MS029 4822 121 42701
CONNECTORS
CN1301 CONNECTOR BASE 12P TUC-P12P-B1 J3TUA12TG001 ---- --- -----
CN1802 STRAIGHT CONNECTOR BASE 00 8283
0212 00 000 or J383C02UG002 ---- --- -----
STRAIGHT PIN HEADER, 2P 173981-2 1770258 ---- --- -----
CN1803 TWG CONNECTOR 19P TWG-P19X JCTWA19TG001 ---- --- -----
CN1804 TWG CONNECTOR 19P TWG-P19X JCTWA19TG001 ---- --- -----
CN1805 TWG CONNECTOR 07P TWG-P07P-A1 J3TWA07TG001 ---- --- -----
DIODES
D1201 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1203 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1204 LED LTL-4214M1 or NPQZLTL4214M 4835 130 87149
LED(RED)L-FORMING LT1814G-81-FL or NP4Z0LT1814G 4835 130 87149
LED L-53HT or NP4Z000L53HT 4835 130 87144
LED LAMP 333HT/F45-50K or NPWK333HTF45 4835 130 87149
LED LAMP 333HT/F45-50L or NPWL333HTF45 4835 130 87149
LED LAMP 333HT/F45-50M NPWM333HTF45 4835 130 87149
D1205 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1206 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1207 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1208 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1210 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1213 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1216 LED LAMP 333GT/F45-50 or NPWZ3GTF4550 4835 130 87165
LED(GREEN) LTL-4234M1 NPZZ0LTL4234 4835 130 87165
D1217 LED LTL-4214M1 or NPQZLTL4214M 4835 130 87149
LED(RED)L-FORMING LT1814G-81-FL or NP4Z0LT1814G 4835 130 87149
LED L-53HT or NP4Z000L53HT 4835 130 87144
LED LAMP 333HT/F45-50K or NPWK333HTF45 4835 130 87149
LED LAMP 333HT/F45-50L or NPWL333HTF45 4835 130 87149
LED LAMP 333HT/F45-50M NPWM333HTF45 4835 130 87149
Ref. #Description ID No. Part No.
20030411 1-10-4 TD857EL
D1219 ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
D1224 LED SIR-563ST3F P or QPQPS1R563ST 4835 130 87163
LED SIR-563ST3F Q QPQQS1R563ST 4835 130 87162
D1227 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
D1229 ZENER DIODE MTZJT-7715B or QDTB00MTZJ15 4835 130 37604
ZENER DIODE DZ-15BSBT265 NDTB00DZ15BS 4835 130 38029
D1230 ZENER DIODE MTZJT-7715B or QDTB00MTZJ15 4835 130 37604
ZENER DIODE DZ-15BSBT265 NDTB00DZ15BS 4835 130 38029
D1231 ZENER DIODE MTZJT-7718A or QDTA00MTZJ18 4835 130 37784
ZENER DIODE DZ-18BSAT265 NDTA00DZ18BS 4835 130 38031
D1302 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1303 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1304 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1305 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1306 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1307 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1308 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1309 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1311 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1318 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1351 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1352 ZENER DIODE MTZJT-779.1B or QDTB0MTZJ9R1 4835 130 37506
ZENER DIODE DZ-9.1BSBT265 NDTB0DZ9R1BS 4835 130 38028
D1401 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1632 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1633 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1635 #SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
#SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1638 #SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
#SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1640 #SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
#SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1801 #SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
#SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1806 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1807 SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1964 #SWITCHING DIODE 1SS133(T-77) or QDTZ001SS133 4835 130 37235
#SWITCHING DIODE 1N4148 NDTZ001N4148 4835 130 37048
D1965 #ZENER DIODE MTZJT-776.2B or QDTB0MTZJ6R2 4835 130 37593
#ZENER DIODE DZ-6.2BSBT265 NDTB0DZ6R2BS 4835 130 38039
ICS
IC1201 IC, SERVO/SYSTEM CONTROL/TV/OSD/
TIMER MICROCONTROLLER
M37762MCA-BA4GP
QSZAA0RMB169 4835 209 17682
IC1202 IC, MEMORY BR24C02F-W or QSMBA0SRM003 4835 209 47446
IC, MEMORY AT24C02N-10SC or NSMMA0SAZ012 4835 209 47434
IC, MEMORY (EEPROM) M24C02-MN6 or NSMMA0SSS028 4835 209 47434
IC, MEMORY BR24C02F or QSMMA0SRM003 4835 209 47446
IC, MEMORY EEPROM CAT24WC02JI or NSZBA0SBG001 4835 209 47596
IC, MEMORY (EEP-ROM) M24C02-WMN6 NSZAA0SSS004 4835 209 47609
Ref. #Description ID No. Part No.
IC1301 IC, CHROMA/DEFLECTION SIGNAL PRO-
CESS M61275FP or QSZAA0RMB133 4835 209 47607
IC, CHROMA/DEFLECTION SIGNAL PRO-
CESS M61275FP-61 QSZAB0RMB133 4835 209 17683
IC1401 IC, VIDEO/AUDIO SIGNAL PROCESS
LA71091M QSZBA0RSY012 4835 209 47583
IC1602 #IC, +5V REGULATOR KIA7805API or NSBBA0SJY011 4835 209 47498
#IC, +5V REGULATOR KA7805A or NSZBA0SF3052 4835 209 47592
#IC, +5V REGULATOR AN7805F AN7805F 4835 209 87259
IC1751 IC, MTS/SAP/Hi-Fi AUDIO PROCESS/Hi-Fi
HEAD AMP LA72670M QSZBA0RSY034 4835 209 47614
IC1801 IC, AUDIO AMP AN17805A QSZBA0SMS007 4835 209 47601
IC1802 IC, OUTPUT SELECT TC4053BF(N) or QSMBA0STS002 4835 209 47549
IC, OUTPUT SELECT CD4053BCSJX NSZBA0TF3071 4835 209 47611
COILS
L1001 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1002 INDUCTOR 47µH-J-26T or LLAXJATTU470 4835 157 58271
INDUCTOR 47µH-K-26T LLAXKDTKA470 4835 157 57375
L1202 INDUCTOR 1.0µH-J-26T or LLAXJATTU010 4835 157 58144
INDUCTOR 1.0µH-K-26T LLAXKDTKA1R0 4835 157 58144
L1203 MICRO INDUCTOR 0.22UH LLARKBSTUR22 4835 157 58278
L1211 CHOKE COIL 47µH-K or LLBD00PKV007 4835 157 58208
CHOKE COIL 47µH-K LLBD00PKV005 4835 157 58208
L1302 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1402 INDUCTOR 22µH-J-26T or LLAXJATTU220 4835 157 57641
INDUCTOR 22µH-K-26T LLAXKDTKA220 4835 157 57641
L1403 CHOKE COIL 47µH-K or LLBD00PKV007 4835 157 58208
CHOKE COIL 47µH-K LLBD00PKV005 4835 157 58208
L1404 CHOKE COIL 47µH-K or LLBD00PKV007 4835 157 58208
CHOKE COIL 47µH-K LLBD00PKV005 4835 157 58208
L1405 INDUCTOR 47µH-J-26T or LLAXJATTU470 4835 157 58271
INDUCTOR 47µH-K-26T LLAXKDTKA470 4835 157 57375
L1751 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1752 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1802 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1803 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1804 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1806 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1807 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1871 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
L1872 INDUCTOR 47µH-K-5FT or LLARKBSTU470 4835 157 57375
INDUCTOR 47µH-K-5FT LLARKDSKA470 4835 157 57375
TRANSISTORS
Q1010 BUFFER 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
BUFFER 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
BUFFER 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
BUFFER KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
BUFFER KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
BUFFER 2SC1815-GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1205 RESET 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
RESET 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
RESET 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
RESET KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
RESET KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
RESET 2SC1815-GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1206 T-REEL MID-32A22 NPWZM1D32A22 4835 130 48231
Q1207 REC LED DRIVE 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
REC LED DRIVE 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
REC LED DRIVE 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
REC LED DRIVE KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
REC LED DRIVE KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
REC LED DRIVE 2SC1815-GR(TPE2)
"NPN" QQS102SC1815 4835 130 47358
Q1210 TV/VCR LED DRIVE 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
TV/VCR LED DRIVE 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
TV/VCR LED DRIVE 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
TV/VCR LED DRIVE KTC3199(GR) "NPN"
or NQS10KTC3199 4835 130 47914
Ref. #Description ID No. Part No.
20030411 1-10-5 TD857EL
TV/VCR LED DRIVE KTC3198(GR) "NPN"
or NQS40KTC3198 4835 130 47946
TV/VCR LED DRIVE 2SC1815-GR(TPE2)
"NPN" QQS102SC1815 4835 130 47358
Q1211 DVD LED DRIVE 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
DVD LED DRIVE 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
DVD LED DRIVE 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
DVD LED DRIVE KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
DVD LED DRIVE KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
DVD LED DRIVE 2SC1815-GR(TPE2)
"NPN" QQS102SC1815 4835 130 47358
Q1212 SWITCHING JACK-MUTE 2SA1175(F)
"PNP" or QQSF02SA1175 4835 130 47645
SWITCHING JACK-MUTE KTA1267(GR)
"PNP" or NQS10KTA1267 4835 130 47913
SWITCHING JACK-MUTE KTA1266(GR)
"PNP" or NQS40KTA1266 4835 130 47422
SWITCHING JACK-MUTE 2SA1015-
GR(TPE2) "PNP" QQS102SA1015 4835 130 47399
Q1301 SWITCHING 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
SWITCHING 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
SWITCHING 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
SWITCHING KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
SWITCHING KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
SWITCHING 2SC1815-GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1351 SWITCHING SPOT-KILL 2SC2785(F) "NPN"
or QQSF02SC2785 4835 130 47722
SWITCHING SPOT-KILL 2SC2785(H) "NPN"
or QQSH02SC2785 4835 130 47722
SWITCHING SPOT-KILL 2SC2785(J) "NPN"
or QQSJ02SC2785 4835 130 47722
SWITCHING SPOT-KILL KTC3199(GR)
"NPN" or NQS10KTC3199 4835 130 47914
SWITCHING SPOT-KILL KTC3198(GR)
"NPN" or NQS40KTC3198 4835 130 47946
SWITCHING SPOT-KILL 2SC1815-
GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1401 BUFFER 2SA1175(F) "PNP" or QQSF02SA1175 4835 130 47645
BUFFER KTA1267(GR) "PNP" or NQS10KTA1267 4835 130 47913
BUFFER KTA1266(GR) "PNP" or NQS40KTA1266 4835 130 47422
BUFFER 2SA1015-GR(TPE2) "PNP" QQS102SA1015 4835 130 47399
Q1402 BUFFER 2SA1175(F) "PNP" or QQSF02SA1175 4835 130 47645
BUFFER KTA1267(GR) "PNP" or NQS10KTA1267 4835 130 47913
BUFFER KTA1266(GR) "PNP" or NQS40KTA1266 4835 130 47422
BUFFER 2SA1015-GR(TPE2) "PNP" QQS102SA1015 4835 130 47399
Q1403 BUFFER 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
BUFFER 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
BUFFER 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
BUFFER KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
BUFFER KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
BUFFER 2SC1815-GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1608 P-ON+5V SWITCHING 2SC2120-O-TPE2
"NPN" or QQS002SC2120 4835 130 47756
P-ON+5V SWITCHING 2SC2120-Y(TPE2)
"NPN" QQSY02SC2120 4835 130 48047
Q1611 P-ON+5V SWITCHING 2SD400(F) QQUF002SD400 4835 130 47433
Q1612 SWITCHING P-DOWN KRA103M "PNP" or NQSZ0KRA103M 4835 130 47907
SWITCHING P-DOWN BN1F4M-T QQSZ00BN1F4M 4835 130 48201
Q1613 P-ON+5V SWITCHING 2SC2120-O-TPE2
"NPN" or QQS002SC2120 4835 130 47756
P-ON+5V SWITCHING 2SC2120-Y(TPE2)
"NPN" QQSY02SC2120 4835 130 48047
Q1701 INVERTER 2SC2785(F) "NPN" or QQSF02SC2785 4835 130 47722
INVERTER 2SC2785(H) "NPN" or QQSH02SC2785 4835 130 47722
INVERTER 2SC2785(J) "NPN" or QQSJ02SC2785 4835 130 47722
INVERTER KTC3199(GR) "NPN" or NQS10KTC3199 4835 130 47914
INVERTER KTC3198(GR) "NPN" or NQS40KTC3198 4835 130 47946
INVERTER 2SC1815-GR(TPE2) "NPN" QQS102SC1815 4835 130 47358
Q1803 SWITCHING DVD-ON-ON KRC103M "NPN"
or NQSZ0KRC103M 4835 130 47909
SWITCHING DVD-ON-ON 2SC3400 "NPN"
or 2SC3400Z 4835 130 47428
SWITCHING DVD-ON-ON BA1F4M-T QQSZ00BA1F4M 4835 130 48204
Q1806 SWITCHING D-REC-ON KRC103M "NPN"
or NQSZ0KRC103M 4835 130 47909
Ref. #Description ID No. Part No.
SWITCHING D-REC-ON 2SC3400 "NPN" or 2SC3400Z 4835 130 47428
SWITCHING D-REC-ON BA1F4M-T QQSZ00BA1F4M 4835 130 48204
Q1871 SWITCHING 2SA1175(F) "PNP" or QQSF02SA1175 4835 130 47645
SWITCHING KTA1267(GR) "PNP" or NQS10KTA1267 4835 130 47913
SWITCHING KTA1266(GR) "PNP" or NQS40KTA1266 4835 130 47422
SWITCHING 2SA1015-GR(TPE2) "PNP" QQS102SA1015 4835 130 47399
Q1872 BIAS OSC 2SC2120-O-TPE2 "NPN" or QQS002SC2120 4835 130 47756
BIAS OSC 2SC2120-Y(TPE2) "NPN" QQSY02SC2120 4835 130 48047
Q1873 SWITCHING PB-ON 2SC3331(T) "NPN" or QSC3331TNPAA 4835 130 47549
SWITCHING PB-ON 2SC3331(U) "NPN" or QSC3331UNPAA 4835 130 47549
SWITCHING PB-ON 2SC1815-GR(TPE2)
"NPN" QQS102SC1815 4835 130 47358
Q1874 SWITCHING PB-ON 2SC3331(T) "NPN" or QSC3331TNPAA 4835 130 47549
SWITCHING PB-ON 2SC3331(U) "NPN" or QSC3331UNPAA 4835 130 47549
SWITCHING PB-ON 2SC1815-GR(TPE2)
"NPN" QQS102SC1815 4835 130 47358
Q1875 SWITCHING D-REC-OFF KRA103M "PNP"
or NQSZ0KRA103M 4835 130 47907
SWITCHING D-REC-OFF BN1F4M-T QQSZ00BN1F4M 4835 130 48201
RESISTORS
R1001 CARBON RES. 1/4W 100 ±5% or RCX4JATZ0101 4835 110 57003
CARBON RES. 1/6W 100 ±5% RCX6JATZ0101 4835 111 37161
R1003 PCB JUMPER D0.6-P5.0 JW5.0T ---- --- -----
R1006 CARBON RES. 1/4W 100 ±5% or RCX4JATZ0101 4835 110 57003
CARBON RES. 1/6W 100 ±5% RCX6JATZ0101 4835 111 37161
R1007 CARBON RES. 1/4W 100 ±5% or RCX4JATZ0101 4835 110 57003
CARBON RES. 1/6W 100 ±5% RCX6JATZ0101 4835 111 37161
R1008 CARBON RES. 1/4W 6.8k ±5% or RCX4JATZ0682 4835 110 57193
CARBON RES. 1/6W 6.8k ±5% RCX6JATZ0682 4835 111 37311
R1010 CARBON RES. 1/4W 100k ±5% or RCX4JATZ0104 4835 110 57185
CARBON RES. 1/6W 100k ±5% RCX6JATZ0104 4835 110 57068
R1011 CARBON RES. 1/4W 27k ±5% or RCX4JATZ0273 4835 111 37182
CARBON RES. 1/6W 27k ±5% RCX6JATZ0273 4835 111 37182
R1012 CARBON RES. 1/4W 470 ±5% or RCX4JATZ0471 4835 110 57167
CARBON RES. 1/6W 470 ±5% RCX6JATZ0471 4835 111 37193
R1013 CARBON RES. 1/4W 56 ±5% or RCX4JATZ0560 4835 110 57191
CARBON RES. 1/6W 56 ±5% RCX6JATZ0560 4835 111 37197
R1200 CARBON RES. 1/4W 1k ±5% or RCX4JATZ0102 4835 110 57025
CARBON RES. 1/6W 1k ±5% RCX6JATZ0102 4835 111 37162
R1201 CARBON RES. 1/4W 4.7k ±2% or RCX4GATZ0472 4835 110 57278
CARBON RES. 1/6W 4.7k ±2% RCX6GATZ0472 4835 111 37194
R1202 CARBON RES. 1/4W 22k ±2% or RCX4GATZ0223 4835 110 57283
CARBON RES. 1/6W 22k ±2% RCX6GATZ0223 4835 111 37177
R1203 CARBON RES. 1/4W 470 ±2% or RCX4GATZ0471 4835 110 57167
CARBON RES. 1/6W 470 ±2% RCX6GATZ0471 4835 110 57167
R1204 CARBON RES. 1/4W 1.5k ±2% or RCX4GATZ0152 4835 110 57186
CARBON RES. 1/6W 1.5k ±2% RCX6GATZ0152 4835 111 37306
R1205